2
2.0
Aug 9, 2021
08/21
by
(dmc53)
data
eye 2
favorite 0
comment 0
Designed rubber feet for my IKEA Lack table which I have my 3D Printer on to help reduce noise and vibrations, and improve grip to hard floors. Designed for flexible filament.
Topics: ikea_lack_table, lack, thingiverse, lack_enclosure, lack_table, Tools, ikea, IKEA_Lack_enclosure,...
3
3.0
Jan 3, 2021
01/21
by
Ryder Sadlovsky (stringlapse)
data
eye 3
favorite 0
comment 0
I wanted to use Cyberlamb's Lack stacker but I already assembled my tables, so I cut it down into this shorter version. I kept a lip on the bottom to keep the upper leg from moving inward but it is still free to move out. Having weight on the top table helps make up for the fact that this doesn't go around the leg screw of the bottom table to lock it in place.
Topics: 3D Printer Accessories, stl, lack, lack_enclosure, Lack_stack, thingiverse, IKEA_Lack_enclosure,...
7
7.0
Apr 18, 2021
04/21
by
Matthew Kidd (MattKi)
data
eye 7
favorite 0
comment 0
This is a customisable model for use with tables that can be stacked and whose legs are square and screwed in to the table body. For the purpose of demonstrating a possible use the dimensions are set up for use with LACK tables as is the sample STL. Please note that I have not printed this to verify the dimensions used. I would recommend that you take some measurements yourself before attempting a print of this design. Turn off the easy print mode if you want a version that is designed to be...
Topics: lack, lack_stacker, thingiverse, stl, Household, ikea_lack
3
3.0
Oct 15, 2021
10/21
by
Edmund Chan III (edmundchaniii)
data
eye 3
favorite 0
comment 0
Hi, I hope you like this! This is a Leg Extension for Lack Table Legs. These are made to fit in with the original Prusa Enclosure, so it has the same chamfers. I have included a 50mm, 75mm and 100mm version + I have included a STEP file that can be easily extended. So, you can either stack and screw together multiple ones of the existing extensions to get the height you want or you can modify the STEP file to get the exact length you want. If you use this to extend the enclosure, don't forget,...
Topics: thingiverse, Lack Enclosure, stl, 3D Printer Accessories, Prusa Lack Enclosure, Lack Table...
3
3.0
Mar 19, 2021
03/21
by
Sean Auffinger (seanauff)
data
eye 3
favorite 0
comment 0
I liked the design from Phydam, but I wanted something that didn't require mechanical attachment to the Lack. This remix allows the Lack to sit on the leveling feet. I also used a coarser thread (M33x3) for good results printing at 0.2 mm layer height. Updates: 2020-01-30: Added foot model that is optimized for TPU. Made overhangs less steep and chamfered inner bottom edge to make it a little more squishy. Backwards compatible with existing extension.
Topics: leveling, lack, lack_enclosure, Household, ikea, lack_rack, thingiverse, ikea_lack_table,...
0
0.0
Aug 15, 2022
08/22
by
That Guy (The__Captain)
data
eye 0
favorite 0
comment 0
Added an edge so that this can be printed with no support. Might want to add a brim.
Topics: ikea_lack, Decor, stl, lack, thingiverse, lack_table, extension
3
3.0
Jul 3, 2021
07/21
by
Sharon Solomon (ssssssl)
data
eye 3
favorite 0
comment 0
The design is exactly the same as nnorton00's Slack Lack. I simply assembled the parts in Fusion so I could visualize how it works. Hopefully it will help someone else!
Topics: Slack_Lack, lack, 3D Printing, ikea_lack, thingiverse, stl
6
6.0
Mar 17, 2021
03/21
by
Hein Andre Grønnestad (heinandre)
data
eye 6
favorite 0
comment 0
This is my attempt to improve the filament guide on my Lack-enclosure. I used to have a straight guide through the top table as shown on the pictures. But that wasn't very ideal because the filament got bent way to much. So I just decided to make a slit in my table and print two inserts that fit together in the hole. Glue the top and bottom insert to the Lack-table. https://www.instagram.com/p/BorIGazgrCO/
Topics: 3D Printer Accessories, ikea_lack, stl, thingiverse, lack, enclosure, lack_enclosure,...
3
3.0
Jan 7, 2021
01/21
by
John Henderson (jwestonh)
data
eye 3
favorite 0
comment 0
Bracket_03
Topics: Other, stl, lack, thingiverse, ikea_lack
4
4.0
Jan 7, 2021
01/21
by
John Henderson (jwestonh)
data
eye 4
favorite 0
comment 0
Just my design of a Insta360 Go camera mount for the Diatone TinaWhoop. Super Simple.
Topics: Other, stl, lack, thingiverse, ikea_lack
3
3.0
Jun 7, 2021
06/21
by
Trent Swanson (Bigcec1)
data
eye 3
favorite 0
comment 0
75mm lack table extension foot
Topics: ikea_lack, lack, thingiverse, stl, Household
3
3.0
Jan 7, 2021
01/21
by
John Henderson (jwestonh)
data
eye 3
favorite 0
comment 0
Bracket_04
Topics: Other, stl, lack, thingiverse, ikea_lack
2
2.0
Aug 8, 2021
08/21
by
(dmc53)
data
eye 2
favorite 0
comment 0
Version 2 of my IKEA Lack Table rubber foot, larger and no screw hole to aid vibration reduction. Will update once printed and tested.
Topics: ikea_lack_table, enclosure, lack, thingiverse, lack_table, Tools, ikea, 3d_printer_enclosure,...
6
6.0
Jan 21, 2021
01/21
by
Michal Altair Valasek (ridercz)
data
eye 6
favorite 0
comment 0
I love the LACK Attack series of mods. But they deal only with growing the lack stack in the Z axis. For my project I use double-wide setup, so I designed new type of joint, which can join two LACKs side by side. The design is inspired by the original [LACK Attack #1](https://www.thingiverse.com/thing:2586887) adapters and is intended to be used with them. * `LackJoint_A.stl` is intended to be used on top of the LACKs (to prevent the tables from coming apart) or at the bottom of the entire...
Topics: ikea_lack, lack, thingiverse, DIY, stl
2
2.0
Nov 8, 2021
11/21
by
Sebastien B. (sebxx)
data
eye 2
favorite 0
comment 0
A more compact remix of the original Ikea Lack Table Screwless Stacker, which will take 4 time less to print.
Topics: stl, Other, lack, ikea_lack, thingiverse
3
3.0
Jan 7, 2021
01/21
by
John Henderson (jwestonh)
data
eye 3
favorite 0
comment 0
Bracket_02
Topics: Other, stl, lack, thingiverse, ikea_lack
3
3.0
Oct 15, 2021
10/21
by
Grant Williams (grantw99)
data
eye 3
favorite 0
comment 0
This is my take on the Ikea Lack enclosure for an Ender 3. Right now all I have is these foot brackets to stack one Lack on top of another. The cool/unique part about my design is that it requires no screws/epoxy. It's a friction fit using the weight of the printer to hold the table down and the geometry of one on each corner to prevent the table from sliding off. Hope you enjoy!
Topics: IKEA_Lack_enclosure, thingiverse, ikea, stl, DIY, ikea_lack, lack
3
3.0
Jan 7, 2021
01/21
by
John Henderson (jwestonh)
data
eye 3
favorite 0
comment 0
Bracket_06
Topics: Other, stl, lack, thingiverse, ikea_lack
3
3.0
Jan 7, 2021
01/21
by
John Henderson (jwestonh)
data
eye 3
favorite 0
comment 0
Bracket_05
Topics: Other, stl, lack, thingiverse, ikea_lack
12
12
Jan 11, 2021
01/21
by
Chad Rice (Bolerro)
data
eye 12
favorite 0
comment 0
These are the printable parts I have created to make an Ikea Lack Table enclosure. I will slowly be adding different creations to this Thing over time as I complete my enclosure. I will try to only post those items I have printed myself and know works. If I haven't been able to test it, I will note it for the specific creation. Hope this helps others with making enclosures to protect there printers and help improve there prints. **Update (11/22/2017):** I have more items coming soon to...
Topics: thingiverse, stl, 3D Printer Accessories, Lack Table, ikea lack, lack, enclosure
3
3.0
Jan 7, 2021
01/21
by
Tom T (Centurytt)
data
eye 3
favorite 0
comment 0
Hi Guys, just simple, if you want to cut your legs from IKEA Lack Table, keep an eye on that the leg is hollow. So you will need this to keep the leg in place with some screws. Cheers
Topics: Other, Ikea_Lack_leg_stacker, ikea_lack_table, stl, Ikea, thingiverse, ikea_lack_leg,...
3
3.0
May 1, 2021
05/21
by
Clément Coste (clemcoste30)
data
eye 3
favorite 0
comment 0
IKEA LACK model extended feet This model ables to add 7cm to the feet, can be customized as desire I used a 5% fulfill with zig zag pattern
Topics: stl, ikea, Household, lack, ikea_lack, thingiverse
3
3.0
Mar 25, 2021
03/21
by
Niya Kouya (NiyaShy)
data
eye 3
favorite 0
comment 0
Remix of the Prusa LACK enclosure with differing wall thicknesses. Reason for that is pretty simple, my local hardware store didn't sell any (affordable) 3mm acrylics, only 2 and 4mm. So I opted for 2mm acrylics for the sides, 4mm for the doors and 3mm MDF for the back (to make it easier to cut holes for a dust filter and 2 fans). The height of the top parts was extended by 5 cm to get enough room for an Anycubic i3 Mega-S. I also opted for not using the original bottom piece with a cable hole...
Topics: stl, lack_enclosure, thingiverse, IKEA_Enclosure, ikea_lack, IKEA_Lack_enclosure, lack, enclosure,...
9
9.0
Jan 17, 2021
01/21
by
Jonathan King (jrk190)
data
eye 9
favorite 0
comment 0
Made Leg extensions for Salzig's screwless stackers found in the link below. https://www.thingiverse.com/thing:2188016
Topics: ikea_lack, 3D Printer Parts, Lack, thingiverse, Lack Extension parts, stl
3
3.0
Mar 19, 2021
03/21
by
Dan Royer (i-make-robots)
data
eye 3
favorite 0
comment 0
Needed to raise an IKEA LACK table 1.2". so this food does the job. Printed without support at 10% infill.
Topics: lack, Decor, ikea, thingiverse, ikea_lack_table, foot, ikea_lack, stl
3
3.0
Mar 26, 2021
03/21
by
Justin Ware (injust)
data
eye 3
favorite 0
comment 0
I know there are already a hundred of these on Thingiverse... But when I had the need of a bracket to stack IKEA Lack Tables on top of each other, I was dissatisfied with the options I found, even those that had the same goal (be minimal and require no fasteners). They mostly had one or more of these problems: -- Use too much material -- Require supports to print -- Don't account for the slight inset of the legs relative to the table surface This will print quickly with no supports (upside...
Topics: stl, thingiverse, ikea_lack_table, ikea_lack, Ikea_Lack_Bracket, Organization
3
3.0
Jun 6, 2021
06/21
by
Alon Ganon (ChiefGyk)
data
eye 3
favorite 0
comment 0
I like the "LACK Stack" as I call it but the feet always are told to be screwed in and caused the plastic to fold up underneath, so I wanted to make a proper hole to screw through, as well as waste less plastic. I have since added the one for the wire, as well as the ones for the hinged door.
Topics: lack feet with screw, screwhole, ikea lack feet, lack, thingiverse, lack feet, stl, 3D Printer...
3
3.0
Jan 4, 2021
01/21
by
Boas Lingeman (Boaslingeman)
data
eye 3
favorite 0
comment 0
My original prusa enclosure top corner broke (as you can see on the last picture). So I designed this corner support to make the legs more stable.
Topics: stl, lack, thingiverse, ikea_lack, enclosure, DIY
8
8.0
Jan 17, 2021
01/21
by
Shafiqur Khan (shfqrkhn)
data
eye 8
favorite 0
comment 0
This part lets you extend the legs of IKEA Lack tables while letting you use the included threaded screws. Note the orientation of the parts. FDM prints usually break along the layer, hence it is recommended to orient them as pictured. I bought two used Lack Coffee Tables (90x55x45cm) as well as a Lack Side Table (55x55x45). The idea is to cannibalize the side table and use the legs to lift up one of the coffee tables. This is an ongoing project, but here is my plan: 1. Drill a smaller guide...
Topics: ikea_lack, lack, thingiverse, Office, ikea, stl
4
4.0
Apr 27, 2021
04/21
by
Jelger Kingma (J3lg3r)
data
eye 4
favorite 0
comment 0
To stack two LACK tables. Made one with and one without holes for a screw.
Topics: thingiverse, ikea_lack, ikea, stl, lack, Parts
3
3.0
Mar 24, 2021
03/21
by
Maciej Medyński (medykus)
data
eye 3
favorite 0
comment 0
Simple feet holder for stacking Lack tables.
Topics: stl, thingiverse, ikea_lack, lack, Organization, ikea
6
6.0
Mar 16, 2021
03/21
by
Joshua Jones (vertigo235)
data
eye 6
favorite 0
comment 0
To mount your lack to the wall! Spaces it off the wall to accommodate for baseboards. Will need some M4 square nuts (thin kind). I know, sorry! Fusion Project: https://a360.co/2Oqm3C9
Topics: 3D Printing, ikea_lack, stl, thingiverse, lack
4
4.0
May 1, 2021
05/21
by
K. Hampf (khampf)
data
eye 4
favorite 0
comment 0
I use IKEA Lack tables not as an enclosure but more of a shelf by having put a table on top of another upside-down table. This without using any screws, I join the legs using simple connectors (I could not find the exact design I have been using but there are plenty on ThingiVerse). I decided I want to hang stuff and since I use the [MultiClip system](https://www.thingiverse.com/thing:2747516) I made new joiners and other parts compatible with the legs of the IKEA Lack series.
Topics: stl, lack, Organization, ikea_lack, thingiverse, multiclip
4
4.0
Mar 5, 2021
03/21
by
Sinan Gün (Sinan712)
data
eye 4
favorite 0
comment 0
Remixed it because i wanted to mount Rolls under the Table Hole pattern is customized for IKEA RILL 966.713.00 Bottom extended to 12mm height for more Strenght
Topics: stl, ikea_lack_table, Household, ikea, table_leg, lack, ikea_lack, thingiverse
3
3.0
Jun 6, 2021
06/21
by
Kirill v\V (Zmei_gorini4)
data
eye 3
favorite 0
comment 0
Ikea lack tables stack holder
Topics: ikea_lack, lack, thingiverse, stl, 3D Printing
7
7.0
Mar 2, 2021
03/21
by
Grant Kieser (Grantisimo)
data
eye 7
favorite 0
comment 0
I liked the original design, but wanted something slightly more compact. I removed the stress reliefs in the middle, and cut the height down, to speed up the printing time. The holes are for #6 wood screws.
Topics: thingiverse, stl, ikea_lack, table, Office, lack
2
2.0
Jan 18, 2022
01/22
by
John Tetreault (MyTechGuyRI)
data
eye 2
favorite 0
comment 0
I'm using an Ikea Lack table for my Ender 5 printer stand, and I found over time I was building up a lot of debris from purge lines, failed prints, etc. at the bottom of the printer frame, so I decided to design this waste bin that will attach to the side of the Ikea Lack table. I wanted it large enough to hold a substantial amount of plastic scraps and waste, and I wanted it to be easily removable for dumping. This is made with a friction fit, and should clip nicely on the side of the table. I...
Topics: lack, ikea_lack, thingiverse, Organization, stl, ikea
11
11
Jan 10, 2021
01/21
by
Rick V - CryptoCloaks (RickV3D)
data
eye 11
favorite 0
comment 0
**Current Version 2.1 - 9/21/2017** *All screw holes are for #8's* I have seen a lot of different spool holders out there and none of them have been able to give me exactly what I'm looking for. Below is a list of things I'm trying to achieve with this build. ** Latest Changes - 11/20/2017** - Uploaded a new picture showing this mount also works on other enclosures besides just Lack Tables! :) - Fixed Bearing Bracket 1 to remove gap in print that was found by paparazzi. **Objectives:** -...
Topics: lack_spool_holder, thingiverse, stl, lack_spool, 3D Printer Accessories, holder, lack_spool_roller,...
5
5.0
Mar 4, 2021
03/21
by
Chris Oehlers (coehlers)
data
eye 5
favorite 0
comment 0
I needed a place to put my calipers so I decided to make something that wouldn't require any gluing or screwing to mount. I came up with this... https://www.thingiverse.com/thing:3457787 I was looking at it on my enclosure and thought, "I have more than one set of calipers, and it would be nice to have both of them handy." So, i made this. just like the single caliper version there is no glue or screws required. However, if you want to screw this to the legs I made two chamfered holes...
Topics: lack table, stl, 3D Printer Accessories, calipers, lack enclosure, caliper holder, ikea, lack, lack...
2
2.0
Jan 4, 2021
01/21
by
Boas Lingeman (Boaslingeman)
data
eye 2
favorite 0
comment 0
I designed this because I'm making an enclosure for my ender 5. The ender 5 was too high for the original prusa enclosure, so I made the legs longer with this piece.
Topics: stl, lack, thingiverse, ikea_lack, enclosure, DIY
3
3.0
Jan 8, 2021
01/21
by
Fred B (polarbe4r)
data
eye 3
favorite 0
comment 0
Made this for 4.6MM thick whatever the heck you want to use. ENJOY.
Topics: Organization, stl, lack, thingiverse, ikea_lack, enclosure
3
3.0
Jan 11, 2021
01/21
by
Caroline Dunn (carolinedunn)
data
eye 3
favorite 0
comment 0
Loved the Ikea Lack Risers - https://www.thingiverse.com/thing:4441005 I needed risers about 2 cm taller than the original. This riser raises your Ikea LACK end table by about 6 cm total. 20% infill no supports
Topics: thingiverse, stl, Office, ikea_lack, lack riser
0
0.0
Aug 14, 2022
08/22
by
Jeff Shaw (idealgrain)
data
eye 0
favorite 0
comment 0
MTBLS or the Modular Table Building Lack System is an improvement on other brackets and adapters for Ikea Lack stiffening and building. They can print twice as fast, use less than 1/2 the fasteners of other designs, offer more assembly possibilities, are near solid where it matters with appropriate nozzles and wall counts, and the screw holes make alignment with the strongest parts of the Lack tables and Lagkapten tabletops easy. Ikea butcher block tops could also be affixed. Use this system to...
Topics: modular, furniture, ikea, ikea_lack, enclosure, stl, lack, thingiverse, DIY, lack rack
3
3.0
Jan 6, 2021
01/21
by
Florent Vasseur (florentfr62)
data
eye 3
favorite 0
comment 0
J'avais besoin de relier plusieurs tables ensemble horizontalement et verticalement. J'ai donc remixer le support existant pour une table J'en ai mis deux côte à côte pour qu'ils soient imprimer en une seule fois.
Topics: stl, lack, thingiverse, ikea, ikea_lack, DIY
5
5.0
Jan 16, 2021
01/21
by
john FINNIE (F16NNE)
data
eye 5
favorite 0
comment 0
Lack USB Web Cam Holder holder (Space 18mm x 42mm)
Topics: ikea_lack, lack, thingiverse, 3D Printing, stl
7
7.0
Jun 10, 2021
06/21
by
Marius van Witzenburg (mariusvw)
data
eye 7
favorite 0
comment 0
Wanted to keep my table tight against the wall, printed two of these to screw it to the table and the wall.
Topics: ikea_lack, thingiverse, 3D Printer Accessories, lack, stl
6
6.0
May 1, 2021
05/21
by
Ré Schopmeijer (DutchAndDangerous)
data
eye 6
favorite 0
comment 0
I found these Paver Braces (https://www.thingiverse.com/thing:3240687) but after printing them out I found out they screw into the hollow part of the leg, basically rendering them moot So I whipped these up in solidworks. Print with 10 perimeters for strength, paint support enforcers on the 45 degree overhangs of the vertical ribs and the bottoms of the two horizontal ribs in the corners, paint support blockers in the screw holes
Topics: stl, IKEA_Lack_enclosure, lack_enclosure, 3D Printer Accessories, ikea_lack, thingiverse, paver
3
3.0
Jan 7, 2021
01/21
by
John Henderson (jwestonh)
data
eye 3
favorite 0
comment 0
Inside corner bracket for IKEA LACK table. 3D modeled in Fusion360.
Topics: stl, lack, thingiverse, ikea_lack, 3D Printer Accessories
8
8.0
Mar 25, 2021
03/21
by
Wojciech Sciesinski (wojteksci)
data
eye 8
favorite 0
comment 0
Set of pads and a snap that allows you stack IKEA Lack tables one at the other without drilling anything. To mount that you can use hot water and/or a hair drier. Those things were made with Tinkercad. Edit them online - https://www.tinkercad.com/things/87iWRFBZ35b - https://www.tinkercad.com/things/5M7bUSOlLCN
Topics: stl, thingiverse, ikea_lack, stack, lack, 3D Printing
10
10.0
Jan 11, 2021
01/21
by
Necro Nemesis (Superflex_Plastic_Fantastic)
data
eye 10
favorite 0
comment 0
Pieces to join 2 lack tables into a cabinet. Where applicable use #6 countersink wood screws to secure the bracket and leg in place. 2 Leg screws are optional if you wish to leave them out for occasionally completely removing the enclosure. The legs are a snug fit into the brackets. Screws are in locations that are not clearly visible from the exterior of the cabinet or located under the leg itself. The brackets incorporates a glass stop intended to work with these hinges and my other pivot...
Topics: thingiverse, stl, 3D Printer Accessories, ikea_lack, lack
