2
2.0
Apr 24, 2021
04/21
by
Jonne Backhaus (sts_fin)
data
eye 2
favorite 0
comment 0
Got annoyed that even with the slightest bump i got cracks in the "engine heatshield". So i added some thickness to it.
Topics: OpenRC_Tesla, stl, R/C Vehicles, thingiverse, OpenRC_F1, openrc
2
2.0
Mar 19, 2021
03/21
by
Jonne Backhaus (sts_fin)
data
eye 2
favorite 0
comment 0
Remix of the Yet another OpenRC F1 electronics holder that adds channels for the ESC and Servo cables under the holder to make cable managemet a tad more tidier. Removes the "wing" from the original since this was made for the Openrc F1 Tesla Cybertruck in mind. I Used 3m doublesided installation tape to attach it to the chasis. Prints without supports
Topics: OpenRC Tesla, OpenRC CyberTruck, OpenRC_F1, OpenRCproject, openrc, thingiverse, Toy & Game...
2
2.0
Apr 27, 2021
04/21
by
Vegard Figenschou (The-eh)
data
eye 2
favorite 0
comment 0
Replacement "glass" for the Rain Light with 3x5 holes. Fits prikrylmarek Modified rain light
Topics: thingiverse, Vehicles, stl, OpenRC_F1, openrc
3
3.0
Apr 20, 2021
04/21
by
(Suprafan123)
data
eye 3
favorite 0
comment 0
Disclaimer: I am still working on this and will update the files as I see fit. I am working on updating this post with the most recent iterations of the pulley system. I will add the most recent iterations soon when I finish testing them. I have modified the belt so it is now smaller and more durable when printed from TPU. It is a tight fit but it runs well and it should not strip. I recommend printing spare pinions because the teeth do wear away after heavy use. Print extra belts too. They...
Topics: thingiverse, OpenRCproject, stl, R/C Vehicles, openrc mods, OpenRC_F1, openrc, f1 car, openrc parts
3
3.0
Apr 5, 2021
04/21
by
Jonne Backhaus (sts_fin)
data
eye 3
favorite 0
comment 0
Since the original version backrims had a desing snafu I did not like, I made the remix so these the original locknut and the the screw goes fully in to the axle. Dont look as pretty or faithful to the real cybertruck rims, but these work better.
Topics: thingiverse, OpenRC Cybertruck, OpenRC_F1, openrc, stl, Toy & Game Accessories, OpenRCproject
7
7.0
Apr 16, 2021
04/21
by
Luis Diaz (LuisDUgena)
data
eye 7
favorite 0
comment 0
A modified version of the real axle holder (right) and pinion gear to fit Propodrive 28-36s 2200kv motor.
Topics: openrc, OpenRC_F1, thingiverse, stl, Automotive
6
6.0
Jan 19, 2021
01/21
by
(yannickraw)
data
eye 6
favorite 0
comment 0
This will fit the original F1 not the 2017 update. That's why I included the F360 file ...for you to update it. Please give me credit if you do so
Topics: thingiverse, OpenRC_F1, openrc, 3D Printing, stl
3
3.0
Apr 5, 2021
04/21
by
Jozef Mašek (yolozef)
data
eye 3
favorite 0
comment 0
Topics: thingiverse, OpenRC_Truggy, 3D Printing, openrc, stl
2
2.0
Apr 24, 2021
04/21
by
Jonne Backhaus (sts_fin)
data
eye 2
favorite 0
comment 0
Added clearance in the frame for the pinion and the suspension to move and added wheelwells for clearance in the truckbed. PSA! YOU REALLY NEED THE TRUCKBED, if you dont use it you might damage the wheels/motor/chassis of your car, even with tpu tires the original Bed printed in PLA melted when the TPU tires hit the chassis PSA! Two things to consider 1: weight if you are one of those that have 100% infil frames on their truck, you probably have to reprint the frame and the chassis in 7-15%...
Topics: OpenRCproject, OpenRC_Tesla, stl, R/C Vehicles, thingiverse, OpenRC_F1, openrc
43
43
software
eye 43
favorite 0
comment 0
https://wiki.hyperbola.info/
Topics: openrc, linux
Source: torrent:urn:sha1:5684e8ea2917db14c4d6436e986338bb0377090a
2
2.0
Mar 16, 2021
03/21
by
Jesper Ebbesen Sørensen (jes880)
data
eye 2
favorite 0
comment 0
For Open Tractor
Topics: thingiverse, OpenRc tractor, openrc, stl, tractor, Vehicles
5
5.0
Mar 17, 2021
03/21
by
Francis De Brabandere (francisdb)
data
eye 5
favorite 0
comment 0
Just filled the two unused holes to make it stronger. Print this in PETG to make it a list less brittle.
Topics: OpenRC_F1, Toys & Games, stl, openrc, thingiverse
10
10.0
Jan 10, 2021
01/21
by
Drazen (Drazen)
data
eye 10
favorite 0
comment 0
This is a slightly remixed engine cover. It adds a little clearance in a few places to allow rear suspension movement. My motor has large pins for cables to be soldered on. To clear these pins I had to thin out a section of the motor cover.
Topics: R/C Vehicles, thingiverse, OpenRC_F1, stl, openrc
3
3.0
Mar 22, 2021
03/21
by
tim geil (xmp)
data
eye 3
favorite 0
comment 0
Center diff housing for metal differential from amazon: https://www.amazon.de/dp/B07L8YC8NG/ref=cm_sw_em_r_mt_dp_U_Kfc.Cb70402FD
Topics: stl, R/C Vehicles, OpenRC_Truggy, thingiverse, openrc
3
3.0
Jan 4, 2021
01/21
by
(projunk)
data
eye 3
favorite 0
comment 0
OpenRC Parametric Chinook. This is a parametric version of Tom Stanton's Chinook design. Be aware: I have not yet programmed the flight controller, so I cannot guarantee yet that the Chinook will fly properly. Required printed parts: - BackWheelHolder (2x) (or BackWheelHolderFB) - FrontWheelHolder (2x) (or FrontWheelHolderFB) - Tire (6x) - Rim (2x) - RimWithScrewHeadHole (4x) - FCMount (1x) - FlangeBearingBracket (2x) - InterMidCorner (1x) - LeftCorner (1x) - RightCorner (1x) - MotorMount (2x)...
Topics: stl, chinook, Vehicles, openrc, thingiverse, parametric, OpenRC_F1
4
4.0
Mar 17, 2021
03/21
by
isaiah porter (Ict890)
data
eye 4
favorite 0
comment 0
Made for a smaller motor and larger servo
Topics: OpenRC_F1, stl, openrc, thingiverse, R/C Vehicles
2
2.0
Jun 11, 2021
06/21
by
Stephan Kempa (Dustpuppy)
data
eye 2
favorite 0
comment 0
I use this mold for making tires for my RaceRod and my F1 car. Mix 60gr of clear silicon from building supplier with 25gr of corn flour. Put two lids on the rim. Use two small ones for the rear tire and a small and big one for the front tire. Apply the mixture into the mold and on the rim. Take care, that the rim is fully covert and the silicon is pressed into the holes. At last put the rim with the lids into the mold, with the slots in the lids between both halfs of the mold, for better...
Topics: thingiverse, openrc, OpenRC_F1, R/C Vehicles, stl
6
6.0
Jan 19, 2021
01/21
by
Claus Jander (Dark-Hawk)
data
eye 6
favorite 0
comment 0
Turns out the original Rear Chassis OpenRC F1 (pre 2017 version) is a tiny bit to close to the tire when using Tamiya F104 tires. When you race the car the tires hit the chassis which does harm to the tire and the chassis as well, so I optimized the chassis giving the tires a tiny bit more space.
Topics: thingiverse, R/C Vehicles, OpenRC_F1, openrc, stl
7
7.0
Mar 12, 2021
03/21
by
Drazen (Drazen)
data
eye 7
favorite 0
comment 0
This is a modified OpenRC F1 Front chassis. -added feature for s-duct similar to many 2017 cars (use with my modified nose) -added mount for mid-nose 'winglet' similar to 2017 Ferrari or Mclaren -increased clearance for front suspension movement -increased clearance for servo arm Update 3/5/17: Added new model for sidepods. These have increased clearance for the battery and allows you to move he battery forward 5mm or so. Also has a little opening in the side to allow a wire to pass through. I...
Topics: thingiverse, R/C Vehicles, OpenRC_F1, openrc, stl
8
8.0
Jan 11, 2021
01/21
by
Drazen (Drazen)
data
eye 8
favorite 0
comment 0
This is a rear suspension pivot that uses bolts instead of plastic from the original design. It also makes the pivot and spring holder a single component. You'll need some m3 bolts 8mm or longer, as well as a little bushing for each side. I happened to have the correct bushing size so I did not model this... You could get away with using a bit of tape rather than a bushing if needed.
Topics: R/C Vehicles, thingiverse, OpenRC_F1, stl, openrc
6
6.0
Apr 18, 2021
04/21
by
Chris Mitchell (intoxikated)
data
eye 6
favorite 0
comment 0
OpenRC F1 Front Independent Suspension Mod! Fully 3d printed. Nothing more than regular screws and 2 springs needed. No expensive RC linkages, no fancy geometry, just plain and simple suspension that's able to be tuned slightly. This mod works best together with Rhoagland's rear suspension mod https://www.thingiverse.com/thing:1455132 Please read the Parts List.RTF file for complete installation and hardware list! https://www.youtube.com/watch?v=5iu81XrTQSs https://youtu.be/2-gtcRhlcxo Update:...
Topics: openrc, OpenRC_F1, thingiverse, stl, R/C Vehicles
9
9.0
Jan 14, 2021
01/21
by
Stan Kersten (Staker)
data
eye 9
favorite 0
comment 0
I noticed while I was driving the amazig F1 car that my electronics ran verr hot because the lack of airflow over them. so I desinged this air vent to cool them down a little bit. V2 update has got a more trapezoid shape for better airflow and looks better
Topics: 3D Printing, thingiverse, OpenRC_F1, stl, openrc
1
1.0
Apr 24, 2021
04/21
by
Jonne Backhaus (sts_fin)
data
eye 1
favorite 0
comment 0
Remix of Timebandit91's Yet another OpenRC F1 electronics holder for ITF's OpenRC F1 Tesla CyberTruck body fitted with Rhoagland's OpenRC F1 Rear suspension... WHOA WHAT A MOUTH FULL :D Since the rear suspension took away a lot of space so i could not use the remixed version I had made for it. I also wanted to shift the weight a tad more to the front so the suspension has less weight to worry about. The holder mounts to the block i created with two 8 or 10mm M3 screws and two m3 nuts the block...
Topics: suspension, OpenRCproject, OpenRC_Tesla, stl, R/C Vehicles, thingiverse, OpenRC_F1, openrc
3
3.0
Mar 10, 2021
03/21
by
Patrick (timebandit91)
data
eye 3
favorite 0
comment 0
This is an addition to the Differential from tahustvedt found here: https://www.thingiverse.com/thing:2361718 To use the differential you need to print a front rim. Unfortunately the rims are in different sizes if you use F104 tires. So I modified an original F104 rear rim to fit to the differential. Simply print one modified rim (download my remix) and one original F104 rear rim. The modified one will be the one on the right side.
Topics: R/C Vehicles, stl, thingiverse, openrc, OpenRC_F1
2
2.0
Jun 11, 2021
06/21
by
Stephan Kempa (Dustpuppy)
data
eye 2
favorite 0
comment 0
A mold to make silicon tires for the OpenRC F1 car. Rims are taken from here: https://www.thingiverse.com/thing:2625567 I use 60gr of clear silicon and 30gr of corn flour for the tires.
Topics: thingiverse, openrc, OpenRC_F1, R/C Vehicles, stl
3
3.0
Mar 15, 2021
03/21
by
Michel Kraaij - van den Berg (W0kk3L)
data
eye 3
favorite 0
comment 0
This is a remix from https://www.thingiverse.com/thing:398515 The original tires were too large for my Tarmo4 RC, so i scaled them down. Original tire size: +/- 123mm New tire size: +/-100mm I scaled down both the tire and the rim and then resized the holes for the bolts and the slots for the nuts back to normal (m3 bolts/buts for the rim, m4 bolt for the axle and a 12mm hex for the axle). The nuts are een tight fit. Squeeze them in with pliers and they will never fall out ;-) In addition the...
Topics: thingiverse, OpenRC_Truggy, R/C Vehicles, openrc, stl
5
5.0
Mar 3, 2021
03/21
by
Tim Roos (TIRO1985)
data
eye 5
favorite 0
comment 0
Workstand for the open rc F1 1/28 scale https://www.thingiverse.com/thing:2816828
Topics: openrc, thingiverse, OpenRC_F1, stl, scale_model, Hobby
3
3.0
Mar 9, 2021
03/21
by
nick lindenmuth (nicklindenmuth)
data
eye 3
favorite 0
comment 0
something a made up a while ago but ive never tested. its meant to have a very low kv 2205 motor bolt directly to the rims.
Topics: stl, thingiverse, 2205, openrc, OpenRC_F1, Toys & Games
7
7.0
Apr 17, 2021
04/21
by
(yannickraw)
data
eye 7
favorite 0
comment 0
***Work in progress*** mirror it to get the other side.
Topics: openrc, OpenRC_F1, thingiverse, stl, R/C Vehicles
3
3.0
Mar 19, 2021
03/21
by
Laszlo Szekeres (szeker)
data
eye 3
favorite 0
comment 0
A more durable and more crash-resistant OpenRC F1 front wing design, which is compatible with the original nose section. Flexible fixations are absorbing the energy of the impact (on some level) and let the wing moving during a crash. Tested on the field (on an R/C race track) by my kids - with good results. No damage on the front part. (Before the upgrade I have to glue back the front wing pieces many-many times...) There are 3 main components: 1.) Modified front wing (reinforced and modified...
Topics: R/C Vehicles, OpenRC_F1, openrc, thingiverse, stl
6
6.0
Jan 20, 2021
01/21
by
Patrik Möller (SSwede)
data
eye 6
favorite 0
comment 0
This is a 3d model of the OpenRC logo, I haven't made the logo, just the 3d model and I'm uploading it by request. Feel free to use it anyway you like :)
Topics: thingiverse, OpenRC_F1, R/C Vehicles, openrc, stl, OpenRCproject
2
2.0
Jan 5, 2021
01/21
by
JAMES WISNIEWSKI (jameswisnie)
data
eye 2
favorite 0
comment 0
8/31 Removed v2 and uploaded V3, added 35 & 45 MM piston rod EXPERIMENTAL PARTS SUBJECT TO CHANGE! One of the biggest weaknesses in the RC world in terms of handling is the camber changes experienced when the vehicle is in motion, I have taken steps to correct that. These are spring loaded variable length upper control arms that will help maintain camber when turning and driving conditions which will aid in roll over situations as the tire will maintain proper camber Print is slightly...
Topics: R/C Vehicles, OpenRC, stl, OpenRC_Truggy, thingiverse, Camber,
2
2.0
Jan 5, 2021
01/21
by
Shane Jamerson (jamerson90)
data
eye 2
favorite 0
comment 0
The 3D printed pinion gear for the Open RC F1 was the weak part of the design. Immediately after printing I found that it spun the flat spot in the print. When looking for a new pinion gear it looked like the stock was a 24dp 14T pinion for a 40T spur. I could not easily find a replacement 24dp metal gear on amazon, but it looked like 32dp and 48dp was common for Traxxas RC cars and fit the shaft on the 540 motor spec'd out by Daniel. My solution was to model a 32dp 57T spur gear as a direct...
Topics: R/C Vehicles, stl, openrc, Gear, thingiverse, OpenRC_F1
6
6.0
Apr 17, 2021
04/21
by
Daniel Soares (dnlsrs)
data
eye 6
favorite 0
comment 0
I added a simple servo linkage lock. With this, you can use the original servo saver or the new servo linkage. Use two socket head screws (M3x8) to hold all pieces. One on top of the linkage and the other one on the existing servo holder
Topics: openrc, OpenRC_F1, thingiverse, stl, R/C Vehicles, OpenRCproject
2
2.0
Apr 27, 2021
04/21
by
Andreas Mächler (am3ddruck)
data
eye 2
favorite 0
comment 0
Ein zusätzliches Felgendesign nach dem Vorbild von Palmiga.
Topics: thingiverse, stl, OpenRC_F1, R/C Vehicles, openrc
3
3.0
Apr 30, 2021
04/21
by
RAFAEL CARDOSO (Curio_sentinela)
data
eye 3
favorite 0
comment 0
This is a pinion for GT2 closed belt to use at the openrc Go_kart https://www.thingiverse.com/thing:3859251
Topics: stl, Vehicles, OpenRC_F1, thingiverse, openrc go-kart
3
3.0
Apr 20, 2021
04/21
by
Jonne Backhaus (sts_fin)
data
eye 3
favorite 0
comment 0
MMU remix of the Rainlight+diffuser part Like the original part, has to be printed backside laying down. Every dot is a colorable entity so if you like to do something fancy with your multicolor printer / MMU you can go for it :) Should be printed at 0.15 or 0.1 layerheight because of the dots (lower works too but its unnessesary, I printed mine at 0.15). Original design by Daniel Norée / OpenRC
Topics: thingiverse, stl, R/C Vehicles, OpenRC_F1, openrc
2
2.0
Apr 13, 2021
04/21
by
Jonne Backhaus (sts_fin)
data
eye 2
favorite 0
comment 0
Since I wanted to keep my colorscheme I remixed the dual extrusion front part to have enough clearance to work with the TPU front suspension. Also I like the retrolook so I didnt want to use the newer single color desing thats included in the model
Topics: thingiverse, OpenRCproject, openrc, stl, Toys & Games, OpenRC_F1
10
10.0
Jan 11, 2021
01/21
by
Drazen (Drazen)
data
eye 10
favorite 0
comment 0
This is a rear axle that fits openrc F1 2017. I made the holes used to mount the wheels larger to accept a #8 threaded rod. The hole runs the full length of the axle. Use a drill to help thread the rod into the axle.
Topics: R/C Vehicles, thingiverse, OpenRC_F1, stl, openrc
7
7.0
Jan 14, 2021
01/21
by
joshua sloat (jsloat31)
data
eye 7
favorite 0
comment 0
This is the rear axle with a 3mm hole through it for a threaded rod. I made this to stop my axle from snapping. It is good for anyone with high torque motors. I secured the wheels with the 3mm nuts that are used for the build. I did use the printed wheel lock nuts for added support.
Topics: R/C Vehicles, thingiverse, OpenRC_F1, stl, openrc
2
2.0
Apr 23, 2021
04/21
by
Jonne Backhaus (sts_fin)
data
eye 2
favorite 0
comment 0
remixed the rear chassis to have the added clearance for Tamiya tires.
Topics: OpenRCproject, stl, R/C Vehicles, thingiverse, OpenRC_F1, openrc
6
6.0
Jan 19, 2021
01/21
by
Chris Mitchell (intoxikated)
data
eye 6
favorite 0
comment 0
!!!WARNING!!! This is an untested mod! https://youtu.be/3fYqZU2aIYg This mod is to bring the gear ratio down a bit and to put all the moving parts inside of the RC body to protect the gears. All parts on the list are replacements to originals. Reused unmodified parts: rear_wheel_axle Wheel_axle_holder_left* rear_wing rainlight_and_diffuser *Mirror for right side Parts required: 2 18x12x4 bearings various m3 and m4 screws and nuts, I have not determined what lengths yet Same motor and...
Topics: thingiverse, gearbox, OpenRC_F1, R/C Vehicles, openrc, stl
7
7.0
Jan 20, 2021
01/21
by
Ben Yarmis (diabeetusman)
data
eye 7
favorite 0
comment 0
Accidentally ordered a servo motor that was bigger than the one that the stock OpenRC F1 holder is designed for. Instead of ordering more servos, I designed a new holder! Fits my servo perfectly, not sure about all servos of this size though. Use M3x8 countersunk screws coming up from the bottom, directly into the plastic. There wasn't enough room to include captive nuts without putting them above the servo and requiring stupidly long screws that I didn't have.
Topics: servo, thingiverse, OpenRC_F1, R/C Vehicles, openrc, stl
2
2.0
Mar 16, 2021
03/21
by
Darren Horrocks (bizzehdee)
data
eye 2
favorite 0
comment 0
OpenRC F1 Wheel Rims for eBay bought low profile 10:1 tires. https://www.ebay.co.uk/itm/1-10-On-Road-Car-Tire-Wheel-Rims-For-RC-HSP-HPI-CC01-TT01-Flat-Racing-4Pcs/402536472722 Tire OD: 64mm. Tire ID/Rim OD: 52mm. Tire/Rim Width: 26mm Remixed from the original OpenRC F1 rims
Topics: thingiverse, OpenRC_F1, R/C Vehicles, openrc, stl
6
6.0
Jan 15, 2021
01/21
by
joshua sloat (jsloat31)
data
eye 6
favorite 0
comment 0
This rim has been modified to allow the differential to be ran on the 2017 OpenRC F1 car. I wont say it is perfect as I did have to sand a few surfaces, not sure if its my printer or the actual design. Tell me what you think!
Topics: R/C Vehicles, thingiverse, OpenRC_F1, stl, openrc
5
5.0
Mar 16, 2021
03/21
by
Maximilian Bischof (Auefan)
data
eye 5
favorite 0
comment 0
I had to redesign the rear axle from the motormod for the tractor. You can use the original bearings and gears from the motormod for the tractor. I used this wheels from Amazon: https://www.amazon.de/gp/product/B00AFN6V8W/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 After printing you have to cut 2 M3 into every side of the axle to mount the wheels to the axle.
Topics: openrc_tractor, motormod, stl, openrc, thingiverse, OpenRCproject, Mechanical Toys
7
7.0
Mar 12, 2021
03/21
by
Drazen (Drazen)
data
eye 7
favorite 0
comment 0
This is a remix of the 2017 wings that Daniel uploaded over on Pinshape. I took his files and made some customization. They match the general design of the 2017 cars. Wider wings and more aggressive sweep. Rear wing: Added some strength at the mounting point Front Wing: Added some strength where mine break, also modified to mount using the design raab6 uploaded. I haven't printed these yet! I'm confident they will work fine- but I haven't had the time/material ready to make them Update 2/26/17:...
Topics: thingiverse, OpenRCproject, R/C Vehicles, OpenRC_F1, openrc, stl
2
2.0
Mar 25, 2021
03/21
by
3dPrint ItAll (3dPrint_ItAll)
data
eye 2
favorite 0
comment 0
Big fan of the OpenRC tractor. I kept burning up gears due to the drive gear sliding off the motor shaft. My fix was to extrude the load gears retaining ring to meet the back of the wheel, keeping it fixed in place. Next I changed to a herringbone gear to help the drive gear stay in its place. It seems to be working for me, I hope this helps someone.
Topics: stl, R/C Vehicles, openrc_tractor, thingiverse, openrc, herringbone
1
1.0
Jul 25, 2021
07/21
by
Jacob Shanahan (Jokey)
data
eye 1
favorite 0
comment 0
Pinion gear for OpenRC F1 car. The sides on the gear keep it from slipping off the motor shaft. Printed using PLA with %100 infill for rigidity.
Topics: openrc, thingiverse, R/C Vehicles, OpenRC_F1, stl, OpenRCproject
7
7.0
Jan 17, 2021
01/21
by
Stan Kersten (Staker)
data
eye 7
favorite 0
comment 0
Hi Daniel made a Active front wing wit some slots cut out under a 6degree angle upwerds hope you like it
Topics: front_wing, thingiverse, OpenRC_F1, openrc, 3D Printing, stl
