1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Aljaž Mulej (amulej)
data
eye 1
favorite 0
comment 0
A small case for Raspberry Pi Zero 2 W mainly designed for [PiKVM ](https://pikvm.org/) variants with covered GPIO and CSI slots or open HDMI to CSI-2 bridge: https://www.aliexpress.com/item/4000152180240.html CSI case: 1x [piKVM_-_rpi.stl](https://www.thingiverse.com/download:11427949) or [piKVM_-_rpi_csi-gpio.stl](https://www.thingiverse.com/download:11436242) 1x [piKVM_-_csi.stl](https://www.thingiverse.com/download:11427948) 4x...
Topics: thingiverse, Raspberry_Pi_Zero, raspberry, Electronics, raspberry_pi_case, stl, pikvm,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Robin Forestier (Rob1forest)
data
eye 0
favorite 0
comment 0
This is a case for my raspberry night vision camera.
Topics: thingiverse, raspberry_pi_camera, camera_mount, 3D Printer Accessories, raspberry_pi_case,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Xi Wu (Xisha)
data
eye 1
favorite 0
comment 0
The Raspberry Pi Zero2 is such capable yet small machine that fits perfectly with Mini. So I modified the display box file and added this side mount for the pi zero. No support needed. Ideally one should use the w version without the GPIO pin soldered. It should be also possible to change the orientation and moun the wh version, although not recommended. At least two M2.5 screws are needed for mounting. I only have M2.5x8mm so I added in a case that I printed before for extra padding. It is the...
Topics: thingiverse, Raspberry_Pi_Zero, 3D Printer Accessories, raspberry_pi_case, Raspberry_Pi, stl
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Tiffy Sesame (TiffyHH)
data
eye 0
favorite 0
comment 0
Original Files an den Raspberry 4 angepasst. Geändert sind: - Rückwand - Seite links - Unterseite -----------Translate ---------------------- Original files adapted to the Raspberry 4. Changed are: - Rear wall - Page left - Bottom
Topics: Raspberry Pi, box, aiy voice, aiy, thingiverse, Google, Google Voice, case, Google AIY Kit, Google...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Maarten Cammaert (marzsman)
data
eye 0
favorite 0
comment 0
An ultra minimalistic case for a Raspberry Pi Zero or Pi Zero HATs Snap or screw a Pi zero onto it so you can use it for prototyping or use it to stick a Pi to a project.
Topics: thingiverse, Raspberry_Pi_Zero, Electronics, raspberry_pi_case, Raspberry_Pi, stl
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Kbugeados Bugeados (Kbugeados)
data
eye 1
favorite 0
comment 0
Guía completa para llevar a cabo el proyecto del clon del Amazon Echo Show con la Raspberry Pi en el siguiente enlace: https://github.com/KBugeados/AlexaScreenPi
Topics: thingiverse, amazon_Echo_show, 3D Printing, raspberry_pi_case, raspberri_pi, stl
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Nunya Bizniz (littlehawk93)
data
eye 0
favorite 0
comment 0
A simple case I designed for housing a Raspberry Pi Zero W. Following [this tutorial](https://www.reddit.com/r/ElegooMars/comments/jxhyi3/using_a_pi_zero_w_as_a_smart_usb_flash_drive_for/) I was able to set up my Pi as a Wi-Fi enabled smart USB mass storage device plugged into my Photon Zero 3D printer. This allows me to "wirelessly print" files by dropping them in my Pi across my network. The case itself is to help protect the Pi from any potential spills during set up on the...
Topics: thingiverse, 3D_printing, Raspberry_Pi_Zero, 3D Printer Accessories, raspberry_pi_case, 3d_printer,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Cyril PERRIN (mamuteCPN)
data
eye 0
favorite 0
comment 0
This is a support for raspberry pi case which is normaly for 2020 or 3030 extrusion mounting. You can fix it up or down.
Topics: 3D Printer Parts, thingiverse, raspberry_pi_case, Octoprint, Raspberry_Pi, stl
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Michael LL (moogoo)
data
eye 1
favorite 0
comment 0
A simple, snap-fit, Raspberry Pi Zero 2 W case with the Raspberry Pi logo vent. No tools needed. Board can easily be removed. All ports available without removing the lid and opening for accessing the pins. Can easily be modified to remove the pin access window.
Topics: thingiverse, Raspberry_Pi_Zero, case, raspberry_pi_case, stl, Computer
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Leon Shaner (AEtherScythe)
data
eye 1
favorite 0
comment 0
This is a "Bring Your Own Case" Stand for a Raspberry Pi and RPI Camera, where you keep whatever your preferred case might be and just slide it into the stand. I took this approach so that it is more of a universal fit for various RPI models and so that you can continue to use your favorite case. I am happy to make other sized RPI trays and corresponding braces if there is interest, just shoot me a comment. The camera holder is for the standard RPI Camera that is 25mm x 25mm square....
Topics: Octoprint_Case, thingiverse, raspberry_pi_camera, 3D Printer Accessories, raspberry_pi_case,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Derek Antrican (derekantrican)
data
eye 1
favorite 0
comment 0
Remix a case design that I liked by someone else, but with more space around the HDMI ports for Micro HDMI adapters like this https://amazon.com/gp/product/B07K21HSQX that have plenty of plastic around the plug
Topics: raspberry_pi_4, thingiverse, Xiaomi_M365, Electronics, raspberry_pi_case, Raspberry_Pi, stl
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Stefan H. (Freneter)
data
eye 1
favorite 0
comment 0
Light-Version to glue/screw it in. M3/3mm Hole. THX 2 novaspirit !
Topics: thingiverse, Raspberry_Pi_Zero, raspberry, raspberry_pi_case, mount, Other, Raspberry_Pi, stl, pi...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Robin P (RobinsBlog_de)
data
eye 0
favorite 0
comment 0
top case
Topics: thingiverse, case, Electronics, raspberry_pi_case, stl, bitcoin
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Philip Völk (phips1307)
data
eye 0
favorite 0
comment 0
Housing that mounts directly onto the Prusa mk3. You just need 4 screews with washers M2x20 and 2 screws M3x8. Printable with any material, without supports. I printed it with Jetblack Prusa PETG. Installation: -Screew the Body to the frame of the printer (2 holes in the vertical line on the left side) -insert the RaspberryPi -Screw on the Lid (4 M2 Screws) Its better to screw the screws in and out again, before you actualy screw the parts together.
Topics: prusa_i3, thingiverse, raspberry_pi_housing, raspberry, 3D Printer Accessories, prusa_i3_mk3,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
benny wo (bennywo)
data
eye 1
favorite 0
comment 0
RASPBERRY PI Casing
Topics: raspberry_pi_case, Tool Holders & Boxes, stl, thingiverse
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Markus Schmid (mankut)
data
eye 1
favorite 0
comment 0
This is a box that has room for a Raspberry Pi 4 including an attached AudioDAC and a 2.5" hard drive. In my example, the box is screwed to the back of a TV (Vesa mount 100 x 200 mm). The hard drive is only clamped in. If it sits too loosely, you can still print out a mounting bracket and screw it to the holes provided (not included as a file here). If you want to use the Open-SCAD file, you still need your own logo. The Kodi logo used here is freely available and can be found here for...
Topics: tvbox, thingiverse, Pi-DAC, kodi, raspberry_pi_case, Audio-DAC, rasperry_pi_4, Other, stl
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Ryosuke Shimakage (Hectare)
data
eye 1
favorite 0
comment 0
This is an inno-maker usb-dac case. Optimized for raspberry pi zero w. You need M3x8 (or M3x12) hex head screw x 4 M3 din562 square nut x4 Details of usb-dac https://www.inno-maker.com/product/hifi-dac-hat/ Enjoy your Volumio life.
Topics: innomaker, Music, thingiverse, raspberry_pi_case, stl, usbdac
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Bjoern Waechter (slashnick)
data
eye 0
favorite 0
comment 0
I made this case to mount the raspberry Pi with 7 inch touchscreen an V2.1 cam on sidewinder x2. OS is Octoprint
Topics: raspberry_pi_4, thingiverse, raspberry_pi_camera, Hobby, atrillery, raspberry_pi_case,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Harald Geisler (Hans-G)
data
eye 1
favorite 0
comment 0
Für einen leichteren und schnelleren Druck habe ich das Gehäuse neu konzipiert. Es bietet jetzt auch die Kombination mit unterschiedlichen Halterungen. Alle weiteren Einzelheiten findet man bei den vorangegangenen Modellen. https://www.thingiverse.com/hans-g/collections/raspberry Die Gehäuseteile werden nur gesteckt und mit den vier M3 Schrauben am Display befestigt. https://youtu.be/h_x6hGyTFHM Die Blende ist optional für denjenigen, der da noch einen Schutz möchte. Ich empfehle vor der...
Topics: thingiverse, raspberry, raspberry_pi_case, Raspberry_Pi, stl, Computer
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Julian Schwirz (schwirz)
data
eye 1
favorite 0
comment 0
Noch ein Raspberry case... als gäbe es nicht schon genug. Ich habe mir ein Case für meinen Raspberry Pi 3 B+ erstellt, welches ich in den vslot einhängen kann, ja, nur in waagerechte Profile einhängen. Die allgemeine Idee mit dem Kameraausleger habe ich aus dem Design von ksamuelsen. Für den Zusammenbau werden noch folgende Teile benötigt: 8x Einschmelzgewinde M3...
Topics: thingiverse, raspberry_pi_camera, vslot, 3D Printing, raspberry_pi_case, Raspberry_pi_3,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Morgan Lowe (morganlowe)
data
eye 1
favorite 0
comment 0
Someone in my [Discord](https://discord.gg/zjVrUGh2fc) suggested a small easy case to hold their SKR and LCD. This fits the SKR 1.3, SKR 1.4 and SKR 2. This is what was born! Includes 2 bottoms one with the PI and MOSTFET board space, one without. The bottom has space for a XT-60 connection and a 12mm hole as well. Both can use a Micro SD extension from the SKR and the base without the Pi has a [USB Passthough](https://www.amazon.com/Printer-Extension-Adapter-Connections-Scanner/dp/B071P2BGK5)....
Topics: thingiverse, morninglionindustries, bigtreetech_skr_2, skr_14, skr_2, bigtreetech_skr, 3D Printer...
2
2.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Timo (Zopyx)
data
eye 2
favorite 0
comment 0
Snap on Case for the raspberry pi 4
Topics: raspberry_pi_4, thingiverse, Electronics, raspberry_pi_case, Raspberry_Pi, stl
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
(willb23)
data
eye 1
favorite 0
comment 0
20mm skull grill for micro fans actual size is 22x22x2mm.
Topics: fangrill, thingiverse, grill, 20mm, raspberry_pi_case, fan, Engineering, 12v, stl, Raspberry_Pi
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Daniel (Daniel496)
data
eye 1
favorite 0
comment 0
You need 4x M2X20 Screws or M2,5X20 Cooler...this cooler ist LxBxH 25x25x15,5mm
Topics: thingiverse, raspberry_pi_case, simple, Raspberry_pi_3, stl, Computer
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Thomas Croonen (tcroonen)
data
eye 1
favorite 0
comment 0
This OrangePi One housing is inspired by the RaspberryPi housing which I already printed a couple of times for my Pi's. Lately I tested the boards from OrangePi, was really happy with them and decided to adapt the housing for those. I designed two bottom parts. One with VESA75 and one without. http://www.orangepi.org/orangepione/ http://croonen.tech/orange-pi-2/orange-pi/ Leave a comment, and post your makes!
Topics: IOBroker, OrangePi, thingiverse, Gehä, use, raspberry_pi_housing, Raspberry_Pi,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Victor Oyervides (victoroy)
data
eye 0
favorite 0
comment 0
Raspberry Pi 2/3 mount for Ender 3 printers. The case is designed to be mounted on the left side of the frame of the printer. To mount simply unscrew the two front screws holding the mainboard case and align the holes of the mount with the screws. Screw everything back and enjoy!
Topics: thingiverse, OctoPrint_case, Raspberry_Pi, 3D Printer Accessories, raspberry_pi_case, rpi, mount,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Mark Hammett (MakeMarkMake)
data
eye 1
favorite 0
comment 0
I had been using the MK3 OctoPi Case by hackoholic (https://www.thingiverse.com/thing:2334119), but was annoyed how much work was required to remove the Raspberry Pi whenever I wanted to work on it, but I liked how and where it was mounted. I also didn't really care about having a fully enclosed case for the Pi, as it's not really in a place where it's in danger, so I found splitbrain's "Simple Raspberry Pi Mount (press-fit)" case (https://www.thingiverse.com/thing:3202131) and his...
Topics: thingiverse, Original_Prusa_MK3, mk3, mk3s, case, Original_Prusa_i3_MK3, raspberry case, 3D Printer...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Ritesh Kanchi (P0W3RZURG3)
data
eye 0
favorite 0
comment 0
A simple mounting plate for your Raspberry Pi 3 Model B. Perfect for those who don't want a case, but also don't want to leave their Pi just "there." There's an indent for the microSD card, to increase accessibility. **Inventor is weird with `.STLs`, if it's too small, try scaling to 1000%. The long side is 100mm.**
Topics: mounting, thingiverse, Electronics, raspberry_pi_case, simple, Raspberry_pi_3, stl, plate,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Bartłomiej Łepko (B_3D)
data
eye 0
favorite 0
comment 0
EN 80mm fan holder for raspberry pi 4b. I attached the fan with four m4 screws, and the raspberry pi with four screws that I had at hand, probably m2. I added an adjustable step up converter to the fan, because the fan I used is 12v and the raspberry has 5v (this is optional because without the inverter, the fan spins as fast as for such a small device) PL Uchwyt wentylatora 80 mm do raspberry pi 4b. Wentylator przymocowałem na cztery śruby m4, a raspberry pi na cztery śruby, które miałem...
Topics: raspberry_pi_4, thingiverse, diy, fan_80mm, 80mm_fan, anet, case, raspberry, gadget, Electronics,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Stephan Seidl (HappyUser20)
data
eye 0
favorite 0
comment 0
Ein Raspberry 3 Gehäuse als Ersatz für Originale Werkzeugschublade des Anycubic Vyper. - Der Raspberry steht auf dem Kopf und Anschlüsse nach hinten - Ein 2 Kanal Relais das über den Raspberry (Klipper geschalten werden kann). Ich schalte damit meinen LED-Ring für die Webcam. Ein Kanal als Reserve - 40iger Noctua Lüfter zur Raspi-Kühlung - 1x DC Anschluss 5,5x2,1 24V Input vom Netzteil der Vyper - 1x DC Anschluss 3,5x1,3 12 Output zum LED-Ring - 1x Mini USB Adapter - 1x USB c Kabel Ende...
Topics: thingiverse, Vyper, 3D Printer Accessories, raspberry_pi_case, Raspberry_Pi, stl
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Brendan (anv3d)
data
eye 0
favorite 0
comment 0
Simple friction-fit case for the Raspberry Pi Zero and all its variants. If anyone wants, I can add a camera port hole, screw mounting holes, and/or a GPIO cutout.
Topics: thingiverse, Raspberry_Pi_Zero, Electronics, raspberry_pi_case, Raspberry_Pi, stl
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Layon 70 (LPereira70)
data
eye 0
favorite 0
comment 0
Case
Topics: raspberry_pi_case, stl, 3D Printing, thingiverse
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Johann Lipp (rufnekz)
data
eye 1
favorite 0
comment 0
REMIXED LID FOR DUALFAN USERS SIMPLY CLOSED THE REGULAR FAN, ADDED A HONEYCOMB PATTERN AT THE POSITION OF THE DUALFAN
Topics: thingiverse, lid, dualfan, 3D Printer Accessories, raspberry_pi_case, Raspberry_Pi, stl
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Sketch Work (sketch_work)
data
eye 0
favorite 0
comment 0
This is the design for the Raspberry Pi 3 B+ PCB. Inside of the enclosure has PCB and Fan (30mm x 30mm x 10mm). This is a user-friendly design. You can put it anywhere (on the flat surface) and easily access all ports. Inside has 1 fan and Raspberry Pi PCB. The top Cover (TC) fitting type is a tight fit. Fit Air out Fan Assembling video:- https://youtu.be/5zZhMW2rGMM (Video was made for the advertising. We have to do some adjustments for the 3d print to improve the strength & stability of...
Topics: thingiverse, 3D_printing, case, Electronics, enclosure, raspberry_pi_case, Raspberry_pi_3,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Piotr Chrusciel (PiotrChr)
data
eye 0
favorite 0
comment 0
PiHouse - RaspberryPi + Arduino case Components: RaspberryPi 4 Arduino Pro Micro LLC (5V 3.3 V) 5’’ HDMI screen 20Ah battery A bunch of step-down regulators Power switches 5.5 mm power socket for 12V input Pin sockets and wires
Topics: arduino, thingiverse, raspberry_pi_camera, raspberry_pi_4_case, arduino_pro_micro,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Carson Child (CarsonChild)
data
eye 1
favorite 0
comment 0
A case for the Digilent Arty A7. I printed with no supports and it came out fine. I designed it with 0.2mm layer height in mind. The lid snaps into place. If the board in the base is a bit too tight, maybe try decreasing the flow on your printer.
Topics: arty a7, arty, thingiverse, arty-a7, digilent, case, Electronics, raspberry_pi_case, artix, fpga,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
M. Bo (iGoX)
data
eye 0
favorite 0
comment 0
This is a simple remix of [drakaz design](https://www.thingiverse.com/thing:4417133) adapted to the Raspberry Pi 4 Model B (original was for Pi 3). I also added 2 holes in the back to integrate: - a [push button](https://www.amazon.fr/gp/product/B07ZTJ4882/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1) to start/stop the Raspberry Pi - a [Led](https://www.amazon.fr/gp/product/B07MKRR3Q6/ref=ppx_yo_dt_b_asin_image_o00_s01?ie=UTF8&psc=1) to have a feedback on Raspberry Pi status I used...
Topics: 3D Printer Parts, thingiverse, case, raspberry_pi_case, creality_ender_3, stl, Creality,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Andreas F (Sturi2011)
data
eye 1
favorite 0
comment 0
Rhasspy Dot Case for Pi3A+ Matrix Voice and Speakers Slim modular offline voice assistant case For Configuration see https://community.rhasspy.org/t/picovoice-offline-voice-ai-engine-gets-free-tier-for-up-to-3-users/3328/9 I have printed a white and a black version - see pictures. Assemby: - print all parts - glue the fabric to the cover - i used superglue - cut the fabric rests from the cover - mount the matrix voice hat with 2 small screws - connect speakers trough speaker case, pi spacer and...
Topics: Rhasspy, Dot, thingiverse, Mic Array, Spracherkennung, DIY_electronics, Microphone,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Geir Atle Storhaug (GeirS)
data
eye 0
favorite 0
comment 0
This is a case for a Raspberry Pi 4 with an optional mount for a Western Digital My Passport disk. This is not really a remix, but I was inspired by https://www.thingiverse.com/thing:1815268. However I remodeled everything from scratch using FreeCAD (FreeCAD file included). Some background: I used the original design (mentioned above) for a some time, but the small 30x30mm fans kept failing after a while. Also these small fans did not provide very good cooling. I got some Sunon 60x60mm fans for...
Topics: thingiverse, stl, raspberry_pi_case, Raspberry_Pi_4, Raspberry_Pi, raspberry_pi_4_case, Computer
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Mike (Koeniglich)
data
eye 1
favorite 0
comment 0
Raspberry Pi Zero 2W Klipper Case for Vyper. You can mount on the side behind the display on the aluminium slot like my Picture.
Topics: thingiverse, RaspberryPiZero2W, Raspberry_Pi_Zero, 3D Printer Accessories, Raspberry Pi Zero 2W,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Julian Braun (Jules_prints_it)
data
eye 1
favorite 0
comment 0
I actually prefered the "sleeve case" mount for this printer, but it wouldn't fit my cpu cooler and the GPIO pins I use. So I remixed satanasinc's design, added the mount bars from the sleeve case which use the vertical screws already installed on the printer and I removed the old screw holder. I also cut out the cover so that you don't need to remove the GPIO cables or accidently pull them when opening it. It's not cut out perfectly since this was one of my first 3D projects but it's...
Topics: thingiverse, Genius_pro, artillery_genius, 3D Printer Accessories, raspberry_pi_case, artillery, stl
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Duncan Dacombe (ddacombe)
data
eye 0
favorite 0
comment 0
Inspired by robrobrobs Raspberry Pi 3a+ case (https://www.thingiverse.com/robrobrob/designs), I designed a Raspberry Pi 2 Model B case since I was unable to find this design as a Freecad file anywhere. Ive supplied the Freecad file here since others may find it useful to modify for their own projects. Enjoy.
Topics: thingiverse, 3D Printing, raspberry_pi_case, freecad, Raspberry_Pi_2, stl, Raspberry_Pi
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
koutaro Noda (Kuma0055)
data
eye 0
favorite 0
comment 0
Raspberry Pi Pico Case
Topics: raspberry_pi_case, stl, Computer, thingiverse
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
J Gonzalez (drokz)
data
eye 0
favorite 0
comment 0
Case for Raspberry Pi CM4 TV Stick by https://twitter.com/magic__smoke https://github.com/magic-blue-smoke/Raspberry-Pi-CM4-TV-Stick This case does not have an opening for the micro sd card, side button, USB switch, or IR receiver.
Topics: thingiverse, CM4, Rasperry_Pi, Electronics, raspberry_pi_case, rpi, stl
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Flávio Caruso (Flaviofrc2020)
data
eye 1
favorite 0
comment 0
This case was developed to use a Raspberry Pi with a 7inch LCD with a resistive touch screen.
Topics: thingiverse, raspberry_pi_case, lcd_case, stl, DIY
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Diego Dyan (Diegodyan)
data
eye 0
favorite 0
comment 0
This is a remix from the amazing design posted by Xavior93. The case has a lot of details but is also easy to print. Check it out: https://www.thingiverse.com/thing:5215750 I dont have a RP4 yet, so I changed the design to fit a 3 or 3B+ version. I uploaded two models: the one I am working on, it has just a USB to power and a RCA conector to output video (the speakers I will try to place inside the case) The other model has a blank square hole, where you can design the holes to the kinds of...
Topics: thingiverse, retro, raspberry, Retrogaming, raspberry_pi_case, Retrocomputer, vintage_computing,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Callan G (GodlikeOne)
data
eye 1
favorite 0
comment 0
Inspired by this https://www.thingiverse.com/thing:5194404 module for this https://www.thingiverse.com/thing:5190496 excellent raspberry pi case. I wanted a 30mm fan housing without the extra holes for GPIO/ribbon cable access.
Topics: raspberry_pi_4, thingiverse, 3D Printer Accessories, raspberry_pi_case, Raspberry_pi_3,...
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
David Krcek (rotecodefraktion)
data
eye 2
favorite 0
comment 0
Raspberry Case for four N2 drives in a Fideco drive case. Case for raspberry (own will follow) https://www.amazon.de/gp/product/B07J9VMNBL/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 Fusion file for own disk drives adjustments https://github.com/rotecodefraktion/3dprint/tree/master/RaspiTower
Topics: 3D Printer Parts, thingiverse, raspi, raspberry_pi_case, Raspberry_Pi, stl
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Lance Hathaway (shadetherapper)
data
eye 1
favorite 0
comment 0
Modified the original by I_am_me to accept m3x10 t nuts for install on an ender 3, as well as replace the plastic tabs with m3x8 bolts. (cap head bolts will friction fit like the plastic tabs did)
Topics: 3D Printer Parts, thingiverse, Raspberry_Pi_Zero, case, Pi_Zero, raspberry_pi_case, Raspberry_Pi,...
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Oz Rocky (OzRocky)
data
eye 0
favorite 0
comment 0
This is a no-nonsense case for a [Pi-4](https://www.raspberrypi.com/products/raspberry-pi-4-model-b/) with [PoE Hat](https://www.raspberrypi.com/products/poe-hat/). (I previously created one for the [Pi3](https://www.thingiverse.com/thing:5155565).) It clips together so no screws are necessary and if you need to mount it somewhere, then there’s also a separate mounting bracket. The PoE Hat is useful to power network attached devices such as the [Pi-hole](https://pi-hole.net/), [Ubiquiti...
Topics: thingiverse, poe, raspberry_pi_case, raspberry_pi_poe, RPI4_Case, Rpi4, Raspberry_Pi, stl, Computer
