5
5.0
Mar 5, 2021
03/21
by
Thomas Malkewitz (tomohulk)
data
eye 5
favorite 0
comment 0
This will allow you to hook liquid lines together for cleaning. just need o rings. #10 facet o rings from your local hardware should work.
Topics: DIY, stl, homebrew, keg, pinlock, thingiverse
4
4.0
Apr 2, 2021
04/21
by
Jakub Koper (Koperfield27)
data
eye 4
favorite 0
comment 0
Hi. I create simple egg shaped pinlocks pin. 5mm wide
Topics: Sport & Outdoors, thingiverse, pinlock, motorcycle, helmet, stl
10
10.0
Jan 18, 2021
01/21
by
Alex (barrooze)
data
eye 10
favorite 0
comment 0
This is an adapter for a pinlock quick disconnect (QD) for a 5 gallon pinlock keg to a 1/2" barb fitting. This adapter will allow you to connect a pinlock QD to a submersible pump to aid in beer line cleaning. Due to the twisting nature when locking these QDs, I added an oblong portion to help you turn the adapter onto the QD. Once you print, all you need to do is add an o-ring and you're all set to use it! The idea for this came from the @NeoPlane Ball Lock keg adapter, then the 1-piece...
Topics: Homebrew, Homebrewing, thingiverse, kegging, DIY, Keg, Pinlock, stl
9
9.0
Apr 30, 2021
04/21
by
Tobias Adler (T0bs)
data
eye 9
favorite 0
comment 0
The AGV Pista GP helmet I bought did not have clips for a pinlock on it. There is a mount for it but they do not sell separately so I have to buy a new visor.. or print my own clips! Printed with support, 20 micron layer height in ABS. I used an 8mm philips screw (1.5mm wide) to fasten the clips.
Topics: stl, Vehicles, pinlock, helmet, clip, thingiverse, pista, agv
2
2.0
Apr 19, 2022
04/22
by
Rémi Santos (RDSpt)
data
eye 2
favorite 0
comment 0
I modeled these pin using the Originals from my helmet. Print with the smallest resolution your printer allows. Print outside.stl sideways to increase strength.
Topics: motorcycle, thingiverse, Automotive, Airoh, helmet, pin, bike, stl, pinlock
3
3.0
Mar 22, 2021
03/21
by
Dänüs Mäzor (elHomomomo)
data
eye 3
favorite 0
comment 0
This is a Pinlock for a HJC RPHA 70 Could fit for other HJC helmets too.This is the part inside the helmet which holds the pinlock visor. Very small part. Print without supports. I printed it with 0.3mm nozzle and 0.08mm layer height. Recommend PETG
Topics: HJC, PIN LOCK, stl, PIN, visor, pinlock, helmet, RPHA, Automotive, HJC RPHA 70, thingiverse
6
6.0
Jan 21, 2021
01/21
by
Giedrius Slavickas (Zhiniukas)
data
eye 6
favorite 0
comment 0
Adapter for counter pressure bottle filler for use with flip top bottles. Bottle tap mus be removed before filling. One hole with M6 thread is for fixing bolt. Others done for screwing long bolt as a handle. Test showed it is not requred.
Topics: Filler, kegerator, Outdoor & Garden, keg, thingiverse, picnic, pinlock, beer, fliptop, tap,...
