0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Justin Kreiger (jdogz2002)
data
eye 0
favorite 0
comment 0
I wanted to try designing my own case for a project I did for my father and I had some some spare 80mm fans laying around and this is what I came up with. I've already tested the Raspberry Pi 4 model and know that one works, but I have not tested the 3B+ yet. The two halves are held together by a slot on one end and whatever screw you find that fits in it. Currently working on a hinged version
Topics: Raspberry_Pi, stl, thingiverse, raspberry_pi_case, 3D Printing
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
oscar vanslijpe (OscarVsp)
data
eye 0
favorite 0
comment 0
Files use to mount a rpi3 with a relay switch to a monitor
Topics: Relay_Case, Engineering, vesa, stl, thingiverse, raspberry_pi_case, vesa_mount, Raspberry_pi_3
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
GC Chen (cgcel)
data
eye 0
favorite 0
comment 0
## Pi4TNTCase - This is a raspberry pi 4 case designed from Minecraft TNT cube. - This is my first design, made by Sketchup2020.
Topics: Raspberry_Pi, stl, thingiverse, raspberry_pi_case, 3D Printing
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Eli Everett (willywonka922)
data
eye 0
favorite 0
comment 0
A better version of my Raspberry Pi 3B desktop tower case
Topics: Raspberry_Pi, Computer, stl, thingiverse, raspberry_pi_case, case, Raspberry_pi_3
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
(JBear)
data
eye 0
favorite 0
comment 0
Needed to mount the Pi to my Creality CR5+ and added a bracket to the design I remixed from
Topics: 3D Printer Accessories, stl, thingiverse, raspberry_pi_case, OctoPrint_case, 3.5_inch_tft
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Frank Keene (keenef)
data
eye 0
favorite 0
comment 0
This Raspberry Pi Touchscreen Mount was designed to house a UCTRONICS 7 Inch IPS Touch Screen for Raspberry Pi 4b. It has a hinge mount designed to mate with 2020 aluminum extrusion so I could mount it on the top of my TrueUpLZ 3D Printer.
Topics: 3D Printer Accessories, 3D_printing, Raspberry_Pi, stl, thingiverse, raspberry_pi_case,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Christian Fuß (feetprints)
data
eye 0
favorite 0
comment 0
ORIGINAL MAKE: JanWillem Drenten grabcad.com/library/raspberry-pi-4-case-8 I needed a case for my raspberry running klipper and I had this 50mm fan from the PSU left. I searched a lot but did only find cases where the fan is mounted outside. Sadly thingiverse no one links the STEP data where you could easily remodel it. Thanks to JanWillem's original design where he linked his fusion360 files it was easy to adjust it for the 50mm fan. Since I already had STL files for feet on my ender 3 v2,...
Topics: no screws, raspberry case, ender 3 v2 rail, 50mm fan, screwless, raspberry, stl, Electronics,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Norbert Lohrmann (nlohr)
data
eye 0
favorite 0
comment 0
#Case for Raspberry-Pi Zero-2-W ###with low-cost passive Heat-Sink (inside). The Pi-Zero-2W is made to consume few power and does not really heat up - in normal mode. But if overclocked (f.ex. upto 1400MHz), it consumes more and consequently it needs good cooling. So with this case it is possible to mount the pi with heat sinks on every single IC (mounting it inverse, with two 6mm-Distancer) or with a unique heat sink (as shown in the pictures) **Dimensions:** 74 x 34 x 17,5 mm ###Alu-Heatsink:...
Topics: 3D Printer Accessories, heatsink, stl, thingiverse, raspberry_pi_case, case
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Silex Perience (Silexperience21)
data
eye 0
favorite 0
comment 0
This is The First RaspberryPi case for custom Bitcoin SBC by Mirko_electronics This Raspberry Pi CM4 Carrier Board is Built for Bitcoin FullNode & Lightning network node. The BitPiRat adds two USB ports, an Ethernet port, one HDMI input and an M.2 PCIe slot for storage—critical for anyone looking to run a full Bitcoin node. It has a 2-pin power supply connector and 5V power rail that can deliver up to 5A of power. https://github.com/MirkoElectronics/...
Topics: bitcoin, rpicm4iobox, Raspberry_Pi, Computer, Raspberrypi_CM4, fullnodecase, bitcoinfullnodecase,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Daniel Berwanger (HomeUser101)
data
eye 0
favorite 0
comment 0
Screws (you need 4 for 2.5" SSD/HDD and 4 for Raspberry Pi)
Topics: Raspberry_Pi, raspberry, ssd_mount, stl, thingiverse, raspberry_pi_case, Raspiblitz, Other,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Benzin Lord (BenzinLord)
data
eye 0
favorite 0
comment 0
Case for RaspberryPi with 10.1" Display I designed this Case while i build my RetroStation. Print the two big halfs of the case vertically! Assembly Instructions: Insert Ribboncable in Port on Driverboard of the Display, slide RetroPie-Case_Left and RetroPie-Case_Right on the Display (watch out so you dont rip the ribboncable). Place the driverboard plate around the ribboncable and screw it down with M2.5 Screws. Plug HDMI cable in to the driverboard and screw it to driverboard plate. Plug...
Topics: retropie, Raspberry_Pi, stl, Electronics, thingiverse, raspberry_pi_case, Retrogaming, case
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
RetroGaming Rewind (retrogamingrewind)
data
eye 0
favorite 0
comment 0
Nintendo 64 inspired Raspberry Pi 4 case Pikachu edition
Topics: raspberry_pi_4, nintendo_64, Video Games, stl, thingiverse, raspberry_pi_case, pokemon
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
David Kim (david83k)
data
eye 0
favorite 0
comment 0
Raspberry Pi 400 (US layout) I've been wanting to model and 3D print various mounts and attachments for my Raspberry Pi 400 and couldn't find any CAD model for it on the internet. So, I've spent an afternoon modeling the Pi 400 based on reference images that I took, some drawings in the user guide, and some manual measurements with the caliper. I haven't used the model for my designs yet. So, there could be measurement errors. Please double-check the measurements before designing something very...
Topics: RaspberryPi, Raspberry_Pi, raspberry, Computer, US-layout, Raspberry_Pi_400, design_reference, stl,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
André Tolksdorf (Landrat)
data
eye 0
favorite 0
comment 0
Mit dem Hutschienenadapter und dem dazu passenden Rasperry Pi Case + Deckel, könnt ihr den Raspberry auf eine Hutschiene (Standartmaß = 35mm) montieren.
Topics: raspberry, hutschienenmontage, hutschienenadapter, Hutschienenhalterung, Rasperry_Pi, stl,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Shosei Hatsuyama (blazentrance)
data
eye 0
favorite 0
comment 0
Remixed Minimalistic Snap-on Screwless Raspi Case for Raspberry Pi Zero extrusion mount Mod the pin header position and add simple bolt holes, 2040 or 2020 both could work for bolt mount. with M3 bolt. I use it for Voxelab Aquila stock display drive from Pi Zero as pictured, greatly thanks for this simple and minimal design. It perfectly helps to add pi-camera on x extrusion as well(with 30cm cable ver.)
Topics: 2020_extrusion, Raspberry_Pi_Zero, Raspberry_Pi, stl, 2040_extrusion, 3D Printer Parts,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Nathan Jones (Nate_the_Great)
data
eye 0
favorite 0
comment 0
I made this case out of a necessity to keep my kids from destroying the Raspberry Pi 4B I setup as a Retro Pi for them. The case uses the hardware from the 52Pi Cooling Tower to fasten everything together.
Topics: Raspberry_Pi, Raspberry_Pi_4b_case, Learning, raspberry_pi_4b, stl, thingiverse, raspberry_pi_case,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Lukáš Poddaný (verustus)
data
eye 0
favorite 0
comment 0
To mount this mount to rpi and mount outside of this mount you will need M2.5x16 screws.
Topics: ssd_mount, HDD_mount, stl, hdd, thingiverse, raspberry_pi_case, Rpi4, ssd, Electronics, case
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Norbert Lohrmann (nlohr)
data
eye 0
favorite 0
comment 0
#RasPi Zero-2-W Case - simple If running in normal mode (not overclocked), the Pi-Zero-2W doesn't need a heat-sink, since its temperature does not go much higher than about 40°C. - This simple case may protect the electronics aginst short circuits - it comes with a Pins-"Flap-Lid", to handle the 2 rows of his 40 IO-pins. ###Possible add-on's: - a Raspi-Off Button. (See my instruction on Github:...
Topics: 3D Printer Accessories, Raspberry_Pi, stl, sd_card, thingiverse, raspberry_pi_case, case
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Bedroom Ninja (bedroom_ninja)
data
eye 0
favorite 0
comment 0
I'm using a RGBerry Hat with my Raspberry Pi4 in a Argon NEO case to connect the Pi to a Sony Trinitron CRT. I needed a new top for the case to cover the SCART connector. This is the first release and I'm sure it can be improved but suits my purpose just fine. I've included the STEP file so it can be easily remixed again.
Topics: neo, CRT, Raspberry_Pi, RGBerry, stl, thingiverse, raspberry_pi_case, RGB_SCART, Other, scart,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Scott Gibb (ScottGibb)
data
eye 0
favorite 0
comment 0
# Raspberry Pi Power Splitter Case Add-on # Summary This thing is an add-on case for the Raspberry PI Case linked below. When working with this case and the Raspberry Pi, I found that I needed more 5V and 3v3 Source pins and so I decided to add a small breakout board that houses more connections to power all my sensors that I have plugged into the Pi. # Equipment List The following parts are needed to complete the assembled thing: - 1 x [3D Printed Raspberry Pi...
Topics: Raspberry_Pi, stl, splitter_case, Electronics, thingiverse, power_supply_mount, raspberry_pi_case,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
luigi dc (luigidc)
data
eye 0
favorite 0
comment 0
Pi NAS case
Topics: Raspberry_Pi, stl, thingiverse, raspberry_pi_case, DIY, NAS
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Peter Roe (13bit)
data
eye 0
favorite 0
comment 0
This a remix of [Magic_Smoke's](https://www.thingiverse.com/magic_smoke/designs) [AIY Vision snap-fit case](https://www.thingiverse.com/thing:4726264). I made the depression around the front LED a little shallower to better accommodate the LED retaining ring. I also added a cutout of the AIY logo on the back.
Topics: Google_AIY_Kit, Raspberry_Pi, vision, enclosure, electronics_enclosure, stl, Electronics,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Yuan Lin (sys_er26)
data
eye 0
favorite 0
comment 0
The original [design provided by PiSugar](https://github.com/PiSugar/pisugar-case-pihat-cap) is not very easy to print on my printer, so I came up with this design for the ease of printing. #### Compatibility Compatible with [WaveShare 1.3 inch LCD Hat](https://www.waveshare.com/wiki/1.3inch_LCD_HAT) and [PiSugar 3](https://github.com/PiSugar/PiSugar). #### Features Every Layer can be used separately. #### Notes 1. Watch the length of screw and avoid damage to the battery pack. 2. The standoff...
Topics: PiSugar, Raspberry_Pi, waveshare_LCD, stl, Electronics, thingiverse, raspberry_pi_case,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Brent Svac (badabby)
data
eye 0
favorite 0
comment 0
box for the piunora that you can attach the pi hawk camera from arducam to. only fits this heat sink: https://www.waveshare.com/cm4-heatsink.htm or smaller. doesn't work with the heat sink that was initially sold in the piunora kickstarter.
Topics: Arducam, camera, RPICM4, pi_hawk_64mp_camera, cm4, stl, Piunora, thingiverse, raspberry_pi_case,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Joe Wei (MetaKnightXL)
data
eye 0
favorite 0
comment 0
Since I was looking for a suitable case for my IceTower Flat, I take this into my own hands without further ado. This is a little remix to my previous case for the IceTwoer. After the basic case is printed, the Geekworm adapter an fan is installed in the case differently than in the description. - First, the first four spacers M/F are screwed directly into the holes provided by the case. - After that mount the Raspberry Pi 4 with the last four spacer M/F. - The fan is mounted on the Raspberry...
Topics: Raspberry_Pi, stl, icetower, thingiverse, raspberry_pi_case, DIY, case
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Tommaso Dani (Endert0m)
data
eye 0
favorite 0
comment 0
This is a case wall made for my other project that will make you able to install a Waveshare 2.13 inc e_ink display to the actual case of the raspberry Pi 4
Topics: Raspberry_Pi, e _ink, stl, Electronics, thingiverse, raspberry_pi_case, e_Paper
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Joe Wei (MetaKnightXL)
data
eye 0
favorite 0
comment 0
Since I was looking for a suitable case for my IceTower and the Geekworm X857 and take this into my own hands without further ado. This is a little remix to my previous case for the IceTwoer. After the basic case is printed, the Geekworm adapter an fan are installed in the case differently than in the descriptions. - First, the first four spacers M/F are screwed directly into the holes provided by the case. - Befor mounting the X857 take four M2,5 screws and mount them on the next four spacer...
Topics: 3D_printing, Raspberry_Pi, stl, icetower, thingiverse, raspberry_pi_case, DIY, Geekworm_x857, case
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Rohin P (rohinp)
data
eye 0
favorite 0
comment 0
Every other Raspberry Pi mount that I tried was absolutely terrible, with funky, stupid-looking, non-functional designs So here is something simple that I designed. My use case is to mount this to the rear of my Ender 3-V2 to use with Klipper Firmware. Is meant to work with a 3-d printed m3 v-slot nut: https://www.thingiverse.com/thing:3050607 It has better airflow than your high-performance gaming PC while also having multi-purpose slots for not only cooling, but also that Pi-Cam ribbon cable,...
Topics: 3D Printer Accessories, Raspberry_Pi, Ender_3, stl, thingiverse, raspberry_pi_case
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Elias Englen (Elias4711)
data
eye 0
favorite 0
comment 0
A Raspberry pi NoIR Camera design. I designed it for my Cat Way to detect when the cat is coming and detect wether there is a mouse in the mouth or not. The stand is designed for a 8mm board to slide it on.
Topics: Raspberry_Pi, raspberry, stl, thingiverse, raspberry_pi_case, 3D Printing, raspberry_pi_camera
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Chris Barth (Cbarth3)
data
eye 0
favorite 0
comment 0
Liked the minimalist of this case for the 3b+ but wanted it to rack mount. Later decided I wanted to add a fan to it since I had to remove some area for the heat sink. Fan sits over the mounts and is screwed down with M2 cap head screws
Topics: 3b+, stl, thingiverse, raspberry_pi_case, 3D Printing
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Arthur Schulz (Mhyskilyus)
data
eye 0
favorite 0
comment 0
I wanted to mount my Raspberry Pi4B and my webcam (Logitech C270) together on my Anycubis Mega S to save space. The result is a construction made up of different parts that already exist. For the Raspberry case, you need to download the following files: (choose your configuration) https://www.thingiverse.com/thing:3793664 Assembly: - The lower part of the Raspberry is glued to the "Adapter Anycubic Mega S" with superglue. - use M3x20 screws to screw together the Raspberry case (if you...
Topics: Arduino_Mega, 3D Printer Accessories, Logitech_C270, Anycubic_I3_Mega, stl, thingiverse,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Nao (n602)
data
eye 0
favorite 0
comment 0
LapTop frame for Raspberry Pi 400 (Waveshare 7inch display version) This is a frame kit for converting your Raspberry Pi 400 with Waveshare 7inch Display [SKU 18068] to a laptop (or portable?) PC without any hardware-modification. Unfortunately, I don't have a large capacity, high power small battery for the Raspberry Pi 400, so I made this kit to work with an AC adapter. This may be called a "transportable PC" rather than a laptop. This thing is a remix model of thing: 4938351. ---...
Topics: Raspberry Pi 400, Raspberry_Pi, Computer, stl, thingiverse, raspberry_pi_case
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
(DavidPhillipOster)
data
eye 0
favorite 0
comment 0
The original case for my Raspberry Pi 3B+ is my favorite, but it kept getting bumped and knocked down. Here is wall mount that lets me insert and remove the Pi+case while it is still powered on.
Topics: Wall_Hanger, Raspberry_Pi, openscad, stl, Electronics, thingiverse, raspberry_pi_case, wall_mount
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Andre Pothier (16BitGames)
data
eye 0
favorite 0
comment 0
If you don't have a 3D Printer we also sell pre-printed units with a key chain at on our store at: etsy -16bitgamestore.etsy.com eBay - ebay.ca/usr/16bitvideogamestore Need a simple to print case for your Pi 4? Well this is the one I use. It requires 2 10-32 1/2" screws. There are 2 versions of the top part, version 1 is the one I sell which includes slots for 2x 10-32 Nuts to ensure a secure closure. version 2 is designed to be used without nuts, the 10-32 screws will thread the plastic....
Topics: raspberry_pi_4, Raspberry_Pi, Computer, stl, thingiverse, raspberry_pi_case
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
warrior 3d (w3design)
data
eye 0
favorite 0
comment 0
I loved the design of this case by JISpal01, however since i was running it off of an older PI 3b i decided to mix a few of the deigns together to make it work for me. so far everything fits, still waiting on the ice tower to arrive. Will post print pictures once i have all the parts :)
Topics: linux, Raspberry_Pi, stl, Kali, thingiverse, raspberry_pi_case, 3D Printing, kali_linux
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Fábio rf (fabiorf)
data
eye 0
favorite 0
comment 0
Case para display de 5 polegadas.
Topics: lcd_display, stl, thingiverse, raspberry_pi_case, 3D Printing, case display
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
James Spalding (JISpal01)
data
eye 0
favorite 0
comment 0
I am uploading things to Printables, where it's easy to format the description and show pictures relevant to particular text. https://www.printables.com/social/273738-jispal01/models BASIC INFORMATION: The Argon Mini Fan (Amazon # B08HLX9WRV) is a pretty decent little cooling solution for the Raspberry Pi 4. Especially if you're not overclocking and don't need maximum cooling. They're low profile and low cost ($10USD for two of them on Amazon at the time of this writing). It has a PWM function...
Topics: Raspberry_Pi, stl, Electronics, thingiverse, raspberry_pi_case, Argon_Mini_fan
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Nikodem Bartnik (NikodemBartnik)
data
eye 0
favorite 0
comment 0
https://youtu.be/8Y-UEzqsMPs A simple holder for a raspberry pi designed for Ender3 might work with similar printers too! Thanks to drawer-like design raspberry is easy to access and you can just simply swap it between different projects, it's really handy considering that it's almost impossible to buy those small computers now. Some other things I used to upgrade my printer: [Octoprint](https://octoprint.org/) [Ender...
Topics: 3D Printer Accessories, Raspberry_Pi, creality, Ender_3, stl, thingiverse, holder,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Tomasz Pankowski (madalpaca)
data
eye 0
favorite 0
comment 0
It's a remix from this awesome case: https://www.printables.com/model/106295-raspberry-pi-zero-case-zero-w-case-zero-2-w-case-2 It's compatibile with pi zero and pi zero 2(w) Components used: - pi zero - radiator: https://pl.aliexpress.com/item/1005003796537427.html?spm=a2g0o.order_list.0.0.35521c24PFryXg&gatewayAdapt=glo2pol it works well with both pi zero and pi zero 2 - screen: phat 2.13" eink from pimoroni - software: https://pi-hole.net - HUD:...
Topics: pihole_case, Raspberry_Pi_Zero, Pimoroni, inky, pihole, stl, Pi_Zero, thingiverse,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Joe Wei (MetaKnightXL)
data
eye 0
favorite 0
comment 0
Since I was looking for a suitable case for my IceTower, but did not find it, I wanted to take this into my own hands without further ado. After the basic case is printed, the fan is installed in the case differently than in the description. - First, the first four spacers M/F are screwed directly into the holes provided by the case. - Then the Rapsberry Pi 4 with the second four spacer M/F fixed to the lower ones. - The fan is mounted on the Pi, which is then fixed to the Pi with the screws....
Topics: rapsberry_pi, 3d_printer, stl, thingiverse, raspberry_pi_case, DIY, case
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Dennis Kuit (DennisTheMenace)
data
eye 0
favorite 0
comment 0
Housing for the duo Zero 2 W and Raspberry HQ Camera in a FreeCAD drawing with printable STL export files. Usefull set for MotionEye, OctoPrint, Klipper, CCTV and AI-vision applications.
Topics: motioneye, RPi_Zero, Raspberry_Pi, raspberry_pi_housing, rasperry_pi_hq_camera, Camera,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Brad Drews (zoochild)
data
eye 0
favorite 0
comment 0
This is a custom case to hole the RaspberryPi Zero with the Adafruit 1.3 inch square TFT screen. No glue or fasteners required.
Topics: pihole_case, stl, Electronics, thingiverse, raspberry_pi_case
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Aleksandr Ru (aleksandr_ru)
data
eye 0
favorite 0
comment 0
Raspberry pi 3B holder clip with screw mount. Designed to be used with [heatsink from ali](https://aliexpress.ru/item/33039918582.html?spm=a2g0s.12269583.0.0.2d451f44EedNUo).
Topics: Raspberry_Pi, stl, Electronics, thingiverse, raspberry_pi_case, rapberry pi holder
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Bennett Gunson (bgunson)
data
eye 0
favorite 0
comment 0
V-Slot mountable case for Raspberry Pi 4 perfect for mounting an OctoPi (or similar) directly to your 3D printer. I have mine mounted to my Ender 3 V2. The mount is built off the bottom half of the case. You can fint the original [thing here](https://www.thingiverse.com/thing:4846459).
Topics: OctoPi_mount, Raspberry_Pi, octopi, Ender_3, stl, Electronics, thingiverse, raspberry_pi_case,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Andrew Bennett (Orbnotacus)
data
eye 0
favorite 0
comment 0
EDIT: Just realized I should probably note, this is meant for the Raspberry Pi 4, and 9g micro servos. I've really been getting into microcontrollers, and I love the concept of the robot dog, so this is my attempt at making a "Robot Dog". This IS a work in progress, print and download at your own risk, there will be a lot of changes over time.
Topics: Robot dog, Robot, Raspberry_Pi, Raspberry_Pi_4_mount, Dog, stl, QuadraPed, thingiverse,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
erdinç coşgun (erdibaba3)
data
eye 0
favorite 0
comment 0
Print however you want
Topics: 3D Printer Accessories, Raspberry_Pi, BeagleBone_Black, octopi, stl, beaglebone, thingiverse,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Chris Herman (Damidar)
data
eye 0
favorite 0
comment 0
PiTop is my version of the creation https://www.thingiverse.com/thing:3410107, by Ian Dunn (mountainmanmachinest) https://www.thingiverse.com/mountainmanmachinest/designs (Many thanks to you for your time and effort!). I created the PiTop to be a low powered OctoPrint & Retropie system that I could easily move between my work and home to observe 3D printing jobs remotely without fear, and occasionally play an emulated game. Several of the parts for the existing design were either...
Topics: Raspberry_Pi, laptop, stl, thingiverse, OctoPrint_case, raspberry_pi_case, 3D Printing,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
yuval maor (ym53)
data
eye 0
favorite 0
comment 0
my remix for my raspberry pi zero 2 W work great
Topics: Raspberry_Pi_Zero, Raspberry_Pi, stl, thingiverse, raspberry_pi_case, Other, rpi
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Thiemo Schuff (Starwhooper)
data
eye 0
favorite 0
comment 0
the base is directly created from @bobtideys design. The lid is also from @bobtideys added with parts from the Raspberry Pi Rack mount. needed screws: 2x M3x16mm
Topics: Raspberry_Pi_Zero, Raspberry_Pi, stl, thingiverse, raspberry_pi_case, WaveShare, Office,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Piotr Wa (pietrek_)
data
eye 0
favorite 0
comment 0
Just another Octopi box for the Ender 3 Pro. Rear mounting, power supply side. Remember to calibrate the printer first, the case fits tightly. Use supports and support blockers just like on the pictures.
Topics: 3D Printer Accessories, Ender_3_Pro, Raspberry_Pi, Raspberry_Pi_4b_case, octopi, raspberry_pi_4b,...
