6
6.0
Apr 1, 2021
04/21
by
François BENSI (Ikhesef)
data
eye 6
favorite 0
comment 0
Kit fabriqué pour extraire les roulements LM8UU de 17mm sur une tête de fraisage d'une CNC 3018Pro. Peut être utilisé pour extraire des roulements de 24mm. J'utilise une tige filetée de 80mm M8, longueur à adapter selon besoin et 1x rondelle M8. Le kit est utilisable pour le montage des roulements avec 2x rondelles M8. Kit manufactured to extract 17mm LM8UU bearings on a milling head of a CNC 3018Pro. Can be used to extract 24mm bearings. I use a threaded rod of 80mm M8, length to adapt...
Topics: Linear_Bearing_Mounts, lm8uu_linear_bearing, thingiverse, cnc3018, 3018_pro, bearing_extractor,...
12
12
Apr 1, 2021
04/21
by
Corwin Whitefield (Corwin)
data
eye 12
favorite 0
comment 0
This is the second draft of work towards a linear bearing and rail system containing only one non-printed part, the rolling elements (6mm airsoft BBs). Why airsoft BBs? They're cheap, they're round, they're biodegradable, and they're easy to get. The system is currently at the "workingish" stage of development. The original draft from a year ago proved to have some major problems when I finally was able to print it, so I threw a lot of stuff from it out and focused on getting...
Topics: Linear bearing, thingiverse, bearing, printable_linear_bearing, Other, Linear rail, stl
7
7.0
Jan 19, 2021
01/21
by
Cristian Leiva (nodoleiva)
data
eye 7
favorite 0
comment 0
KP08 Homemade con 608ZZ Necesito efectuar un prototipo funcional de un CNC que va a usar piezas estándar de construcción así que estuve diseñando las mismas en 3D e imprimiendolas como para hacer la prueba de armado y porque no funcionamiento. Impreso en PLA capa 0.3, 40% de infill, pico de 0.6. El rodamiento es un 608ZZ.
Topics: linear_bearing, stl, Robotics, thingiverse
4
4.0
Mar 20, 2021
03/21
by
unknown user (drewal79)
data
eye 4
favorite 0
comment 0
A Printable linear bearing that uses 1.77mm or .177 buckshot as the bearings. Just print out both the cap and body, drop in your bearings, put in a few screws or add some glue, and BAM! I cannot and will not be held responsible for any damages of any sort.
Topics: Other, thingiverse, stl, linear_bearing
6
6.0
Apr 20, 2021
04/21
by
Cristian Leiva (nodoleiva)
data
eye 6
favorite 0
comment 0
Rodamiento lineal hecho con balines esfericos calibre .177 (4.5 mm). Se tomó la idea original y se dibujó de nuevo usando openscad para poder hacerlo parametrizable a otras dimensiones. Impreso en PLA con capa de .2, pico de 0.6, 2 perímetros, 4 top/bottom. Un video de funcionamiento en https://youtu.be/dh2CoMs1HAo
Topics: thingiverse, stl, linear_bearing, Robotics
11
11
Jun 7, 2021
06/21
by
Emmanuel (watsdesign)
data
eye 11
favorite 0
comment 0
Inspired by the above thing, I wanted to try a linear bearing made using airsoft balls. http://reprap.org/wiki/Printable_linear_bearing The linear-2.2 (same has 2.1 but closed) have a bit of friction (because the balls don't make a loop) but it works (25mm long x 23,41mm ext diam) Video : http://youtu.be/GTtfGQe4o7o
Topics: Other, linear bearing, printable bearing, thingiverse, printable_linear_bearing, stl, BBs, 6mm BBs
7
7.0
Jan 19, 2021
01/21
by
Cristian Leiva (nodoleiva)
data
eye 7
favorite 0
comment 0
Soporte Lateral SHF13 para guia redonda D13. Necesito efectuar un prototipo funcional de un CNC que va a usar piezas estándar de construcción así que estuve diseñando las mismas en 3D e imprimiendolas como para hacer la prueba de armado y porque no funcionamiento. Impreso en PLA capa 0.3, 40% de infill, pico de 0.6.
Topics: linear_bearing, stl, Robotics, thingiverse
8
8.0
Jan 21, 2021
01/21
by
Scott Alfter (salfter)
data
eye 8
favorite 0
comment 0
A simple tool to press bearings out of (and back into) mounts, housings, etc. I needed to replace one of the X-carriage mounts on my A8 to accommodate a replacement idler pulley that was wider than the original; this made quick work out of removing the LM8LUU bearing from the original mount. I had already pressed a replacement bearing into the replacement mount, but I suspect this would've also worked well to install the bearing. A few light taps with a small hammer on the plastic rod is all it...
Topics: linear_bearing, Tools, stl, thingiverse
8
8.0
Jan 19, 2021
01/21
by
Андрей Коротков (SiberK)
data
eye 8
favorite 0
comment 0
Linear recirculating ball bearing 10mm (from 4.5mm steel BB's) https://youtu.be/jR-tOtsJ8MU После изготовления деталей протянуть по канавкам шарик чуть большего диаметра, чтобы сгладить заусенцы. Крепёж - шурупы 2мм х 8мм. Среднюю деталь можно масштабировать по высоте - получим подшипники разной длины. Если вторую...
Topics: linear_bearing, stl, Parts, thingiverse
6
6.0
Jan 19, 2021
01/21
by
Андрей Коротков (SiberK)
data
eye 6
favorite 0
comment 0
Linear recirculating ball bearing 10mm 5row (from 4.5mm steel BB's) v2 https://youtu.be/UeXYiThIdaU В этой версии упростил крепёж - это клипсы из PLA пластика и штифты из 1.75 филамента. Прижим шариков к валу сделал чуть слабее - скольжение стало более лёгким, но шарики не проскальзывают. Корпус сделал цилиндрическим для...
Topics: linear_bearing, stl, Parts, thingiverse
8
8.0
Mar 25, 2021
03/21
by
Mike Penny (MikeyP)
data
eye 8
favorite 0
comment 0
This is a closed bearing block for a 1" round, unsupported rail. It is a variant of my open bearing block inspired by WWWektor's contribution. The closed version was created to minimize the springy nature of the open block under the greater pressure of aluminum cutting. I have not tested this bearing block yet. I will report the performance when I do. I will be re-working my open bearing block (for a fully supported 3/4" rail) and will upload that model when it is ready for testing....
Topics: stl, Parts, linear_bearing, thingiverse
8
8.0
Jun 20, 2021
06/21
by
Steve R (SteveChief)
data
eye 8
favorite 0
comment 0
For a new project I ordered 2 x LMK 12LUU. But after 4 weeks waiting I made my own ... 2x Ball Bearings 605zz 16x M4x16 16x Inserts with 5mm OD from local hardware store Or 16x M5x25 Cheers & have fun
Topics: thingiverse, stl, 605zz, 2020, lm12uu_linear_bearing, 3D Printing, Linear_Bearing, 2020_extrusion
3
3.0
Jun 11, 2021
06/21
by
Ryan Singh (Brainy_Ryan)
data
eye 3
favorite 0
comment 0
This is a bearing Mount Used for mounting the z axis to rods
Topics: Linear_Bearing_Mount, lm8uu_mount, LM8, bearing_holder, Linear_Bearing_Mounts, lm8uu_holder, 3D...
7
7.0
Jan 19, 2021
01/21
by
Андрей Коротков (SiberK)
data
eye 7
favorite 0
comment 0
Linear recirculating ball bearing 10mm 5row (from 4.5mm steel BB's) https://youtu.be/wj5ts03exhs После изготовления деталей протянуть по канавкам шарик чуть большего диаметра, чтобы сгладить заусенцы. Крепёж - шурупы 2мм х 8мм. Если вторую крышку напечатать такую же как и первую - получится подшипник с пятью...
Topics: linear_bearing, stl, Parts, thingiverse
7
7.0
Apr 1, 2021
04/21
by
Jim McCracken (merlinjim)
data
eye 7
favorite 0
comment 0
I was working on a derivative of: http://www.thingiverse.com/thing:5830 when I realized I could make a printable linear bearing for it. This is that bearing. It provides three inner racetracks rolling against the inner axle. The length is adjustable to increase the number of ball bearings in contact with the inner axle. Longer length will be more stable therefore. To approximate the stability of the reprap based xy rider designs, you'd want at least two of these 35mm or greater in length on...
Topics: gun, thingiverse, openscad, upgrade, bearing, openscadtutorial, linear bearing,...
10
10.0
Apr 2, 2021
04/21
by
Corwin Whitefield (Corwin)
data
eye 10
favorite 0
comment 0
This is the first draft of a mostly printable linear bearing and a printable linear rail setup. I make no guarantees to prinability, usability, or sanity. I don't have a 3D printer, so I can't test it myself. If you try it, let me know! If you can't make it work, let me know! I'd like to make this work, so if you'd like to help me, help me help you help me help us all by telling me about it here or on the reprap forums. The non-printable part is the recirculating 6mm balls. Note on where to get...
Topics: Linear bearing, thingiverse, bearing, parts, printable_linear_bearing, Other, part, Linear rail, stl
6
6.0
Apr 1, 2021
04/21
by
Brian Bartlow (TheRooster)
data
eye 6
favorite 0
comment 0
In the comments from MakerBlock's blog post on the MakerBot blog, tre3 had the idea of making a linear bearing from plastic. Since I really like how my ball bearings turned out using steel BBs, I thought I'd try designing a linear bearing using the same bearings. The first step was to get the basic BB function working. I designed a "racetrack" so the bearings could make a loop and only contact the bar in a straight line. My original idea was to have three racetracks arranged so that...
Topics: thingiverse, bearing, BBs, printable bearing, 4.5mm BBs, linear bearing, printable_linear_bearing,...
9
9.0
Apr 27, 2021
04/21
by
Eduard Skrap (Skrap)
data
eye 9
favorite 0
comment 0
https://tinkercad.com/things/hRPcqUn2Z13
Topics: 3D Printing, stl, thingiverse, linear_bearing
8
8.0
Jan 16, 2021
01/21
by
Alexander Ye (yealexander)
data
eye 8
favorite 0
comment 0
Easy to print without support flat side down. Works pretty well, can hold huge loads depending on infill, for me 30% was more then enought. Of course you need at least 3 of them on 2 rails to make stable moving platform.
Topics: thingiverse, 608, linear_bearing, Hobby, stl
6
6.0
Jun 7, 2021
06/21
by
(keegi)
data
eye 6
favorite 0
comment 0
To practice OpenSCAD, I threw together something I imagined how a linear bearing might look like. It is most likely not yet useful as it is now. Let's make printable linear bearing out of it! :)
Topics: openscad, Other, thingiverse, Linear Bearing, stl
4
4.0
Mar 22, 2021
03/21
by
Thomas L (Thompson818)
data
eye 4
favorite 0
comment 0
Linear bearing mount for this 60595K73 from McMaster-Carr. The holes have clearance for 8-32 bolts.
Topics: bearing, Engineering, stl, linear_bearing, thingiverse
11
11
Jan 12, 2021
01/21
by
Tadeusz Puźniakowski (t4deusz)
data
eye 11
favorite 0
comment 0
This is my linear bearing for 20mm shaft. I made it to work with cheap rods. This should work super fine with precision rods, and works good with pipes and rods from your local hardware store
Topics: thingiverse, stl, Parts, 623zz, linear_bearing
9
9.0
Jan 14, 2021
01/21
by
Ian Chen (ianchen06)
data
eye 9
favorite 0
comment 0
A remix of pparsniak Smart bearing block https://www.thingiverse.com/thing:2043585, This version is 1mm longer in the base part to compensate for m3x10 screws with slightly larger heads that does not leave a flat surface in the original design. All credits go to pparsniak,
Topics: 3D Printer Parts, thingiverse, linear_bearing, stl
8
8.0
Jan 19, 2021
01/21
by
Cristian Leiva (nodoleiva)
data
eye 8
favorite 0
comment 0
Necesito efectuar un prototipo funcional de un CNC que va a usar piezas estandar de construcción así que estuve diseñando las mismas en 3D e imprimiendolas como para hacer la prueba de armado y porque no funcionamiento. Impreso en PLA capa 0.3, 40% de infill, pico de 0.6. El bloque ya tiene incluido el buje, pero editando el openscad provisto se puede eliminar para aceptar un rodamiento lm13uu real.
Topics: thingiverse, Linear_guide, linear_bearing, Robotics, stl
9
9.0
Apr 27, 2021
04/21
by
Coder-Tronics (Coder-Tronics)
data
eye 9
favorite 0
comment 0
**Summary** I have been playing around with bearings designs lately and thought I would share this latest hybrid 8mm bearing. The video at the bottom demonstrates the finished product on a 8mm linear shaft. https://youtu.be/HjRh_Fa9G2I It makes use of commonly available PTFE tubing for the area which is in contact with the linear shaft, combined with a printable bearing housing. This has quite a few advantages; as it's light weight, PTFE has an extremely low friction coefficient and if the tube...
Topics: thingiverse, bearing, LMU8, lm8uu, linear_bearing, linear_bearings, 3D Printer Parts, stl,...
10
10.0
Apr 21, 2021
04/21
by
Emanuel Bucsa (emanuelbucsa)
data
eye 10
favorite 0
comment 0
lm8uu 3d printed holder. Made this to consume the least amount of material ~ 7-8 grams and be tough at the same time. It also carries 4 holes for M4 hex cap screws, so other printer modules can be attached to it easily. There's also a "lip" around the exterior that prevents the linear bearing from sliding out. The internal diameter is about 1/15th of a mm tighter than the lm8uu, so the bearing has no movement while it's in there. There are 2 versions included: the basic one with no...
Topics: thingiverse, linear bearing holder, stl, lm8uu_holder, 3D Printing, lm8uu linear bearing, lm8uu...
6
6.0
Apr 20, 2021
04/21
by
Jean-Luc Sandrone (Spitpt)
data
eye 6
favorite 0
comment 0
This holder dimensions are 35x25x25 for a 8mm diameter rod linear bearing
Topics: thingiverse, stl, linear_bearing, bearing_holder, DIY
4
4.0
Apr 13, 2021
04/21
by
Laurent FRANCOISE (diygallery)
data
eye 4
favorite 0
comment 0
This is a support for linear bearing KH1428PP, made by measuring the dimensions of a real one, which is hard to find.
Topics: thingiverse, bearing, linear_bearing, stl, Parts, support
5
5.0
Jun 7, 2021
06/21
by
Greg Frost (GregFrost)
data
eye 5
favorite 0
comment 0
Used for attaching an lm8uu linear bearing to a heated bed.
Topics: openscad, Other, LM8UU, thingiverse, Linear Bearing, stl
4
4.0
Apr 8, 2021
04/21
by
Ian Bradley (UkIan)
data
eye 4
favorite 0
comment 0
UPDATE: - Cleaned up some support lines Added a weight saving option to cut out some unneeded bits. Fixed some errors where supports didn't reach all the way. Added comments to the code. Description -- I was looking for a new linear bearing to use for the x carriage on a printer. This is my first attempt, and f me it works. It's not very parameterised, I'll look at changing that later. Currently it works with 623 bearings (10mm wide, 4mm wide, 3mm hole in the middle). The nice thing about this...
Topics: stl, thingiverse, linear_bearing, 3D Printer Parts
8
8.0
Mar 5, 2021
03/21
by
adam downes (xqtronixx)
data
eye 8
favorite 0
comment 0
12mm pulley to take 608 skate bearing. groove is 13mm in draeing but after printing with 0.4 tip is 12mm. 22mm od. 608 bearing
Topics: 3D Printing, stl, pulley, linear bearing, thingiverse
10
10.0
Apr 1, 2021
04/21
by
(CidVilas)
data
eye 10
favorite 0
comment 0
UPDATE: Fixed a few lines of code which made things wonky if you change the dimensions of the walls. Inspired by Nophead, I wanted to implement his ideas for Mendel90 into a printer design. I made an OpenSCAD script to generate the mount for his linear bearings. Hope it comes in handy to someone. Check out NopHead's blog. Its the best! http://www.hydraraptor.blogspot.com/ My design could be significantly optimized, but it does work.
Topics: mount, thingiverse, lm8uu, linear bearing, Other, stl
9
9.0
Jan 18, 2021
01/21
by
PROTORS Serbia (protors)
data
eye 9
favorite 0
comment 0
8mm linear bearing (LM8UU) holder like SC8UU for i3 style heatbed. **Visit us at [protors.co](https://protors.co)**
Topics: sc8uu_linear_bearing, 3D Printer Parts, lm8uu, SC8UU, thingiverse, SC8UU_Linear_bearings,...
9
9.0
Apr 8, 2021
04/21
by
eddie matejowsky (eddiema)
data
eye 9
favorite 0
comment 0
This is part of my Baby-Huey large format 3D printer project. http://nerdipedia.com/tiki-index.php?page=huey It may also be of use for other projects. Huey is a work in progress so the assembly has never been used in earnest. It was printed and assembled and seems to do what is it is supposed to do. This thing uses 4 skate bearing to travel along a 25.4 (or 25mm) square tube. It is not stable until it is attached to its mates and all four are supported by threaded rod (M6 but imperial might...
Topics: stl, thingiverse, linear_bearing, 3D Printer Parts
6
6.0
Jan 21, 2021
01/21
by
Mark Fruhauf (markfruhauf)
data
eye 6
favorite 0
comment 0
This is a work in progress, need to replace my linear bearings on my custom robobeast, the bearings are failing so want to print my own with delrin. i have 6 x 8mm liner stainless rods so it gets costly to purchase 3 sets of high quality 49mm x 8 mm bearings
Topics: delrin, Electronics, thingiverse, linear_bearing, bearing, stl
9
9.0
Apr 28, 2021
04/21
by
Enrique Barbeito (kriketronic)
data
eye 9
favorite 0
comment 0
Dual LM8uu holder. total size 80mm x 50mm x 20mm
Topics: thingiverse, bearing, 8mm, lm8uu, linear_bearing, 3D Printer Parts, stl, LM8UU_Bearing,...
10
10.0
Apr 30, 2021
04/21
by
Karoly Ish (karolyish)
data
eye 10
favorite 0
comment 0
Size changeable linear bearing done in freecad. Inner and outer radius. 6 holes change the radius accordingly. Don't have a clue on how todo full parameterisation, but as I get better of course quality of Freecad file will get better. Found that in PLA their is usually about 0.2mm shrinkage in overall diameter. So this needs to be accounted for. Found that once shrinkage is accounted for, a typical freeplay of about 0.05mm in the radius is possible. Some teasing of the part to get it onto the...
Topics: stl, linear_bearing, thingiverse, 3D Printer Parts
7
7.0
Mar 4, 2021
03/21
by
Philipp Klimek (Makersshop)
data
eye 7
favorite 0
comment 0
Updated Version: Bigger curves as the balls always get stuck in the curves, no matter what print quality. Use 6mm BBs as bearing balls. Can be used to move heavy objects or make bigger objects movable.
Topics: stl, 6mm_BBs, linear_bearing, Parts, thingiverse
4
4.0
Mar 21, 2021
03/21
by
Adolph Smith (Adolph)
data
eye 4
favorite 0
comment 0
To use a 6mm rod in 8mm rod space
Topics: 3D Printer Accessories, thingiverse, stl, linear_bearing
4
4.0
Apr 20, 2021
04/21
by
Simon Hersche (swiss_beluga)
data
eye 4
favorite 0
comment 0
Thanks to inks007 for this well made design. I did have some issues with the design: When I installed the y-axis on my new MK3s I noticed that it rubbed against the frame. Picture of it is attached. After learning how OpenSCAD works, I figured out how to adjust the design accordingly. Now the remixed version won't rub against the frame anymore. Everyone should just need to adjust this one parameter: bearing_od_loosen -> adjust it according to the bearing, printer settings and filament...
Topics: Prusa, thingiverse, Linear_Bearing_Mount, 3D Printer Parts, Linear_Bearing, stl, RJ4JP, Y-Axis,...
3
3.0
Jun 21, 2021
06/21
by
Racoon Noon (Racoon2020)
data
eye 3
favorite 0
comment 0
Another SC8 bearing holder with snap-in place for M3 hex nut. In order to mount below a printer 3.6mm bed, you would need 4x 22mm M3 hex skrews. I provide 2 model with different printing orientation and adjusted bearing size hole to account for FDM printing characteristics: - Side: hole size 15.35mm (this should give the strongest print) - Vertical: hole size 15.1mm (alternative in case of issue with the above)
Topics: lm8uu_holder, SC8UU_Linear_bearings, SC8LUU, thingiverse, sc8uu_linear_bearing, stl,...
9
9.0
Apr 24, 2021
04/21
by
Kevin (inventimark)
data
eye 9
favorite 0
comment 0
Here is a linear bearing for an 8mm rod. It uses 6 - 8x4x3 radial bearings with 20mm M3 bolts. It is meant for the X or Y axis.
Topics: 3D_printing, 3D Printer Parts, 8mm_linear_bearing, stl, 8mm_smooth_rod, 3d_printer, thingiverse,...
10
10.0
Apr 1, 2021
04/21
by
(Petrus)
data
eye 10
favorite 0
comment 0
Printed in ABS with 0.2mm layers height. W/T : 2.5 The balls are 1/8" (3.175mm) steel balls I salvaged from old bikes when I was a kid, we can source them in bike parts stores. A complete bearing uses 88 balls. The different pieces are drawn in google sketchup but the boolean operations are made with blender after a conversion to .stl The "springs" put some pressure on the bearing and compensate an eventual wear. The spikes in the spring fit inside small holes printed on the...
Topics: thingiverse, Printable Bearing, bearing, linear bearing, Other, stl
4
4.0
Mar 20, 2021
03/21
by
le ducminh (ducminh0)
data
eye 4
favorite 0
comment 0
Size: 1.5 x 1.5 x 2.4 cm You can use it like LM8UU bearing, i still use it for my graber i3. I think it good, you can try it.
Topics: lm8uu, thingiverse, linear_bearing, 3D Printer Parts, stl
12
12
Jan 18, 2021
01/21
by
Greg Cunningham (CuriousTech)
data
eye 12
favorite 0
comment 0
Use the original for printing and assembly instructions. This has only a few minor experimental changes. The washers are all replaced with shoulders on the models, and a flex area is used instead of springs. This reduces tolerance though, so they need to fit almost perfect, and probably won't without some tweaking. They're quieter than linear bearings or even the IGUS bushings with the right bearings, and horrible with cheap ones. N.b. As per discussion, the rods are bent due to the holdowns,...
Topics: 3D Printer Parts, lm8uu, thingiverse, linear_bearing, stl
4
4.0
Mar 20, 2021
03/21
by
Max Miller (irondmax)
data
eye 4
favorite 0
comment 0
this is a housing for the short linear bearing used for most 3D printer tables. it can be a direct replacement for the aluminum housed linear bearing and will last for a long time. the linear bearing simply snaps into place and will not rotate in the housing. this is part of my improved rep rap project, with no zipties. this is also a complete remake and upgrade of my QU-BD TWO UP the new printer will be called the RAPTOR zero ziptie, 3D printer, the project will be on my forum...
Topics: stl, 3D Printer Parts, linear_bearing, housing, thingiverse
7
7.0
Mar 16, 2021
03/21
by
Miroslav Kováčik (MiregSan)
data
eye 7
favorite 0
comment 0
EN Simple linear bearing with housing, sliding surface is made of PTFE tube. PTFE, ie polytetrafluoroethylene or teflon, has very low adhesion and is therefore very suitable for this purpose. Attach the two bearing halves to each other, the tubes will be closed inside. I changed the screws to M3 for easy handling. Also included a 3D model for adjusting the dimensions. CZ Jednoduché lineární ložisko s domečkem, kde kluzný povrch tvoří vložená PTFE trubička. PTFE čili...
Topics: linear_bearing, 3D Printer Parts, PTFE, stl, thingiverse
2
2.0
Jul 22, 2021
07/21
by
George Perakis (proliferate68)
data
eye 2
favorite 0
comment 0
Simple but very precise, according to stadards, housing base for 12 mm (ID) linear bronze-graphite bearing. Can fit exactly to aluminium extrusion profiles with T-nuts. 30mm center to center of screw holes, 15mm bottom to center ob bearing hole.
Topics: 3D Printer Parts, thingiverse, Linear_Bearing_Mount, stl
9
9.0
Apr 28, 2021
04/21
by
Josh M (SaturnFab)
data
eye 9
favorite 0
comment 0
An **experimental** 3D printable linear bearing that uses circular slides to *(in theory)* reduce surface area and friction. This type of bearing *(in theory)* should show equal performance of 3D printed linear fin bearings while lasting longer and being able to bear more weight. Use the customizer to match your own size bearing. The photos show a standard size LM8UU bearing using four sliders. I have not tested the effects of the number and radius of the sliders, it would be awesome if someone...
Topics: thingiverse, bearing, linear_bearing, linear_bearings, stl, Parts
7
7.0
Jan 20, 2021
01/21
by
Frank Townsend (Inamo)
data
eye 7
favorite 0
comment 0
Remix to make it an LM8SUU (17mm long).
Topics: 3D Printer Parts, thingiverse, linear_bearing, LM8SUU, stl
