2
2.0
web
eye 2
favorite 0
comment 0
Princess Yuna: The Last Jedi Dragon Master Wikia dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Princess Yuna: The Last Jedi Dragon Master Wikia,...
10
10.0
Jan 18, 2021
01/21
by
Zach Woudstra (MightyMaus)
data
eye 10
favorite 0
comment 0
A very simplistic model (I made it in about 15 min) of Supreme Leader Snoke's Mega-class star destroyer the Supremacy from the Last Jedi. Note: the ship is not to scale with the Microfighters Capital ships. I am open to sugustions for improvements
Topics: Vehicles, the_last_jedi, thingiverse, stl, star_wars
10
10.0
Jan 18, 2021
01/21
by
Tony Galle (dockboy512)
data
eye 10
favorite 0
comment 0
This is a very quick rendition of Kylo Ren's TIE Silencer. I modeled it in SketchUp for my son. It's very low detail (intentionally), and not terribly accurate, but it makes a fun little model when it's done. This printed fairly well in a vertical orientation (wingtips up). I used supports. NOTE: The file exported in a strange way, so it sits at an angle when you import it. I had to align faces to the print bed before starting.
Topics: Vehicles, the_last_jedi, thingiverse, stl, star_wars
8
8.0
Apr 17, 2021
04/21
by
Brian Anderson (stormtrooperguy)
data
eye 8
favorite 0
comment 0
This is a variant on my existing TFA pilot chest box. The same basic parts are there, but I've put in holes for the LEDs that weren't seen in TFA. You'll need to print 1x: - center plate - main box - round button 2 each of: - square button 1 - square button 2 - rectangle button - rectangle button hole For the lights to work, you'll need to print the 4 square buttons in translucent filament, or replace them with cut acrylic (which would look better!). If you do print them, I recommend 100%...
Topics: star_wars, Costume, the_last_jedi, thingiverse, xwing, stl, cosplay
10
10.0
Jan 18, 2021
01/21
by
Zach Woudstra (MightyMaus)
data
eye 10
favorite 0
comment 0
First Order Dreadnought from the Last Jedi. A little simple, but this is the first 3D CAD model I have ever made. You will need two small nails and a few drops of superglue to keep the cannons in place. (See pictures) p.s. I used the wrong glue in my model in the picture, so that is why it is messy. If you glue it right, it will look fine.
Topics: Vehicles, the_last_jedi, thingiverse, Dreadnought_class, stl, star_wars
7
7.0
Jun 20, 2021
06/21
by
The Legend (3DPropShop)
data
eye 7
favorite 0
comment 0
Jyn Erso EADU Cap Flashlight For More Star Wars Cosplay Items and Greeblies please checkout the following: https://www.etsy.com/ca/shop/The3DPropShop
Topics: cosplay, thingiverse, Costume, stl, star_wars, TLJ, The Last Jedi
10
10.0
Apr 18, 2021
04/21
by
Ben Hower (bh1138)
data
eye 10
favorite 0
comment 0
My model of the new "space-y" design for the gold dice in the Millennium Falcon cockpit and Han's landspeeder as seen in The Last Jedi and Solo: A Star Wars Story. With HD stills from the Blu-Ray, I'm pleased with the orientation and location of each symbol but if you notice any mistakes please let me know
Topics: han_solo, star_wars, thingiverse, the_last_jedi, stl, Props
9
9.0
Apr 17, 2021
04/21
by
Kato Tozier (Kato_Tozier)
data
eye 9
favorite 0
comment 0
The ski speeder from star wars episode 8
Topics: last jedi, Ski speeder, 3D Printing, star wars, thingiverse, stl, resistance
5
5.0
Mar 3, 2021
03/21
by
Vince (vballard424)
data
eye 5
favorite 0
comment 0
REQUIRES RESIZING This is a model I've been working on for about two months or so, couldn't figure out how to save my base sketch as a DXF, but finally figured it out and got the rest of it finished. This model was also designed to have the handle wrapped in leather or some kind of cloth, as I modeled the handle to be thinner to accept the wrapping.
Topics: force awakens, lightsaber, thingiverse, last jedi, star wars, stl, 3D Printing
7
7.0
Jun 20, 2021
06/21
by
Isaiah Ward (PloBoom)
data
eye 7
favorite 0
comment 0
I took a 42 inch piece of 1 1/4 inch PVC and super glued two of the blades to both of the ends. then I used red and silver spray paint and painted it those colors. sadly I didn't design a light saber dagger attachment. :( it is still sweet! *Please make sure that when you load this stl. into Repetier, Cura, etc. press the split object button or you will have a gap in the middle of the object!
Topics: Props, the last jedi, thingiverse, stl, star_wars, star wars 8
8
8.0
Jan 17, 2021
01/21
by
Lucas Konowitz (Lucassolvedbycode)
data
eye 8
favorite 0
comment 0
Its a christmas ornament
Topics: x-wing, the_last_jedi, xwing, thingiverse, starwars, 3D Printing, stl
4
4.0
Jan 15, 2021
01/21
by
Kyle Katarn The Rebel Agent (therebelagent)
data
eye 4
favorite 0
comment 0
Just modified original models (which are absolutely beautiful) to make them look at the sky. Used Blender, Simple Deform Modifier, Bend. I am sharing both version; sitting and screaming one, like the original designer did at https://www.myminifactory.com/es/object/3d-print-porg-star-wars-the-last-jedi-47553
Topics: star_wars, thingiverse, stl, the_last_jedi, porg, Toy & Game Accessories
4
4.0
Mar 25, 2021
03/21
by
Brenden Tyler (quadhua)
data
eye 4
favorite 0
comment 0
Right arm armor for the Praetorian Guard from The Last Jedi. Designed according to the 501st CRL so there are differences between this and the left arm armor. Make sure you're printing the correct arm.
Topics: stl, 501st, Praetorian_Guard, star_wars, thingiverse, Costume, the_last_jedi
4
4.0
Mar 25, 2021
03/21
by
Brenden Tyler (quadhua)
data
eye 4
favorite 0
comment 0
Left arm armor for the Praetorian Guard from The Last Jedi. Designed according to the 501st CRL so there are differences between this and the right arm armor. Make sure you're printing the correct arm.
Topics: stl, 501st, Praetorian_Guard, star_wars, thingiverse, Costume, the_last_jedi
11
11
Jan 18, 2021
01/21
by
Ryan (Archandachxs)
data
eye 11
favorite 0
comment 0
The resistance Strongest supporters Corvette From the last jedi and from Battlefront 2 need some Support
Topics: corvette, Star wars ship, the_last_jedi, Models, thingiverse, stl, resistance
10
10.0
Apr 17, 2021
04/21
by
Bruce Wayne (KnightLightFilms)
data
eye 10
favorite 0
comment 0
Model by Jace1969: Had the model separated into individual armor pieces for 3D printing
Topics: last jedi, Praetorian Guard, 3D Printing, armor, star wars, thingiverse, stl, cosplay
9
9.0
Jan 17, 2021
01/21
by
Joshua Driggs (zapwizard)
data
eye 9
favorite 0
comment 0
Star Wars, Sabacc Die, Six sided This is a recreation of the die seen in "Star Wars the Last Jedi", without a chain attachment. This allows for the die to be used in gaming. It was carefully designed from scratch. A variety of content sources were used to ensure that the die has the correct symbols, and orientation. The die is 16mm in size, the size of most common dice. The die symbols are easy to interpret. The "i" is 1, the "split circle" is 2, and the rest of...
Topics: sabacc, dice, the_last_jedi, thingiverse, Han_Solo, Dice, stl, star_wars
10
10.0
Jan 18, 2021
01/21
by
Ryan (Archandachxs)
data
eye 10
favorite 0
comment 0
Resistance bomber in the last jedi vs the First order Dreadnought
Topics: Models, the_last_jedi, thingiverse, star wars ships, stl, star_wars, resistance
10
10.0
Jun 20, 2021
06/21
by
Jonnyo85 (Jonnyo85)
data
eye 10
favorite 0
comment 0
This my low poly porg (Polys - 236) Proud and standing tall. You can follow me on Instagram Want to see what layer your printer is on? Geditor will process your gcode and edit it so that it will display your printers current layer on screen. I made it for myself and thought that i would share it. Geditor can be accessed Here
Topics: porg, thingiverse, stl, star_wars, bird, the_last_jedi, Animals, low_poly
11
11
Jan 18, 2021
01/21
by
Jeremy Connaughton (Jeremycon)
data
eye 11
favorite 0
comment 0
Hello this is my interpretation of Supreme Leader Snoke from Star Wars The Last Jedi. based on lots of pictures and film footage and designed in Sculptris. four files available, plinth is what it is Snoke no plinth (obvious) Supreme Leader Snoke (on plinth) and 'Supreme Leader Snoke larger' is on plinth but larger Snoke figure. Update just printed, printed @ 0.10 layer with 20% infill and supports, please see pictures would love to see other peoples prints so please post pictures if you can...
Topics: Supreme_Leader, the_last_jedi, thingiverse, starwars, snoke, People, Star Wars, stl
0
0.0
Aug 15, 2022
08/22
by
Diego Garcia (TheFoxInTheBox)
data
eye 0
favorite 0
comment 0
Original by SketchyFaez on Sketchup
Topics: Last_Jedi, Star_Destroyer, stl, Models, thingiverse, Star_Wars, Spaceship, Ship, Vessel
4
4.0
Apr 27, 2021
04/21
by
Travas soucy (Maker-Works)
data
eye 4
favorite 0
comment 0
Jedi Temple Banner template I'm using this to paint the symbol on to some fabric to make the banner.
Topics: Jedi, thingiverse, Art, star_wars, starwars, stl, the_last_jedi, Jedi_Knight
9
9.0
Jan 17, 2021
01/21
by
Tim Betz (MrFlibble)
data
eye 9
favorite 0
comment 0
Building Block model of a Porg from The Last Jedi +++ UPDATED FILES +++ Original files were sourced from the now defunct printabrick.org website and were quite low detail. All the files have been updated and now scale up much better. Tested up to 500% without any problems. Model by Iain Heath: https://www.flickr.com/people/ochre_jelly/ Build instructions available at: https://www.flickr.com/photos/ochre_jelly/albums/72157690344337144 You will need to print the following bricks: Yellow: 4085a x...
Topics: building_blocks, LEGO, the_last_jedi, Creatures, thingiverse, porg, stl, star_wars
4
4.0
Mar 8, 2021
03/21
by
Brenden Tyler (quadhua)
data
eye 4
favorite 0
comment 0
One of three designs for the Praetorian Guard helmets from Star Wars Episode IX: The Last Jedi. Because of similarities to Mandalorian helmets (e.g. Jango and Boba Fett's) it is often referred to as the "Mando" version of the Praetorian Guard. This model was made to match the details listed in the 501st Legion CRL for the Praetorian Guard but I haven't run it by any GMLs yet so run it by yours before you print it. I designed these files to fit my wife. Her head is probably smaller...
Topics: The_Last_Jedi, Star_Wars, stl, thingiverse, 501st, Mando, Costume, Praetorian_Guard
8
8.0
Jan 16, 2021
01/21
by
Chris Footner AMIMechE (ChrisF3D)
data
eye 8
favorite 0
comment 0
A 3D logo of the new star wars movie coming out! (Yet to print but should print perfectly) **i in no way own the logo or any rights to this
Topics: logo, the_last_jedi, thingiverse, 3d_logo, Signs & Logos, stl, star_wars
6
6.0
Apr 19, 2021
04/21
by
Massassi Order (MassassiOrder)
data
eye 6
favorite 0
comment 0
My static BB8, needed a stand. Else it just roles off. The stand part, should be printed 4 times. And can be connected with 4 1cm round rods. (I used aluminium ones). Then if needed extra parts can be added that lock the droid in position. As the picture shows you can use screws from the inside to attacks BB8 to the stand. These parts should be glued on. BB8 3D model can be found on bb8builders.club Please share your work in progress or/and your finished model on my Facebook group:...
Topics: thingiverse, BB8, stl, Stand, DIY, The Force Awakens, Star Wars, The Last Jedi
9
9.0
Jan 19, 2021
01/21
by
Trent White (trentwhite778)
data
eye 9
favorite 0
comment 0
3D printed parts to make a screen accurate bottle as seen in The Last Jedi where Luke...uuhh... milks a sea cow and drinks the green milk. Print the ring with no support For the base, you can print it right side up and it will print faster but will need support on the outside which will mar the surface. I recommend printing it upside down as it is oriented in the provided file. It will take longer and will print a lot of support on the inside but the outside will be much smoother, which matters...
Topics: The Last Jedi, stl, thingiverse, Thala Siren, Star Wars, 3D Printing, Milk bottle
12
12
Jan 18, 2021
01/21
by
Shahriyar Mustafiz (Shahriyar95)
data
eye 12
favorite 0
comment 0
This is the first thing I've modeled with in Fusion 360 and printed on my printer. It is a Rebel Alliance insignia from Star Wars and you can print it out and use it on anything. I personally turned it into a refrigerator type magnet, and I have been thinking of printing another one and using it as a pendent on my backpack. Also this is featured in a video I made, go check it out and subscribe to my Youtube channel.
Topics: the_last_jedi, Star_Wars_Rebels, thingiverse, Rebel_Alliance, Props, stl, star_wars
10
10.0
Apr 17, 2021
04/21
by
Carlos Pozo (carlosap)
data
eye 10
favorite 0
comment 0
This is designed to fit a spin master BB-8 droid. It is a work in progress.
Topics: The last jedi, BB-8 hidding box, BB-8, thingiverse, stl, Model Robots
9
9.0
Jan 18, 2021
01/21
by
Jeremy Connaughton (Jeremycon)
data
eye 9
favorite 0
comment 0
Hi Folks this is my design for Luke's Compass as seen in The last Jedi. Parts are separate for ease of printing and colour choice. Best printed sitting flat. I have updated the design slightly from the one I printed, the central column is slightly higher to show the orb a bit more. Use a bit of 1.75mm filament for the hinge to make it workable. Orb printed in clear and then painted with clear blue, the rest will be painted asap. All designed from the few pictures I could find. Enjoy and if you...
Topics: the last jedi, thingiverse, starwars, Compass, Luke_Skywalker_prop, Props, stl, star_wars
10
10.0
Jan 18, 2021
01/21
by
Ryan (Archandachxs)
data
eye 10
favorite 0
comment 0
The Vigil Cargo frigate of the resistance ship need some supports
Topics: cargo frigate, Models, the_last_jedi, thingiverse, star wars, star wars ship, stl
6
6.0
Mar 17, 2021
03/21
by
Shaun Allen (BulldogUK)
data
eye 6
favorite 0
comment 0
Chopped for a 200 x 200 x 180 bed. Grab yourself a couple of ref pics and assembly should be straightforward. be prepared for a lot of filling, sanding and post print work! I added a few details by hand post print just to make it pop. Panel lines scored in with the heat tool and some plastic card scratch work. Stands 620mm Came out nice, thanks for uploading jace!!!
Topics: ATM6, Last Jedi, Vehicles, star wars, Mega calibre six, stl, AT-m6, thingiverse, Walker
3
3.0
May 20, 2021
05/21
by
Ryan (RFBeats)
data
eye 3
favorite 0
comment 0
BB-9E mount for echo dot gen 2. Do in black, add chrome paint for panache. Should fit snuggly. If you print it let me know how it went :) After some feedback I've added some holes in the bottom for the audio to escape.
Topics: mount, star_wars, droid, Alexa, thingiverse, starwars, Household, the_last_jedi, stl, bb-9e
10
10.0
Jan 18, 2021
01/21
by
Ken Hoff (balooken)
data
eye 10
favorite 0
comment 0
You be the judge about whether TLJ sucked or was awesome, but I think the Canto Bight Police Officer's uniform was pretty boss! This Glow Rod model was based off of 2-3 resource photos and scaled based off of my matched dimensions (meaning I measured the thumb of the guy in the photo and based all of my measurements off of the ratio up to my measured thumb) My source photos even differed, so I modeled the version I saw in the limited amount of material I've seen. I may do additional versions on...
Topics: TLJ, The Last Jedi, Canto Bight, thingiverse, Police, Glow Rod, Star Wars, Props, stl
14
14
Jan 3, 2021
01/21
by
Ryan (Archandachxs)
data
eye 14
favorite 0
comment 0
First order dreadnought From Star Wars The Last Jedi. 19'' L / ( 2'' H with the Bridge) 9" W This is just a proto type so, it not close to the originial so, go ahead, remix it if you want to This took me 4 weeks to make it.......... A Nightmare
Topics: stl, star_wars, the_last_jedi, Star wars ships, first_order, thingiverse, Dreadnought_class, Models
11
11
Jan 19, 2021
01/21
by
Ken Hoff (balooken)
data
eye 11
favorite 0
comment 0
This is the second costume prop I've modeled for a Canto Bight police officer's uniform. I had a limited amount of source material to use for reference and measure, but over all I like it, it should be fairly close to accurate, and will use it for a costume someday. Just so you know... I have a helmet in the works! :) Enjoy! *** UPDATE *** (10/30/2018) Updated the top and shocker tips for strength (files: top_shockers_ver3_2.stl and shocker_tip_improved_2.stl) The plan is to get machined...
Topics: cosplay_weapon, Canto_Bight, costume, The Last Jedi, Costume, thingiverse, police, prop, stl,...
9
9.0
Jan 17, 2021
01/21
by
robert spier (spierr)
data
eye 9
favorite 0
comment 0
If you saw the movie The Last Jedi Rose Tico had a ring that she gave to a little boy to let him know the rebels are out there and will protect him. Here is an attempt at replicating the ring. It does not have the ability to change like in the movie, but if you want to show your support of the Rebels you will want to print this out. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/aua642XSq3v
Topics: The Last jedi, ring_jewelery, thingiverse, Rebel_Alliance, ring, Jewelery, 3D Printing, stl,...
9
9.0
Jan 19, 2021
01/21
by
Teagan Beal (gammax)
data
eye 9
favorite 0
comment 0
So I am putting together phasma Cosplay I can find amor, blast but phasma's baton aka the spear can't be found. So I created it. Its not quite 3d print ready ie its too big for most prints at 12.25 in or 311mm tall. I will be fixing that in the future. For now your on your own. You just need to print two and I added 2 holes on the bottom that should fit a 1" finishing nail cut in half to act as guide pins and some support when glued in place. I split it into 2 pieces so they will fit on...
Topics: captain_phasma, the_last_jedi, movie, thingiverse, prop, Movie_Prop, phasma, Props, stl, star_wars
10
10.0
Jan 18, 2021
01/21
by
Ben Hower (bh1138)
data
eye 10
favorite 0
comment 0
My take on the Jedi crusader pendant kept in Luke Skywalker's hut on Ahch-To in Star Wars: The Last Jedi. This file is only the metal socket that holds the crystal fragment. For my own necklace, I used a small quartz pendant I found at a craft store as the crystal.
Topics: star_wars_props, the_last_jedi, Costume, thingiverse, star_wars_cosplay, cosplay, stl, star_wars
8
8.0
Jan 17, 2021
01/21
by
Chris Kaminsky (djcrisco)
data
eye 8
favorite 0
comment 0
This is the necklace/pendant from The Last Jedi that rebel Rose Tico wears
Topics: The Last Jedi, Rebels, Necklace, thingiverse, Rose Tico, Jewelry, Sci-Fi, jewelry, stl, star_wars
10
10.0
Apr 18, 2021
04/21
by
Ken Hoff (balooken)
data
eye 10
favorite 0
comment 0
Continuing with modeling all of the costume elements of the Canto Bight Police Officer costume from The Last Jedi, this piece is the "Scrambled Long-Range Comlink" worn on their belt. This is a solid version with a belt clip if you just want to print it, surface finish it, and paint it for use. I'm going to create another version that will be hollow for getting electronics and a battery inside so that when you click the side button, the red light in the front will light up. I may also...
Topics: costume, prop, Star Wars, Canto Bight, Costume, thingiverse, Police, stl, The Last Jedi, TLJ,...
10
10.0
Jan 18, 2021
01/21
by
Ryan (Archandachxs)
data
eye 10
favorite 0
comment 0
A Gigantic Warship with an Industrial center and a Hunter's secret makes this Mobile Capital, Snoke's Supreme leader Mega Flagship. The Supremacy (I'll let you remix this ship) You want to open this file first before you download it
Topics: the Supremacy, The_First_Order, Super dreadnought, Star wars ship, the_last_jedi, Models,...
6
6.0
Mar 15, 2021
03/21
by
Long Quang (Longquang)
data
eye 6
favorite 0
comment 0
Luke Skywalker stencil
Topics: skywalker, thingiverse, luke, luke_skywalker, jedi, star_wars, the_last_jedi, stl, 2D Art,...
6
6.0
Mar 17, 2021
03/21
by
Ken Hoff (balooken)
data
eye 6
favorite 0
comment 0
Wrist comlink/communicator for the Canto Bight Police Officer. Sew the bottom piece to your jacket wrist, and then Velcro the inside of the top piece to Velcro on the sewed-on piece. Suggested to print it on it's side or at a high resolution for the detail. Paint an aluminum color and weather it with black. See attached photo for colors and black portions. Also working on a magnetic design as well. Enjoy!
Topics: comlink, Canto Bight, cosplay, TLJ, Wrist, Costume, Police, stl, Star Wars, communicator,...
4
4.0
Jun 11, 2021
06/21
by
Alexander Crim (The_Melon_Felon)
data
eye 4
favorite 0
comment 0
This is Cin Drallig's lightsaber from the Clone Wars. It is a combination of two of the other clan sabers used by many of the Jedi. For printing, you need 2 Upper Buttons, 2 Lower Buttons, 5 Gold Emiiter Discs, 5 Silver Emitter Discs, and one of everything else. This lightsaber is compatible with my lightsaber belt clip: https://www.thingiverse.com/thing:4741141 This is a remix of https://www.thingiverse.com/thing:2096213 and https://www.thingiverse.com/thing:2243130
Topics: starwars, the_last_jedi, drallig, star_wars, Toys & Games, clone_wars, jedi, thingiverse, cin,...
6
6.0
Mar 17, 2021
03/21
by
Ken Hoff (balooken)
data
eye 6
favorite 0
comment 0
This is the Canto Bight Police Officer's data pad, a belt accessory found on their right side, sometimes covered by their cape. I've cut out 4 holes for 3mm red LEDs on the left side, as well as space (in the top piece) for 3 coin cell batteries (2032) inside the shell. When I wire it up, I will provide instructions and a wiring diagram. I've also included a sticker sheet (in JPEG and an included Photoshop file) for the two "screen" areas, so print them out as a nice vinyl sticker,...
Topics: data pad, Canto Bight, cosplay, TLJ, Costume, Police, stl, Star Wars, thingiverse, prop, costume,...
10
10.0
Jan 18, 2021
01/21
by
Ben Hower (bh1138)
data
eye 10
favorite 0
comment 0
My take on the Ben Solo (Kylo Ren) blue lightsaber seen in the flashback sequences of Star Wars: The Last Jedi. Based on my model of his crossguard saber.Still may undergo some design tweaks pending better reference photos Updated on 4/8/18 with some more features I left off of the original without access to high-res screenshots
Topics: ben_solo, the_last_jedi, Costume, thingiverse, cosplay_prop, cosplay, Kylo_Ren, lightsaber, prop,...
4
4.0
Sep 14, 2021
09/21
by
Jason McLachlan (Jace1969)
data
eye 4
favorite 0
comment 0
Another one on my many to do list that finding reference photos proved to be challenging. I took as much as I could from the Battlefront game, toy models and any other pictures that were available on line. I cant say for sure that it is 100% accurate, but once again it is as close as I could get with the information at hand https://www.starwars.com/news/d23-expo-2019-jet-trooper-from-star-wars-the-rise-of-skywalker-revealed As always do check the sizing suits your needs and although the STL...
Topics: stl, thingiverse, 3D Printing, the_last_jedi, Jedi, Trooper, Star Wars, Bad Batch, Clone,...
7
7.0
Jan 20, 2021
01/21
by
Ken Hoff (balooken)
data
eye 7
favorite 0
comment 0
Here are the ear cups that go with the Canto Bight Police Officers helmet strapping.
Topics: ear cups, The Last Jedi, Canto Bight, thingiverse, chin strap, Helmet, Police, Star Wars, ear,...
Will the new Star Wars movie survive the test of time? Will it even survive 24 hours? Source: https://www.youtube.com/watch?v=GRkHQ3RCW34 Uploader: Noah Antwiler
Topics: Youtube, video, Film & Animation, Noah Antwiler, Spoony, Spoony Experiment, Star Wars, Last...