0
0.0
Aug 17, 2022
08/22
Aug 17, 2022
by
Nathan Herrmann (Hermroid)
data
eye 0
favorite 0
comment 0
This is a simple cap that fits over the cavities in the original catan hex models uploaded my Mystik738. As stated in the original files, this works with 5mm spherical magnets. This file includes 12 caps (enough for one hex tile). To install the cap, first insert a spherical magnet into one of the cavities. Next snap one of the caps over the magnet. If the cap does not fit properly, simply sand or Dremel out the inside wall of the cavity until the cap fits properly. Next check that the magnet...
Topics: stl, game, catan, hole, magnet_plug, Games, magnet cover, magnet_Cap, thingiverse, magnet
0
0.0
Aug 17, 2022
08/22
Aug 17, 2022
by
Gideon Rodgers (The_Life_of_an_Outdoorsman)
data
eye 0
favorite 0
comment 0
This is a whopper plopper fishing lure that I designed and 3d printed. I had some requests from the comments on my youtube channel to share the design. So here it is. Note that I stopped the print and added the steel ball to the inside of the print then resumed. Check out the video on how I did it. No gluing is necessary. Items needed: .035" Stainless Wire 1x Bead 2x Treble hooks 2x Split rings 1x 1/4" Steel Ball (slingshot ammo) Since I have not even painted this one yet, I would...
Topics: fish_lures, stl, fishing, plug, lure, hook, bait, Sport & Outdoors, frog, popper, fish, whopper...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Naor Livne (cypher0)
data
eye 0
favorite 0
comment 0
Just a simple cover to a clothing dryer vent I wanted to close, yes it's very sunny outside.
Topics: stl, Household, Vent, cover, hole_plug, thingiverse
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Johannes Brugmann (Blauhand)
data
eye 0
favorite 0
comment 0
Wall mounted clectric car level 1 / level 2 holder Optimized of two different plug holder
Topics: stl, plug, older, Household, halterung, electric car, Elektroauto, halter, plug holder,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Hilton Janfield (ogValdus)
data
eye 0
favorite 0
comment 0
Please also like and download this file on Printables: https://www.printables.com/model/252373-parametric-dc-plug-support-using-network-jack (Printables gives us free stuff if enough people do it!) — My laptop's DC charger plug sucks. It's tiny 3mm barrel became annoyingly loose after just a few months of use, to the point where even slight movement would make it lose its connection, and it wouldn't take much for it to fall out. The replacement charger I ordered ended up being even worse. So,...
Topics: stl, network, charger, laptop, plug, acer, ethernet, Computer, aspire, thingiverse, rj45, parametric
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Cole Holloway (coleholloway)
data
eye 0
favorite 0
comment 0
I wanted a plug for my cooler that was a little more secure than the stock plug. This one fits very tight and should work well.
Topics: cooler, stl, plug, camping, drain, Outdoor & Garden, thingiverse, threaded, Coleman
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Chris N. (cnaslain)
data
eye 0
favorite 0
comment 0
This is a small case to host an electronic connector for the DS18B20 Temperature Sensor. The electronic part is this one: https://www.aliexpress.com/item/32862883775.html You can use it with an Arduino or a Raspberry Pi like I did (1-Wire device). I have exported two STLs, one with a mount for a 19" rack, and one without any mount (you can modify it or use double sided tape to fix it). You don't need any screw. The temperature sensor cable will hold the electronic board ;-)
Topics: stl, plug, DS18B20, case, Electronics, arduino, thingiverse
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Renge Last (RS_99)
data
eye 0
favorite 0
comment 0
This is a replacement plug for most common air mattres. You need to print both parts once. Prints easily und works fine!
Topics: stl, plug, air mattres plug, Replacement Parts, replacement plug, Air mattres, thingiverse
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Christian (techam)
data
eye 0
favorite 0
comment 0
These Plugs are created to seal up the Screwholes of Brakecalipers and Mastercylinders while they are stored. They can easyly be screwed in with an T30-Torx Screwdriver and also be removed the same way. They cant be tightend up, as the head would shear off. In that case the remaninig part is created in a way, that it still has enough of the Torx to unsrew the plug. I recommend a small O-Ring under the Head for additional sealing, but be aware, that these are not 100% tight. Main use is just to...
Topics: motorcycle, stl, plug, Nissin, brembo, Automotive, Brake, thingiverse
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Kelly Fulmer (Burnt_Toast)
data
eye 0
favorite 0
comment 0
Updated file with General Logo
Topics: stl, thingiverse, Other, Polaris General, polaris, Drain Plug
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Martin Hansen (Maartinhansen)
data
eye 0
favorite 0
comment 0
I loved the original design, but the edges were a bit sharp for me, and I didn't need for it to be with my keys. So here it is. A minimalistic buckle plug!
Topics: seatbelt_plug, stl, thingiverse, seatbelt, Automotive
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Vijit Coder (Vijit)
data
eye 0
favorite 0
comment 0
A simple thing for parking power plug (euro standard). I tired that cable of washing machine falls from time to time behind the machine. So, here is the solution, that suddenly turned to a good idea. I can use it for parking other electric cables! New photos will coming soon :) There is no special moments about printing. If the plug wouldn't fit, drill the holes with a 5mm bit. Versions difference: v1 for mounting on double-side adhesive tape, v2 for a screw mount. The source is...
Topics: Household Supplies, stl, thingiverse, plug holder, euro plug
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Alexander Thies (XRoNiN)
data
eye 0
favorite 0
comment 0
A hydrodynamic 72mm buttplug with a hole in the middle.
Topics: hole_plug, Buttplug, stl, thingiverse, Household, sextoy
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Bon Droc (PtisHAN)
data
eye 0
favorite 0
comment 0
Workhouse plug
Topics: Parts, plug, stl, workhorse, thingiverse
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Victor Butler (vicbotnik)
data
eye 0
favorite 0
comment 0
I lost the cap that covers my hitch screw. It sat proud of flush so it was only a matter of time before it disappeared. Went to buy another one and decided to make one that actually fits with the screw plug installed. The part I modeled it after is [Mopar 55077311AB Plug-Trailer Hitch](https://www.moparpartsgiant.com/parts/mopar-plug-trailer-hitch~55077311ab.html). Fits my 2014 Ram 1500. Probably fits all Ram models between 2003-2020. You can go to the above site and put in your make and model...
Topics: dodge, truck, plug, stl, dodge_ram, thingiverse, Automotive, hitch, pickup, trailer, Ram_pickup,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
samuel allen (sdallen)
data
eye 0
favorite 0
comment 0
works great no trouble fits great u can use tpu too
Topics: 2x2 post plug, fence post plug, plug, stl, thingiverse, Fencepost, Outdoor & Garden
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
(XRoNiN)
data
eye 0
favorite 0
comment 0
A buttplug shaped like a snowman. Three spheres with 75mm / 60mm / 45mm diameter. #####Dimensions Max. Diameter: 75mm Height: 150mm
Topics: BDSM, plug, Buttplug, stl, thingiverse, Household, sextoy, toy
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Frank Nolet (WavZ)
data
eye 0
favorite 0
comment 0
Remix from: https://www.thingiverse.com/thing:3409187 Thank you! This clip fits 12AWG Main Lipo leads for easy and secure protection for your 6S balance Leads. Print in TPU.
Topics: LiPo_Battery, 12AWG, lipo balance, balance_plug, battery_cover, stl, thingiverse, 6slipo, R/C...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Noah Scott (sci-nc)
data
eye 0
favorite 0
comment 0
Set of 3 ear expanding tapers that'll get you up to 22mm by the end of the 3rd
Topics: plug, Earrings, earrings, gauge, stl, claw, thingiverse, horn, plugs, stretching, expander, taper,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Szymon Świtalski (szymon_witalski)
data
eye 0
favorite 0
comment 0
Honda MBX 50/80 Oil Pump Delete Plug I design this to put into engine case when I remove my 2T oil pump. I think PETG will survive transmission oil temperature. Now I ride 300km with this and it's hold in place and don't leak. Remember to always run on premix ;P
Topics: plug, honda, bike, mbx, motorcycle, stl, oil pump, thingiverse, Automotive, moped
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
John Schilling (DeliriousGA)
data
eye 0
favorite 0
comment 0
These are replacement female ends with raised numbers to put on your LED animation pigtails before installing them in a controller. They are numbered on 2 sides to make them easy to read, especially if you paint the numbers or print in 2 colors. There are file sets of 1-4, 1-8 & 1-16 so you can print what you need at once. There are also individual collars numbered 1-16 in case you just need to print one.
Topics: xlights, pigtail, xConnect, stl, Electronics, thingiverse, xConnect_End_Plug
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
wacky jacky (wacky123)
data
eye 0
favorite 0
comment 0
Floating Troll coral frag with green star polp (GSP), floats mid tank with the magic of trapped air bubble side. Note: Frag must be anchored to a rock of atleast 10lbs and tied to it with fishing line i added models : original is about 120mm high in length and second model is 60% scale of it
Topics: reef_tank, corals, frag-plug, saltwater, floating_frag, Pets, coral, floating_coral, stl, reef,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
(XRoNiN)
data
eye 0
favorite 0
comment 0
This 60mm plug has a very soft rise for easy entries. It has a handle so that your partner can guide in more easily. #####Dimenstions Max. Diameter: 60mm Diameter at base: 30mm Insertable Length: 120mm Height: 186mm
Topics: BDSM, plug, Buttplug, stl, thingiverse, Household, sextoy, toy
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
omm mm (zymas)
data
eye 0
favorite 0
comment 0
Plug for Fox fork series 36. The plug is self-supporting by friction and pressure. Tested in multiple sutiations like drops and bumps and no problem so far. Printed in TPU and PLA getting the best performance in TPU thanks to its mud,water and heat resistance. TPU material used with print details (infill 100%): https://fiberlogy.com/en/fiberlogy-filaments/filament-fiberflex-40d/ PLA material used (infill 100%): https://www.3djake.de/3djake/ecopla-matt-dunkelgrau?sai=5384 Not sure if it would...
Topics: airtag, plug, bike, mtb, fox, stl, thingiverse, Other, apple, emtb, fork 36
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Montana Monk (MontanaMonk)
data
eye 0
favorite 0
comment 0
My travel trailer has two inlets for water which had rubber plugs to cover them. The rubber was wearing out, so I decided to make plugs for the two inlets. The inlets also had screen filters, so the plugs had to have a recess to accommodate the filter. As long as I was designing, I made hose caps, too. I wanted an easy-to-grasp grip on each, so incorporated that in the design.
Topics: Parts, Cap, Plug, Garden Hose, stl, thingiverse
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Josef Kmínek (kminous6)
data
eye 0
favorite 0
comment 0
Trailer connector flap
Topics: Trailer, ISO 1724, connector flap, 7pin plug, ISO1724, stl, thingiverse, trailer plug, Automotive
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Pedro Gouveia (gouveiapedro)
data
eye 0
favorite 0
comment 0
Mercedes SLK (R170 generation) jack plug/cover (part number 170 997 00 86). An O-ring should be feated at the tip (2,5mm section; I don't know the ideal diameter... maybe 20mm, carefull on the assemble, the finger are fragille. Printed the plug with supports on the half lip that stays a bit apart from the table. The PIN doesn't need supports, print it upside down with the head against the table (should look like Pizza Tower).
Topics: R170, Kompressor, plug, stl, mercedes, thingiverse, jack, SLK, Automotive, 1709970086, cover
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Primo (PRIM0)
data
eye 0
favorite 0
comment 0
This part is intended to be used outside of a printer enclosure to cover up the hole for the filament insertion. At the same time it can act as point of attachment for the filament tube. It has a 5,5 mm diameter hole on one side. A PC-4 M6 push fitting can be attached to connect to PTFE tube. Please note that you will most likely need a wrench or pliers to screw the push fitting in. Alternatively you can print it at a scale of 110 % which effectively increases the hole diameter to about 6 mm....
Topics: hole_plug, 3D Printer Accessories, 3d_printer_enclosure, filament_guide, stl, Push_Fittings,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Ludovic Leblanc (LuDo_lbc)
data
eye 0
favorite 0
comment 0
Bouchon pour vélo
Topics: bike, bicycle_handlebar, Bike handlebar cap, guidon, handlebar, stl, 3D Printing, thingiverse,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
(anonymous1000)
data
eye 0
favorite 0
comment 0
This Item is loose fit. It is meant to be taped over in both directions at least once and have a full width knob taped over the ends of the first 2 pieces of tape at least twice. Step 1: Insert plug Step 2: Tape the plug in tightly once (minimum) over long ways with half width tape, then once over short ways with full width tape. Step 3: Tape full knob tightly around the cut edges of the previous step at least twice. Step 4: Tape your knob full or half wide.
Topics: Sport & Outdoors, hockey_stick, plug, knob, stl, thingiverse, Icehockey, hockey, hockey_puck
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Bob pop (Bobanx)
data
eye 0
favorite 0
comment 0
Oral B Holder - Electricity Plug
Topics: plug, Bathroom, oral-b, toothbrush, stl, thingiverse, adapter, electricity
I got really excited with my new foxtail and was twirling around a bit hehe. Tail purchased from http://crystaldelights.com/?a_aid=531e85092f4dc Visit my tumblr to see more (foxytail11.tumblr.com) (NSFW) Source: https://www.youtube.com/watch?v=t2aTMoO62g8 Uploader: Nico Fox
Topics: Youtube, video, People & Blogs, petplay, tail plug, tailplug, foxytail11
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Jeppe Kristensen (Slendrick)
data
eye 0
favorite 0
comment 0
My new blinds were missing an end cap in the box, so I printed one instead of delivering them back. The cap might work for similar blinds with ø15mm tubes.
Topics: Blinds, plug, curtain, stl, thingiverse, Falster, jysk, plugs, window_blinds, roller_blinds,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Matt Kozik (mkozikx)
data
eye 0
favorite 0
comment 0
This model was edited to be glued on to an existing jebao magnet dismatlesed from an old wave maker
Topics: frag-plug, coral, stl, coral_reefs, thingiverse, marine, frag, Other
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Alex Rozhkov (ralex2304)
data
eye 0
favorite 0
comment 0
Plug for PC case zet gaming rare h1. For 60x16 mm. After printing, you need to cut a strip around the perimeter, as in the photo. You can cut out windows for cables. Заглушка для корпуса ПК zet gaming rare h1. Для отверстия 60x16 мм. После печати нужно вырезать полоску по периметру, как на фото. Можно вырезать окошки для кабелей.
Topics: computer_case, hole_plug, plug, Computer, stl, thingiverse, flexible
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Sergei Shubenkov (SergunWE)
data
eye 0
favorite 0
comment 0
This is an unfinished order, so it has not been tested on the machine. Diameter is 60 mm.
Topics: plug, machine, stl, thingiverse, Automotive, auto, wheel
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Wojciech K (Kukinatoor)
data
eye 0
favorite 0
comment 0
I would like to present simple set for your 230V outlet to prevent electrical shock. Set contains outlet plug and key sliced to 2 parts for easy print. Enjoy!
Topics: children_safety, plug, Children, stl, Replacement Parts, 230v, thingiverse, Safety
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Salvatore Marotta (marosalv)
data
eye 0
favorite 0
comment 0
cap for the electronic cigarette voopoo drag x, fits well on spouts with an external diameter of 13mm and internal diameter of 8mm, scale in case you need a different size, easy to print, in just 8 minutes.
Topics: drip_tip, plug, voopoo, stl, thingiverse, Replacement Parts, cover, Drag_X
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Joe Fusco (jfusco)
data
eye 0
favorite 0
comment 0
I needed a blade plug and didn't feel like buying one. It's the same size as one you'd buy from Ultrasabers. It's best printed in "clear" filament with about 15% infill. That gives the closed end enough density to tame the brightness of the LED(s).
Topics: lightsaber, plug, star_wars, stl, thingiverse, Other, saber_blade_plug
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Jay Ducharme (ThingiJay)
data
eye 0
favorite 0
comment 0
This is a replacement for the little cap (plug) at the bottom of the Trikke T12's front fork. Just tap it in.
Topics: hole_plug, t12, plug, front_fork, stl, fork, thingiverse, trikke, cap, Replacement Parts
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Hans Peter (Blackleaf444)
data
eye 0
favorite 0
comment 0
Thing is work in progress not finsih
Topics: bike, stl, thingiverse, plug, DIY
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Yoshi Yasuda (Yoshi_17)
data
eye 0
favorite 0
comment 0
Bar end cap for road bikes. Stop killing people AH! Ride your bike instead.
Topics: peace, Sport & Outdoors, bar_end_plug, road_bike, bike, bar_end_cap, handlebar, stl,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Florian K. (checkit53)
data
eye 0
favorite 0
comment 0
---------- GERMAN ---------- Da mich der Anblick der Stabantenne an meinem Opel Astra K gestört hat und ich ohnehin überwiegend Android Auto nutze, habe ich diesen Blindstopfen kreiert. Auch mit dem Blindstopfen, hatte ich bisher keinerlei Probleme mit dem Radiosignal (ob AM, FM oder DAB) und den Verkehrsmeldungen. Nicht für jeden etwas, aber mir gefällt es so besser. Der Stopfen ist mit einer Einkerbung versehen, sodass man diesen mit einer Münze auf und zudrehen kann. Wirklich nötig war...
Topics: Blindstopfen, Plug, Screw, Screw Cover, opel, stl, antenna, thingiverse, Blind Plug, Automotive,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Xavier Q. (Jarhead1509)
data
eye 0
favorite 0
comment 0
52mm Gauge hole plug
Topics: hole, car, 52mm, plug, gauge, stl, thingiverse, Automotive
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Elsa Lundqvist (elsalundqvist)
data
eye 0
favorite 0
comment 0
Plug Box for a Geetech i3W components.
Topics: 3D_Printer_Parts, plug, stl, 3D Printer Parts, thingiverse
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Shelby Sessions (swsessio)
data
eye 0
favorite 0
comment 0
A cover for standard male 4mm banana jacks. Keeps live ends from shorting out when disconnected or allows you to plug into the back of a banana jack that has a male end sticking out.
Topics: banana, stl, Electronics, thingiverse, banana_plug, cover
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Colby Sellers (Colb12)
data
eye 0
favorite 0
comment 0
A plug that sits in the frame to stop plastic or dust from getting in hard to clean places.
Topics: cr6se, plug, Creality, part, stl, 3D Printer Parts, thingiverse, TPU, 3dprintable
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Xioneks dot (xioneks)
data
eye 0
favorite 0
comment 0
Made a dust cap/cover/plug for my desktop amp cuz I usually use it's RCA out at the back instead. Tryna prevent dust buildup and also perhaps slow down any oxidation on the contact Made one cuz I couldn't find one online. Available in f3d file format if you wanna edit it Printed in TPU on an Ender 3 printer - 0.12mm layer height - no supports - remember to print with a brim
Topics: amplifier, 6.35, 4.4mm, audio jack cap, amp, audio jack cover, audio jack plug, 6.35mm, stl, audio,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Christian Pomeroy (CPomeroy)
data
eye 0
favorite 0
comment 0
This is a replacement oil drain plug for British Seagull outboard motors. The thread is 3/4-12, and I have modified the design slightly to make the hole down the middle a little smaller, and hexagonal. This is in case the oil cap breaks across the layer lines, it should still be possible to put an allen key down it and unscrew the threaded stub that way. There's a version with a slightly larger flange (could be used with an O-ring) in case it has sealing problems, but I hope it doesn't come to...
Topics: Replacement_part, British_seagull, Drain, Outboard, Oil_drainage, Seagull, replacement, British,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
(WTF_Racing)
data
eye 0
favorite 0
comment 0
Simple threaded plug and flanged nut that I needed to plug an empty tone pot hole on a bass guitar. Screw thread is 7mm OD and 1" long. (sorry for mixing units).
Topics: hole_plug, bass_guitar, electric_guitar, stl, Music, thingiverse, threaded, guitar
