9
9.0
-
-
-
by
Fernando Castillo (c4sfer)
data
eye 9
favorite 0
comment 0
Based on a very cheap circuit found in ebay. You can purchase it at: http://www.ebay.es/itm/311692777561?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT No need ajustment, just plug and play. I glued the coil with hot glue but it is not a good idea, better use epoxy resin.
Topics: qi_wireless_charger, thingiverse, Qi_Charging, wireless_charger, wireless_charging, Samsung_Galaxy,...
9
9.0
data
eye 9
favorite 0
comment 0
This is very similar to my previous item: http://www.thingiverse.com/thing:1323471 This item is for iPhone 6s with case and wireless charging coil like this one: http://www.aliexpress.com/item/Portable-Qi-Standard-Smart-Wireless-Charging-Coil-Receiver-For-iPhone-5-5C-5S-Free-Shipping/32334325068.html The angle is changed from 15deg to 20deg backwards, the internal width is 74mm and thickness 10.5mm.
Topics: qi_charger, iPhone_stand, iphone_6, Mobile Phone, iphone, stl, wireless_charger, thingiverse,...
10
10.0
-
-
-
by
David Harlock (beta_ready)
data
eye 10
favorite 0
comment 0
This is a holding bracket designed to support a phone upright, or a small tablet sideways. It holds the generic circular Wireless Qi Chargers with space for connecting and routing a USB cable. **V9** has further cuts to reduce material use, although done in a way to improve prints through less bridging. Print time is now almost half that of previous versions. The Qi Charger is centred at 65mm above the stands - so for optimum results the phone will be around twice that length if the internal...
Topics: thingiverse, qi_charger, Stand, Gadgets, Support, inductive, Phone, Wireless, Mobile, Angled, stl,...
6
6.0
-
-
-
by
Lachlan (lokthelok)
data
eye 6
favorite 0
comment 0
A small footprint stand for your Mophie Qi Wireless Charger and Apple Watch Charger. I didn't like the large footprint of many existing models and also couldn't find much that would suit the Mophie base. An advantage of this for the watch is that the watch band can be buckled or unbuckled when placing or removing watch from charger. The height for the watch is ok for my band, but may be too short for longer bands. I may revise the model with a taller riser option.
Topics: thingiverse, apple_watch, qi_charger, android_charger, apple_watch_charger, wireless_charger,...
8
8.0
-
-
-
by
Tomas Franzen (tomasf)
data
eye 8
favorite 0
comment 0
Trio Dock is a combined charger dock for iPhone X, Apple Watch and the AirPods case. Perfect for nightstands! The iPhone indentation is somewhat enlarged to allow for use with cases. It probably also works okay with iPhone 8. The watch charger is made for the 42 mm version, but I'm guessing 38 mm works okay too. You'll need: * A compatible Qi charger. See [my previous iPhone X dock](https://www.thingiverse.com/thing:2654828) * A USB to Lightning cable for the AirPods * An Apple Watch charger
Topics: AirPods, charger, iPhoneX, qi_charger, applewatch, thingiverse, Mobile Phone, Airpods_charger,...
8
8.0
-
-
-
by
Mark Petzold (basilfawlty)
data
eye 8
favorite 0
comment 0
This is a stand for the terrific IKEA RÄLLEN wireless charger. I made this one because the others available were massive and I was looking for something that would fit the iPhone 8 (sans case) perfectly. The RÄLLEN charger has an inner disk (the charging unit) that pops out of the housing. You don't need the outer ring or the rubber gasket. Just pop the charging disk into the hole and run the cable through the hole and channel in the back. Let me know what you think!
Topics: RÄ, LLEN, qi_charger, qi_wireless_charger, thingiverse, Mobile Phone, IKEA_Hack, iphone_8,...
6
6.0
data
eye 6
favorite 0
comment 0
Designed to house a round 7cm QI charger and fit a Samsung Galaxy S7 both vertical and horizontal even with a protector. Distance between the upper prongs are 74mm so it should work with any phone longer and/or slimmer than that. The stand also works if you prefer to charge your phone by plugging it in. I bought my QI pad from ebay, its not sold anymore but it looks like this one https://www.banggood.com/Q5-Wireless-Charger-Pad-Qi-Standard-Transmitter-White-Chassis-For-Phone-p-974659.html The...
Topics: qi_charger, office, thingiverse, Office, Samsung, stand, Phone_Stand, stl
5
5.0
-
-
-
by
Tetiana Bulgakova (TanyaAkinora)
data
eye 5
favorite 0
comment 0
I created a new Qi charger pad design in the form of a Spiderweb. Wireless charger transmitter as in the photo. Such a module can be viewed here: http://u.to/SgfZEg The base and cover are printed with ABS plastic. The cover is printed with the change of the filament on the 8th layer. I made the second option for straight PSB. Such a module can be viewed here: http://u.to/YEvZEg Spiderweb 3D printed Qi charger pad is designed for the Airiola wireless charged battery for the wireless mouse....
Topics: 3dprintable, fusion_360, qi_charger, qi_wireless_charger, airiola, spiderweb, thingiverse,...
5
5.0
-
-
-
by
David Manning (dykm2)
data
eye 5
favorite 0
comment 0
Print in one piece with the large flat side against your print bed. There are some small chamfered overhangs in this print and some small bridges. The snap fits worked perfect on my printer. But snap fits are pretty high tolerance. You may need to adjust your post processing or file to fit. You will also need: Suction base off a generic car holder with 4 claw type connection. See photos attached. Suction base I used (stiffer than the swan neck I used before)...
Topics: Charging_dock, qi_wireless_charger, phone_holder, SAMSUNG_GALAXY_S6, qi_charger, thingiverse, stl,...
8
8.0
-
-
-
by
Adafruit Industries (adafruit)
data
eye 8
favorite 0
comment 0
https://www.youtube.com/watch?v=Y29WEIzUSTo Read the full guide on: https://learn.adafruit.com/portable-qi-charger/ In this project, we'll take a look at building a portable Qi charger. This universal standard works with many devices and can still charge non Qi enabled devices via the USB port on the side!
Topics: Wireless, Electronics, qi_charger, qi_wireless_charger, thingiverse, wireless_charger, diy, iphone,...
10
10.0
-
-
-
by
Jaroslaw P. (Jarek_P)
data
eye 10
favorite 0
comment 0
Wireless desktop QI charger, designed for Samsung S6, but should be ok for many others with similar dimensions. It needs this module of QI charger: https://www.aliexpress.com/item/DC-5V-Qi-Standard-Wireless-Phone-Charger-PCBA-Circuit-Board-With-Coil-Wireless-Charging-Micro-USB/32786304209.html Parts should be printed in PLA without any support (necessary supports are included in the project), but I recommend to use good cooling during printing. Multicolor effect visible on the photo I obtained...
Topics: 3D_printing, wireless_charger, thingiverse, 3D Printing, qi_wireless_charger, Charging_dock, stl,...
12
12
-
-
-
by
Mattias (MrSnoWie)
data
eye 12
favorite 0
comment 0
Made a small box to house a little QI wireless mobile phone charger. I bought this item on ebay and the case and STL's are made for that one. http://www.ebay.com/itm/121698735542?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Topics: qi_charger, stl, iphone, mobile, samsung, QI, qi_wireless_charger, Sweden, mobiltelefon, phone,...
4
4.0
-
-
-
by
Gabriel Grais (Gabgra11)
data
eye 4
favorite 0
comment 0
I designed this stand to hold my KoolPad wireless charger. It also acts as a micro usb charging stand when the KoolPad charger is removed. There is a slot to route the cable to the KoolPad charger in the bottom.
Topics: iphone_x, qi_charger, stand, samsung_galaxy_s9, samsung, galaxy_s8, Gadgets, dock, Wireless, stl,...
7
7.0
-
-
-
by
Ricky A (justbcoolr)
data
eye 7
favorite 0
comment 0
A replacement for the Tesla Model 3 phone charging pad with cut-outs for a pair of thin Qi wireless chargers. This model is a work in progress, and you are more than welcome to download the design file and make changes! If you do so, please link it to this post per the CC license. The Qi wireless charger I designed for was: https://www.amazon.com/gp/product/B075Q97P9T/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 The Fusion 360 model in case you would like to design for a different wireless...
Topics: Tesla, Wireless Charger, qi_charger, qi_wireless_charger, thingiverse, Charger Pad, 3D Printing,...
7
7.0
-
-
-
by
John Casey (buildchimp)
data
eye 7
favorite 0
comment 0
This is a phone charging bracket for use with this [CHOETECH T511](http://a.co/8rTYuTP) Qi charge pad. I've designed it to fit into the little cubby at the front of a 2014 Prius V center console (just below the 12V socket). It prints with two side panels, one integrated into the body, and one separate, which needs to be hot glued on. I haven't put the miles on this yet to see whether the side panels are critical to keep the phone from slipping, but this should keep everything aligned pretty...
Topics: qi_charger, phone, car_charger, thingiverse, prius, stl, Mobile Phone, qi_wireless_charger, charger
11
11
-
-
-
by
Martin Beedub (beedub)
data
eye 11
favorite 0
comment 0
This is a case + universal mount + QI charger for the Samsung S7 edge. The mount clips into my other purchased mounts for windscreen and bike. The QI charger is a new thin waterproof 69mmx3.69mm model: https://www.amazon.co.uk/gp/product/B01N99BV7K/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 I made the mistake of printing this in rigid PLA first but one of the corners snapped off when inserting the phone (see photo) but the remaining corner and top edge hold the phone tightly. I've since...
Topics: stl, Mobile Phone, phone, qi_charger, mount, universal, thingiverse
9
9.0
-
-
-
by
Jean-Christophe Heger (jcheger)
data
eye 9
favorite 0
comment 0
Yet another QI charger, specific for Samsung Galaxy S7. Fits the low cost Chinese chargers (70x10mm).
Topics: thingiverse, qi_charger, samsung_galaxy_s7, galaxy_s7, Office, qi_wireless_charger, stl
4
4.0
-
-
-
by
Eunchan Park (EunchanPark)
data
eye 4
favorite 0
comment 0
I used these wireless charger http://s.click.aliexpress.com/e/cCiv5eTm (my wireless pad is an old version of it. It probably fits for this new version) and this is wireless for the iphone http://s.click.aliexpress.com/e/cT0MPgq8 I am using Samsung Note8. it is perfectly working.
Topics: stl, wireless_charger, qi_charger, Mobile Phone, thingiverse, Wireless
4
4.0
-
-
-
by
Aivaras (AS_Motion_Lab)
data
eye 4
favorite 0
comment 0
This is a dash phone holder with a built-in Qi charger for a **Lexus IS220/IS250/IS350**. It's a springy compliant mechanism which clicks into your dash without damaging anything, and is easily removable with no traces! It's strong and supportive. I added a piece of transparent tape to the vent plastic where the mount rubs so it doesn't leave any scratches. The aim of the grille is compromised slightly up/down, but left/right is unaffected. It comes in 2 parts - the dash part and the phone...
Topics: Automotive, phone mount, Xiaomi Mix 2S, dash charger, stl, IS250, Qi charger, Lexus, Wireless...
2
2.0
data
eye 2
favorite 0
comment 0
A phone stand for the IKEA Wireless charger Rällen or Nordmärke. Add some glue for the support leg, alternatively scale it up to 101-105% for a snug fit. This was Designed with an iPhone 12 Pro Max with a thin case in purpose, should work for anything similar size and a bit smaller phones.
Topics: ikea charger, Phone_Stand, rä, llen, smartphone, wireless_charger, phone_holder,...
3
3.0
-
-
-
by
Fred Feuerstein (Uzhul)
data
eye 3
favorite 0
comment 0
This is an adapter to fit the Ikea Nordmärge QI-Charger. It fits into the original model from Hairing: https://www.thingiverse.com/thing:4516696 Print upside down.
Topics: apple watch, thingiverse, nordmaerke, Mobile Phone, nordmä, rke, iphone, AirPods pro, ikea,...
3
3.0
-
-
-
by
Félix García (STIG_)
data
eye 3
favorite 0
comment 0
I have had the Airdock since 2014. It worked great on my car for many many years, and now is been used inside the house. I have design this mount, to repurpose the Airdock as a desk Qi charger for my Google Pixel Buds. It has magnetic pull, as well as plenty grip from the Airdock surface. So its not going anywhere. Simple and effective. *This is mk1. All you need to do is remove all the hardware from the rear of the Airdock and drop it into this stand. I will eventually make a mk2 version where...
Topics: repair, google pixel buds, thingiverse, qi charger, stl, bud, Electronics, airdock, air dock,...
4
4.0
-
-
-
by
Thilo Siewert (thilo_s)
data
eye 4
favorite 0
comment 0
I needed a cover for my PowerPort Qi Charger, because the LEDs are to bright for the bedroom. The cover has a inner diameter of 68.5 mm and outer 69.5 mm. The bottom hole is 58 mm wide and the USB cut out is 11 mm wide and 6 mm high. It fits tightly and the LEDs are nearly invisible.
Topics: qi_charger, stl, wireless_charging, qi_cover, qi_wireless_charger, thingiverse, Other,...
4
4.0
-
-
-
by
Can Iraktan (Phenomen)
data
eye 4
favorite 0
comment 0
I haven't print yet. I will plan modelling back covers to coil and circuit housings. The charger uses only coil and circuit, hoising connects inside for cables (little soldering ;) ). I did modelled the coil housing right side because the receiver not charging the center. I try several points with multimeter current section and find the best powered point. Maybe sticks a nfc tag tag to stand and some tricks for phone ;). I will share photos after print but if you print before me please share...
Topics: thingiverse, wireless_charger, Samsung_Galaxy_note_4, Stand, Note4, Volume_Booster, stl, note_4,...
4
4.0
data
eye 4
favorite 0
comment 0
Summary Holds your S5 in place while it charges, I use this in my car.
Topics: galaxy_s5, wireless_charging, galaxy_s, thingiverse, qi, nexus, qi_charger, galaxy, stl
2
2.0
-
-
-
by
Lukas Schomaker (Schokas)
data
eye 2
favorite 0
comment 0
I mixed the Apfelfunk Centralstation with the Anker WirlessCharging dock. I hope this file is ok. I tried self to Print - and all thing are right!
Topics: airpods_holder, thingiverse, Station, iPhone 9, AirPods_Pro, Gadgets, airspodsPro, iPhone_stand,...
3
3.0
-
-
-
by
Chris Hawkins (computerstar2000)
data
eye 3
favorite 0
comment 0
I, like all of you I bet, have tons of USB power banks laying around, but even my largest, a 20,000mah pack died after a few days away camping just charging my Apple Watch and iPhone. I wanted something that would last MUCH longer and be more versatile at the same time. As this is the 21st century, we have the Internet which allows you to harness the brain of people with skills you don't poses, this means following some online guides of how to DIY the battery side of things. I then designed...
Topics: stl, apple_watch, qi_wireless_charger, diy_powerbank, thingiverse, diy, Survival, apple watch...
5
5.0
-
-
-
by
phil ch (zaijian)
data
eye 5
favorite 0
comment 0
Modular Charging Cradle system, designed to keep your device and wireless charging pad exactly aligned. Customize your own base and top parts to fit any charging pad and device. [Customizable base model](https://www.tinkercad.com/things/0pxMffCpVku) [Customizable top model](https://www.tinkercad.com/things/b0TfkS0LfJp) [Complete example model designed for a CHOETECH T513 and a Samsung S8 Active](https://www.tinkercad.com/things/hmuizfdtPwR)
Topics: Charging_dock, qi_charger, thingiverse, stl, phone, Mobile Phone, charger
5
5.0
-
-
-
by
Félix García (STIG_)
data
eye 5
favorite 0
comment 0
Modeled using the measurements found on the Google play store. Intended to be used as a mock up while modeling stuff for this device. ** Not 100% perfect, as i used online images after calibrating for its size, but its very very close and i am comfortable sharing it.
Topics: Pixel Stand, Pixel 3, Pixel charger, Pixel qi charger, thingiverse, Pixel 3 charger, Google, Pixel,...
4
4.0
-
-
-
by
Thomas Haugen (3dprintviking)
data
eye 4
favorite 0
comment 0
Works for most phones, but was originally designed for my Samsung S9+ with and without a case. It's designed around the Samsung Wireless Mini Qi charger which you can find here: https://amzn.to/2EglW4W I've left a notch at the top, so you can see when it's charging or not. The stand is pretty stable and looks pretty good in my opinion. Happy printing guys! 3DPrintViking Instagram: https://instagram.com/3dprintviking Web: https://3dprintviking.com
Topics: mobile_phone_stand, qi_charger, Mobile Phone, thingiverse, mobile_phone_holder,...
4
4.0
-
-
-
by
Michael Riebel (michael_riebel)
data
eye 4
favorite 0
comment 0
Hello, this weekend I build a QI charger for Mobile Phones for our Peugeot 307SW. It is still work in Progress. But I think it is pretty cool and works. Should fit any QI Loader with not more that 8cm in width. All designed in Tinkercad. At the moment the edges need to be a little rounded to fit the ashtray slot.
Topics: qi_charger, stl, ashtray, Peugeot_307, thingiverse, Mobile Phone
3
3.0
-
-
-
by
Jason Graham (stage_monkey)
data
eye 3
favorite 0
comment 0
A quick model I threw together so that I could make sure my iphone was actually centered to the QI so that it would charge correctly. I made it so the phone sits up at a 45 degree angle so that I could see it better from my pillow. I don't recall the QI charger brand...it was a gift. Also, I take my case off to charge (thanks pop-socket!) so the stand fits the bare phone. I have some updates I might make to it based on my usage. I may also make varients of it to fit a wider range of...
Topics: iphone_xs_max, Mobile Phone, iPhone_XS_Max_holder, qi_stand, iPhone_stand, thingiverse, stl,...
3
3.0
-
-
-
by
Øyvind Aardal (aardalo)
data
eye 3
favorite 0
comment 0
The IKEA LIVBOJ Qi charger is perfect for your nightstand but combined with this phone stand and the LILLHULT cable you can view the sceen without having to lift the phone, and you can charge the phone without attaching a cable. The phone can be placed in landscape or portrait mode. There is a small container for example for storing rings or other small items in the back. The cable fits the slot in the bottom, and the LIVBOJ charger and the plug fits perfectly in the slot. This stand is...
Topics: stl, qi_wireless_charger, cell_phone_stand, thingiverse, ikea, Mobile Phone, qi_charger, cell
3
3.0
-
-
-
by
Sebastien Adamowicz (Adamow)
data
eye 3
favorite 0
comment 0
This is the new version of a design I already published ([$4 Qi wireless charger for car](https://www.thingiverse.com/thing:3328875)). Just a revamp of the object. It's better designed in my opinion and it adapts to my new iPhone 12 Pro smartphone with a Rhinoshield case. It uses the same Qi charger component I bought years ago at [GearBest](https://www.gearbest.com/chargers-cables/pp_662438.html). You only need a bit of glue to secure the hands and foot, and a M3 screw to secure the hook that...
Topics: thingiverse, qi_charger, stl, wireless_charger, automobile, mobile_phone_holder, car, iphone,...
4
4.0
-
-
-
by
Martin Straub (d4Rk1337)
data
eye 4
favorite 0
comment 0
Super Mario Bros. Charger for iPhone 12 (Pro) w/ case, Air Pods Pro and Apple Watch. I cut everything into pieces, to be able to fit them on the printer and also to avoid needing supports on any visible surfaces. So just glued everything together. TODO: Bottom plate is not yet there, not sure how I mount it (just glue it?)
Topics: AirPods, qi_charger, DIY, 8bit, applewatch, thingiverse, mario, applewatch_charger, Airpods_Stand,...
3
3.0
-
-
-
by
ffeJ Rxx (ffejrxx)
data
eye 3
favorite 0
comment 0
DIY QI Charger Phone Stand for the green 1.3in sq qi charger boards similar to this https://www.ebay.com/itm/115-49mm-Qi-Wireless-Charger-PCBA-Circuit-Board-With-Charging-Coil-Wireless/333707268234 no glue necessary may need to clip the spheres to hold the board in place qi disc can slide in the void for it bi color led goes in the ledge to hold the phone most pla/abs are clear enough to show the led color through the plastic edit: tall ver is for 6.5in tall phones orig is for 4-5in phones
Topics: qi_charger, stl, smartphone_stand, qi_wireless_charger, Phone_Stand, Mobile Phone, thingiverse
3
3.0
-
-
-
by
Thomas Rufer (Orngrimm)
data
eye 3
favorite 0
comment 0
A cradle for a Xiaomi Mi9 to be charged with a sqare QI wireless charger. Prevents phone from slipping off. Charging pad chan be oriented with cable sticking out top, left, right.
Topics: qi_charger, mi9, stl, qi_wireless_charger, xiaomi_mi9, Mobile Phone, thingiverse, dock, xiaomi,...
4
4.0
-
-
-
by
Jurassic73 (jurassic73)
data
eye 4
favorite 0
comment 0
I build this qi charger so I could charge while viewing on my night stand. I uploaded two sets of stls. One is the original you'd use if laying on your right side while viewing. Those named with 'left' are the opposite(what you'd print if laying on your left). Gap for USB-C headphones. There are two versions of the base. One with a ten degree tilt back, which works better for me since this sits on my night stand which is level with my bed(better viewing angle). The other is straight up,...
Topics: thingiverse, Phone_Stand, qi_wireless_charger, Mobile Phone, phonecharger, stl, qi_charger,...
2
2.0
-
-
-
by
Simon Tian (Simon_Says_)
data
eye 2
favorite 0
comment 0
Recommend printing in horizontal direction enhancing curvature details.
Topics: wireless_charger, thingiverse, qi_charger, wireless_charging, Phone stand, qi_wireless_charger,...
3
3.0
-
-
-
by
Avi Code (avishekcode)
data
eye 3
favorite 0
comment 0
Improved Wireless Charging Stand for Phones (With f3d for easy customization) Improvements: Made a better, more stable and stronger base Redesigned the base to insert 5.8mm Hex Allen keys as weights I had many of these Allen keys as they come with a lot of furnitures. If you have any other size or a different metal object, please feel free to change it in the f3d file, before you print. I used an angle grinder to cut the allen keys to size. Also, it should be easy to change the dimensions a bit...
Topics: wireless_charger, car_charger, Mobile Phone, thingiverse, Fast_charge, qi_charger, stl
4
4.0
-
-
-
by
Jannik Pfeiffer (JNKPFR)
data
eye 4
favorite 0
comment 0
Charging dock for P30/P30Pro with ikea insert wireless charger (NORDMÄRKE) and charger for Samsung Galaxy Gear s3
Topics: Wireless, qi_charger, Samsung_gear_s3, stl, gearS3, huawei_p30_pro, iphone_dock, huawei_p30,...
3
3.0
-
-
-
by
Lukas Tichanek (ltfoto)
data
eye 3
favorite 0
comment 0
This item is designed and tested for Iphone 12mini and 100mm diametre qi wireless charger. Included pics are captured with first version of this holder, then i maked few upgrades and changes. Now everything work well.
Topics: Horizontal, qi_charger, 12mini, vertical, Wireless, stl, iphone, holder, qi_wireless_charger,...
3
3.0
data
eye 3
favorite 0
comment 0
Phone stand for Samsung S9 to use with Belkin BoostUP Qi charger. The slot for the phone is 74x15 mm so it should work with any phone within those limits.
Topics: thingiverse, belkin, Samsung_S9, stl, qi_charger, Phone_Stand, Samsung, Belkin_Boost, Mobile Phone
3
3.0
-
-
-
by
Leonard Lee (leonardlee)
data
eye 3
favorite 0
comment 0
Use an IKEA LIVBOJ to create a Qi-certified/compatible wireless phone charging stand that supports both portrait and landscape orientations! No supports are required. If the dimensions don't work with your phone, you can use the .f3d (Fusion 360) file to remix the design to meet your needs. LIVBOJ ($5) white: https://www.ikea.com/us/en/p/livboj-wireless-charger-white-00457495/ black: https://www.ikea.com/us/en/p/livboj-wireless-charger-black-90447058/ So far, tested on: * Pixel 3 XL (in...
Topics: Phone_Stand, wireless_charger, ikea, Samsung_Galaxy, thingiverse, qi_charger, iphone, Mobile Phone,...
12
12
-
-
-
by
Maarten ter Mors (morsm)
data
eye 12
favorite 0
comment 0
An Apple-branded cover for a small Qi charger that I bought here: Qi Charger, 7 euro from allekabels.nl : https://www.allekabels.nl/draadloos-opladen/11543/1350614/qi-oplader-700-ma.html The little charger is entirely embedded INSIDE the print. There are two ways to do this, please check under Print Settings. There are gaps for the (micro USB) power plug and for the status LED (blue when charging, red when no phone placed or not positioned correctly).
Topics: qi_charger, thingiverse, apple, Mobile Phone, iphone, stl
5
5.0
-
-
-
by
Dad And Daughter (dadanddaughter)
data
eye 5
favorite 0
comment 0
I combined the Qi cradle with the Ticwatch Pro stand, to make it one unit. The Qi charger is one of the cheap ones, 70mm diameter by 10mm thick. The Qi charger works well with my Samsung Galaxy A5 (2017) with an added Qi receiver. It should be printed tilted over 90 degrees using the OBJ file, and will require supports to print. The combination was done in Win 10 3D Builder. It took 19:55 hrs to print, with the indicated print settings
Topics: thingiverse, ticwatch_pro, qi_charger, SAMSUNG_GALAXY_S5, Mobile Phone, stand, stl
6
6.0
-
-
-
by
Cereyanli Seyler (cereyanli)
data
eye 6
favorite 0
comment 0
I needed a stand/dock which an Apple Watch , Apple AirPods and iPhone can be charged same-time and neatly Thanks @KacperL and @spincrisis designs where I mixed them and realize this nice charging stand for my wife's nightstand This stand uses standard Apple Watch charger, Standart lightning charger for AirPods and IKEA Rallen for iPhone wireless charging.
Topics: Apple_AirPod, rallen, ikea, apple_watch, Apple_Watch_Dock, qi_wireless_charger, Apple_Watch_Stand,...
10
10.0
-
-
-
by
Kevin Pettersson (Diymaster1)
data
eye 10
favorite 0
comment 0
This is a DIY Qi charger case that I made for my new iPhone x. It is really compact and minimal in design. It utilizes a small and cheap qi charging circuit bought from eBay for less than 3 USD and a micro USB cable for 1 USD. See link down below. The installation process is really simple, 1 Firstly take away all the support material and sand everything down if you want to paint it. 2. Desolder the led and mark its orientation so that you don't mix the colors up. 2 Then use really small screws...
Topics: Electronics, qi_charger, qi_wireless_charger, Qi_Charging, thingiverse, iphone_x, stl,...
7
7.0
-
-
-
by
Heiko Schultz (PredatorJr)
data
eye 7
favorite 0
comment 0
got another QI charger circuit from aliexpress took that electronics, measured the size to get a model of it and an idea how to use it with a beautiful print the SpaceX landing platform is one of those models I first thought about There are several of these chargers, that one I used here: https://de.aliexpress.com/item/Hohe-Qualit-t-Standard-10-watt-Qi-Schnelle-Drahtlose-Ladeger-t-Modul-Sender-PCBA-Platine-Spule/32958698546.html you need to export the model to STL at once or comment the...
Topics: openscad, aerospace, stl, thingiverse, Electronics, qi_charger
8
8.0
-
-
-
by
Chris Bills (Gfghdj)
data
eye 8
favorite 0
comment 0
This is a phone stand which also fits a Sumsung wireless charging pad to allow QI charging on the stand. The stand prints in two parts which simply push together. Should work well with most smartphones, tested with the Samsung S5, S7 and Note 4.
Topics: Mobile Phone, thingiverse, stl, smartphone, Phone_Stand, smartphone_holder, qi_charger
