5
5.0
Jan 7, 2021
01/21
by
Matthias Werner (matze79)
data
eye 5
favorite 0
comment 0
Raspberry Pi 400 MicroHDMI Protector Prevents defective MicroHDMI Port, by supporting Adapters.
Topics: stl, microhdmi protector, Computer, Raspberry Pi 400, Raspberry_Pi, raspberry 400, thingiverse,...
5
5.0
Mar 9, 2021
03/21
by
Lars Ivar Haave (Larsih)
data
eye 5
favorite 0
comment 0
Modified back trap door with RJ45 and Micro HDMI slots. Used on Amiga 1200 with a Vampire 1200 accelerator. Screws: Two M2x5mm for the hdmi, One M2x10mm for the RJ45 Used togehter with a 20cm Micro HDMI socket Female - HDMI Male adapter Cable
Topics: microhdmi, stl, thingiverse, A1200, Amiga_1200, rj45, Amiga, Computer, HDMI, amiga1200, micro
3
3.0
Jan 7, 2021
01/21
by
Matthias Werner (matze79)
data
eye 3
favorite 0
comment 0
Raspberry Pi 400 MicroHDMI Protecter As you know HDMI Adapters are strong levelers and will quickly rip off the MicroHDMI Connector from your PCB. This Adapter gives some Level of Protection to prevent too much Force on the MicroHDMI Connector of the Pi 400. Best printed from PETG. 0.12mm, 30% infill
Topics: Raspi 400 hdmi, stl, Computer, Raspberry_Pi, thingiverse, Raspberry 400, microhdmi, Raspi 400
10
10.0
Jan 4, 2021
01/21
by
Lars Ivar Haave (Larsih)
data
eye 10
favorite 0
comment 0
Needed a little tidier handling of all the cables that I have connected internally in my amiga 500. I have have a Vampire accelerator, and needed somewhere to put the hdmi, network and sd card holder. In addition, I have a switch to change the dfo / df1 disk drive. So i modeled this little thing. Print the three pieces (Addon, ExpansionPort and bottom lid) and assemble it with som screws: * Two M2x10 mm screws to connect the box with the expansion door * Two M2x6 mm screws for the microhdmi *...
Topics: stl, sdcard, Computer, Apollo, vampire, switch, Network, Amiga_500, Amiga, rj45, thingiverse,...
10
10.0
Jan 19, 2021
01/21
by
Philippe PERRIN (pper)
data
eye 10
favorite 0
comment 0
I love my lenovo Yoga 710 but microHDMI connector. It's a horible format for HDMI. HDMI cable are too weight for this tiny tiny connector. I broke many cables and micro-hdmi/HDMI adaptators !!! Now, i buy little "cheap" adaptators but i'm affraid to brake on day computer connector. So i design a protection for my micro-hdmi/hdmi adaptator (buy in physical shop but same [that one on amazon](http://a.co/aZJDunO/). This "box" protect (as possible !) my microHDMI adaptator from...
Topics: Lenovo, yoga 710, HDMI-D, micro hdmi, thingiverse, HDMI D, micro-hdmi, microhdmi, Computer, stl
5
5.0
Mar 18, 2021
03/21
by
Lars Ivar Haave (Larsih)
data
eye 5
favorite 0
comment 0
Modified back trap door with slots for MicroHDMI/HDMI and RJ45. Also made an opening for pulling a microsd extension out of the computer (Micro SD Memory Card Slot to TF Card Extender Cable Extension) If you use the HDMI version, you must screw on the top screw after the trap door is put in place. Recommended (micro)hdmi cable lenght is 20 cm. Screws: Two M2x5mm for the HDMI, One M2x10mm for the ENC28J60 Ethernet Module LAN Used on Amiga 1200 with a Vampire 1200 accelerator. Use it together...
Topics: vampire, a1200, Computer, Commodore_Amiga, Amiga_1200, micro_SD, stl, thingiverse, HDMI,...
