5
5.0
Mar 3, 2021
03/21
by
Matthew Humphrey (motocoder)
data
eye 5
favorite 0
comment 0
I am a big fan of the Bear upgrade for the Prusa i3 printers (See details here: https://github.com/gregsaun/prusa_i3_bear_upgrade ). When i was assembling the upgrade, I found it quite tedious to get the Y idler and Y motor holder/pulley aligned with the belt center that is determined by the belt holder. The belt holder is out of sight underneath the frame (and the heatbed, if you've already installed that). In addition. to adjust the motor holder requires removing the motor. This simple tool...
Topics: prusa_i3_bear, prusa_i3, 3D Printer Accessories, thingiverse, stl, prusa_i3_rework, prusa_i3_mk3,...
9
9.0
Apr 24, 2021
04/21
by
yakin so (prosperer)
data
eye 9
favorite 0
comment 0
Here the top bracket plastic parts for Aliexpress Prusa i3 from Monda Online Store http://goo.gl/1uOYnl This is the top bracket that im design to use with 608z bearing to center the threaded rods For more parts check here http://www.thingiverse.com/thing:978021
Topics: prusa i3 parts, 3D Printer Parts, stl, prusa_i3_rework, prusa i3 p802, Sunhokey_Prusa_I3,...
11
11
Mar 21, 2021
03/21
by
Dmitry Zh (ZDV)
data
eye 11
favorite 0
comment 0
This is set of details and my view of building of Mendel Prusa I3. There are all details for Prusa I3, including endstop sensors for optic endstop boards and LaserCutting frame. Frame of printer is present in CorelDraw format. You will need 2 sheets of acrylic 800 x 500 x 6 mm. Some pars for thisproject: https://www.thingiverse.com/thing:563515 https://www.thingiverse.com/thing:2702416 https://www.thingiverse.com/thing:694650 https://www.thingiverse.com/thing:567071 For more information in...
Topics: Prusa_I3, stl, 3D Printers, Prusa_i3_case, PRUSA_I3_LASERCUT, PRUSA_I3_FRAME, thingiverse,...
4
4.0
Mar 21, 2021
03/21
by
Kevin Valk (Noclafasm)
data
eye 4
favorite 0
comment 0
The X-carriage had always quite some wiggle room. I did not like this and I even think it can result in some layer shifts. Instead of redesigning the complete X-carriage as I did before (https://www.thingiverse.com/thing:3145981). I just designed two spacers that can be added for a snug fit of the bearings.
Topics: prusa_i3_MK25, stl, prusa_i3_mk3s, 3D Printer Accessories, prusa_i3, prusa_i3_mk3, prusa,...
6
6.0
Jun 19, 2021
06/21
by
(Mark_Greco)
data
eye 6
favorite 0
comment 0
Summary I have a problem bumping off my topper on the z axis so i built this one This is a Z axis topper for your prusa. I like the idea of jazzin up your printer. My prusa is a Dolly or Log Build from Tom Sanladerer or Chris Riley Chris is a great youtuber see him in the link below. https://www.youtube.com/channel/UCqRiv7rQuxge63bqJ2hVNUQ Print this with or without supports I did this one without. there is a right and a left side model. tap the hole in the Griffin 3mm insert a screw and never...
Topics: thingiverse, stl, prusa, prusa_i3_mk2, prusa_i3_rework, prusa_i3
6
6.0
Mar 17, 2021
03/21
by
Matthew Humphrey (motocoder)
data
eye 6
favorite 0
comment 0
NOTE: This is an update to my [original rear plug PSU design] (https://www.thingiverse.com/thing:3180564) Although the original design was functional and served it's purpose, several users reported that it tends to warp during print. Although I have not completely eliminated warping with this design, I have minimized it to the point that it's not an issue (you might notice the bottom of the case is a fraction of a millimeter not level, but the bottom component will easily flex to fit this small...
Topics: prusa_i3_mk2s, haribo, vslot, prusa_upgrade, Original_Prusa_i3_MK2, prusa_mods, stl,...
11
11
Jan 18, 2021
01/21
by
Jason King (burghking)
data
eye 11
favorite 0
comment 0
This is an alternate rendition of the LCD dial for the Prusa i3 series. My rationale for the design was to incorporate a tactile element on the perimeter of the dial that corresponded to its rotational clicks. My count for a full revolution was 24 clicks and therefore I introduced 12 sets of grooves and lands to the dial. The design also features a wide concave top for a fully ergonomic thumb press as well as a tighter connection point on the bottom to reduce any play when activated.
Topics: 3D Printer Parts, prusa_i3_mk3, Original_Prusa_i3_MK2, thingiverse, prusa_i3_mk2,...
9
9.0
Jan 17, 2021
01/21
by
Björn Woller (bjoernbb)
data
eye 9
favorite 0
comment 0
Y-Idler for Prusa 3D Printer
Topics: 3D Printer Parts, prusa_i3_hephestos, prusa, thingiverse, prusa_i3_rework, prusa_i3_mk2, prusa_i3,...
9
9.0
Jun 6, 2021
06/21
by
Romain MakerFr (RoMaker)
data
eye 9
favorite 0
comment 0
The I3-R is a remix of the very good I3 MK2 by Josef Prusa, the worry, it was out of my budget and the same with the originals 3D print files was virtually unfeasible because the parts where fits with are not standard and therefore either very expensive or not found at retail! That’s why I created the I3-R, fully compatible with the standard parts found everywhere !
Topics: reprap, 3D Printers, prusa_i3, thingiverse, prusa_i3_rework, Prusa_i3_Steel, stl, prusa_i3_mk2,...
4
4.0
Aug 9, 2021
08/21
by
Rod Kimmell (Rkimmell73)
data
eye 4
favorite 0
comment 0
This is a remix of [Boogie's Big Einsy Case](https://www.prusaprinters.org/prints/31558-big-einsy-case) on prusaprinters.org for the Bear Upgrade. Additional attributions on the prusaprinters.org listing: [Big Einsy Case for Bear Upgrade](https://www.prusaprinters.org/prints/72191-big-einsy-case-for-bear-upgrade). Notable changes * Geometry added to mate with the Bear Upgrade V-Slot Extrusions ◦ Use either drop-in or standard T-Nuts ◦ Use either M5-10 socket head or M5-8 flat head screws...
Topics: Original_Prusa_i3_MK3, thingiverse, prusa_i3_mk3, 3D Printers, prusa_i3_bear_upgrade, prusa_i3, stl
4
4.0
Mar 20, 2021
03/21
by
Chris Decker (jack_dark)
data
eye 4
favorite 0
comment 0
The original by u/ricktress is great, but I found that it still slid around and if the extruder assembly came up all the way and it wasn't perfectly lined up with the guide, filament would cause the guide to get pushed up. This new design solves those problems.
Topics: prusa_i3_mk2, prusa_i3, prusa_i3_mk2s, filament_guide, prusa_i3_mk3, thingiverse,...
7
7.0
Jun 11, 2021
06/21
by
(Adrix64)
data
eye 7
favorite 0
comment 0
Summary Utilizzando il supporto motore fornito con il Titan, e stampando questi pezzi, si viene a creare questo gruppo estrusore direct con Titan + E3dv6 da montare con sole due viti sulla piastra originale in metallo della Geeetech Prusa I3 Pro. Se si vuole utilizzare un altra piastra, si dovrà solo creare con le stesse modalità ma con misure diverse l'aggancio posteriore. Il motivo per il quale è stato creato è la semplicità e velocità con il quale si può sostituire tutto il gruppo,...
Topics: Geeetech prusa i3, prusa i3 titan+e3dv6, titan + e3dv6, thingiverse, Estrusore prusa i3,...
10
10.0
Apr 21, 2021
04/21
by
Aaron Gilliam (agilliam)
data
eye 10
favorite 0
comment 0
**** WORK IN PROGRESS **** UPDATED 3/2/16 - Added all the STL files of the final version. PLEASE make sure you measure and print out the correct X- blocks. Geeetech ones should all be the same. However this set is designed to upgrade various Prusa's. TODO: BOM - List of all screws, nuts, bolts, and bearings. Add Layer Fan - Easy, just too much going on. But working on it. Add Fixing Block with proximity sensor for autolevel / replace Z limit switch. I have never cared for the Prusa setup, ALL...
Topics: Dual_Bowden, thingiverse, Prusa_i3_conversion, 3D Printer Parts, stl, Prusa_i3_Bowden, Prusa_i3,...
6
6.0
Apr 19, 2021
04/21
by
el marciano (elmarciano)
data
eye 6
favorite 0
comment 0
After building the Prusa Enclosure for my MK2s, I wanted to have the LCD Controller outside of the enclosure. But I also wanted it to be easily removable for maintenance of the printer or to store it inside the enclosure. This is my solution, it works by sliding LCD Controller (with the new arms attached) up to remove the LCD Controller from the brackets and sliding LCD Controller down to secure it back into the brackets. It's hangs low to make sure there's enough clearance for my enclosure...
Topics: thingiverse, 3D Printer Parts, stl, enclosure, prusa_i3_mk3, prusa_i3, lcd, prusa_i3_mk2s,...
3
3.0
Mar 25, 2021
03/21
by
Quentin Mer (Kwint007)
data
eye 3
favorite 0
comment 0
This is a new knob for the Original Prusa I3 MK3/MK3S ! The design is simple but very nice and pleasant to use !
Topics: stl, button, prusa_i3_mk3s, prusa_i3, thingiverse, prusa_i3_mk2, prusa_i3_mk3, 3D Printer Parts,...
10
10.0
Jan 18, 2021
01/21
by
Heiko Schultz (PredatorJr)
data
eye 10
favorite 0
comment 0
ATTENTION! Didn't figure that the carriage-back will hit the extruder brackets on top. Max height is limited to 190-195mm with default brackets. https://www.facebook.com/photo.php?fbid=1823209807743196&set=gm.917326815118467&type=3&theater preview below ============================ extruder body of the MK3 for the MK2 MMU This parts make the extruder to fit with the noctua fan that is included with the future MK2.5 upgrade and the new fan nozzle from the MK3. the origin MK3 has...
Topics: 3D Printer Parts, prusa_i3_mk3, thingiverse, prusa_i3_mk2, prusa_i3, stl
4
4.0
Mar 21, 2021
03/21
by
yakin so (prosperer)
data
eye 4
favorite 0
comment 0
This one is for hold the m8 rod on both side so that the printer will not vibrate and move. I screw it into the plywood base. My prusa i3 is from this store on aliexpress http://goo.gl/1uOYnl but i dont recommended 3d printer from this store, if you want to buy one better go with this one http://goo.gl/GW6NhQ cause you can update the firmware for their printer. The store that i buy my printer is stuck with their melzi that we can't even upload updated firmware. If anyone have same printer...
Topics: prusa_i3_parts, stl, Sunhokey_Prusa_I3, aliexpress_prusa_i3, 3D Printer Accessories, aliexpress,...
3
3.0
Jan 19, 2022
01/22
by
Mauro Alfieri (mauroalfieri)
data
eye 3
favorite 0
comment 0
The reel holder for Prusa i3 was designed in Fusion 360 and printed with the prusa itself. It uses components easily available at a DIY center such as an M8 threaded rod, 4 M8 nuts, a 10mm aluminum tube and two cable ties. It helps to keep the spool of filament in line with the extruder and bouden for optimal print quality.
Topics: prusa_i3_mk2, prusa_i3_rework, prusa, thingiverse, prusa_i3_mk3, prusa_i3, stl, 3D Printer...
6
6.0
Mar 2, 2021
03/21
by
Justin Gan (jgrg1)
data
eye 6
favorite 0
comment 0
Remix of the original Prusa Mk2S power supply cuff to support a KIS3R33S DC 7V-24V to 5V 3A Buck 5V USB converter (I bought this one: https://www.ebay.co.uk/itm/KIS3R33S-DC-7V-24V-to-5V-3A-Buck-5V-USB-than-Step-Down-Module-For-Arduino-UK/192369824145). There's just enough space in the base of the PSU to fit this tiny buck converter PCB. I did this so I could run a Raspberry Pi 3B+ off the Prusa PSU. UPDATE - 2018-08-18 Added some photos of the installation.
Topics: prusa_i3, prusa_i3_mk2, prusa_i3_mk2s, thingiverse, stl, 3D Printer Parts, Original_Prusa_i3_MK2
11
11
Jan 18, 2021
01/21
by
James Brown (SuperJimNZ)
data
eye 11
favorite 0
comment 0
This is a modified version of the Prusa i3 x-carriage and extruder. The prusa uses a smaller gear than commonly available, which results in misalignment with the hotend entry when used with those common parts. This version has the motor shifted 0.875mm (the holes shown in the section view are usually vertically aligned), to accommodate a gear with effective diameter of 7mm (like MK8). The x-carriage is also included, as one of the motor holes is shared with the motor. Other changes are, 1)...
Topics: stl, Original_Prusa_i3_MK2, thingiverse, prusa_i3_mk2, 3D Printer Extruders, prusa_i3,...
6
6.0
Mar 2, 2021
03/21
by
Justin Gan (jgrg1)
data
eye 6
favorite 0
comment 0
I've just purchased the parts for a full Bear upgrade (https://www.thingiverse.com/thing:2808408) of my Prusa Mk2.5, and as usual, making sure the frame is exactly perpendicular is extremely tricky. So, I created this 90 degree right-angle brace for the V-slot. The idea here is that you use M5 bolts (I only had 25mm bolts on-hand, so used a washer and a nut as spacers) and Tee-nuts to temporarily clamp the right-angle in place on the V-Slot aluminium extrusions, so you can then easily screw the...
Topics: prusa_i3, prusa_i3_mk2, prusa_i3_mk2s, mk2, thingiverse, stl, 3D Printer Accessories, frame, vslot,...
3
3.0
Apr 5, 2021
04/21
by
Thibaut Le Mouel (ThibautLM)
data
eye 3
favorite 0
comment 0
Just a simple motor dust cover for Prusa i3 MK2/MK3. Don't know if tis really useful but it looks nice.
Topics: thingiverse, Original_Prusa_i3_MK3, 3D Printer Accessories, prusa, stl, prusa_i3_mk3, prusa_i3,...
3
3.0
Apr 21, 2021
04/21
by
Mahmoud Salah El-Din (Mdluex)
data
eye 3
favorite 0
comment 0
I have designed a customizable foot to my reprap prusa i3 to make it stable while printing.
Topics: thingiverse, prusa, stl, foot, prusa_i3_mk3, 3D Printer Accessories, prusa_i3_rework, prusa_i3,...
3
3.0
Apr 24, 2021
04/21
by
Alan Deane (alan_deane)
data
eye 3
favorite 0
comment 0
Bracket to mount a Prusa LCD under a shelf, or inside an enclosure etc. I remade the original mount to mount on the roof of my enclosure. Mirror the stl for the opposite side.
Topics: Original_Prusa_i3_MK3, prusa_i3_mk2, stl, thingiverse, prusa_i3, 3D Printer Accessories,...
6
6.0
Mar 17, 2021
03/21
by
Eric VATAN (knightrider_007)
data
eye 6
favorite 0
comment 0
Francais : Remixé à partir du travail de Saltmera https://www.thingiverse.com/thing:2899999 pour pouvoir utiliser les couleurs du MMU2. Si vous n'imprimez pas le fond, aurez un motif troué. Impression possible en mono couleur. English : Remixed from Saltmera's work https://www.thingiverse.com/thing:2899999 to use MMU2 colors. If you do not print the background, you will have a hole pattern. Printing possible in mono color.
Topics: prusa_i3_MK3_MMU2, 3D Printers, thingiverse, stl, prusa_i3, prusa_i3_mk3
10
10.0
Apr 26, 2021
04/21
by
Terence Gross (tezz)
data
eye 10
favorite 0
comment 0
This is an upgrade to the GT2 belt holder on the Prusa i3 A8 Acrylic X Carriage, I found that the original one is rubbish... Maybe mine is too LOL but it works great, use the original screws with 2 m4 washers to hold the belt down. Also you might need to just drill the holes with 3.2mm bit as the Chinese brackets are not all created equal.... This works great if you add an adjusting X mount. If you remix this or make alterations, please upload them back with all original solid works files so...
Topics: thingiverse, prusa_i3, 3D Printer Parts, stl, prusa_i3_rework, Prusa_i3_Steel
6
6.0
Mar 2, 2021
03/21
by
Nubin Stanley (stanzlavos)
data
eye 6
favorite 0
comment 0
I wanted to replace the feet that came along with my Prusa i3 MK3, but most of the designs I found needed at least partial disassembly of the frame. So, I decided to make one. There were a few simpler options available, but I thought of going a little extravagant and applying all the new stuff I had learned in Fusion 360. :P * The main body was split into two so that it could be printed easily without supports. I printed them on my MK3 and the tolerance was enough for a good fit. Hopefully, it...
Topics: prusa_i3, prusa_i3_mk3, prusa_i3_mk3_base, thingiverse, stl, Original_Prusa_i3_MK3, prusa,...
3
3.0
Mar 25, 2021
03/21
by
Juan Manuel Grasso (3Dimension3D)
data
eye 3
favorite 0
comment 0
There's NO need for MMU2! Yo can print it with a single nozzle! (and some filament changes) Just situate in the plate the 3 models perfectly. Then errase all but one, save it, go back and "undo" errase all but an other one, and save the model. Do it one last time with the other one. Now you have 3 models separate that fit perfectly. Print the letters "original" and "prusa" first (no matter witch one first). After you print them, do NOT remove it from the plate. If...
Topics: stl, prusa_i3, thingiverse, prusa_i3_rework, prusa_i3_mk2, prusa_i3_mk3, mk3, prusa,...
5
5.0
Mar 3, 2021
03/21
by
Alex Witter (alexwitter)
data
eye 5
favorite 0
comment 0
Modified the Extended Relaxed tolerances Shroud, for a stronger fan mount. much better than the Prusa R3 shroud Printed in ABS no more cracking when installing or drooping after heating.
Topics: prusa_i3, thingiverse, 3D Printer Extruders, stl, prusa_i3_mk2, prusa_i3_mk3, prusa_i3_mk25
4
4.0
Mar 9, 2021
03/21
by
Michael O'Connell (Michael_O)
data
eye 4
favorite 0
comment 0
It's a knob. I like it better than the original.
Topics: Original_Prusa_i3_MK3, prusa, knob, stl, thingiverse, prusa_i3, prusa_i3_mk3, prusa_i3_mk2, 3D...
4
4.0
Jun 7, 2021
06/21
by
Gilles Bouscail (looping74)
data
eye 4
favorite 0
comment 0
Noctua NF-R8 80mm 12v Fan Bracket. Secure with a M4 x 8 flat head screw in an existing tapping on the feed side heating plate. Power supply 12 v either by a small separate power supply or by taking the 24v in the power supply of the printer and passing through a voltage regulator 24 / 12v (3 € on ebay)
Topics: prusa_i3_mk3, prusa_i3, thingiverse, 3D Printer Parts, stl, 3D_printing, prusa_i3_mk2,...
6
6.0
Mar 5, 2021
03/21
by
André LAMY (ad_lamy)
data
eye 6
favorite 0
comment 0
Extruder assembly for Prusa MK3S/MMU2S only with path through festo coupling PC4-01. Simplified filament feed and smoother path, the filament entry is part of the extruder motor plate, (no fs cover-mmu2s, no printer-adapter-mmu2s). Ir sensor holder with one side attachment on the extruder motor plate, (can adjust Ir sensor holder with washers on this side). Optional modified x-carriage. Optional extruder-cover with extra bottom attachment. Added mod that solve the noise generated by the...
Topics: stl, prusa_i3_MK3_MMU2, mmu2, prusa_i3_mk3, prusa_i3_rework, prusa_i3, mmu2s, 3D Printer Extruders,...
8
8.0
Jan 19, 2021
01/21
by
Jason Xu (XRT9)
data
eye 8
favorite 0
comment 0
This is a file containing all the Prusa i3 Bear components originally designed for v-slots but converted over for non v-slot extrusions. These were used on Misumi extrusions. All Non extrusion related parts can still be found in the original Bear thread. Supports touching base plate are needed for any having the v-slot portion horizontal. Others print fine without support. This is for the mk2.5 though many parts are the same!
Topics: 3D Printer Parts, thingiverse, prusa i3 mk3, prusa_i3_mk2, prusa i3 bear, prusa_i3, stl
5
5.0
Mar 10, 2021
03/21
by
Rene Grobbee (TraderTic)
data
eye 5
favorite 0
comment 0
This is my version for the Original Prusa i3 MK3s Filament cover by Area51 This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/5L3dQvwoa6x
Topics: Original_Prusa_i3_MK3, stl, thingiverse, prusa_i3, 3D Printing, prusa_i3_mk3, prusa_i3_rework
11
11
Jun 20, 2021
06/21
by
Bryan Varner (varnerrants)
data
eye 11
favorite 0
comment 0
Winter of 2018, I created a Prusa i3 clone. You can build this printer for $250, or less. I did, including the cost of a 1kg spool of ABS. The frame was based off the Original Prusa MK3 frame, but fabricated from plywood laminations. I created and used router templates (and a flush trim bit) from the Prusa .dxf files. The rest of the parts closely follow Tom Salanderer's MK2 Clone "Dolly", with some customizations for the parts I ordered from AliExpress. My official github repo for...
Topics: 3D Printers, prusa_i3_mk3, thingiverse, stl, prusa, prusa_i3_mk2, prusa_i3_rework, prusa_i3
3
3.0
Apr 5, 2021
04/21
by
Hector Elihu (HERD3D)
data
eye 3
favorite 0
comment 0
lock designed to prevent patio umbrella from spinning around when tilted to block the sun. designed for a 37mm umbrella pole. May work for sizes ranging from 36-38, but not tested. If you found this useful, please donate what you think it is worth to my paypal.me. Help cover the time of design. Thanks, Enjoy!
Topics: thingiverse, Original_Prusa_i3_MK3, prusa_i3_rework, prusa, stl, PRUSA I3 MK3S, prusa_i3_mk3,...
5
5.0
Oct 15, 2021
10/21
by
Pixel Glance (pixelglance3d)
data
eye 5
favorite 0
comment 0
**Like it? Support me.** ------------------------------- Donate: https://www.paypal.com/donate?hosted_button_id=SENKCZU2KZLNS Facebook: https://www.facebook.com/pixelglance3d Twitter: https://twitter.com/pixelglance3d Buy Models: https://cults3d.com/en/users/PixelGlance **Summary** ----------------- Improved version to mitigate **THERMAL RUNAWAY** errors. Air-flow properties have been improved to aim slightly more downwards to the print object rather than blowing at the exposed...
Topics: thingiverse, stl, Original_Prusa_i3_MK3, prusa_i3, prusa_i3_rework, prusa, prusa_i3_mk3,...
3
3.0
Jan 7, 2021
01/21
by
Sławomir Wojnowski (slawek)
data
eye 3
favorite 0
comment 0
Yet another design of extruder indicator for Prusa printers. Part uses a 6x3mm neodymium magnet that should be glued inside the hole, which centers the magnet to the motor shaft. This setup seems to work reliably for now (I had this printer for a week when designed it). I've included two versions of the print with the handle holes twisted by 30 degrees - I couldn't decide which looks better. During printing the motor gets quite warm, so I don't recommend to print with PLA because the tip of the...
Topics: stl, prusa_i3_mk3, prusa, thingiverse, prusa_i3, Original_Prusa_i3_MK3, prusa_i3_mk2, 3D Printer...
3
3.0
Mar 4, 2021
03/21
by
APuckNut (APuckNut)
data
eye 3
favorite 0
comment 0
I wanted to store my 2nd flexible spring sheet when not in use. The underside of the shelf is not used for anything, so I designed these parts to be printed in pairs and stuck on using four 3M Command strips.. They have a stopper at the back so you don't push the sheet all the way through. Mount the 1st one and then before removing the strips on the 2nd one, dry fit the part and mark the edge of the 2nd bracket on the face of the shelf with a pencil. This way you don't have to fight the sheet....
Topics: prusa, prusa_i3, Original_Prusa_i3_MK3, 3D Printer Accessories, thingiverse, Steel_sheet, stl,...
8
8.0
Apr 17, 2021
04/21
by
Grand Crock (grandcrock)
data
eye 8
favorite 0
comment 0
This is a new screen mount for prusa I3. Whith this mount you can turn your screen in any direction in the same way of a car mirror.
Topics: prusa, Prusa_I3_Bq, Prusai3, 3D Printer Parts, BQ_Prusa_i3_Hephestos, thingiverse, bq_hephestos,...
9
9.0
Jun 12, 2021
06/21
by
(vbuch)
data
eye 9
favorite 0
comment 0
Summary Prusa i3 Z-axis rod holder Use a 22mm bearing (8mm inside, 7mm height). Fit it in the designed hole. Stick the Z-axis rod in it. Stick the other rod in the other hole. Attach to the stock top cap and there's no more shaking.
Topics: thingiverse, Prusai3, prusa_i3, prusa_i3_rework, stl
6
6.0
Apr 20, 2021
04/21
by
cruise chen (cruise0)
data
eye 6
favorite 0
comment 0
This the Y-axis end stop for steel pursa i3, which can attach a dip switch with 2 * 3mm holes The legs of the Y-end stop also provide support for 8mm Y-axis rod
Topics: thingiverse, 3D Printer Parts, stl, prusa_i3_rework, prusa_i3, Prusa_i3_Steel
2
2.0
Jul 25, 2021
07/21
by
Devin Curtis (dirtsky)
data
eye 2
favorite 0
comment 0
I recently purchased an Orbiter Extruder kit and needed a mount for it. I currently use the BearExxa on my Bear Clone and I didn't want to really change too much from that design as it make things easy to disassemble when needing to change parts. So I came up with this simple mount for the Orbiter. The mount is a remix of the BearExxa Body and mounts to the original Bear x-carriage. Unfortunately you will lose the Filament sensor (I'd really like to redesign the body to where I could include...
Topics: prusa_i3_mk3, thingiverse, 3D Printer Extruders, Original_Prusa_i3_MK3, prusa_i3_mk2, prusa_i3,...
6
6.0
Mar 18, 2021
03/21
by
Alex ward (wardy89)
data
eye 6
favorite 0
comment 0
Reverse bowden IR Sensor Cover for the MK3s I have included 3 versions one for the PC4-M10 pass through connector and another for the PC4-M6 connector. I have now added a version for the PC4-M5 connector. ------------------------------------------------------------------------------------------------------------------------ Edit 19/2/19: I have added a M5 version. (I don't have an M5 fitting myself so if someone could test it and let me know that would be appreciated.)
Topics: prusa, thingiverse, prusa_i3_mk3s, 3D Printer Parts, stl, prusa_i3, prusa_i3_mk3
9
9.0
Jan 19, 2021
01/21
by
Andrew Long (aikiaviator)
data
eye 9
favorite 0
comment 0
I have attached links to a collection of items that I identified added significant value to my first printer purchase: a Prusa i3 Mk3. I was recently advised that I processed this incorrectly and cannot attach the files here but need to link them only. Everything here can be printed and helps improve the printers utility. Only item I modified was the Camera Holder and there is another there that would have been even better for my use. However I have linked them for your use....
Topics: 3D Printer Accessories, prusa_i3_mk3, thingiverse, Original_Prusa_i3_MK3, prusa_i3, stl
8
8.0
Jan 15, 2021
01/21
by
Lars Tillenkamp (neogeo78)
data
eye 8
favorite 0
comment 0
a simple adapter to fit standard brass/nylon lead screw nuts onto Josef's prusa i3 x-ends
Topics: thingiverse, stl, 3D Printer Parts, prusa_i3, Prusa_i3_Steel, prusa_i3_rework
10
10.0
Apr 21, 2021
04/21
by
Woj Sw (WojSW)
data
eye 10
favorite 0
comment 0
The easiest way to level your Z axis. Aditional tools aren't required. How to use: 1. Lift your Z axis. 2. Place the tool as shown at the foto. 3. Make shure that plastic adjoins to the frame and the gate. 4. If not: rotate your stepper motor a bit. Remember to hold the second one. 5. Else: Place tool on the opposite side of the frame and jump to the step 3. To be sure that your printer is calibrated properly iterate this process one or two times.
Topics: thingiverse, prusa, stl, Prusai3, 3D Printer Accessories, prusa_i3_rework, prusa_i3_hephestos,...
4
4.0
May 1, 2021
05/21
by
Aaron Carroll (Createbetter)
data
eye 4
favorite 0
comment 0
Fixes Thermistor wire failure: -Extended Y axis (heater bed) wire cover. -Prevents wiring from sagging and being pinched between bed and frame leading to premature Thermistor failure. Includes: Heater bed covers. -Both 8mm bore styles, and both standard bore styles Install: -Unplug printer. -Place printer on elevated surface to gain access from below. -Move Y axis all the way to rear slowly. -Remove only the two H2.5 screws nearest the cable. -Remove cover and replace with the new extended...
Topics: stl, prusa_i3_rework, prusa_i3, thingiverse, prusa_i3_mk3, 3D Printing
9
9.0
Jan 19, 2021
01/21
by
(Devezu)
data
eye 9
favorite 0
comment 0
Having weird issues with your bed leveling not quite working out very well? Use this to test it! This prints a 25x25mm square in the center of each grid square on your Prusa i3 MK2 or MK3 series printer, so you can see where exactly where the bed leveling is failing. This helped me a lot when diagnosing an issue where one side of the bed was much closer to the nozzle than the other; I hope it can help you fix the issues with your bed as well! This print is designed to be printed at a resolution...
Topics: prusa_i3_mk2_mmu, prusa_i3_mk3, Original_Prusa_i3_MK2, 3D Printing Tests, thingiverse,...
4
4.0
Apr 20, 2021
04/21
by
R (Mochery)
data
eye 4
favorite 0
comment 0
Got my hands on a Prusa Mk3 frame and wanted to adapt my Mk2.5 to fit it. Turns out there wasn't that much to change. The rest of the parts are stock Mk3 in the photo. Edit - Added optional x-motor mount with end-stop and mk3 end-idler.
Topics: thingiverse, 3D Printer Parts, stl, prusa_i3_mk3, prusa_i3, prusa_i3_mk2
