8
8.0
Jan 17, 2021
01/21
by
(krokus57)
data
eye 8
favorite 0
comment 0
**_Karcher vc6 hose fastening mechanism._** I make it for use [PcTronics](https://www.thingiverse.com/PcTronics/about)'s [Cyclone Dust Collector (Remix)](https://www.thingiverse.com/thing:1447214) with my Karcher VC6300 vacuum. I think it sutable for all VC6 series. There are to versions: - **karcher_glued**: this have stronger latch. You need to glue latch after printing. - **karcher_without_glue**: This have weaker latch, but it's strong enough if you use it in static conditions (for CNC for...
Topics: Household Supplies, hose_clamp, dust, hose_adapter, separator, thingiverse, cyclone, karcher, vc6,...
6
6.0
Jan 6, 2021
01/21
by
David Obregon (WhoKnowsWho2)
data
eye 6
favorite 0
comment 0
Got tired of trying to hook up the 4" dust collector hose in my garage to various tools. Made a 96mm coupler for the hose to connect to a Ridgid R45171 Table saw (opening 63mm), Ridgid R4331 Planer that was used and missing the adapter (58.2x68.2mm), a Tradesman jointer (opening 67.5mm), and Shop Vac solid extension piece for accessories (opening 64.1mm). Edit - add Ridgid oscillating spindle sander 96mm coupler on 3/7/2020, 75.1mm outer diamter. Add 96mm coupler for small shop vac hose,...
Topics: Parts, hose_connector, stl, dust collector, hose, woodworking, dust, hose_adapter,...
4
4.0
Jul 3, 2021
07/21
by
David Hidding (dehidding)
data
eye 4
favorite 0
comment 0
Had to replace the vacuum hose end because a dog chewed it up. Print in the material of your choice - PETG, ABS, GF-PETG Print it, supports not needed, snap the hose over the end - done. This is designed to be tighter then the original to reduce leakage.
Topics: Vacuum_Hose, fridgidare, Ridgid_vacuum, Vacuum_Adapter, Parts, ridgid, thingiverse, stl,...
8
8.0
Jan 15, 2021
01/21
by
Tom Fish (thingerversetom)
data
eye 8
favorite 0
comment 0
Fits with primer, paint and clearcoat (one layer each) perfectly. Customized version of http://www.thingiverse.com/thing:1246651 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1246651
Topics: thingiverse, stl, Vacuum_Adapter, customized, Bosch, ShopVac, shopvac_coupler, hose_connector,...
1
1.0
Apr 19, 2022
04/22
by
Martin Eckert (Madd0n)
data
eye 1
favorite 0
comment 0
I designed a adapter, to plug 50mm hoses direktly to my Scheppach PN-NTS20. You can buy simple suction hose with an inner diametre of 50mm. Very useful if you permanently connected a NTS20 vacuum cleaner to a cnc milling machine with a cyclone between them.
Topics: Parts, thingiverse, Vacuum_Adapter, hose_adapter, stl
4
4.0
Jan 13, 2021
01/21
by
eric lee (eric13579)
data
eye 4
favorite 0
comment 0
I created an CPAP tube interface inner shell for AgapeIngenium's 40mm NATO adapter found here: https://cdn.thingiverse.com/assets/db/ef/8a/4c/d4/40MM_TO_3M_BAYONET_ADAPTER_OUTER_SHELL_GEN5.stl It saves me time and material from having to print out the 40mm thread portion, which I had already done for testing something else.
Topics: thingiverse, rd40, stl, CPAP_hose_adapter, gasmask_adaptor, 40MM_NATO, Other
7
7.0
Apr 20, 2021
04/21
by
Richard Reigens (LiLRichy)
data
eye 7
favorite 0
comment 0
Made this because I could not find one that was the right size I needed. This fits the small Shopvac hoses about 1.25" diameter and connects attachments from my Bissel bagless house vacuum about 1" diameter. Sizes are not exact because of my printer prints off a little bit so I had to compensate but its only about 1mm or so. It fits my vacuum and attachments nice and tight and got the job done.
Topics: vacuum, thingiverse, stl, bissell, hose_adapter, adaptor, hose_connector, ShopVac, Vacuum_Adapter,...
6
6.0
Jun 21, 2021
06/21
by
Gabi Aharonov (BambaVeCola)
data
eye 6
favorite 0
comment 0
XIAOMI JIMMY JV51 JM52 Flexible Tube Adapder suitable for standart 40mm vacuum tube. first part connects jimmy vacuum cleaner to 40mm tube. second part connects 40mm tube to jimmy accessories. also designed aditional nosel. print of 2 parts takes about 4 hours, 50gram of ABS. printed with ultimaker3 - 100%, 0.2mm layer.
Topics: hose_adapter, Household, Stretch Hose, thingiverse, roidmi, jm52, jv51, JIMMY, stl, Vacuum_Adapter,...
5
5.0
Jan 4, 2021
01/21
by
Paulo Esperon (pauloesperon)
data
eye 5
favorite 0
comment 0
This is a CPAP alarm for those who cant wake up with the alarm that comes on the machines. The components are OTS and the prints have been post processed with bondo, primer and spray paint.
Topics: Other, stl, thingiverse, CPAP, cpap_alarm, CPAP_hose_adapter, CPAP_Mask
4
4.0
Mar 22, 2021
03/21
by
Ulrich Hohns (Pumpentreiber)
data
eye 4
favorite 0
comment 0
This is the 32mm Hose Adapter for the Flowclear Pool Pump.
Topics: stl, hose_adapter, thingiverse, Bestway, Biology
3
3.0
Mar 22, 2021
03/21
by
Nico (eponra)
data
eye 3
favorite 0
comment 0
I didnt found the right design to keep my small expandable garden hose on a wall, so i designed my own. Its printable upright, and is also optimized to do so. The two holders left and right are for the adapter and the actual spray nozzle. Only the V2 version have these two holders, the normal doesnt, if you dont need or want it.
Topics: stl, Gardena, garden_hose, indoor_garden, hose_adapter, gardening, Outdoor & Garden,...
7
7.0
Mar 9, 2021
03/21
by
Adam Widdowson (AdamWiddow)
data
eye 7
favorite 0
comment 0
An older design of mine, this is to go on the end of a small pipe to direct water. I used it on my LEGO TECHNIC Fire Truck model, which used a small (Non Lego) pump to pump real water. Video: https://youtu.be/k29jUfUAZis Main video: https://youtu.be/PH5SjyulIHA I can't remember which version I used in the end, but I've uploaded some images showing the differences. i.e the shape of the connector and the diameter. I've also uploaded an image illustrating the orientation that it was designed to...
Topics: Vehicles, Lego, hose_adapter, Fire_Engine, Fireengine, Model_Truck, stl, thingiverse,...
5
5.0
Mar 10, 2021
03/21
by
F. Behrens (layershifter)
data
eye 5
favorite 0
comment 0
The inexpensive Scheppach workshop vacuum comes with a cheap, sad, thin hose. To use the vacuum's full capacity, a wider hose can do a lot of good. This adapter allows you to put [a serious 60mm hose](https://www.amazon.de/gp/product/B002R6D8OK) to use on your Scheppach ASP-30-*. While we are on it: Another sad detail about the ASP-30 is its dust filtration capability. Check out my [cheap dust cyclone project](https://www.thingiverse.com/thing:3669095) if you want to solve that! :-) Tip: If the...
Topics: adapter, hose_adapter, stl, thingiverse, workshop, shopvac_adapter, hose, Vacuum_Adapter, Parts,...
3
3.0
Mar 25, 2021
03/21
by
Mark Davison (poggler)
data
eye 3
favorite 0
comment 0
My garden tap is an old 5/8" BSP connection. All modern hose adapters in the UK are either 1/2" BSP or 3/4" BSP. There are not many fittings or adapters available. I found one here https://www.amazon.co.uk/Threaded-Outside-Adaptor-Hozelock-Connector/dp/B07H51MNKC but it costs £6 and was going to take a while to arrive... so I made this adapter.
Topics: stl, Outdoor & Garden, hose, garden_hose, hose_adapter, BSP, thingiverse, garden, adapter,...
4
4.0
Mar 5, 2021
03/21
by
Dominic Koroly (TheSeldomSeenKid)
data
eye 4
favorite 0
comment 0
What: Press fit neckdown hose adaptor to be used with a Shopline Jet Dust collector. Dimensions: 90 mm interior for the Jet; 58 mm exterior for the existing hose coupling; 15 mm thick, 2 mm fillets on edges. Why: The hose used to collect dust from the table saw is smaller than the intake to the Shopline Dust Vac. I wanted a simple adaptor that did not add additional length and used a small amount of material to print.
Topics: stl, hose_adapter, shopline, shopline_jet, Parts, dust_collector, thingiverse
7
7.0
Jan 20, 2021
01/21
by
Börni Börni (Boerni)
data
eye 7
favorite 0
comment 0
Customizer for hose adapters. I used it for my intex pool for 32mm to 38mm adapters. Have fun!
Topics: Outdoor & Garden, intex_pool, stl, hose_adapter, thingiverse, garden_hose, intex
5
5.0
Mar 18, 2021
03/21
by
Rob Nelson (N3X15)
data
eye 5
favorite 0
comment 0
This is a simple air quick-connector to 1/4" hose barb adapter I threw together in FreeCAD for my vacuum chamber. The aspirator pump I use to draw a rough vacuum is a bit unwieldy, so I decided to try this kind of connector. There are some adapters out there on Thingiverse already, but they are multiple parts requiring supergluing. I figured I could do better. I did not design this with compressed air in mind, it is only intended to be used for vacuum pressure systems. **THIS WILL PROBABLY...
Topics: Barb, pneumatics, adapter, pneumatic-fitting, stl, pneumatic, quick_release, thingiverse, air, DIY,...
5
5.0
Jun 11, 2021
06/21
by
(Costa_D)
data
eye 5
favorite 0
comment 0
Summary UPDATE 1 NOV DO NOT PRINT! I WILL COME WITH A BETTER 40mm CONNECTION !!!! Reductions from 2", 2 1/2" and 4" to 40 mm New 40 mm hose connection, still tight, however... better!
Topics: connections, Vacuum_Hose_Adapter, thingiverse, vacuum reductions, stl
2
2.0
Apr 20, 2022
04/22
by
HOBBYHIMMEL Die Offene Werkstatt (Hobbyhimmel)
data
eye 2
favorite 0
comment 0
THANKS to Rudi for providing this new adapter! The adapter is designed to fit in the original Scheppach BTS 900 Belt/disc sanding machine This adapter is inserted in the vacuum connector of the machine and ends with the male part of our adapter system. If you are also tired of matching tools with different vacuum outlets to you shop-vacuum and don't like to use tape oder all diferent adapters, this might be the right choice to switch all you setup to one standard open source adapter- the osVAC...
Topics: Parts, hose_connector, BTS900, thingiverse, Scheppach_BTS900, osvac, Vacuum_Hose_Adapter,...
3
3.0
May 1, 2021
05/21
by
Robert Fliege (theMachinista)
data
eye 3
favorite 0
comment 0
This fitting adapts the Makita 192108-A 3/4" vacuum hose to 2 1/2" shop vac fittings. The hose fits Makita power tools such as their sanders and plate joiner, Probably others as well, check their website for details. I've included my .f3d file in case you wish to tweak the size Next step will be to wrap the hose in 1" expandable braid so the ridges won't drag on the edges of boards when I work on them.
Topics: stl, dust_collection, Makita_192108-A, dust_collector, Makita_sander, makita_vacuum,...
4
4.0
May 1, 2021
05/21
by
Scott Richards (makermakerakebaker)
data
eye 4
favorite 0
comment 0
I made this to replace the cheap adapter I bought at the store that barely stayed in. This fits on the outside of my Dewalt Miter Saw 1.5" attachment as well as the outside of my shopvac (2 1/4"). I increased the dimensions a touch to make it fit snug with PETG on my printer. You may wish to scale as needed.
Topics: stl, ShopVac, hose_adapter, Vacuum_Hose, Machine Tools, thingiverse, Miter_saw
2
2.0
May 1, 2021
05/21
by
Renato Bonomini (renatobo)
data
eye 2
favorite 0
comment 0
If you have a midwest gas can with one of those awful "spill-proof" tubes, you have probably spilled way too much gasoline when trying to fill up your bike. Looking at how some track-side fuel jugs work, this adapter is for something like the VP Racing Hose kit at https://vpracingfuels.com/product/hose-deluxe/?c=237 The thread for the fuel hose is 3/4"-14 BPS Pipe thread (the same is used on the cap). **Please note**: fuel and plastic rarely work along well, be very careful of...
Topics: stl, Gas, Automotive, Fuel_tank, fuel, racing, hose_adapter, fuel_cap, adapter, thingiverse
3
3.0
Jul 3, 2021
07/21
by
Ove Loss (OLoss)
data
eye 3
favorite 0
comment 0
This is a male tool sleeve (Werkzeugmuffe) for the Bosch GAS 35/55.
Topics: vacuum adapter, hose connector, Machine Tools, hose adapter, thingiverse, stl
4
4.0
Mar 18, 2021
03/21
by
HOBBYHIMMEL Die Offene Werkstatt (Hobbyhimmel)
data
eye 4
favorite 0
comment 0
This adapter is screwed on a DN32 hose and ends a 50mm round part perfectly matching cyclone in- and outlets. If you are also tired of matching tools with different vacuum outlets to you shop-vacuum and don't like to use tape oder all diferent adapters, this might be the right choice to switch all you setup to one standard open source adapter- the osVAC Adapter! We started with 9 different adapters for different machines, vacuum hoses and cyclone connections and hope there will be more adapter...
Topics: Vacuum_Adapter, Vacuum_Hose_Adapter, Parts, Vacuum_Hose, hose_connector, vacuum, universal_adapter,...
3
3.0
Apr 1, 2021
04/21
by
B (pichart)
data
eye 3
favorite 0
comment 0
pipe knee for kitchen sink drain pipe needed to adapt a common kitchen sink to a drain hose of different diameter e.g. for camping use filter, screw and rubber gasket reused from original Customizable outer output diameter and x-offset
Topics: customizable, drain, openscad, thingiverse, kitchen, knee, pipe, Kitchen & Dining,...
3
3.0
Apr 2, 2021
04/21
by
Henry (Henryhere)
data
eye 3
favorite 0
comment 0
Dust extractor adapter to allow 100mm Inside diameter hose to couple with smaller section hose, in this case, a 32mm outer diameter hose. 32mm hose has a corrugated design. Barbs are incorporated into the adapter, making it necessary to "screw-in" the 32mm hose, these barbs grip the outside diameter of the 32mm hose. The 100mm hose should fit easily onto the adapter due to the 98mm finished size of the adaptor, it may be necessary to clamp or tape the large hose in place depending...
Topics: Dust_extractor, thingiverse, 100mm_hose_adapter, vacuum_hose_adapter, 100mm_hose_adaptor,...
3
3.0
Apr 1, 2021
04/21
by
Ivan Goryaschenko (Goryaschenko)
data
eye 3
favorite 0
comment 0
Vacuum cleaner hose adapter
Topics: Replacement Parts, hose adapter, thingiverse, adapter, Vacuum cleaner, stl
4
4.0
Jan 3, 2021
01/21
by
David Wang (cydwang)
data
eye 4
favorite 0
comment 0
I made this one to replace the original CPAP Resmed Airmini HumidX because air will come out from the small vents and blows into my face or hear the hissing sounds which can be quite annoying.
Topics: Other, stl, Resmed, Cpap, Humidx, thingiverse, Resmed Airmini, CPAP_hose_adapter
3
3.0
Apr 5, 2021
04/21
by
Willie Beckmann (willie42)
data
eye 3
favorite 0
comment 0
My Carado camper van has an waste water outlet that is almost 48 mm wide. In some places there is no drain in the ground, so that you have to use a bucket or a hose. I measured the thread and drew this adapter to connect a hose. I use a small one (so that I don´t have to carry to much with me), 3/4 „ inner Diameter. You will have to wait till it´s empty, but it´s a lot better, than using a bucket. But I added STLs for 1" and 1 1/4" as well. If you just need it to empty your tank,...
Topics: thingiverse, hose, RV_camper, Created_with_FreeCAD, Sport & Outdoors, Wastewater, hose_adapter,...
10
10.0
Apr 22, 2021
04/21
by
(AndrewFromOz)
data
eye 10
favorite 0
comment 0
This is a remix of another hose adaptor (actually sliced up and added to). I needed to connect a standard AU hose (12mm) to a 19mm ID poly gardening pipe. Yes, they are only $4 at the hardware store but that's 25km away. Printed in natural ABS at 50% fill. Just add a rubber 'O' ring in the recess provided.
Topics: thingiverse, stl, hose_adapter, adaptor, garden, poly_pipe, garden_hose, hose, Outdoor & Garden
3
3.0
Apr 8, 2021
04/21
by
Joseph (jsphpl)
data
eye 3
favorite 0
comment 0
Customizable adapter to join two hoses of different diameters
Topics: joint, garden_hose, customizable, pipe, stl, hose, thingiverse, customizer, Outdoor & Garden,...
3
3.0
Apr 24, 2021
04/21
by
Daniel Newell (3DNoodle)
data
eye 3
favorite 0
comment 0
I needed to build a cart for my Ridgid shop-vac, and my Rockler Dust Right Dust Separator that would quiet down the vacuum. I decided on an over under design with the vacuum hidden in the bottom leaving the separator easy to get at for dust removal. I used a simple cabinet design 18"x18" interior dimensions for floor and shelf and constructed the box out of 3/4" plywood (.70"). Thus the need for the parts you see here. The "Nut" and "Through-Hole" Pieces...
Topics: dust_seperator, shopvac_coupler, stl, dust_cover, Flex, Expandable, dust, Vacuum_Adapter,...
3
3.0
Jun 11, 2021
06/21
by
Jason Sexauer (genericlifeform)
data
eye 3
favorite 0
comment 0
This is a replacement lever for a hose shut-off valve. The little lever to actuate the valve seems to break off every season, so I printed this replacement to have to avoid buying a new valve. Improved over the factory design to have fillets to distribute stresses better and hopefully avoid breaking as often. I would print at 50%+ infill with a strong pattern like gyroid. No supports are required as long as you print "upside down" (with the top flat area on the print bed). PETG would...
Topics: hose_adapter, thingiverse, garden_hose, Outdoor & Garden, stl
2
2.0
Jul 23, 2021
07/21
by
hans van lin (hansvanlin)
data
eye 2
favorite 0
comment 0
Miele vacuum hose mount to tool outlet with diameter 30.5mm In my case I designed it to connect the bosch delta sander to a miele vacuumcleaner. Also made a version to connect another vacuum cleaner hose to extend the lenght of the hose.
Topics: bosch, adapter, vacuum hose extender, vacuum hose connector, Miele, vacuum hose mount, stl, hose...
3
3.0
Jul 23, 2021
07/21
by
Steve Williamson (Swilli38)
data
eye 3
favorite 0
comment 0
Designed to connect a 100mm dust extractor outlet with a 58mm hose adaptor for power tool dust collection. Note that the adapter fits inside the 100mm outlet so the O/D of the adapter is between 90 and 93.5mm. The other end can take a 58mm O/D hose that fits inside the adaptor. The photo makes sense! I printed with supports as I think they're needed but you'll notice that I had some issues with my 3D print radius and the print lifted up. I think the room temperature was an issue but the part...
Topics: hose_adapter, 100mm, DIY, stl, dust, hose, thingiverse, Vacuum_Adapter
3
3.0
Jun 11, 2021
06/21
by
Jaime Frias Jr (jaimefriasjr)
data
eye 3
favorite 0
comment 0
This is a 45 elbow for a 4 3/4" Connection. It comes with a female and male connection.
Topics: dust_collector, hose_adapter, thingiverse, elbow, DIY, stl
4
4.0
Mar 15, 2021
03/21
by
(tattooedfish)
data
eye 4
favorite 0
comment 0
I was having a hard time finding what i needed local. I am using a 5 gallon paint bucket picked up from lowes with a lid. I am using Distilled water for cooling the K40 laser cutter and I didnt like the idea of just having the tubing pass through 2 holes in a bucket lid. Drilled 2 holes for the barbs to slide through with a fastened nut on the under side of the lid. For leak proofing the lid I would mayble ad a dab of silicone our use a rubber seal between the nut and the lid. These buckets...
Topics: k40, k40 laser cutting, bulkhead_fitting, tube fitting, water, thingiverse, passthorugh, 3D...
4
4.0
Mar 13, 2021
03/21
by
Vincent Noben (Vinobe93)
data
eye 4
favorite 0
comment 0
Correct model =========== Use the "Gardena_18mm_hose_connector-**tweaked-for-leaking**" model for best result. Remake ====== This is a remake of "Gardena 24mm Hose connector" by Etlaare, **BUT** tweaked because his version leaked at the Gardena endpoint and I needed a smaller diameter on the non-Gardena side. Misc ==== - I first just adjusted the diameter of the model by Etlaare from 25mm to 18mm and printed that. After installing it on a Gardena hose it leaked a lot on the...
Topics: thingiverse, Hose, Gardena adapter, Gardena hose, stl, Outdoor & Garden, Hose adapter, Gardena
3
3.0
Jan 5, 2021
01/21
by
Steve Johnsen (SteveJohnsen)
data
eye 3
favorite 0
comment 0
This is a clamping, pivoting right angle bracket that attaches a 2 1/2" Loc-Line Vacuum Hose Adapter to a 1/2" diameter rod, dowel or shaft. Various power tools have capabilities to attach a 1/2" rod and position it so that with this clamping bracket, a dust collection hose can be positioned to collect sawdust, etc. I use this bracket and Loc-Line 2 1/2" accessories to collect sawdust on from my bench top Ryobi band saw. You will need to purchase or acquire knobs, bolts,...
Topics: Tools, right_angle_bracket, stl, Loc-Line_vac_adapter, hose_adapter, 3-D_printable, thingiverse,...
3
3.0
Jan 5, 2021
01/21
by
Steve Johnsen (SteveJohnsen)
data
eye 3
favorite 0
comment 0
This is a clamping, pivoting bracket that attaches a 2 1/2" Loc-Line Vacuum Hose Adapter to a 1/2" diameter rod, dowel or shaft. Various power tools have capabilities to attach a 1/2" rod and position it so that with this clamping bracket, a dust collection hose can be positioned to collect sawdust, etc. I use this bracket and Loc-Line 2 1/2" accessories to collect sawdust on from my bench top Ryobi combination belt & disc sander. You will need to purchase or acquire...
Topics: Tools, stl, Hose_adapter, 3-D_printable, Loc-Line_Vac._adapter, Pivoting_bracket, thingiverse,...
3
3.0
May 21, 2021
05/21
by
Eivind Aavik (Dr_Eamy)
data
eye 3
favorite 0
comment 0
Hose adapter for a Kärcher vacuum to a 50mm spiral hose.
Topics: dust_collector, Machine Tools, hose, Kä, rcher, thingiverse, hose_adapter, adapter,...
3
3.0
Mar 26, 2021
03/21
by
Bobby Ketree (Awesomesox)
data
eye 3
favorite 0
comment 0
This is a 1/2 hose mender designed to fix hoses. After printing you simply cut off the area that has been sliced/broken and then make sure either side of it is flat and then slide the small cylinder print halfway into one of the hose ends and then the other half into the other hose. Just use some small nuts and bolts to attach the bracket prices that clamp down on the mended area and stop it from disconnection/leaking. This can be scaled up to fit larger hoses or scaled down to fit smaller...
Topics: stl, hoses, hose, garden fixer, thingiverse, hose adapter, garden, broken hose, hose fixer, mender,...
4
4.0
Apr 13, 2021
04/21
by
Brian Mausolf (mausolfb)
data
eye 4
favorite 0
comment 0
This is a T-shaped adapter that allows two vacuum hoses to connect to one vacuum (or possibly two vacuums to one hose). Adapter can be scaled for various sizes.
Topics: thingiverse, dual, two, Shop_Vac, vacuum, hose, double, hose_adapter, hose_connector, stl,...
4
4.0
Jul 22, 2021
07/21
by
sach ann (sachann)
data
eye 4
favorite 0
comment 0
Remixed this for connecting a 32mm poolhose to the waterjet from a Lay-Z-Spa Bali for adding a bestway flowclear solarmat. Works pretty okay as long as the mat lays on the floor. If the solarmat is considerably higher than the original Lay-Z-Spa pump it can not handle the rise anymore. The original diffusor has to be removed to install this. Printed upright with 100% infill which gives more stability although this modell almost only consists of walls. Designed for printing without supports but...
Topics: adapter, hose_adapter, Outdoor & Garden, stl, Bestway, BESTWAY_POOL_ADAPTER, hose, thingiverse,...
3
3.0
Mar 25, 2021
03/21
by
HOBBYHIMMEL Die Offene Werkstatt (Hobbyhimmel)
data
eye 3
favorite 0
comment 0
This adapter is screwed on a plain surface (e.g. fence of a router table) and ends with the MALE part of our adapter system. If you are also tired of matching tools with different vacuum outlets to you shop-vacuum and don't like to use tape oder all diferent adapters, this might be the right choice to switch all you setup to one standard open source adapter- the osVAC Adapter! We started with 9 different adapters for different machines, vacuum hoses and cyclone connections and hope there will...
Topics: stl, Parts, Vacuum_Hose_Adapter, thingiverse
3
3.0
Mar 2, 2021
03/21
by
mohit varikuti (MohitAwsome)
data
eye 3
favorite 0
comment 0
This is a double-sided male garden hose adapter
Topics: adapter, Double sided, thingiverse, stl, Male, Vacuum_Hose, Double sided hose, garden_hose,...
4
4.0
Mar 15, 2021
03/21
by
Berni Kleiner (Blargedy)
data
eye 4
favorite 0
comment 0
This is a replacement part to fit the Respironics WISP Nasal Mask onto a Philips Dreamstation CPAP machine. This part normally comes with the Mask but I accidentally threw it out when replacing the cushion.
Topics: stl, CPAP_hose_adapter, thingiverse, Replacement Parts
3
3.0
Apr 28, 2021
04/21
by
Herouin Fabien (Trankilnet)
data
eye 3
favorite 0
comment 0
English: Adapter for garden hose to 4mm hose. Drill a 4mm hole and forcefully insert it into the garden hose. Pay attention to the direction of insertion. Can be used with this: https://www.thingiverse.com/thing:4496479 French: Adaptateur pour tuyau d'arrosage vers tuyau 4mm. Percer un trou de 4mm et insérer en force dans le tuyau d'arrosage. Attention au sens d'insertion. Peut être utilisé avec ce système: https://www.thingiverse.com/thing:4496479
Topics: tuyau, Arrosage_automatique, thingiverse, arrosage, hose_adapter, garden_hose, jardinage, Gardena,...
3
3.0
Mar 21, 2021
03/21
by
ry og (ry4n0)
data
eye 3
favorite 0
comment 0
The sun is out and my wife wanted to lay out in the garden on an inflatable chair, the chair however was not fully inflated and I had no way to top it up since the hose and pump were being used elsewhere. But wait..... I have tinkercad + a 3d printer + workshop pump = idea! I quickly knocked up a very simple design and printed it. Now for more maths.... Inflated chair + Wife = Happy Life! This design is not meant to set the world alight or break any design world records. What it is, is my way...
Topics: stl, air, adapter, hose_adapter, Outdoor & Garden, thingiverse, air hose
3
3.0
Apr 13, 2021
04/21
by
Nico Seeleib (Kinetik1703)
data
eye 3
favorite 0
comment 0
I needed an adapter to connect my Scheppach BTS900 to my shop vacuum system. This hose adapter is able to connect to a 50 mm ID tube directly.
Topics: thingiverse, Scheppach_Vacuum_clip, Vacuum_Hose, hose, nilfisk, hose_adapter, scheppach,...
