4
4.0
Oct 14, 2021
10/21
by
Matthew Herberg (mattherberg)
data
eye 4
favorite 0
comment 0
Beefed up the original design to support the rod more. Printing: I just printed it flat. 100% infil PLA or PLA + Thank you to the original designer as you saved me in a pinch.
Topics: thingiverse, hornady_LNL_AP, stl, hornady_LNL, DIY, hornady, Hornady_Lock-N-Load
4
4.0
Jan 7, 2021
01/21
by
Dan Jost (Gndan)
data
eye 4
favorite 0
comment 0
This bullet feeder is designed to sit on top of a 9mm Hornady Bullet Feeder Die. Tubes are prefilled with bullets and manually rotated to a new full cylinder as the bullets are emptied into the die. Assembly/Install: 1) I designed the fit to print with a slight interference on the die so the first time you put it on you work it back and forth and let the knurling of the die top "Hone" the bore to the exact size. Note that you might have to remove it a couple times to remove the...
Topics: Hornady_Lock-N-Load, stl, hornady_LNL, hornady, hornady_LNL_AP, thingiverse, Machine Tools
5
5.0
Jan 16, 2021
01/21
by
Aaron Hrenak (Renakx)
data
eye 5
favorite 0
comment 0
This is a case feeder for the Hornady Lock and Load AP press, Inspired by the design by Bartje64. While the design was influenced by Barteje64's, all of these components were created new (from scratch) in Autodesk Inventor. This design still utilizes their case selector V5 (https://www.thingiverse.com/thing:3844226/files), so you will need to print theirs to optimize the use of this print, otherwise a tube cut to the desired length could be substituted. You will also need to work out the...
Topics: hornady, hornady_LNL, thingiverse, Sport & Outdoors, hornady_LNL_AP, Hornady_Lock-N-Load, stl
4
4.0
Nov 8, 2021
11/21
by
Aaron Hrenak (Renakx)
data
eye 4
favorite 0
comment 0
This is an upgrade of the Hornady AP Case Feeder - Bearing Based - V1.0 released in January 2021, available here : https://www.thingiverse.com/thing:4719734. V2.0 was never released publicly. Use the link above for instructions and materials needed. This will require more than 10 bearings now, so just buy 20. Note, for users with Inline Fabrication Mounts, use LowerSlide_FlatV3.obj. For users of the standard set bin mount use LowerSlide_Flat_BaseSetV3.obj All of the parts for this assembly have...
Topics: Sport & Outdoors, hornady, stl, hornady_LNL_AP, thingiverse, APCaseFeeder_Bearing, hornady_LNL,...
5
5.0
Mar 13, 2021
03/21
by
John Morgan (Lunatic728)
data
eye 5
favorite 0
comment 0
Press Hornady LNL progressive press with a Hornady automatic case feeder. I was tired of the #4 V shaped case feeder always tipping the case before going into the shell holder. This one is specifically made for the 45 ACP case and has an extra little bump at the bottom to catch the rim and keep it from tipping while going into the shell holder. 03/21/2020 I have updated the file so the case feeder fits better and centers the hole properly.
Topics: stl, Sport & Outdoors, thingiverse, hornady_LNL
8
8.0
Apr 18, 2021
04/21
by
Nathan Darnell (nathandarnell)
data
eye 8
favorite 0
comment 0
This is modeled after the Hornady Lock-N-Load® Control Panel Primer Level Sensor. It slips over the primer tube and the clamping shaft collar from McMaster will activate a microswitch when the primers drop to a certain level. The hole at the top is meant to help guide the tube when you add more primers so you don't need to take this off when you run out. Microswitch that I found on Digikey with 40gf:...
Topics: hornady_LNL, thingiverse, Parts, stl, hornady
7
7.0
Mar 16, 2021
03/21
by
Cm Mil (cmil1207)
data
eye 7
favorite 0
comment 0
This is a tray and some clips I created to hold the projectiles when reloading. It attaches directly to the arm of the press without any tools. Just simple push them on and the extensions will hold things in place. There are two types of clips here. One with extensions (things that stick out from the arms) of 1mm and another of extensions that stick out of 1.5mm. I have two of them because if the 1mm is too loose, you can sand the 1.5mm clip down to get things just right. The 1mm clip fits my...
Topics: hornady_LNL, reloading, hornady, stl, thingiverse, Other
4
4.0
May 20, 2021
05/21
by
John Morgan (Lunatic728)
data
eye 4
favorite 0
comment 0
Just another die and shell plate holder
Topics: Sport & Outdoors, hornady_LNL, thingiverse, hornady, stl
6
6.0
Jan 4, 2021
01/21
by
John Morgan (Lunatic728)
data
eye 6
favorite 0
comment 0
This will hold 6 reloading dies with the Hornady LNL bushing and the shell plate
Topics: stl, hornady_LNL, hornady, Sport & Outdoors, thingiverse
4
4.0
Apr 13, 2021
04/21
by
Aaron Gee (afgmaker)
data
eye 4
favorite 0
comment 0
This is a replacement for a Hornady Lock-N-Load primer tube support (Part number 398318). It has 4 feet instead of 3 and goes 1mm deeper into the primer tub housing than the stock part. Made it to help a friend who had broken his and didn't want to wait the 3-4 days to get a stock one.
Topics: thingiverse, reloading, stl, Sport & Outdoors, hornady_LNL
4
4.0
Jan 4, 2021
01/21
by
John Morgan (Lunatic728)
data
eye 4
favorite 0
comment 0
This will hold 6 dies with the LNL bushing and the associated shell plate.
Topics: stl, hornady_LNL, hornady, Sport & Outdoors, thingiverse
7
7.0
Mar 18, 2021
03/21
by
John Meyer (k3usr)
data
eye 7
favorite 0
comment 0
Makes the old primers go into the tray without using the priming system on the Hornady Classic single stage press.
Topics: hornady_LNL, Sport & Outdoors, hornady, stl, thingiverse
4
4.0
Mar 26, 2021
03/21
by
John Morgan (Lunatic728)
data
eye 4
favorite 0
comment 0
Holds 6 reloading dies with the Hornady LNL bushing and shell plate
Topics: stl, hornady_LNL, thingiverse, Sport & Outdoors, hornady
4
4.0
Oct 14, 2021
10/21
by
Brian Ng (bfbirdy)
data
eye 4
favorite 0
comment 0
I saw the STL for the cover by mighty_mace (https://www.thingiverse.com/thing:2778815) however after downloading the file, in Cura I had some scaling issues and wasn't completely sure on it so I decided to just do a quick and easy minimal print instead. I used 3 line walls, 2 top layers, 2 bottom layers and 50% infill (probably overkill) and used only 2g of filament with a printing time of 17 minutes at 70mm/s. Simple, straight to the point so it is nothing fancy.
Topics: thingiverse, stl, hornady_LNL, 3D Printing, powder
4
4.0
Jul 3, 2021
07/21
by
Norbert Goder (nor899)
data
eye 4
favorite 0
comment 0
Fixed base for the bottle with the ejected primers.
Topics: Bottle Stand, Lock-N-Load, Primer, Hobby, primers, LNL, hornady_LNL_AP, hornady_LNL, Hornady,...
4
4.0
Jan 8, 2021
01/21
by
ROBINSON GEDRA (RGEDRA)
data
eye 4
favorite 0
comment 0
This is a "label" to indicate the direction Up or Down when in use of the Hornady Prep Center.
Topics: Other, stl, hornady_LNL, hornady, prep center, thingiverse
3
3.0
Jan 18, 2022
01/22
by
Alex Gross (hasar)
data
eye 3
favorite 0
comment 0
Die Hülsenzuführung mit 7 Tube von LEE war für mich zu gross. Dann verändere ich (https://www.thingiverse.com/thing:4564023) Thing von mgrabo24 auf 5 Tuben mit kleineren Verbesserungen. Das Ergebnis sieht leicht und bittet ausreichende Fühlung für Hülsen. CaseSelector wurde auch bearbeitet (https://www.thingiverse.com/thing:3844226).
Topics: Parts, thingiverse, tube modification, stl, hornady_LNL_AP
3
3.0
Jul 25, 2021
07/21
by
Craig Styles (Kda652)
data
eye 3
favorite 0
comment 0
This is a completed cartridge counter holder designed to be mounted on the Hornady Lock and Load Progressive press. Mounts directly to the back from the pre-existing threated holes on the back of the press. Allows you to get a count for the number of completed cartridges. Link for the counter on Amazon for $15. https://www.amazon.com/dp/B01875612U/ref=cm_sw_em_r_mt_dp_QDWRFBJ44TQNNBVGFBRB
Topics: thingiverse, hornady_LNL_AP, hornady, reloading_press, Sport & Outdoors, Hornady_Lock-N-Load,...
8
8.0
May 1, 2021
05/21
by
Tim Anders (Tanders587)
data
eye 8
favorite 0
comment 0
For those that have printed the Hornady LNL case feeder (https://www.thingiverse.com/thing:3844226) and are looking for a way to hook up a case collator, This is a your solution. This will accept the Dillon case feed adapters for you to easily adapt to multiple calipers. Here is the link to my openscad file to generator your own Dillon Case Feed adapters. https://www.thingiverse.com/thing:4787372
Topics: stl, Dillon, hornady_LNL_AP, hornady, thingiverse, Other
8
8.0
Jan 19, 2021
01/21
by
Nathan Darnell (nathandarnell)
data
eye 8
favorite 0
comment 0
This adapter lets the openBulletFeeder dropper tubes by AmmoMike83 mount to the Hornady Lock n' Load AP Bullet Feeder Die. I only have the 380/9mm version so I don't know if it fits other sizes or not. There is another adapter in the design, but this one fits more snugly and fits into the dropper tubes instead of around it. The 10mm large spring dropper tube seems to get the best results for 9mm bullets. Design in Onshape:...
Topics: hornady, hornady_LNL, thingiverse, Bullet_Feeder, Parts, stl
4
4.0
Jun 20, 2021
06/21
by
Josh Larkin (JoshEE4thewin)
data
eye 4
favorite 0
comment 0
Print Settings: 3 to 5 Walls 4 Top 4 Bottom 40+ % infill I Printed it exactly as shown in the image, with supports on the bottom. I uploaded the .sldprt, so feel free to modify as you would like.
Topics: Sport & Outdoors, hornady, hornady_LNL, thingiverse, stl, primers
10
10.0
Jan 16, 2021
01/21
by
Sebastian Cordes (Basti_1980)
data
eye 10
favorite 0
comment 0
Update 03/10/2019: Added a bigger version, wich is twice the size of the original one. Just a simple bolt on primercatcher with a little tray for the Hornady LNL Press. The tray should hold at least 100 - 200 primers.
Topics: hornady, primercatcher, hornady_LNL, primer, thingiverse, DIY, stl
3
3.0
Jan 18, 2022
01/22
by
Alex Gross (hasar)
data
eye 3
favorite 0
comment 0
Pulverfühlerdach für HORNADY LNL Pulverfühler
Topics: Parts, powder, thingiverse, stl, hornady_LNL, reloading_tools
11
11
Jan 19, 2021
01/21
by
(chrisjoonmiller)
data
eye 11
favorite 0
comment 0
I based the design off of the original adapter that comes with the LNL AP Press. My design has an extended top portion, which simplifies aligning the primer tube and primer pickup tool. This can be printed without supports.
Topics: hornady, primer_tube, hornady_LNL, thingiverse, Parts, Reloading, stl
5
5.0
Apr 4, 2021
04/21
by
Vil Coyote (Vilcoyote77)
data
eye 5
favorite 0
comment 0
Spacer set for a Hornady powder measure, when you use only one for multiple calibers: 9x19, 40S&W, 45acp, 10mm auto, 38sp and 357Mg. Set the lock ring at the correct high with one of these clips, and the others should fit perfectly! Designed to fit the chamfer of the Hornady powder measure but might work also with other brands.
Topics: thingiverse, hornady_LNL, Sport & Outdoors, stl, hornady, guns, reloading
10
10.0
Jan 15, 2021
01/21
by
Cihan Taktak (ctaktak)
data
eye 10
favorite 0
comment 0
My first published design. This is a mountable primer catcher for the Hornady Lock n Load. Simply mount the primer catcher to the side of a desk and run a flexible tube from the primer discharge chute to the catcher. Will hold a few thousand primers before needing to be emptied.
Topics: hornady, thingiverse, reloading, Sport & Outdoors, stl, hornady_LNL, primer
4
4.0
Mar 25, 2021
03/21
by
O C (OlivereCalderon)
data
eye 4
favorite 0
comment 0
This is an extension for the push rod on the hornady case feeder. It will give you an additional 8mm of extension. The push rod wont go up an additional 8mm, but it will make it to where it wont have to be unscrewed most of the way to give full extenion.
Topics: stl, Other, hornady_LNL, ammo plant, thingiverse, casefeeder, hornady
7
7.0
Jan 21, 2021
01/21
by
Kim (kimlundgren_)
data
eye 7
favorite 0
comment 0
Simple, non electric warning flag for the Hornady lnl ap primer feed. Just put it hanging from the rod on top of the primers, hole side up and the open end down. when you run out of primers it will relese from the rod falling to the floor. Highly effective and idiot proof. :)
Topics: hornady, handload, hornady_LNL, thingiverse, primer, Sport & Outdoors, stl
5
5.0
Mar 5, 2021
03/21
by
Nathan Darnell (nathandarnell)
data
eye 5
favorite 0
comment 0
**UPDATE 10/26/2019** - Thanks to Steve Straus for adding the buzzer code and finding buzzers that fit inside the main body. Added new Hornady and Dillon Main Bodies with 11.8mm holes for this buzzer: https://www.amazon.com/gp/product/B07VSHHFKJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 **UPDATE 10/15/2019** - Replaced Dillon Main Body resized to 65.5mm opening. **UPDATE 9/10/2019** - Made changes to the Github repository with some more clear explanations of wiring, assembly,...
Topics: stl, Dillon, powder, reloading, Electronics, hornady_LNL, hornady, thingiverse
5
5.0
Mar 5, 2021
03/21
by
Joel Bessette (quiksilverj)
data
eye 5
favorite 0
comment 0
This is a labeled case for the Hornady lock and load comparator set with the caliper anvil as well
Topics: stl, reloading, Tool Holders & Boxes, hornady_LNL, hornady, thingiverse
7
7.0
Mar 16, 2021
03/21
by
Sean Desbiens (juano2001)
data
eye 7
favorite 0
comment 0
Made this after I lost mine and since then saw that someone already has an enhanced version that is more true to the hornady design. This works as well if you dont like the Hornady one.
Topics: hornady_LNL, primer, LNL_AP, Sport & Outdoors, hornady, stl, thingiverse
13
13
Jan 18, 2021
01/21
by
O C (OlivereCalderon)
data
eye 13
favorite 0
comment 0
This is a primer tube and allen key holder for the rim of the Hornady / Dillon case feeders. It also has a large slot for a sharpie marker
Topics: Dillon, reloading, hornady, hornady_LNL, thingiverse, primer tube, Other, stl
4
4.0
Mar 13, 2021
03/21
by
arradan (arradan)
data
eye 4
favorite 0
comment 0
this is a set i made for hold a few hornady tools. you can glue ,use double sided tape or screw in wood. it hold the chamfer tool,kinetic hammer,case tray and the funnel.
Topics: thingiverse, hornady_LNL, tool_holder, hornady, stl, Tool Holders & Boxes
8
8.0
Mar 17, 2021
03/21
by
Robert Mappes (bobup)
data
eye 8
favorite 0
comment 0
Edit: Just uploaded V3 I added the two "wings" so it will lay right on the shoulders of the bin....can be glued in place or just left loose -------------------------------------------------------- In short, this is a funnel that I made for my LNL press. Longer story, I had fabbed up (before my Maker Select was given to me) a funnel i had bought and cut it to fit into the Akro-Mills bin that comes with the press, last picture of the set. With the 3D printer I decided to upgrade the...
Topics: hornady_LNL, reloading, Sport & Outdoors, Akro-Mils, stl, Funnel, thingiverse
5
5.0
Apr 4, 2021
04/21
by
Aaron Gee (afgmaker)
data
eye 5
favorite 0
comment 0
Clip on guide designed to prevent the primer follower from hitting the collator or anything else as you go through a cycle. It's a very simple clip that goes onto the powder hopper and the guide rode goes through it. Prior to this the guide rod kept hitting the collater that sits atop my 3d printed case feeder just after I filled the primers. If I didn't fill up the primary the follower would sit low enough that it wouldn't hit but that left me reloading it too often. This allows me to fill my...
Topics: thingiverse, Easy, stl, Tools, Hornady Lock-N-Load, Hornady_LNL
7
7.0
Mar 15, 2021
03/21
by
Rich Maley (Richm1224)
data
eye 7
favorite 0
comment 0
This is a Taper Throat Funnel for filling cases. It can be scaled to fit any caliber. The 9mm Sit over Funnel allows you to sit the funnel on a table directly over a 9mm case without having to handle case and funnel
Topics: reloading, Parts, thingiverse, useful, Dillon, hornady_LNL, stl, Hornady, Funnel
9
9.0
Apr 20, 2021
04/21
by
Harry Totzke (hairy2015)
data
eye 9
favorite 0
comment 0
Funnel for the Hornady lnl swage tool. Speeds up the process a lot. a .50 cal ammo can works as a perfect container for this. Youtube video- https://youtu.be/OhAafyd1Kk4 Feel free to tip if you would like!
Topics: thingiverse, stl, Funnel, Swage, Parts, Tool, reloading, hornady_LNL, hornady
3
3.0
Dec 1, 2021
12/21
by
High Caliber (Squitchypants)
data
eye 3
favorite 0
comment 0
Just a wall mount holder for the Hornady LnL AP press plates. Some have text, one has the hornady name. (No affiliation!). Nice thing is you can add them on as you add shellplates. See print notes for size.
Topics: ammo, reloading, shellplate, thingiverse, hornady_LNL, stl, Tool Holders & Boxes
14
14
Jan 18, 2021
01/21
by
Jody Stout (Stoutone)
data
eye 14
favorite 0
comment 0
For use on the Hornady Bullet feed dies. I ordered RCBS clear tubes. They fit down in the 45 acp feed die wouldn't fit in the 40. Until now ;) Fill your die up with bullets, so you know where to drill the hole for the clip
Topics: reloading, hornady_LNL, thingiverse, Hornady, Sport & Outdoors, 40_cal, stl
20
20
Jan 11, 2021
01/21
by
Michael Klumb (klumbmt)
data
eye 20
favorite 0
comment 0
This is a breakaway replacement piece for hornady lock n load progressive reloading press.
Topics: hornady, thingiverse, reloading, stl, reloading_press, Replacement Parts, hornady_LNL
4
4.0
Apr 27, 2021
04/21
by
arradan (arradan)
data
eye 4
favorite 0
comment 0
this is a wall mount for your standard powder measure (hornady,rcbs,lee...) use the best solidity as you can for safety precautions,i use PETG and 4 perimeter for wall and 60% filling honeycomb.
Topics: thingiverse, rifle, hornady_LNL, powder_measure, hornady, stl, Sport & Outdoors, RCBS
9
9.0
Jan 21, 2021
01/21
by
Barry Lewis (blewis3)
data
eye 9
favorite 0
comment 0
A part that supports the Bullet Feeder Design by AmmoMike83. After printing the variable hanging mount to attach the bullet feeder to my Hornady LNL case feeder, I noticed that the output spring would be too short based on where I wanted to attached it to my case feeder. I then redesigned the case feeder side of the variable hanging mount by increasing the length of the outside part to lower the case feeder to not stretch the spring and reach the bullet feeder die. I also shortened the inside...
Topics: reloading, hornady, bulletfeeder, thingiverse, hornady_LNL, bullet_feeder, DIY, openBulletFeeder,...
10
10.0
Mar 10, 2021
03/21
by
Lutz Fiedler (Air_)
data
eye 10
favorite 0
comment 0
powder funnel to fit onto powder hopper of Hornady LNL reloading press
Topics: reload, stl, thingiverse, hornady, reloading, Sport & Outdoors, hornady_LNL, reloading_press
4
4.0
Mar 25, 2021
03/21
by
Mike Pensinger (probrwr)
data
eye 4
favorite 0
comment 0
Power Supply End Covers for Mean Well RS-25-12 AC to DC Power Supply Simple covers for this power supply: https://amzn.to/2MIfozw
Topics: stl, 12vdc, hornady_LNL, thingiverse, open_bullet_feeder, Electronics, power_supply
3
3.0
Apr 20, 2022
04/22
by
Mathew Woolley (mammothguns)
data
eye 3
favorite 0
comment 0
I designed a center light for my Hornady LnL Press, Light is from eBay (eBay item number:203018246644). I printed with supports so the hex end would come out need.
Topics: thingiverse, hornady_LNL_AP, hornady, 3D Printer Accessories, reloading_press, stl
13
13
Jan 18, 2021
01/21
by
O C (OlivereCalderon)
data
eye 13
favorite 0
comment 0
This is a work in progress. At the time of this upload (1/15/18), i haven't tested it but in theory, it should work. I will be testing it in the next few days but am uploading the file so that anyone who wants to test and help tweak it can. In a nutshell, Hornady does not make a powder cop with an audible alarm. Dillon does but most of the hacks involve either drilling a hole in the press or grinding a notch in the side. hot it's designed to work - on the dillon powder cop you remove the pin...
Topics: powder alarm, powder cop, reloading, hornady, hornady_LNL, thingiverse, RCBS, Other, stl
12
12
Jan 18, 2021
01/21
by
Hau Tran (darkbobby)
data
eye 12
favorite 0
comment 0
Hold Hornady bullet Comparators basic sets plus an extra for 6.5mm Install pegboard holder on pegboard before gluing for proper alignment. Make sure to install near the top to you can remove it easily.
Topics: reloading, hornady, pegboard, Tool Holders & Boxes, tool, hornady_LNL, thingiverse, stl
8
8.0
Mar 3, 2021
03/21
by
Cm Mil (cmil1207)
data
eye 8
favorite 0
comment 0
This is a simple tool holder for my Hornady Lock-n-Load press. Its small enough to be out of the way and still be convenient. It has spots for four Allen keys and a brush. The four keys are: 5/16 - For the plate 5/32 - For the primer tube 1/8 - For the powder dispenser 3/32 - For the lock rings on the dies It uses clips I created that attach to the press arm without any tools, just push them on and the extensions will hold things in place. There are two types of clips here. One with extensions...
Topics: hornady, cartridge_reloading, Other, reloading, thingiverse, hornady_LNL, stl, reloading_tools
7
7.0
Jan 8, 2021
01/21
by
Robert Fischer (Fischkopf)
data
eye 7
favorite 0
comment 0
Hallo, Für meine Wiederladepresse Hornady Lock-N-Load AP habe ich eine Geschosszufuhr für das Kaliber .45 konstruiert. Mann kann alle fast alle Teile ohne Stützstruktur Drucken. Lediglich der Grundkörper habe ich auf dem Kopf mit Stützstruktur gedruckt. Man braucht zum zusammenbauen 2 mal M4x16 Schrauben,4 x M4 Unterlagscheiben und 1 oder 2 Gummibänder. Alle Teile habe ich mit einem Schleifpapier ein bisschen abgeschliffen damit sie sich leicht bewegen lassen. Zum Schluss habe ich noch...
Topics: Hornady_Lock-N-Load, stl, hornady, hornady_LNL_AP, Sport & Outdoors, thingiverse
11
11
Jan 18, 2021
01/21
by
Mike Mace (mighty_mace)
data
eye 11
favorite 0
comment 0
Made this to mount on the final station of my LNL press. A .5" piece of PVC pipe fits in the end of the chute and can "point" toward a catch bin. That way it frees up your hand from needing to remove the swaged case on each stroke of the press. The cases travel down the chute into your catch bin. The first time I printed it, there was too much clearance and it was pretty loose. I made an adjustment and it should now be good to go. If you print one, let me know if it fits properly...
Topics: reloading, hornady, AR15, shooting, hornady_LNL, thingiverse, reloading_press, Sport &...
