2
2.0
May 1, 2021
05/21
by
no way (reloxx)
data
eye 2
favorite 0
comment 0
Remix of https://www.thingiverse.com/thing:4625235 (thingish1t is unable to search for a thing id to connect the remix) This is a controller adapter/stand for the china quest 2 stand (https://aliexpress.com/item/1005001658888271.html). The orginal controller holder require alot of space. . This adapter let them be stuck upwards and safe space. Its spread wider for silicon covers. Its not perfect, but works. Here is the tinkercad link if you want to edit it:...
Topics: stl, oculus_quest_2_Stand, Quest_2_Controller, Oculus, mount, Oculus_Quest_2_Mount, Quest_2,...
1
1.0
Apr 20, 2022
04/22
by
Sascha W. (Localhorst86)
data
eye 1
favorite 0
comment 0
Remix from https://www.thingiverse.com/thing:4724769 and https://www.thingiverse.com/thing:5142847. Grip cup has been upscaled to 108% to fit my silicone grip covers, controller can easily be placed and removed from the grip. Print orientation: Gear Section down. I used a support blocker in cura to prevent the gears getting supported, i got a lot cleaner results that way.
Topics: oculus_quest_2, thingiverse, Meta_quest_2, Quest_2, Video Games, stl, vrgun
2
2.0
Jun 11, 2021
06/21
by
seum jeong (toyxyz123)
data
eye 2
favorite 0
comment 0
Topics: oculus_quest_2, quest 2, thingiverse, Other, stl
1
1.0
Apr 19, 2022
04/22
by
Chuang Chiawei (Kelvin226)
data
eye 1
favorite 0
comment 0
Filament : PLA Layer height : 0.2mm Infill : 30%~40%
Topics: thingiverse, Oculus Quest 2, Quest 2, stl, Hobby
2
2.0
Jan 19, 2022
01/22
by
Cole Anthony (Eagle5432)
data
eye 2
favorite 0
comment 0
Remixed from V2 non slip version - this version is built so that the two adjusters on the default head strap can be tightened more than the previous version allowed (more ideal for smaller heads, or if sharing with those with smaller heads). Saved at an angle that allows for less support material (supports still required)
Topics: thingiverse, Video Games, oculus_quest_2, stl, Quest_2
2
2.0
May 1, 2021
05/21
by
Ceaser Larry (ceaser)
data
eye 2
favorite 0
comment 0
This is an Oculus Quest 2 adapter for the ELECJET Magnetic USB C connector. The USB portion of the connector would fall out when unplugging or when using the Oculus Link cable. This adapter will allow you to use the stickers included with the product by filling in the gap caused by the headset's curvature. Amazon Link for the ELECJET Magnetic USB C Connector...
Topics: stl, Quest_2, oculus_quest_2, adapter, thingiverse, Other
3
3.0
Jan 16, 2021
01/21
by
michele pontolillo (pontolix)
data
eye 3
favorite 0
comment 0
My version of elite strap that no need support to print. The thikness is 1.8 mm (three walls with my 0.6 nozzle) to offer some flexibility. The two separate pieces must to be glued in place (view images). Finally i've glued foam internally. It fits perfetctly on my head. Good print!
Topics: Video Games, thingiverse, oculus_quest_2, Quest_2, stl
2
2.0
Jan 7, 2021
01/21
by
Dennis S. Jacobsen (Anarasha)
data
eye 2
favorite 0
comment 0
Obviously this is an Elite Strap knockoff :p This uses one part from the original strap, but it will not be damaged so you can revert relatively easily if you dislike it ___________________ Edit 1: Now includes the Fusion file Edit 2: Small changes(made the speaker cap a bit thicker, made the screw longer, made the grip on the screw more comfortable). Now also includes the STEP file ___________________ I wasn't quite satisfied with the existing Elite Strap DIY models on here as I wasn't able to...
Topics: stl, Quest_2_strap, Elite_strap, VirtualReality, Oculus quest 2, Gadgets, thingiverse, Quest 2,...
3
3.0
Jan 4, 2021
01/21
by
Lerrick Salas (sanlaki)
data
eye 3
favorite 0
comment 0
Sanlaki ping pong paddle for Oculus Quest 2. Use velcro to secure controllers. Use screw to lock the two pieces together.
Topics: vr paddle, stl, quest 2 vr accessory, quest 2 vr paddle, quest 2 paddle, Toy & Game...
4
4.0
Jun 10, 2021
06/21
by
Lan Roth (lanroth)
data
eye 4
favorite 0
comment 0
I lowered the height so it'd fit in my [Bibo2](https://www.ourbibo.com/) printer. It works great. I used PLA and an infill of 40% Thanks to [rbrome](https://www.thingiverse.com/rbrome/designs), the original designer :-) Copied from [the original Thingiverse](https://www.thingiverse.com/thing:4840708) description: ## Summary This stand for the Oculus Quest 2 VR headset and controllers conserves space by orienting things vertically in a tree configuration. It also keeps the controllers in an...
Topics: oculus_quest_2, Oculus, oculus_quest_2_Stand, Quest_2, Video Games, thingiverse, stand, stl
3
3.0
Mar 15, 2021
03/21
by
Juan Gonzalo Garcia Cusi (Muthinor)
data
eye 3
favorite 0
comment 0
This is a remix of the Control. The only thing that I've done is change the STL into a STEP or Solid model for easier handling in CAD programs. Thanks to @stevesch for the original Scans. This couldn't have been made without him. The STL file is the same one Stevesch had on his upload. I only use it here too so thingivese allows me to upload this.
Topics: thingiverse, quest, quest 2, Accessories, oculus, stl, oculus_quest_2
1
1.0
Dec 14, 2021
12/21
by
Desibot! (WaveSupportApparatus)
data
eye 1
favorite 0
comment 0
# Important compatibility note # This stock design is a proof-of-concept that was built to be compatible with only one game: *Hotdogs, Horseshoes, and Hand Grenades* (*H3VR*). The yaw and pitch of guns in VR differs between games, and can even be different for different guns in the same game. Because this stock is not adjustable, it may not match up to the angles that guns are held at in other games. # About the Detour gunstock # The Detour gunstock for the Quest 2 (clever wordplay ha ha) was...
Topics: stl, thingiverse, oculus_quest_2, Video Games, gunstock, Quest_2
1
1.0
Nov 8, 2021
11/21
by
Tony Verhoeven (tverhoeven)
data
eye 1
favorite 0
comment 0
This is a remix of Crispy3DPrints' dock. The Ender 3 Pro build plate does not fit. So I split it in half and added holes for pins to combine the two halves.
Topics: stl, Oculus, oculus_quest_2, thingiverse, 3D Printing, Quest_2
3
3.0
Jan 9, 2021
01/21
by
Miguel Piedrahita (miguelpie)
data
eye 3
favorite 0
comment 0
This is a remix of the excellent design "Oculus Quest 2 Elite Strap_V2_NAVIDA DESIGN", here: https://www.thingiverse.com/thing:4630780. I tested several designs from Thingiverse, and this was my favorite thanks to its simplicity and its comfort. It's a big improvement in comfort from the stock strap! The main change I made was to include an integrated holder for a 5000mAh power bank. I also modified the tabs to hold the strap more reliably than the original design. The power bank this...
Topics: Oculus, quest, thingiverse, stl, oculus_quest_2_strap, oculus_quest, Gadgets, oculus_quest_2,...
2
2.0
Jan 18, 2022
01/22
by
(Luke321)
data
eye 2
favorite 0
comment 0
I remixed the original design to avoid the clamps at the top. To secure the Oculus Quest 2 controllers in the grips, I opted for a screwable cover at the bottem that wedges in the grip cords. Prints need support and you will need 2 M3 screws per grip between 10-14 mm long.
Topics: Oculus quest 2, thingiverse, Quest 2, Beat Saber, Games, stl
2
2.0
May 1, 2021
05/21
by
Noh Yeonoh (ChamKyoYuk)
data
eye 2
favorite 0
comment 0
This model is not tested in real. Therefore, this model might be not fit. This model requires a 1.5m hook-and-loop fastener. You should cut the hook-and-loop fastener to 5pices. 3 for the battery - mount, 2 for the mount - strap. The battery must be mounted upwards just like the picture.
Topics: stl, Hobby, Oculus_Quest_2_Mount, oculus_quest_2, thingiverse
1
1.0
May 1, 2021
05/21
by
Eric Van Feggelen (MrFex)
data
eye 1
favorite 0
comment 0
This one should fit the Halo Strap nicely.
Topics: stl, Toys & Games, Oculus, Quest_2, oculus_quest_2, thingiverse
5
5.0
Jan 6, 2021
01/21
by
Zen Magnets (zenmagnets)
data
eye 5
favorite 0
comment 0
V2 of my battery counterweight for the Oculus Quest 2 Elite Strap, more secure and doesn't require velcro. The clips mechanically attach to a battery cage. This mod will triple your battery life to about 6 hours, and the counterweight will vastly increase comfort by taking pressure off your face. Overall cost should be about $25 (~$20 for battery, ~$5 for cable) The battery chosen was the Aukey PB-N83 (Basix Mini) 10000mah, not just for it's ideal counterweight mass, but the uncommon...
Topics: Oculus, stl, Counterweight, oculus_quest_2, Oculus_Quest2, diy, Quest_2, thingiverse,...
0
0.0
Apr 20, 2022
04/22
by
Russell Wong (rpwong)
data
eye 0
favorite 0
comment 0
It's a remix of a remix! I printed the [Better Oculus Quest 2 Magnetic Lens Adapter](https://www.thingiverse.com/thing:4781759) by HaroldHyrax, but the magnets I have didn't fit well. Rather than resizing the holes, I decided to add a peg to the base that slides into the hole in the top piece. Then I found a remix by [seethebridges](https://www.thingiverse.com/thing:4630689) that does exactly what I was thinking. However, that was based on the [original...
Topics: oculus_quest_2, thingiverse, Quest_2, Oculus, Video Games, stl
1
1.0
Apr 20, 2022
04/22
by
Billy Craig (Dyingwolfwood123)
data
eye 1
favorite 0
comment 0
Remixed this to fit on the smaller bed of the Ender 3. I accomplished this by bending the strap up at a ~35 degree angle. I don't know if this is going to work yet. I have a few prints in the queue ahead of this, but I'll let you know how it goes once I get to it. I thought I'd post it up now in case anyone else wanted to take a crack at it.
Topics: oculus_quest_2, thingiverse, Quest_2, Oculus, Video Games, stl
1
1.0
Apr 19, 2022
04/22
by
Russell Wong (rpwong)
data
eye 1
favorite 0
comment 0
This strap lock works with thatdude902's [knuckle-style TPU strap](https://www.thingiverse.com/thing:4625898) for the Oculus Quest 2 controllers. It enables you to quickly tighten or loosen the knuckle strap, and holds it in place while you're using the controllers. The lock clips onto the wrist cord and holds the knuckle strap in place through friction. After you tighten it, you can slide the cord's plastic strap lock up against it to really lock everything in place. My strap lock's holes are...
Topics: oculus_quest_2, thingiverse, Quest_2, Oculus, Video Games, stl
2
2.0
Mar 16, 2021
03/21
by
(aaronlie)
data
eye 2
favorite 0
comment 0
Mount your Quest 2 to a monitor arm so that when developing in VR, you don't have to take it on and off your head all day. Based on https://twitter.com/dannyaroslavski/status/1351554673853964291. It allows for easy connection and disconnection without having to modify or harm the headset. M4 screws, ~10mm, with nuts, are required to mount to the VESA monitor arm. https://www.youtube.com/watch?v=D-4iaLDSPOg
Topics: thingiverse, quest, Electronics, oculus_quest, Oculus_Quest_2_Mount, stl, oculus_quest_2,...
0
0.0
Apr 19, 2022
04/22
by
Smiley McFrown (smiley_mcfrown)
data
eye 0
favorite 0
comment 0
Note: To see the difference between v1 and v2, you have to go into 3D View and rotate the model! ------------------- This is a remodelling (with slight improvements) of "BoboVR M2 Battery Mount_smaller remix" by *toyxyz123*, which is a remix of "Quest 2 BoboVR M2 Battery Mount" by *feizzzthi*, which itself is a remix of "BoboVR M2 Battery Mount" by *MrTB* So why remodel and make this again? tl;dr - Better unbroken STL requiring 30% less plastic (less supports) with...
Topics: oculus_quest_2, thingiverse, bobovr, Oculus_Quest_2_Mount, bobovr_m2, Oculus, Quest_2, Video Games,...
2
2.0
Jun 11, 2021
06/21
by
Patrice Beauchamp (hymness1)
data
eye 2
favorite 0
comment 0
I remixed the Oculus Quest 2 DAS Adapter for my GoQuestVR Halo Strap (it might work with other type of Halo straps, I suppose they are all pretty much the same). I did not like the original fitting that was limited in the rotation and also the fact that the Quest would move on the horizontal plane. This adapter allows for precise rotation of the Quest and I'm "locking" the rotation with a velcro strap. Zipties are not requiered to secure the Quest to the adapter, but I did anyway....
Topics: oculus_quest_2, Oculus, Quest_2, Video Games, thingiverse, halo, stl
2
2.0
Jun 11, 2021
06/21
by
Sascha Schieferdecker (redstorm54)
data
eye 2
favorite 0
comment 0
This is a remix of https://www.thingiverse.com/thing:4798709, thanks for the original design! The original design placed the headphones very close to my head, and the holders/hooks snapped right off the headstrap plastic band. Changes: - Increased distanced of headphones to head by 10 and 25mm - Added variant of original design just a little slimmer to allow for a wider horizontal range of placing the headphones - All designs have thickened hooks that go behind the headstrap band, stronger...
Topics: oculus_quest_2, Video Games, oculus_quest_2_strap, thingiverse, stl
1
1.0
Jan 18, 2022
01/22
by
Brock Hu (Brock123)
data
eye 1
favorite 0
comment 0
I remixed these cups from the Bowk VR cups available on his discord. They work great with my AMVR Straps don't know if they will work with others. I only run a strap on my left hand now because that is my throwing hand and use an unmodified cup for my right. These are for use with an 18mm tube. I used carbon fiber but any 18mm tube should work. BowkVR Discord https://discord.gg/vxwB6b8b Here is a link to the shoulder rest that I made for this stock. https://www.thingiverse.com/thing:5169953...
Topics: VR_Stock, thingiverse, Video Games, oculus_quest_2, stl, Quest_2
1
1.0
Jan 18, 2022
01/22
by
Gönczi Marton (Smarszon)
data
eye 1
favorite 0
comment 0
This is a simple and easy to print accessory to make your Quest 2 more comfortable. You can easily slide the original headstrap through the printed part's slots. I have uploaded the Inventor part file too, if somebody wants to modify the design. All two models are in this part file as separate solids. Make sure to use supports under the slots. I have printed the main body and the buckle in TPU and used some flexible glue to fix them together.
Topics: headstrap, quest, thingiverse, oculus_quest_2, 3D Printing, stl, Quest_2
3
3.0
Jan 4, 2021
01/21
by
Mark Stringer (modellermark2)
data
eye 3
favorite 0
comment 0
Remixed to fit the Quest 2 headset. Wider in total and longer inner legs to grip onto the softer wider strap of the quest 2. Holds really nicely on the top or side straps
Topics: Toys & Games, stl, oculus_quest, quest 2, thingiverse, oculus quest 2
3
3.0
Jan 6, 2021
01/21
by
Patrick Thijssen (Mardante)
data
eye 3
favorite 0
comment 0
I did this small remix so that it could be turned around and the more robust part is on the bottom/back of the head.
Topics: quest2, Oculus, stl, Video Games, oculus_quest_2, Quest_2, thingiverse
3
3.0
Jun 20, 2021
06/21
by
Dhaillecourt Fabien (befax)
data
eye 3
favorite 0
comment 0
support de batterie pour oculus quest 2, le support est prevu pour une batterie anker 20100 mah, environ 8h d'autonomie pour le casque. se fixe avec une bande velcro une version avec tag oculus, et une version sans tag
Topics: Oculus, thingiverse, stl, oculus_quest_2, 3D Printing, Quest_2, Anker
2
2.0
Jan 7, 2021
01/21
by
Jim Harry (SpectreGadget)
data
eye 2
favorite 0
comment 0
I liked both versions of David Navida's [Elite Strap](https://www.thingiverse.com/thing:4630780), but the the plastic snagged on the fabric of my standard strap. I pulled out the tabs, including the center guides, and added loops. Use velcro, wire ties, or whatever through the loops to help keep this attached to the strap. I took out the middle guides as my big head needs the most strap width, so now it's fully adjustable.
Topics: stl, Video Games, oculus_quest_2, thingiverse, oculus_quest_2_strap
3
3.0
Mar 15, 2021
03/21
by
joe mangini (FallenHentaiAngel)
data
eye 3
favorite 0
comment 0
I loved the design (even though my prescription didn't fit due to my bottlecap lenses) but I thought I'd make this magnetic variant using my 6x3mm magnets I had lying around that way I won't ruin my print by taking them on/off
Topics: Oculus, thingiverse, stl, oculus_quest_2, Quest_2, 3D Printer Accessories
5
5.0
Mar 16, 2021
03/21
by
Antonio Zavala (touknee)
data
eye 5
favorite 0
comment 0
This is a remix from https://www.thingiverse.com/thing:398515 I used the snap fit file printed great on Ender 3 v2 and added the venom eyes on it. I used .3 resolution to cut printing time but at a .16 will look much better.
Topics: Oculus Quest 2, thingiverse, Venom, Headset, Video Games, Quest 2, stl
3
3.0
Mar 16, 2021
03/21
by
Tony Youngblood (tonyyoungblood)
data
eye 3
favorite 0
comment 0
See this Quest 2 wall mount in action here: https://youtu.be/4qO1j1uNAfY If you download this thing, please "like" or "collect it." I couldn't find an Oculus Quest 2 wall hanger that I loved, so I made one. It works with the Elite strap as well as the regular strap. I designed it to match the curves of the headset and the controllers. It took a lot of iterations to get right, but I finally got it! I have not tried this on a Quest 1 or other headset, but if you try, please...
Topics: VR_headset_mount, Oculus, thingiverse, oculus_quest_2_strap, quest, quest_2_elite_strap,...
3
3.0
Mar 15, 2021
03/21
by
Patrick Krämer (kreanym)
data
eye 3
favorite 0
comment 0
My version of a knuckle strap for Oculus Quest 2 I personally like the Uni Version, simply print with flexible material and you're done! It's a loose fit, but it does the job very well! for everyone else there is also a two-part version, you only have to stick on some Velcro. In both versions you have to use some double-sided tape to attach the upper part to the battery cover as in the last picture.
Topics: Oculus, thingiverse, Computer, oculus_quest, stl, oculus_quest_2, Quest_2
2
2.0
Jun 21, 2021
06/21
by
(Hyabusa)
data
eye 2
favorite 0
comment 0
This is a Batterie Clip for an Accu Pack with size like an Anker PowerCore 5000. You can mount this on a Oculus Quest 2 Elite Strap or an derivat of it with two cable ties. If your Accu Pack dosend fit exactli you can fix it with rubber bands. There will be two positions on it. For the USB cable I used a 30cm USB-C (90°) to USB-A Kabel. You need an 50cm if you want fix the capel on the Strap I was inspired on the Oculus Quest 2 DIY Elite Strap of miguelpie...
Topics: Oculus, thingiverse, Elite_Strap, stl, oculus_quest_2, Quest_2, Gadgets
1
1.0
Apr 19, 2022
04/22
by
Sven Kaa (miniskipper)
data
eye 1
favorite 0
comment 0
Simple clips to attach a headphone to the Oculus Quest 2 with the Elite Strap. Uses velcro strips. Cable-ties would also do the job. If printed on a calibrated printer the clips should be able to slide along the strap.
Topics: oculus_quest_2, thingiverse, Meta_quest_2, vr_headset, stl, Computer
4
4.0
Mar 15, 2021
03/21
by
Andy Tran (Rnabu)
data
eye 4
favorite 0
comment 0
Just a clip for hanging cable. *Design for Oculus Quest 2
Topics: Oculus, thingiverse, stl, oculus_quest_2, Quest_2, 3D Printer Accessories
2
2.0
Jan 6, 2021
01/21
by
Ryan (SolidRye)
data
eye 2
favorite 0
comment 0
Just a very simple, cheap and easy to print cable clip. Just slide your cable(s) in from the top. Open end makes it easy to swap cables if needed. Fits fairly thick cables with ease as shown.
Topics: cable_management, stl, Video Games, oculus_quest_2, virtual_reality, Quest_2, thingiverse,...
2
2.0
Jun 10, 2021
06/21
by
Tauras Koreiva (Taurasaurus)
data
eye 2
favorite 0
comment 0
# **Magnetic Grips for Quest 2 ** **Hi everyone! ** First of all I'd like to thank **joaoluisbrito** for creating such a intricate and functional stock. I'm a fan of the VRGM stock and love how it feels in the hands however, I've noticed a lack of Quest 2 compatibility. So, after a few weeks of trial and error, I've finally decided to upload these here. ___ These **magnetic grips** are designed to be used with the 2 x 20 by 3 mm magnets, as I've not had luck with the 4 x 10mm magnets. ___...
Topics: oculus_quest_2, grip, virtual_reality, quest, oculus, Quest_2, stl, quest_pistol_grips,...
3
3.0
Jan 8, 2021
01/21
by
Massimo Bernini (ineiub)
data
eye 3
favorite 0
comment 0
Earphone for Oculus Quest 2. This earphone are especially designed to be attached to the original Elite strap. To complete the project you need the following stuff: Earphone drivers 3.5 audio jack 3x18mm screw A piece of fabric to warp the front cover. Please chose a very thin and elastic fabric. Assembly Follow the video to see how to assembly all parts. https://youtu.be/CmhX96-Q2dQ NOTE I used a super glue to attach the fabric to the cover and also to stick the rear driver cover to the...
Topics: elite strap, Oculus, stl, Computer, oculus_quest_2, earphones, Quest_2, thingiverse
2
2.0
Jun 11, 2021
06/21
by
danin boutwell (Afella_B)
data
eye 2
favorite 0
comment 0
this is for us sad people with 100x100 print beds. Id recommend putting a microfiber cloth cut to shape on the inside of it as the flat bit is pretty thin so it doesn't come in contact with the lens. you do not need to mirror the print for the left and right, you can just turn it and it will fit. And, I put a picture of my cat for good measure. ;)
Topics: oculus_quest_2, Oculus, quest, Quest_2, thingiverse, vr_headset, Other, stl
6
6.0
Jan 16, 2021
01/21
by
Miguel Duarte (pimi8522)
data
eye 6
favorite 0
comment 0
Here you go. The original Boneworks Quest 2 cap, which has since been removed. I managed to obtain the files again, and here you go, reuploaded. The design is for the quest, but also works on the quest 2 fortunately. Depending on your printer's settings, it might be a little tighter or looser. There are other designs available for adapters. I'd recommend watching Steve Knows' video on this strap. NONE OF THESE FILES ARE MINE. CREDIT TO ORIGINAL DESIGNER tightskin.
Topics: Games, strap, Oculus, BONEWORKS, thingiverse, headstrap, oculus_quest_2, Quest 2, stl
0
0.0
Apr 20, 2022
04/22
by
Proschi 3D (Proschi-3D)
data
eye 0
favorite 0
comment 0
Oculus Quest 2 Flight Stick
Topics: oculus_quest_2, thingiverse, flight_controller, Oculus, Quest_2, Video Games, stl
2
2.0
Jan 6, 2021
01/21
by
(raspirate)
data
eye 2
favorite 0
comment 0
This is a battery mount for the halo strap 3rd party accessory for the oculus quest 2 that can be purchased from [aliexpress.](https://www.aliexpress.com/item/1005001619417239.html?spm=a2g0o.productlist.0.0.514921ccq97AxT&algo_pvid=7082dcd9-ea03-43a5-b020-9ab5f1c72433&algo_expid=7082dcd9-ea03-43a5-b020-9ab5f1c72433-2&btsid=2100bb4c16031753841644208e8393&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_) It is designed to work with [this Charmast usb power...
Topics: Oculus, stl, Oculus_Quest_2_Mount, Video Games, oculus_quest_2, thingiverse
2
2.0
Jan 7, 2021
01/21
by
Carlos Puentes (seethebridges)
data
eye 2
favorite 0
comment 0
Just a quick cable guide based on the same clip design from my CV1 headphone adapters. This gives you an attach point for a 4.2mm USB cable to be routed back behind you more easily.
Topics: Oculus, stl, Video Games, oculus_quest_2, Quest_2, thingiverse, Oculus_Link
2
2.0
Jan 6, 2021
01/21
by
Dark Water (darkh2o)
data
eye 2
favorite 0
comment 0
A battery holder for the EAFU Portable Charger, Compact 10000mAh as found on amazon for only $10-15 usually. Its cool to see a number percentage left on your battery. It's a little tight the first time you slide it in but it gets looser later. It doesn't get in the way if you sit with your head back like in a recliner.
Topics: 3D Printing, Oculus, stl, oculus_quest_2, oculus_quest, Quest_2, thingiverse
2
2.0
May 1, 2021
05/21
by
Adam Uhl (AdamAndEvil)
data
eye 2
favorite 0
comment 0
Its about time that printer made something that you will really use! This is a replacement strap for the Oculus Quest 2. Detailed assembly and print instructions in the video. https://youtu.be/H4FOXH0Fc9Q
Topics: stl, quest, Quest_2, oculus_quest_2, Video Games, thingiverse, oculus_quest
3
3.0
Jan 18, 2022
01/22
by
Dante Cilli (dante_cilli)
data
eye 3
favorite 0
comment 0
Oculus quest control support to stick on the wall. Also support the charger, batteries and cables.
Topics: quest, thingiverse, Video Games, oculus_quest_2, oculus_quest, stl, Quest_2
1
1.0
Jan 18, 2022
01/22
by
Matthew McDaniel (Mcdaniel88)
data
eye 1
favorite 0
comment 0
This is my design for a mounting stand to hold the Oculus Quest 2 headset and controllers. Print in PLA; 3 layers top, bottom, and perimeter 15% infill -The controller supports are push in. -The Top, Bottom and Back are all connected by force threading M3 screws. -Bottom: To connect the back support, 3) M3x15 in the middle holes and 2) M3x10 in the side holes -Top takes 3) M3x15 This thing is a work in progress any constructive criticism is greatly appreciated.
Topics: Oculus, thingiverse, oculus_quest_2, oculus_quest, 3D Printing, stl, Quest_2
