5
5.0
Jan 9, 2021
01/21
by
Gabriel Smith (Gladiator37)
data
eye 5
favorite 0
comment 0
I shortened the version of the CCG Geared Card Box V2 for a standard deck of playing cards. I am unaware if the original design is still on thingiverse, because I couldn't find it. This is the one I found on prusiaprinters. ( https://www.prusaprinters.org/prints/2402-ccg-geared-card-box-v2-magnetic-latch )
Topics: thingiverse, Playing_Card_Holder, 3D Printing, stl
8
8.0
Jan 17, 2021
01/21
by
Scott Hector (Mr_Terasaur)
data
eye 8
favorite 0
comment 0
My folks and I play a game with 6 decks and a discard pile that usually goes up to 100 or so cards. I needed something they could easily remove cards from and put into. So I designed this holder. It makes it very easy to remove 1 or 100 cards. It is also very handy as a partial storage for the cards when we are not using them. I created other deck holders with finger grips for the rest of the cards that fit into a box very nicely. As with all my items, it is not required, but a tip through...
Topics: Toys & Games, playing_card_holder, stl, thingiverse
10
10.0
Jan 18, 2021
01/21
by
Alexandre St-Charles (Mayalecabot)
data
eye 10
favorite 0
comment 0
This is a simple playing card holder with 2 sections. It can hold 3 packs per side. Ceci est un simple support pour carte à jouer avec 2 sections. Il peut contenir jusqu'à 3 paquets de cartes de chaque côté.
Topics: Toy & Game Accessories, Playing_Card_Holder, stl, thingiverse
3
3.0
Jun 11, 2021
06/21
by
Will Giff (NomadxActual)
data
eye 3
favorite 0
comment 0
designed to hold one deck of standard playing cards. this is the first model i made trying to learn how to design my own products!
Topics: playing_cards, thingiverse, 3D Printing, Playing_Card_Holder, stl
3
3.0
Jun 11, 2021
06/21
by
christian collins (SlightVolcano7)
data
eye 3
favorite 0
comment 0
Carrying case for playing cards. It is very practical and can fit in your pocket. This is still in the testing phase and has not been printed yet. Print with the hole in the box down for no supports needed. Designed with onshape. This will be updated when it has been printed. Any tips or questions? Comment on this design I am open to suggestions.
Topics: case, unique, thingiverse, Games, protective, Playing_Card_Holder, stl
5
5.0
Jan 16, 2021
01/21
by
Christian Bay (tdctaz)
data
eye 5
favorite 0
comment 0
This is a card storage insert for KleverCase Box File use in this case for Arkham Horror the Card Game with Flippers for the amazing Arkhamesque Horizontal Dividers by smallville247. You need to print one of each except two of the `Box - Left and Right.stl` and as many `Flipper.stl` as you need. Assembly is quite simple: - Remove the paper holder from the left side of the Klever Case - Glue `Cap - Left` and `Cap - Right` into the left and right side of the Case - Insert the remaning Boxes into...
Topics: Games, Arkham_Horror_LCG, thingiverse, Playing_Card_Holder, stl
10
10.0
Apr 30, 2021
04/21
by
Dennis Eriksson (zurox)
data
eye 10
favorite 0
comment 0
My Friend lost some foots for his RPG game so I designed and printed some for him, if it could help anyone else I'm glad :)
Topics: stl, Playing_Card_Holder, RPG_game, 3D Printer Accessories, thingiverse
6
6.0
Mar 17, 2021
03/21
by
Luwayne Crous (Luwayne)
data
eye 6
favorite 0
comment 0
This is a awesome playing card box with an tight fit lid.
Topics: card_holder, stl, thingiverse, Toy & Game Accessories, Playing_Card_Holder
2
2.0
Dec 1, 2021
12/21
by
Dorian Grey (DorianGrey)
data
eye 2
favorite 0
comment 0
Given the current state of Thingiverse, **Downloads broken, Thingview broken**, I recommend to visit the [thing on prusaPrinters](https://www.prusaprinters.org/prints/87144-uno-playing-cards-holder-uno-karten-etui) to check on it or download it. ___ You have 2 options with this, print the holder.stl and have an engraved 'UNO' or additionally print the deco.stl and glue it on top which allows you to print the UNO in a different color. The deco.stl is meant to be printed with 0.2mm and you can...
Topics: thingiverse, uno, Toy & Game Accessories, Playing_Card_Holder, stl, playing_cards
2
2.0
Apr 20, 2022
04/22
by
Guido Kimble (guido666)
data
eye 2
favorite 0
comment 0
A small storage box, with a window. I use it to keep some playing cards in, as well as another for ID/credit/gift cards. I designed this to look like the great example in this Filament Sample box (though mine does not actually use any of the original files from it): https://www.prusaprinters.org/prints/16322-filament-sample-with-box
Topics: thingiverse, playing_cards, Playing_Card_Holder, Storage_Box, storage, stl, Containers
3
3.0
Jan 8, 2021
01/21
by
Gabriele Baldassarre (TheClue)
data
eye 3
favorite 0
comment 0
This is a parametrized playing deck. Actual dimensions suit the italian playing cards standard deck in Napoletane pattern. On top, the ace of clubs is embossed.
Topics: Playing_Card_Holder, playing_card_box, stl, Toy & Game Accessories, thingiverse
6
6.0
Jun 21, 2021
06/21
by
Etienne Dupont (TiDup)
data
eye 6
favorite 0
comment 0
Modèle imprimée en 3D pour retenir toutes les cartes du jeu Gaïa. Rentre dans la boite de rangement en pliant le carton placé à l'intérieur.
Topics: Toy & Game Accessories, card_holder, thingiverse, Playing_Card_Holder, stl, gaia
7
7.0
Mar 16, 2021
03/21
by
Régis Guertin (BobyTheGreat)
data
eye 7
favorite 0
comment 0
Card holder for mini uno and monopoly decks. Both top and bottom can be screwed together with printed filets. There are also 2 holder to prevent cards from moving in the box.
Topics: uno, Monopoly, Monopoly_Game, Cards, stl, thingiverse, Games, Playing_Card_Holder
3
3.0
Jan 5, 2021
01/21
by
Keith Henson (Discotehk)
data
eye 3
favorite 0
comment 0
Simple holder to hold 6 cards. Right and Left arcs. I made it to hold my ability cards when playing Gloomhaven because there just isn't enough table.
Topics: Playing_Card_Holder, stl, Games, gloomhaven, thingiverse, card_holder, playing_cards
9
9.0
Jan 17, 2021
01/21
by
Matt Fritz (mfritz)
data
eye 9
favorite 0
comment 0
Modified version of pauloblank's Business Card Holder https://www.thingiverse.com/thing:1003538 Widened to fit standard sized playing cards (3.5" x 2.5"). Room for 30 cards in the container with a lid that fits snugly. There is a blank top and one with a cougar head on it. The school is starting a reward program in which the students can earn cards that can be turned in for rewards and they need a holder for the cards.
Topics: Playing Card Holder, thingiverse, Containter, Containers, Playing Card, Card, stl, Holder
8
8.0
Jan 15, 2021
01/21
by
Ken Anderson (kidtire)
data
eye 8
favorite 0
comment 0
I wanted a way to store playing cards that wasn't the cardboard boxes from the store. So, I made these and they are working great. There are generally two basic sizes of playing cards. One is called "Bridge" or "narrow" and is 2.25" x 3.5". The other is called "Poker" or "wide" and is 2.5" x 3.5". Most poker rooms in USA use Bridge sized cards to play poker. So, I don't know how the names got mixed up. Different players prefer...
Topics: thingiverse, poker, stl, playing_cards, Playing_Card_Holder, Toy & Game Accessories
3
3.0
Apr 1, 2021
04/21
by
Darrell Black (Gigahacker)
data
eye 3
favorite 0
comment 0
This is a Playing Card Holder for Discards when playing games with large discard piles. Example: Hand & Foot
Topics: playing_cards, thingiverse, card, Cards, Toy & Game Accessories, Playing_Card_Holder, stl
3
3.0
Jan 6, 2021
01/21
by
Sven Steinert (sharkymoto)
data
eye 3
favorite 0
comment 0
**Box for a Pokerdeck** Designed to accomodate a Deck that measures 20x58x90mm with a 1mm gap. The Topcap locks in place so your cards are securely stored.
Topics: Playing_Card_Holder, poker, Toys & Games, stl, deck, thingiverse, card, deck_box
5
5.0
Mar 17, 2021
03/21
by
Charles Watson (Heref)
data
eye 5
favorite 0
comment 0
Need something to hold your hand of Pokemon cards? Maybe your five year old has trouble holding his hand of cards? Maybe the both of you want to eat some yummy cheese frys while keeping those cards clean? This holder is for you! It is designed to hold the cards, and not be knocked over easily. Yes, this one is designed to hold a six card hand, but you can stack about six cards behind each place. So line up your energies, put your stage 1s behind your appropriate basics. Oh and No Supports...
Topics: playing_cards, Toys & Games, pokemon, card_holder, stl, thingiverse, Playing_Card_Holder
7
7.0
Apr 19, 2021
04/21
by
Charles (charles38)
data
eye 7
favorite 0
comment 0
A box meant to hold all corporations cards for Terraforming Mars. It's large enough to allow all cards to be in premium sleeves (using the standard sleeve format for 63.5*89mm cards) and should have enough room for the few corporations that might be added in the next expansions.
Topics: thingiverse, Playing_Card_Holder, stl, Terraforming_Mars, playing_card_box, sliding, Games
4
4.0
Mar 13, 2021
03/21
by
Michal Wojcik (Arcizo)
data
eye 4
favorite 0
comment 0
I couldn't find a stand that would display the cards, as well as the deck, so I designed my own. Managed to print without supports on prusa i3.
Topics: thingiverse, holder, card, Decor, deck, display, playing, cards, Playing_Card_Holder, stand, stl
1
1.0
Apr 19, 2022
04/22
by
Cooper McCann (ponymont)
data
eye 1
favorite 0
comment 0
A friend wanted a card box to store some playing card decks. A simple request so I made this box. Stores 8 decks of cards or less and some dice with the dice storage option (made for 16mm dice nominally). Has a piano hinge on the back that uses filament as the pin, seems to work well, though it only opens to 90 degrees so don't break it, hah. Added space for some pencils and paper for keeping track of scores. Has a magnetic closure as well which uses 4-6 2mmx6mm magnets glued in. Seems to work...
Topics: box, thingiverse, playing_cards, Playing_Card_Holder, Storage_Box, Playing_Card, stl, Games
6
6.0
Mar 22, 2021
03/21
by
Shane Russell (StormKat)
data
eye 6
favorite 0
comment 0
A friend asked for a card case for his Skip-Bo cards. The deck dimensions were 50mm x 59mm x 90mm I even left room for the instructions if needed.
Topics: Containers, stl, Playing_Card_Holder, card_holder, Game_Card_Case, playing_card_case, thingiverse
12
12
Jan 14, 2021
01/21
by
Søren Backmann (Backmann)
data
eye 12
favorite 0
comment 0
Playing card holder to help kids hold em without getting tired in the hands og droping them all over the table. Prints without support. Rotate Right part upside down
Topics: thingiverse, card_holder, stl, Playing_Card, playing_cards, Playing_Card_Holder, Toy & Game...
2
2.0
Apr 19, 2022
04/22
by
Neil Doruff (GameOverDude)
data
eye 2
favorite 0
comment 0
Yes, there are a bazillion card cases for standard decks of cards. But what makes this set different is that I made it. And i like to share. This case is for your standard size deck of playing cards It is double-wide for storing large decks, like UNO [Useful Crap #025]
Topics: useful_crap, thingiverse, Toy & Game Accessories, card_holder, playing_cards,...
6
6.0
May 1, 2021
05/21
by
Jeremie Kletzkine (jrmk)
data
eye 6
favorite 0
comment 0
I edited a stone to smoothly integrate 6 standard playing card decks. The original rock model: https://www.thingiverse.com/thing:2571112
Topics: stl, Playing_Card_Holder, Toys & Games, deck, rock, deck_holder, playing_cards, stone,...
3
3.0
Jul 3, 2021
07/21
by
(Llama_)
data
eye 3
favorite 0
comment 0
I have several other designs on my account so be sure to check those out too, i also have an etsy where you can purchase these here: https://www.etsy.com/shop/LlamaCrafting I will update photos of all the stands once they have been ordered and/or printed. This is a 3d printed poker playing card stand that fits multiple decks per shelf, there are also versions of this stand: Each version is read: number of shelves (hight) x how many can fit across each shelf (width) x how many deep it can fit on...
Topics: Playing_Card_Holder, playing_cards, poker_card, display, stand, 3D Printing, shelf, thingiverse, stl
4
4.0
Mar 21, 2021
03/21
by
Jacob Marsh (AnotherJake)
data
eye 4
favorite 0
comment 0
This is a Playing Card Holder with an angled draw slot and a discard slot. The "Half" file will fit most standard printers and cover you for a large number of cards. The "Full" design is very large and will only print on large machines, but it will work better if you have different kinds of cards in your game. I made these for Apples to Apples because of the absurd number of cards used in that game, but the slots are sized for normal playing cards. Normal cards will fit...
Topics: stl, Toy & Game Accessories, Playing_Card_Holder, card_holder, card, Cards, thingiverse,...
3
3.0
Jun 11, 2021
06/21
by
David Treadway (DDTstudio)
data
eye 3
favorite 0
comment 0
Designed this Cards Against Humanity Stackable Card Organizer to use multiple expansion packs. Printing: This was designed to print max bed size for Ender 3. Full print 210mm x 193mm x 110mm walls/top/bottom and 20% infill. Slide Lid groove may need minor sanding but lid should push fit into the space tightly and not need anything else to secure it.
Topics: Playing_Card_Holder, CardsAgainstHumanity, Toy & Game Accessories, thingiverse, Cards,...
10
10.0
Apr 30, 2021
04/21
by
Reignand Bongao (Notxtwhiledrive)
data
eye 10
favorite 0
comment 0
This is Tuckbox (box that holds cards) designed for Poker sized cards (2.5in x 3.2in) themed after the The Royal Butterfly from Star vs. The Forces of Evil. I designed this early 2019, but never printed it cause I lost interest on the show. The design was theme after the striking card illustration set of Malthus art, his tumblr here: https://malthuswibble.tumblr.com Print one of each part and glue together. this was designed after my printer's tolerance, some sanding may be required in assembly.
Topics: stl, disney, tuckbox, Playing_Card_Holder, playing_cards, Containers, thingiverse,...
9
9.0
Jan 10, 2021
01/21
by
Anton Mikhaylov (twix)
data
eye 9
favorite 0
comment 0
This is a basic 6 deck card holder created specifically for Settlers of Catan board game. Although it could be used for any other playing cards with dimensions of up to 54 by 80 mm. We love playing this game, but it is always frustrating to see resource card decks break and scatter all over the table throughout the course of the game. So I've created this THING to solve the problem.
Topics: Settlers_of_Catan, thingiverse, card_holder, stl, catan, SettlersOfCatan, Playing_Card_Holder, Toy...
2
2.0
Jul 25, 2021
07/21
by
Robert Haddon (friedmutant)
data
eye 2
favorite 0
comment 0
Fits lots of sleeved playing cards! I designed it for my Shadows of Brimstone board game card collection, but it can be used for anything that uses the same card format (I think it is 2.5" x 3.5"). Three rows of cards in 'landscape' orientation. The length of the tray, with a lid on it that I have not yet designed) is designed to match perfectly the width of a Shadows of Brimstone core box. Designed for 3.0 mm birch plywood with kerf compensation being handled by the laser software....
Topics: lasercut, thingiverse, Playing_Card_Holder, Shadows_of_Brimstone, stl, laser, Toy & Game...
4
4.0
Apr 13, 2021
04/21
by
Powlee Golden (powlee)
data
eye 4
favorite 0
comment 0
Ideal to keep your hands free when playing games with lots of cards. The chainable design allows you to print as many (or as few) holders to use in your favorite games. SCAD file include, so you can play around with the length and various other parameters. The coupling parts are optional and can be deactivated easily.
Topics: thingiverse, cards, Toy & Game Accessories, card_holder, Playing_Card_Holder, stl,...
3
3.0
Jul 3, 2021
07/21
by
Echo Mirage (echomirage)
data
eye 3
favorite 0
comment 0
6/23/2021 UPDATE: Redid the interlocking uprights into three pieces to make the shelving unit more modular. When I came across Ratm3at's Mini Shelving, and the remix by and_kres, I knew it would be perfect for displaying my collection of playing card decks. Unfortunately, the dimensions weren't what I needed. I needed a height of 12in (30.5cm) and a width of just over 6in (15.5cm), but this wouldn't fit on my Prusa Mini's 7in print bed. - I resized the shelves, making a version for one deck per...
Topics: Playing_Card_Holder, playing_cards, deck, shelving_system, Toy & Game Accessories, shelf, card,...
6
6.0
Mar 5, 2021
03/21
by
David Leighton (ledeev001)
data
eye 6
favorite 0
comment 0
This is a box and lid for the Cards Against Humanity game. Inside there are two receptacles, one for the white and one for the black cards. The box is square so the lid can be put on in any orientation. This design can be printed in one color where the letters are recessed or multi colour where the colours are flush. With creative editing of the Gcode you could even print this in two colours on a single colour machine. At 0.2mm the lid and base take about 3 and 12 hours to print at 100% on an...
Topics: stl, cardholder, Playing_Card_Holder, Toys & Games, CAH, CardsAgainstHumanity, mmu, Cards,...
8
8.0
Apr 17, 2021
04/21
by
Ribald Drobens (ribaldos)
data
eye 8
favorite 0
comment 0
A parametric KISS-design for a playing card or thin sheet holder. It unifies socket and clamping facilities and features openings at the slit ends to both enable easy card insertion and prevent the slit from growing together during print. An usable instance (d = 17 mm) is attached in form of an STL file.
Topics: card_holder, thingiverse, customizable, stl, sheet_holder, Toy & Game Accessories, KISS,...
4
4.0
Mar 15, 2021
03/21
by
karl Swithenbank (Swithenbank)
data
eye 4
favorite 0
comment 0
This box has been designed for UNO cards but will hold other playing cards. It has a nice clean hinge system with a securing clip at the front. The cutouts on the side make it easy to take the cards in and out. This has been designed around function and ease of use. So the cards fit is not to tie and the latch at the front is secure but easy to open. I designed this as my UNO card boxes always brake and I wanted a more robust solution. I have uploaded the Solidworks files as well for anyone who...
Topics: Playing_Card_Holder, thingiverse, latch, card, playing_cards, UNO, clip, stl, Toys & Games,...
5
5.0
Mar 9, 2021
03/21
by
Sam Lucey (SamLegs)
data
eye 5
favorite 0
comment 0
No screws needed, instead I used two small sized Command Brand hanging strips ( look at photos above.) Leave the shelf set for a few hours before adding the weight of the deck of cards. Video tutorial explaining the strips can be found below. Each shelf took around an hour to print at 0.2 layer height, 15% infill (i think...) and 50.0 mm/s speed. Maybe have a test and just make one shelf and see how snug your deck fits. If you have any questions, please feel free to ask. Ill probably design...
Topics: Playing_Card_Holder, card, stl, thingiverse, deck_holder, Cards, playing_cards, deck, display,...
3
3.0
Jan 6, 2021
01/21
by
Carter Wassill (Daxxari)
data
eye 3
favorite 0
comment 0
I love the TCG pokeball tins, and I wanted to figure out a way to use them as decoration, so I made an insert and stand that allows you to display your cards! The slot is made specifically for top-loaders, so it likely wont work for any other types of card sleeves/containers. The tins themselves aren't super consistent in their dimensions, so I did my best to make this work regardless. Some parts may feel tight, and some parts may feel loose, but it should work either way. Also, this may...
Topics: Playing_Card_Holder, display, display_stand, stl, Organization, pokemon, thingiverse, stand,...
4
4.0
Apr 1, 2021
04/21
by
Saddam CZ (SaddamCZ)
data
eye 4
favorite 0
comment 0
A stand for playing cards, designed especially for kids who can't hold the cards in their hadns yet. It can stand on a tabletop or the "middle leg" of the frame can be held in a hand in a similar way playing cards are normally held, which should help the kids learn the "proper cardholding technique" :) Perhaps it will help someone keep their family entertained during the COVID isolation :( I haven't tested it yet since I'm still waiting for my Prusa MINI to arrive. Be brave...
Topics: card_stand, card_holder, thingiverse, playing_card_holder, playing_card_stand, Toy & Game...
6
6.0
Mar 3, 2021
03/21
by
Philippe PERRIN (pper)
data
eye 6
favorite 0
comment 0
I have made this remix of [Firestorm0708's playing card box](https://www.thingiverse.com/thing:3134086) because his box is for large card. My needs was for smaller playing cards, like sized 59x80 - 52 cards max. I change some littles details : * i have added a personal support in the hole of the box. You have simply to snap this support after printing. the box body not need supports to be print. * i cut a little the pins to print them on the long way to have more stiffness and not need supports...
Topics: playing_cards, Games, thingiverse, Cardbox, box, stl, Playing_Card_Holder, fusion_360,...
4
4.0
Jan 8, 2021
01/21
by
Justin Mulligan (bomully)
data
eye 4
favorite 0
comment 0
This is just a simple playing card holder. The second level is high enough to allow you to see the suit and number or character of standard playing cards (bicycle brand)
Topics: Playing_Card_Holder, Cards, stl, playing, Toy & Game Accessories, holder, thingiverse,...
8
8.0
Jun 20, 2021
06/21
by
http koopa (httpkoopa)
data
eye 8
favorite 0
comment 0
A simple card tray for holding standard poker sized playing cards.
Topics: Toy & Game Accessories, playing_cards, card_holder, thingiverse, Playing_Card_Holder, stl,...
6
6.0
Mar 17, 2021
03/21
by
Josh Stein (sjstein)
data
eye 6
favorite 0
comment 0
This is a simple playing card holder modeled after those that come in the base game of Memoir '44. Multiple units can be connected together to make the overall length greater. Note that I designed them "backwards" to hopefully avoid any nit-picky legal issues with the original manufacturer. I print them with supports due primarily to the notch on one side and to give the top of the large triangular extrusion a bit of help on the long runs. UPDATE (2-March-2020) - By request, I...
Topics: game_cards, card_holder, stl, Memoir_44, thingiverse, 28mm, Toy & Game Accessories, memoir44,...
11
11
Jan 15, 2021
01/21
by
Kay (StringGoddess)
data
eye 11
favorite 0
comment 0
Printed in purple ABS to hold my Craft Queen playing card deck. Customized version of http://www.thingiverse.com/thing:1213646 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1213646
Topics: playing card case, thingiverse, stl, card_case, Containers, playing_cards, customized, playing card...
3
3.0
Jun 10, 2021
06/21
by
Miika K. (kirjami)
data
eye 3
favorite 0
comment 0
Simple card holder with bit trays (or bit tray with with card holder). You can combine several, if you wish.
Topics: bit_tray, playing_cards, Toy & Game Accessories, bit_holder, thingiverse, Cards, card_holder,...
8
8.0
Apr 17, 2021
04/21
by
Bryson Jack (Bryson_Jack)
data
eye 8
favorite 0
comment 0
My daughter is midway through her Occupational Therapy Assisting program and she was tasked with designing an adaptive technology that would assist people with disabilities. With a 99 year old great-grandmother with failing eyesight, who still enjoys playing cards in mind, she thought of designing a holder for the trump card. Since I had the skills and the 3D printer, I volunteered both so that it wasn't a cardboard and tape production. Perhaps someone will find it usefull for something. The...
Topics: assistive_technology, magnifying_glass, Other, thingiverse, stl, adaptive_device, vision_impaired,...
4
4.0
May 1, 2021
05/21
by
Joeri Noort (Mr_JoerT)
data
eye 4
favorite 0
comment 0
I found a bunch of card holders, but all took ages to print and were overly complex and tough. This was inspired by [Playing Card Holder](https://www.thingiverse.com/thing:3050967) by crazycollie, which on my printer with my profile took 10 hours and 70 grams of filament to print. I descided to use vase mode and decreased the print time to 3 and a half hours, and the material to just 19gram. **Print settings are important! Don't just print with your usual settings.** Please see print settings...
Topics: stl, card_holder, uno, Playing_Card_Holder, card, Card_stand, Minimalistic, minimalist, minimal,...
4
4.0
Apr 12, 2021
04/21
by
Antoine Love (Oblivion)
data
eye 4
favorite 0
comment 0
For those pesky games where you can't eat your biscuit, drink your coffee, and slam a trump on the table all at the same time.
Topics: thingiverse, playing_cards, Toy & Game Accessories, Cards, Mr, holder, card_holder,...
9
9.0
Mar 10, 2021
03/21
by
Bradford Needham (bneedhamia)
data
eye 9
favorite 0
comment 0
Do you love [Shanghai Rum](https://en.wikipedia.org/wiki/Shanghai_rum), but don't love holding piles of cards in your hand? This holder is for you! Three tiers let you organize your huge hand without dropping cards or getting muscle cramps. And it has a pretty lattice for everyone to enjoy.
Topics: freecad, poker, card_holder, Playing_Card_Holder, stl, thingiverse, Lattice, shanghai,...
