7
7.0
Apr 20, 2021
04/21
by
Rich Morrow (rmorrow50)
data
eye 7
favorite 0
comment 0
This is technically a remix from a ecig mod case but not much other than the basic shape is original it is heavily modified to be used as a laser holder. I wanted to make some DIY lasers portable just for fun, I had purchased some different size and color lasers so there is 3 sizes 10mm, 12mm, and 14mm tops, I used standard 18650 batteries with a micro USB charger Part # TP4056 and Pololu Adjustable Step-Up/Step-Down Voltage Regulator S7V8A that I was able to fit right on the back of the laser...
Topics: thingiverse, Laser Case, Laser DIY, stl, 10mm Laser, 12mm Laser, Laser Mod, Laser, DIY, 14mm Laser,...
9
9.0
Jan 17, 2021
01/21
by
Josh Campbell (thingengineer)
data
eye 9
favorite 0
comment 0
Laser XY Scanner ==================== Low Cost DIY 3D Printed stepper motor Laser XY Scanner - Draw, Cut, Engrave, or Scan Laser XY Scanner is an open source stepper motor based scanner. The components used are low cost and very accessible. This type of laser scanner is not extremely fast but it can still be used in a variety of applications. Draw, cut and or point with laser X and Y control. The circuit: ------------- * Arduino Nano * Monitors small lever switches for X and Y home detection...
Topics: scanner, laser_cutter, stl, laser_art, laser_scan, thingiverse, xy scanner, laser xy, laser,...
A small photochemical dissociation gas laser oscillator has been constructed for use in the study of laser characteristics, energy extraction techniques, and plasma production. It operates with a mixture of perfluorinated-propyliodide and argon as an active medium.
Topics: Physics, photodissociation laser, gas laser, iodine laser, chemical laser
3
3.0
Jun 11, 2021
06/21
by
Rob Stu (RobbS)
data
eye 3
favorite 0
comment 0
Jigs for a fiber laser.
Topics: Laser_engraver, Laser_engraving, Laser_cut, stl, thingiverse, fiber_laser, Hobby, Laser,...
4
4.0
Apr 1, 2021
04/21
by
Mr. DIY3DTech Dot Com (DIY3DTech)
data
eye 4
favorite 0
comment 0
This is newer version we created to fit a 4 inch (see more here: https://amzn.to/2vHCXUf ) dryer vent hose for the 1 HP fun house blower (see more here: https://amzn.to/36Rwin7 ) we use to evacuate fumes from the eBay/k40 CO2 Laser (see more here: http://diy3dtech.com/purchase-laser/ ) we use in the shop. This is a two piece print to make it easier and has a snap fit (you can add glue if you want but don't need to). We have also included the Fusion file so you can make changes if you need for...
Topics: thingiverse, laser_cutter, Parts, laser_cut, laser, CO2, co2_laser, laser_engraver, laser_co2, stl,...
8
8.0
Jan 17, 2021
01/21
by
Sun rak Kim (Rafaworld)
data
eye 8
favorite 0
comment 0
Inspired by Michael Paley's Laser guide : https://youtu.be/O6TkGypP3Dc Although I design this laser guide for tablesaw or drill press, you can use this laser guide for any purpose. This guide is simple and easy to operate. The switch is stainless toggle and battery is 18650. Also I install the battery charging system inside the device. Please see the video below 1) Tablesaw laser : https://youtu.be/0NPZwPf2RGk 2) Drill press laser : - 1 cross laser : https://youtu.be/QFuPA0Y-AUQ - 2 line laser...
Topics: cross laser, DIY, thingiverse, line laser, Laser guide, drill press laser, laser module, tablesaw...
9
9.0
Apr 24, 2021
04/21
by
Mr. DIY3DTech Dot Com (DIY3DTech)
data
eye 9
favorite 0
comment 0
This is a remix of a 50Watt for the 40 Watt K40 eBay Chinese CO2 Laser version. If you decide to do this be forward it is at your own risk as the laser tube operates at high voltages and can deadly if you do not know what your doing! Also be sure to visit our new Open-SCAD site and channel at http://OpenSCAD.DIY3DTech.com We have also created a video series on this project too and episodes can be seen on YouTube by going to https://youtu.be/RgE0VAuYzoE for episode one and...
Topics: 40_watt, laser_co2, lasercut, stl, lasercutter, k40, CNC_Laser, laser_cut, K40_Laser_L,...
8
8.0
Apr 8, 2021
04/21
by
Victoria Brown (masterURlaser)
data
eye 8
favorite 0
comment 0
When I found out a dear friend was pregnant I knew I had to make something special on the laser for their nursery. This nursery sign can be made from a variety of materials, including wood, paper, plastic, or fabric... Each could be displayed in a unique way. I envision a paper or fabric version framed. For the wood and plastic version you could simply hang it with decorative ribbon, holes already in file. Once the baby is born we will put one of the newborn (or family) pictures behind the cut...
Topics: laser-cut, laser, Decor, laser_cutting, laser-engraving, laser_cut, stl, thingiverse, laser_cutter,...
A five-watt CO₂-N₂-He laser was designed and constructed. The lasing mechanism of the CO₂-N₂-He gas mixture is reviewed. Beam characteristics and power output as a function of gas mixture parameters are presented.
Topics: laser, gas laser, CO2 laser, CO2-N2-HE laser
11
11
Apr 21, 2021
04/21
by
Mr. DIY3DTech Dot Com (DIY3DTech)
data
eye 11
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/e3XFJVVCKbe as this is a re-mix of another dual head laser aiming model to single head version. In addition, have changed the diameter of the ball center from 12mm to both 9mm and 3mm for smaller lasers so simply delete the one (i.e. ball) which you don't need. Also in the image we are using a small 3mm dot laser and driver pressed into the ball with the end covered by heat shrink tape. Also feel free to visit...
Topics: laser-cut, thingiverse, laser_cut, laser_engraver, CNC_Laser, stl, laser_cutter, laser_cutting,...
4
4.0
Mar 9, 2021
03/21
by
mark burton (kryts)
data
eye 4
favorite 0
comment 0
This is a starting point for mounts for my new Endurance 10 watt laser.
Topics: laser cutter, stl, thingiverse, endurance, laser_engraver, endurance_laser, Other, laser mount,...
10
10.0
Apr 21, 2021
04/21
by
Mr. DIY3DTech Dot Com (DIY3DTech)
data
eye 10
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/ekkPsqcraim This is a shim and nut holder (25mm in dia, 6mm tall with a 3mm recess). While these can be used for many things, I designed these stand-offs for a K40 / eBay Chinese CO2 Laser Cutter & Engraver bed replacement. For more information and other projects don't forget to check out http://www.DIY3DTech.com for more laser cutting, 3D Printing and CNC projects! If you are looking for other K40/eBay CO2...
Topics: laser-cut, thingiverse, laser_cut, CNC_Laser, lasercutting, CO2, CO2_Laser_Cutter, lasercutter,...
3
3.0
Apr 27, 2021
04/21
by
Mr. DIY3DTech Dot Com (DIY3DTech)
data
eye 3
favorite 0
comment 0
I have had eBay 440 40 watt CO2 laser for sometime now and the other day the square test fire stuck and would not release! This was not a good thing as I had to hit the power switch quickly, however what was harder is I didn't have a square button to replace but had a dozen or so standard round ones so what to do as round peg doesn't fit a square hole or the saying goes. So I turned to Fusion 360 and designed an adapter! The part snaps into the top and the round bottom piece retains the two...
Topics: thingiverse, CO2_Laser_Cutter, Machine Tools, stl, laser_K40, k40, laser, laser_co2, K40_Laser,...
4
4.0
Jan 4, 2021
01/21
by
Mr. DIY3DTech Dot Com (DIY3DTech)
data
eye 4
favorite 0
comment 0
These are mounting brackets we designed to attach a 12 volt (DC) pump to our eBay K40 CO2 Laser (see more here: http://diy3dtech.com/purchase-laser/ ) as I felt uncomfortable droping a Chinese pump with 120 volts in a bucket of water. So this seems to make more sense as it moves 1.8 liters per/min and planing to use power from the laser from itself to drive the pump. There are a couple versions: 1. http://diy3dtech.com/co2_laser_water_pump_w-power-supply as this version comes with its own...
Topics: stl, laser_co2, k40, CO2_Laser_Cutter, co2_laser, ebay laser, K40_Laser, thingiverse, DIY,...
Journal of Research of the National Bureau of Standards
Topics: Calorimetry, laser, laser calorimetry, laser energy measurement, laser power measurement
10
10.0
Oct 6, 2020
10/20
by
Moenke-Blankenburg, Lieselotte
texts
eye 10
favorite 0
comment 0
xvi, 288 pages : 24 cm
Topics: Laser spectroscopy, Spectroscopie laser
10
10.0
Apr 21, 2021
04/21
by
Mr. DIY3DTech Dot Com (DIY3DTech)
data
eye 10
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online: https://www.tinkercad.com/things/47Sv9xys7Nu These are two mirror alignment jigs which I designed from versions I have seen floating around the Internet. Have also included a PDF of the targets to cut out and use for aligning. Also be sure to use all safety gear and uses is at your own risk. If you are looking for other K40/eBay CO2 laser parts, we have assembled these lists: **Honey Comb Beds:**...
Topics: laser-cut, thingiverse, laser_cut, CNC_Laser, K40_Laser_L, 40 watt laser, lasercutting, CO2,...
9
9.0
Apr 27, 2021
04/21
by
Viktor V (BlueDeath)
data
eye 9
favorite 0
comment 0
A simple laser mount for the K40 laser cutter. You need a line and a dot laser for this, plus power them. For that I recommend using this: http://www.thingiverse.com/thing:993505. I used the laser dot mount from this design: http://www.thingiverse.com/thing:558587
Topics: thingiverse, laser_pointer, laser_cutter, line_laser, K40_Laser, DIY, Aim, stl, alignment, laser
10
10.0
Mar 21, 2021
03/21
by
Scott Lichtsinn (kb0nly)
data
eye 10
favorite 0
comment 0
On the newer K3020 clone of these 40w laser's the back wall is farther forward and the X-End bracket will hit it before the homing switch is reached, also at the head the cable chain will come into contact with the back wall as well so i had to push the cable chain farther forward and shortened and modified the X-End bracket as well as the carriage mounting bracket. The laser holder is made to fit a 12mmx30mm laser module, i used one with a cross pattern lense and after printing the laser...
Topics: stl, DC40 laser, laser cutter, co2 laser, chinese laser, K40 laser, Machine Tools, thingiverse
10
10.0
Mar 12, 2021
03/21
by
mark manos (manos1984)
data
eye 10
favorite 0
comment 0
This is a remix of 60W CO2 Laser cutter tube extension for SH-G350 machine by bratan for use with 5mm acrylic that i sourced from lowes as original is designed for use with .25" material. Used to cover upgraded 1250mm tube in my chinese 50w laser.
Topics: laser, thingiverse, laser_engraver, laser_cutter, laser_tube, stl, Other
3
3.0
Apr 8, 2021
04/21
by
Elson Jesus (abysslabs)
data
eye 3
favorite 0
comment 0
I made this model because I did not find a simple and good solotion that fullfill my needs. The model fits on the head laser with 25-27mm and can be screwed to fix. The laser pointer can adjust by rotating to better match same target as CO2 laser burn place. Tha laser pointer cannot be larger then 13mm
Topics: laser, k40, laser_engraver, stl, Other, K40_Laser, thingiverse, laser_cutter, Chinese_laser,...
10
10.0
Jun 12, 2021
06/21
by
(OBUQ)
data
eye 10
favorite 0
comment 0
Summary Designed this useless gadget while studying ways of movement for the puzzles. After playing with it for a while to see how it moved, it started to be kind of enjoying xD The movement is better with a cleaner and less burned cut. Designed for 3mm in MDF. Kerf compensation for a 150w glass tube laser. Enjoy! Give OBUQ a like on fb: www.fb.com/obuq.design
Topics: laser_cutting, laser, lasercutter, anti-stress, thingiverse, laser-cut, lasercut, stress,...
3
3.0
Jan 6, 2021
01/21
by
ElSomero Blanko (ElSomero)
data
eye 3
favorite 0
comment 0
Inspiriert durch "Scorch Works" hab ich als Zielhilfe, einen LED-Ring samt verstellbarer Halterung konstruiert. Wer einen K40 sein Eigen nennt weiß wofür das Ding gut ist. Es sind 4 Gruppen in Serie zu je 2 LED´s Parallel. (3mm LED) so ergibt sich eine Spannung von 12 Volt. Da ich schon ein 12V Netzteil für meine Wasserkühlung mit 2 Lüftern und Pumpe verbaut habe war die Stromversorgung schon vorhanden. Ein Externes Steckernetzteil 12V 0,5A für kleines Geld geht ja auch.
Topics: laser_cutter, stl, k40, Laser, lasercutter, K40_Laser, laser_engraver, thingiverse, laser_K40,...
9
9.0
Apr 27, 2021
04/21
by
Mr. DIY3DTech Dot Com (DIY3DTech)
data
eye 9
favorite 0
comment 0
This is a remix of (http://www.thingiverse.com/thing:1063067) removing the second laser and adapting it for a small 5 volt point laser (get then here: https://goo.gl/aogLBK ) . If you are looking for other K40/eBay CO2 laser parts, we have assembled these lists: **Honey Comb Beds:** http://diy3dtech.com/co2-laser-engraver-cutter-honeycomb-bed/ **Purchase a CO2 Laser:** http://diy3dtech.com/purchase-laser/ **Jackstand Options:** http://diy3dtech.com/lab-jack-stand-for-co2-laser/ **Upgraded...
Topics: thingiverse, CO2_Laser_Cutter, lasercutting, laser_engraver, laser-cut, laser_cutting, DIY,...
7
7.0
Jan 19, 2021
01/21
by
John Stith (functionaldiyer)
data
eye 7
favorite 0
comment 0
I designed this because I thought it would be a lot of fun to have around, and who doesn’t want a laser!? It is built from old Monoprice Maker Select parts, which was the constraint on size. But it is meant to be completely scalable. If you wanted to make it 4’ by 4’ then if you change the size of the bearings and adjust holes that should be entirely plausible (it would lack strength though using unsupported rods but you get my point). The laser engraving unit is 2.5 watts and works...
Topics: lasercutter, lasercutting, diy_laser_engraver, lasercut, laser_cutting, engraver, CNC_Machine,...
8
8.0
Jan 17, 2021
01/21
by
James Schnaider (jrs824)
data
eye 8
favorite 0
comment 0
This fits over the end of the typical Chinese diode lasers which are in the ~48mm square housings (eg. the 10 or 15w lasers). This is for a laser with a fixed focal length of around ~18mm. The laser's cutting was improved using air, less burning on the edges. I have used ~20psi which seems to work well. For hose i used some surgical tubing. In the images of the cut leather, it would have worked better if i taped down the edges because it curled up when heated and changed the focal length, but...
Topics: Electronics, thingiverse, diode_laser, laser_engraver, laser_cutter, laser_etch, stl
9
9.0
Apr 30, 2021
04/21
by
frnck meyer (sigma9)
data
eye 9
favorite 0
comment 0
lasercut by Franck Meyer Technician Troteclaser French https://www.troteclaser.com/en/ Acrylic PMMA Coulé 5mm Parameters Laser 30 W Trotec Speedy 100R Cut : Red Power : 85 Speed: 0.7 Engraving : Black Power : 55 Speed : 100 Marking : Green Puissance : 35 Speed : 4,5
Topics: stl, laser_cut, laser_engraver, laser-cut, Games, laser_cutting, thingiverse, laser, lasercut
8
8.0
Jan 17, 2021
01/21
by
Mr. DIY3DTech Dot Com (DIY3DTech)
data
eye 8
favorite 0
comment 0
While I was working another project, I came across these cheap laboratory adjustable jack-stands ( http://amzn.to/2hJSitj ) thought to myself these would make a great base for an adjustable laser bed. However the 8 inch version sat too high but the 4 inch was just right high wise but 4 inches was too small for the bed so I created a 3D printed version of a bed extender in bot 6in x 6in (which is the typical size of material I use and another 6in x 8in version for larger stock. Also keep in mind...
Topics: lasercutter, CO2, CO2_Laser_Cutter, thingiverse, laser_engraver, laser_cutter, co2_laser, Parts,...
3
3.0
Jan 8, 2021
01/21
by
egal egaler (Al2002)
data
eye 3
favorite 0
comment 0
Das ist ein einfacher halter für ein laserpointer am K40 co2 laser. benötigt wird nur eine m3 mutter und eine m3 4cm schraube!
Topics: Other, laser_cutter, stl, lasercut, k40, K40_Laser, laser_engraver, thingiverse, laser_cut,...
3
3.0
Jun 11, 2021
06/21
by
Max Darkdog (Maxdarkdog)
data
eye 3
favorite 0
comment 0
__________ Please consider clicking the "I made one" button and sharing pictures of your print ^^ If you like my work give me a like, it means a lot to me. __________ I made this thing to allow more airflow going in my k40 and also to avoid laser radiation to escape from the stock vents Air can pass through but light can't If you like my work
Topics: laser, K40_Laser_L, thingiverse, K40_Laser, laser_K40, laser_engraver, lasercut, k40, laser_cutter,...
6
6.0
Jan 19, 2021
01/21
by
Paul Jewell (Poss272)
data
eye 6
favorite 0
comment 0
I got my new 17W diode laser from Annoy-Tools on Ali-express. Unfortunately, when I put it all together, there was nowhere to mount the laser control board. So.. about 10 mins on Fustion360 and we have one. Printed it in ABS and used the existing bolts on the carriage to mount it. Then a cable-tie through the provided hole and the control board is firmly mounted.
Topics: Electronics, laser_cutting, thingiverse, Laser, laser_engraver, laser_cutter, stl
9
9.0
Apr 28, 2021
04/21
by
Florian (Blacklion83)
data
eye 9
favorite 0
comment 0
Hi, I used my chinese laser cutter for one year now. And every time I cutted some plywood, I had some hard fumes on the edges. I had a lot of rework on these parts like sanding. So I decided to look to other Supplier to see there systems of Air Assists. By Epilog I found a nice and interesting System. I tried to reproduce the system by myself with also a smaller nozzle (1mm now) to have a hard and fast air blowing directly onto the cutting area. For the hose i used an FESTO 6 strait quick...
Topics: thingiverse, laser_cut, laser_engraver, laser_cutter, Parts, CNC_Laser, stl, lasercut, lasercutter,...
11
11
Apr 30, 2021
04/21
by
frnck meyer (sigma9)
data
eye 11
favorite 0
comment 0
lasercut by Franck Meyer Technician Troteclaser French https://www.troteclaser.com/en/ Medium 5mm Parameters Laser 30 W Trotec Speedy 100R Cut : Red Power : 100 Speed: 0.7 Engraving : Black Power : 50 Speed : 50
Topics: stl, laser_cut, laser_engraver, laser-cut, laser_cutting, lasercutting, People, thingiverse, laser,...
4
4.0
Apr 1, 2021
04/21
by
ol e (xsvmfhzwg4416zp)
data
eye 4
favorite 0
comment 0
Test mit 100mm/s https://www.youtube.com/watch?v=rYHjUQ8j9-A Neubau eines 40W Co2 Laser Da das V Slot Profil in Germany schwer zu bekommen ist und ich ein Freund von Linearschienen bin, hier eine Version von mir den K40 auf ein neues Level zu helfen. Als Tube Mount nutze ich das vorhandene Design von https://www.thingiverse.com/thing:2259794 Ist alles noch ziemlich Beta und eines meiner ersten Designs daher seid nett zu mir. ;) Ich hoffe die Maße passen alle, leider sind die Spiegel noch nicht...
Topics: thingiverse, K40_Laser, laser, laser_K40, DIY, co2_laser, k40, laser_co2, stl, co2
4
4.0
Jan 13, 2021
01/21
by
RCWeinstadt (RCWeinstadt)
data
eye 4
favorite 0
comment 0
This is a "screwdriver" for the lenstubes of lasercutter /-engraver with a 20mm lens.
Topics: k40, screwdriver, thingiverse, china_laser, stl, laser, DIY, lense, lasercutter, CO2_Laser_Cutter,...
2
2.0
Apr 20, 2022
04/22
by
Michal Brigant (IInickII)
data
eye 2
favorite 0
comment 0
Mounts for table for K40 CO2 chinese laser. I used it to attach aluminium plate to the laser chasis. For connecting together you will need M6 screws and nuts and M4 screws for connecting aluminium plate and holders. Slovak: Uchytky pre vymenu "stola"na cinskom laseri K40. Ako stol som pouzil hlinikovu platnicku na ktoru som prisroboval stycnikove dosky (pouzivaju sa pri vyrobe vaznikovych krovov, kupite v lepsich domaci hpotrebach alebo spojovacom materiale). Platnicka je potrebna aby...
Topics: laser, thingiverse, lasercutter, Machine Tools, k40, co2_laser, laser_cut, laser_engraver, stl,...
10
10.0
Mar 9, 2021
03/21
by
J. H. (DB3JHF)
data
eye 10
favorite 0
comment 0
This is a laser cradle fo the opensource scanner project Fabscan Pi Cube. Depending on the diameter of the used laser module there are three versions (8mm, 9mm and 12mm diameter). This thing makes the needed adjustments simple, easy and time saving. The base (platform) is the same. A clamp is used for fixing the laser module. A small notch can be used to check the exact angle of 33.1929 degrees). I decided to use a M6 screw as rotation axis - so a Nema 17 motor axis should fit too.
Topics: 8mm laser, 3D_Laser_Scanner, laser holder, laser scanner, stl, thingiverse, 9mm laser, fabscan,...
8
8.0
Apr 17, 2021
04/21
by
vitalii gavriliuk (molotovec)
data
eye 8
favorite 0
comment 0
Housing for Electronic 12V TTL Step-down Laser Diode LD Power Supply Driver Board Stage Dimentions- 30x50x22 Used magnets: R1 H1 R1.5 H3
Topics: laser_cutter, thingiverse, stl, Laser_Driver, DIY, laser, cnclaser, laser_engraver
8
8.0
Apr 17, 2021
04/21
by
William Snowden (BaronVonKhaos)
data
eye 8
favorite 0
comment 0
Remixed Avernois k40 air assist .Svg to work with my current setup. Very similar to his design, I just redesigned the armatures to accommodate my 8mm OD tubing and bike pump needle to get a better focus of the airflow on the material, and area being cut. Be sure when assembling this, to start from the bottom and work your way up. Also the connector pieces (U shaped pieces) are intentionally by the original designers, slightly smaller than the surfaces they fit around. I found that using a pair...
Topics: laser_cut, K40_Laser, laser_cutter, thingiverse, stl, Parts, laser, k40
8
8.0
Jan 17, 2021
01/21
by
KIMS3DIY (thenomadsoul_)
data
eye 8
favorite 0
comment 0
Air assist for the K40, stainless steel tube 8 mm
Topics: co2, DIY, diy laser, CO2_Laser_Cutter, thingiverse, co2_laser, K40_Laser, k40, stl, laser
4
4.0
Apr 8, 2021
04/21
by
souriceau (souriceaux06)
data
eye 4
favorite 0
comment 0
A file reworked and adapted for laser you have others here: dxf-world.de
Topics: laser-cut, laser, stl, thingiverse, laser_cutter, Animals
4
4.0
Mar 15, 2021
03/21
by
Robert Mech (rwmech)
data
eye 4
favorite 0
comment 0
BOM is coming soon. These files go with the DIY Laser Engraver Video series by MakersMashup. This is a work in progress until the second video is released. https://www.youtube.com/watch?v=EiLW0ShoJSo
Topics: laser, thingiverse, DIY, laser_engraver, stl, laser_cutter
10
10.0
Apr 30, 2021
04/21
by
Jay Johnson (jtechphotonics)
data
eye 10
favorite 0
comment 0
There have been a lot of people building using the openbuilds platform, so we decided to make a mount for the front of the spindle holder to make it easy to have a spindle and a laser. This mount is 3D printed and will fit using the M5 screw holes on the spindle mount. Attach the laser using the provided 6-32 screws by placing the screw in the back of the mount and using the nut in the front. Attach the laser first, then attach the assembly onto the spindle mount. Note that the stl needs to be...
Topics: stl, laser_engraver, DIY, laser_cutter, CNC_Laser, thingiverse, laser, lasercut
8
8.0
Mar 25, 2021
03/21
by
Luca Bertuolo (lucasss)
data
eye 8
favorite 0
comment 0
This is a remix of this laser engraver: https://www.thingiverse.com/thing:819755 The outer dimension is 420*420mm, and the laser is a 2.5W blue. I've add a Y motor spacer printed in PETG, so Y axis will be more rigid and solid. I've also add an endstop holder, it can be used with M5 screws... Edit. Added a few photos of some work... 29.03.2017: Added a new endstop holder for small endstop (Laser_Engraver_X_Endstop_S-M.stl) 11.08.2017 Added the arduino holder for 2040 profiles...
Topics: stl, laser_cutter, thingiverse, laser, Hobby, laser_engraver
4
4.0
Mar 22, 2021
03/21
by
Bill Bruce (theBillBruce)
data
eye 4
favorite 0
comment 0
This is my next project. Designed around the PLH3D-6W-XF Engraving Laser Head. Parts ordering starts this week and so does printing. I'll update this with an enclosure eventually and also any revisions once the design bugs are worked out.
Topics: stl, Electronics, laser, thingiverse, laser_engraver, laser_cutter
4
4.0
Mar 13, 2021
03/21
by
Andrea (apx_thingiverse)
data
eye 4
favorite 0
comment 0
Simple and fast printing K400 foot. Absolutely necessary for my bed mods, inspection and cleaning. Can be installed with 3M VHB tape (or other brand) directly under the laser or can be screwed in place using the 5,5mm hole (for M5 screw) 20% infill is ok, but if you want to test it with 15% or even 10% I think it will be hard enough
Topics: laser, thingiverse, K40_Laser, laser_cutter, stl, DIY
3
3.0
Dec 13, 2021
12/21
by
Isabelle Marchand (IsabelleM)
data
eye 3
favorite 0
comment 0
Decoration for Christmas. File created with Lightburn
Topics: DIY, stl, laser_engraver, thingiverse, laser, laser_cutter
3
3.0
Oct 26, 2021
10/21
by
BigManStudios.co.uk (Salti)
data
eye 3
favorite 0
comment 0
Remix of hhttps://www.thingiverse.com/thing:4067385 That is a Remix of https://www.thingiverse.com/thing:3061893 - Air Assist Tube Holder + Drag Chain (that carries air assist and laser power) Allows for the fitting of a Cloudray K40 12mm Head to replace the stock head. Cloudray head expects the beam at 6-9mm higher than the stock head. This allows you to drop the head body down to match. Head and Mirror Frames: "Cloudray CO2 Laser Head Set Dia 12mm FL 50.8mm for 2030 4060 K40 CO2 Laser...
Topics: laser_K40, Laser_Head, mount, Laser_Head_Mount, laser_cutter, Hobby, K40_Laser, stl, shifter,...
8
8.0
Jun 12, 2021
06/21
by
(OBUQ)
data
eye 8
favorite 0
comment 0
Summary Identical to Acrylic Refraction Lamp, but in a box! kind off.. you can put your pencils in there x) Designed for 3mm in MDF and 3mm acrylic. Kerf compensation for a 150w glass tube laser. Enjoy! Give OBUQ a like on fb: www.fb.com/obuq.design
Topics: laser_cutting, laser, lasercutter, led, lamp, refraction, acrylic, light, thingiverse, laser-cut,...
7
7.0
Jun 11, 2021
06/21
by
(OBUQ)
data
eye 7
favorite 0
comment 0
Summary Made this as a display case. Maybe with a reinforced handle and a lock, it could be functional... ;) Designed for 3mm MDF. No kerf compensation. Enjoy! Give OBUQ a like on fb: www.fb.com/obuq.design
Topics: laser_cutting, laser, box, lasercutter, lasercutting, storage, mdf, thingiverse, laser-cut,...