3
3.0
Jan 3, 2021
01/21
Jan 3, 2021
by
Phil R (fhogphil)
data
eye 3
favorite 0
comment 0
Added some LEDs that needed more power that RPi could provide. Needed to add a level board, 5V power and wiring for the LEDs. Decided to make a case for it all. This is all self contained. The 5V adapter, and a 4PIN JST connector are press fit into place. A clip holds the RPi securely in place. The fan is bolted on with M2x8 machine bolts. If you are looking at my wiring: YELLOW: data from GPIO10 BLACK: ground RED: 5V GREEN: 3.3V I am powered via POE and a splitter, on the LAN.
Topics: Rpi, cool, stl, Rpi4, Project box, led_strip, raspberry_pi_case, thingiverse, 3D Printer Accessories
10
10.0
Jan 3, 2021
01/21
Jan 3, 2021
by
mcfada (mcfada)
data
eye 10
favorite 0
comment 0
This is a remix of walter's [Sleeve Case for Raspberry Pi B+](http://www.thingiverse.com/thing:604915). I added a mounting feature so it can be secured to 8020 Aluminum Extrusion (aka T-slot). Mine is designed to fit 25mm extrusions with M6 bolts, I also included the step file so you can make small adjustments easily if needed. Original cap still fits my remixed sleeve body. My photos show [Raspberry Pi 3 Model B](http://amzn.to/2lXJKTF) with built in Wi-Fi so I can run...
Topics: Octoprint, Raspberry_pi_3, stl, 8020, Extruded_Aluminum, Tslot, Electronics, aluminum_extrusion,...
4
4.0
Jan 3, 2021
01/21
Jan 3, 2021
by
Christoph Derndorfer-Medosch (ChristophD)
data
eye 4
favorite 0
comment 0
I used dtylerb's great clips (https://www.thingiverse.com/thing:4196202) to mount G0rki's Raspberry Pi 3B case (https://www.thingiverse.com/thing:3293019) with a customized top (https://www.thingiverse.com/thing:4693731) on my Anycubic i3 Mega S. However, since I'm using the Raspberry Pi with a USB cable with an inline power-switch the cable management clip that dtylerb had designed didn't work for me. I therefore took his version and modified it in Tinkercad by replacing the cable guidance...
Topics: cable_management, stl, Anycubic, raspberry_pi_case, thingiverse, 3D Printer Accessories
5
5.0
Jan 3, 2021
01/21
Jan 3, 2021
by
Endertom1 Endertom (Endert0m)
data
eye 5
favorite 0
comment 0
This is a mini desktop like raspberry pi4 case. You will need x8 (M4x8mm) screws and x4 (M4x15mm) screws, then a 50x50x10mm fan (i used an old one from cooler master), two LEDs (one green and one red), and a 100Ω resistor. You will also need x4 tiny screws to hold the raspberry into the case. To spread the light well, you should use some white translucent plastic and a bit of paper in front of the LEDs.
Topics: stl, Computer, raspberry_pi_case, Raspberry_Pi, Raspberry_Pi_Cooling, thingiverse
5
5.0
Jan 3, 2021
01/21
Jan 3, 2021
by
Matthew Lovell (mattlovell)
data
eye 5
favorite 0
comment 0
Modification of https://www.thingiverse.com/thing:4627423 for Waveshare's 4-inch HDMI (H) IPS LCD panel. Note that the wider display means that the base plate for this case is *not* the same width as my earlier case (for a 3.2-inch display)! I used a Raspberry Pi ZeroW to drive the display, but there should also be enough room to use a full-size Model B RPi if needed. Python script for driving the display with InfoLabel's retrieved from Kodi is available on github:...
Topics: stl, kodi, thingiverse, WaveShare, odroid, raspberry pi case, Electronics
7
7.0
Jan 3, 2021
01/21
Jan 3, 2021
by
Andreas F (Sturi2011)
data
eye 7
favorite 0
comment 0
Case for Rhasspy Pi Zero wit Respeaker 2 Mic Array and a small Speaker. Fits in the hole from other DOTs.
Topics: Case, stl, rpi, dot, Pi_Zero, RPi_Zero, respeaker, thingiverse, raspberry_pi_case, Rhasspy,...
4
4.0
Jan 3, 2021
01/21
Jan 3, 2021
by
Fab Pia (fabpi)
data
eye 4
favorite 0
comment 0
Yet another Raspberry PI case, but this time only the base so you can use any heatsink you like. Works with all Raspberry PI 1-4b. It's a remix from https://www.thingiverse.com/thing:3256773 Needs support but can be very thin hope you like it!
Topics: stl, 3D Printer Parts, Ender_3, raspberry_pi_case, Raspberry_Pi, thingiverse, case
3
3.0
Jan 3, 2021
01/21
Jan 3, 2021
by
Carlos Mario Valencia (DonGat0)
data
eye 3
favorite 0
comment 0
This is a case for the Raspberry PI 4, it comes with 2 kinds of GPIO lids, space for a 25mm 5v fan, wich exausts air is collected trough holes in the front of the case. Requires: -4 M2 x 8mm screws -4 M2 nuts -4 M3 x 6mm screws for Fan Designed for 10.5 mm fan height* Only used support on the GPIO lid*
Topics: stl, raspberry_pi_4_case, raspberry_pi_4, raspberry_pi_case, thingiverse, DIY
5
5.0
Jan 3, 2021
01/21
Jan 3, 2021
by
Brandon Kleeman (DaEpicOne)
data
eye 5
favorite 0
comment 0
Remixed from: https://www.thingiverse.com/thing:3416444 https://www.thingiverse.com/thing:3719217 https://www.thingiverse.com/thing:116437 I modified DWS_design's drawers to house a raspberry pi in the top drawer. The pi mount is set deeper into the drawer to help hide any cable spaghetti coming from the pi. The mounts are designed for the Raspberry Pi 3 Model B. The back of the drawer has had slots cut out of it for cabling. If you ever decide you want to mount your pi elsewhere it's as simple...
Topics: Octoprint, octopi, Ender_3_Pro, tools, drawer, Ender, Creality, Ender3, Ender_3, raspberry_pi_case,...
4
4.0
Jan 3, 2021
01/21
Jan 3, 2021
by
Tom Helms (alreadytom)
data
eye 4
favorite 0
comment 0
If you see this anywhere else its not an original. I created this idea and showed others on my Instagram account. You can download it for a limited time but I will pull is off here and put it on my Etsy for a digital download. The most practical way to used the stand is by having some cables pass between the base. This makes for a nice fit and good cable management. Please let others know of this stand. I have no liabilities of you damage your PI LAN port. I have designed the RJ45 plug to...
Topics: cases, Rasberry_Pi3, stl, Pi_case, RJ45_keystone_adapter, RJ45, raspberry_pi_case, Raspberry_Pi,...
4
4.0
Jan 3, 2021
01/21
Jan 3, 2021
by
One Giga (OneGiga)
data
eye 4
favorite 0
comment 0
Raspberry Pi 4 case for the primary use with sink heats. The open design and the elevated position of the board will provide cooling from top and bottom. There are two main options: 1. Standard elevated Case 2. Elevated case with a slot for the GPIO pins and the Camera port.
Topics: stl, raspberry_pi_4_case, raspberry_pi_camera, Computer, raspberry_pi_4, raspberry_pi_case,...
6
6.0
Jan 3, 2021
01/21
Jan 3, 2021
by
Иван Васильков (UltraBomber)
data
eye 6
favorite 0
comment 0
Красивый и функциональный корпус, созданный под Raspberry 3 (любой под-модели), с возможностью установки 2.5 и 3.5 дюймовых дисков (HDD/SSD) Это ремикс - добавлены отверстия для стандартного штекера питания 5.5 мм (5.5*2.0, 5.5*2.5, и тд. тп.) и светодиода (индикатор питания?) Beautiful and functional case designed...
Topics: Raspberry_pi_3, stl, raspberry_pi_case, raspberry_pi_3b, thingiverse, NAS, DIY, Raspberry_pi_3b_case
8
8.0
Jan 3, 2021
01/21
Jan 3, 2021
by
Sebastian Wagner (PCfreak)
data
eye 8
favorite 0
comment 0
Print assemble simple as that
Topics: stl, rpi, 3d_printer, PC, Electronics, thingiverse, rpi0, pi0, raspberry_pi_case, electronics, case
12
12
Jan 3, 2021
01/21
Jan 3, 2021
by
cylgom - (cylgom)
data
eye 12
favorite 0
comment 0
This is a Raspberry Pi Zero case I made for the PassWare project. PassWare is a disconnected hardware password manager able to simulate a keyboard to enter your passwords on another device. This case is quite complex, but allows you to assemble a passware device at home with basic tools while still being able to disassemble it (you don't need hotglue, only tiewraps, screws and screwdrivers). To learn more about PassWare, you can click the [magic link](https://github.com/cylgom/passware).
Topics: hardpass, stl, gadget, password_manager, raspberry, password, Raspberry_Pi, raspberry_pi_case,...
10
10.0
Jan 3, 2021
01/21
Jan 3, 2021
by
Sascha Go (Mr_3D)
data
eye 10
favorite 0
comment 0
I create this case for my 4 channel relay. i add a possibilty to fix the wiring to make it more save, so i have a better feeling when i leave the printer alone :) in the downloads you find also a holdingarm, it fits perfekt for 20x20 alu frame. i have a anet e10 and its great.
Topics: 3D Printing, arduino_relay, stl, 4_Channel_Relay, raspberry_pi_housing, Anet_E10, anet, raspberry,...
8
8.0
Jan 3, 2021
01/21
Jan 3, 2021
by
NICHOLAS SKEBA (cantrollmyrs)
data
eye 8
favorite 0
comment 0
I modified this case to include a little keyring that if using a small enough key ring should keep it shut as my biggest worry with this case was it coming open. It will need some support to print out the key ring section.
Topics: stl, raspberry_pi_case, Raspberry_Pi, thingiverse, Electronics
7
7.0
Jan 3, 2021
01/21
Jan 3, 2021
by
Kevin Loeffler (RedSecond)
data
eye 7
favorite 0
comment 0
This is a Raspberry Pi case featuring the logo of [Storj](https://storj.io), the decentralized cloud storage platform. You can create your own Storj node and start earring Storj tokens [following this handy tutorial I found on their website](https://docs.storj.io/docs/setting-up-storj-share-on-a-raspberry-pi).
Topics: stl, storj, blockchain, raspberry_pi_case, Raspberry_Pi, logo, diy, thingiverse, Electronics
7
7.0
Jan 3, 2021
01/21
Jan 3, 2021
by
Evan Vander Stoep (MrCre8ive)
data
eye 7
favorite 0
comment 0
Looking for a case thats not ment for playing around? Then your in the right place! I designed this case using the thought of having something that was clean and looked great, whilest being mostly ment for work. It was a great build and would love to see your build so please show you made one! Thanks! This model also contains different lids for fans! You dont need a fan but its good to have one!
Topics: Octoprint, Rasberry_Pi3, raspberry_pi_housing, OctoPrint_case, youtube, tiko, 5V_Fan, octopi, case,...
5
5.0
Jan 3, 2021
01/21
Jan 3, 2021
by
Alen Andrlič (alenand)
data
eye 5
favorite 0
comment 0
Just a upper part with raspberry pi logo for lower part V2.
Topics: stl, Ender_3, raspberry_pi_case, Raspberry_Pi, thingiverse, 3D Printer Accessories
6
6.0
Jan 3, 2021
01/21
Jan 3, 2021
by
Ptro 46 (ptro46)
data
eye 6
favorite 0
comment 0
# Case for Raspberry Pi 3B with HAT HifiBerry AMP2. it is an adaptation of [my case](https://www.thingiverse.com/thing:3325342). The location has been left for the power supply that now goes through the HifiBerry as well as the HP connectors and the HDMI jack, otherwise the slots to access the SD card as well as the ethernet and USB jacks are still available . The case has been upgraded to accept the card on the GPIO.
Topics: stl, Computer, thingiverse, hifiberry_digi, raspberry_pi_case, hifiberry_amp, Raspberry_Pi,...
6
6.0
Jan 3, 2021
01/21
Jan 3, 2021
by
Stefan Simis (drstf)
data
eye 6
favorite 0
comment 0
The original design (https://www.thingiverse.com/thing:410003) is untouched except for two additional mounting holes, designed to align with a bracket designed to mount an Ocean Optics STS-VIS spectrometer to a DJI Phantom which can be found here: https://www.thingiverse.com/thing:3420980
Topics: Raspberry_pi_3, stl, Computer, raspberry, raspberry_pi_case, Raspberry_Pi, thingiverse
4
4.0
Jan 4, 2021
01/21
Jan 4, 2021
by
emmett hart (emmett2)
data
eye 4
favorite 0
comment 0
My friend and I made a rocket and a data logger for an engineering project, I wanted to make a case to protect the pi, as the original did not work with the PCB my friend made at PCB Way. Check out the GitHub for the files. https://github.com/sentient-cisco-router/rocket-datalogger Our data logger includes a LSM9DS1 accelerometer and a BMP180 barometer. We have some extra PCB's left over, so if you want one contact me.
Topics: stl, raspberry_pi_case, Raspberry_Pi, thingiverse, Electronics, datalogger
5
5.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Fernando Ramos (monseur_lamo)
data
eye 5
favorite 0
comment 0
This is a Remix of a Remix all praises to them , all i did was add speaker covers and write "Retropie" to bottom of the screen hole and added wo mario mushrooms to the button faceplate to add to the empty space in between buttons hope you guys like them . no other special requirements necesary for after printing but the ocasional cleaning of the piece for smooth operation. The cut notch on the button faceplate is there to fit the button faceplate to the top of the case, due to speaker...
Topics: retropie_case, Retrogaming, Gamehat, stl, Video Games, retro, retropie, raspi, old school, gaming,...
5
5.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Milos Sokolovic (sokol23)
data
eye 5
favorite 0
comment 0
Raspberry Pi Zero case for aluminium extrusion
Topics: 3D Printing, stl, raspberry_pi_case, Raspberry_Pi, thingiverse, Raspberry_Pi_Zero
11
11
Jan 4, 2021
01/21
Jan 4, 2021
by
(sjogerst)
data
eye 11
favorite 0
comment 0
Raspberry Pi 4 Case constructed off of user JasonDentler's Raspberry Pi 4 reference model.
Topics: stl, raspberry_pi_4, raspberry_pi_case, Raspberry_Pi, thingiverse, Engineering
5
5.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Patrick Lavelle (NotLikeALeafOnTheWind)
data
eye 5
favorite 0
comment 0
A 8020 Series 10 based bumper for the Raspberry Pi 4 with space for a half height proto board. It can be used with any device that shares the same footprint as the RPI4.
Topics: 8020_1010, stl, 8020 series 10, 8020, raspberry pi 3, prototype, aluminum_extrusion, raspberry pi...
3
3.0
Jan 4, 2021
01/21
Jan 4, 2021
by
William Bakke (RavenHawkTech)
data
eye 3
favorite 0
comment 0
I wanted a mountable Raspberry Pi Zero W Case for my home lab. saw a couple but wanted something that fit my needs a little better so I made this case.
Topics: Case, 3D Printing, Pi_zero_W_Case, stl, Raspberry_Pi _Case, Mountable_Case, Raspberry_Pi_Zero_W,...
5
5.0
Jan 4, 2021
01/21
Jan 4, 2021
by
James Covey (zajako)
data
eye 5
favorite 0
comment 0
I loved many features from several of the Pi cases on this site, but wasn't 100% happy with any specific ones for my Taz 6. So I took bits from each of them and made one I am quite happy with. For the Pi Camera to reach to the other side of the device you need to buy an extended cable, I purchased this one: https://www.amazon.com/gp/product/B07J68TJ7L/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 I also ran the cable between the computer box and frame as seen in the 2nd picture so as to...
Topics: Octoprint, Octoprint_cam, Lulzbot_Taz_6, stl, Octopi_camera, raspberry_pi_camera,...
5
5.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Sean Goodman (amarand)
data
eye 5
favorite 0
comment 0
I love this case! https://www.amazon.com/Smraza-Raspberry-Acrylic-Heatsinks-Included/dp/B07TSMSCCF/ For what I'm using it for, which is basically a timelapse camera for my Miracle Gro Twelve system (PLANTS!), it's perfect! What's the biggest problem with the Raspberry Pi 4? Well, besides an inability to boot directly off of the SSD, it's the fact that the MicroSD card slot is SO SLOW regardless of the card you use. Upgrading to a USB 3.0 (yay USB 3.0!) SATA adapter and connecting an SSD (even a...
Topics: Raspberry Pi Case, stl, rpi, Computer, Raspberry Pi, connector, SSD, adapter, thingiverse, end cap
4
4.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Nathan Kesecker (fuferman)
data
eye 4
favorite 0
comment 0
This is a box to remotely mount your control box and lcd for the ender 3. The bottom layer holds a raspberry pi and 3 standard buck converters. you can run the pi off of a buck converter or it has a slot for a power cord. it also has a slot for the ribbon cable to a pi cam. It takes a standard 80mm pc case fan witch I run off one of the buck converters to adjust the speed so it's not so loud. it is meant to have positive airflow that comes in at the fan directly on the control board then goes...
Topics: Control_box, stl, creality_ender_3, 3D Printer Parts, Ender, Ender_3, raspberry_pi_case,...
4
4.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Joseph Arnold (flyattack)
data
eye 4
favorite 0
comment 0
PiMesh4 is a Raspberry Pi 4 case with a geometric mesh pattern that is easy to print. This is a mostly toolless design with a friction fit. There are two versions of the model – one totally toolless – one that utilizes a single m2 countersunk screw 10-16mm in lenth (recommended). This is designed for 3d printing and utilizes no supports and utilizes only 25 grams of filament. To assemble the case: 1) First, insert the Raspberry Pi 4, insert the corner with the ethernet port first, then set...
Topics: raspberrypi4_case, stl, raspberry_pi_4_case, raspberry_pi_4, raspberry_pi_case, Raspberry_Pi,...
4
4.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Martin Willi (mawi86)
data
eye 4
favorite 0
comment 0
This is an Remix of the Case (https://www.thingiverse.com/thing:4146052) with the Logo PI and Raspberrymatic.
Topics: CCU3, Raspberrymatic, Homematic_IP, Raspberry_pi_3, stl, homematic_case, Homematic, Rings,...
4
4.0
Jan 4, 2021
01/21
Jan 4, 2021
by
MOREL Matthieu (momosmokard)
data
eye 4
favorite 0
comment 0
Raspberry Pi case compatible with Versions 2 and 3. GPIO is not realy accessible with this design, more oriented for a mediacenter use. You will need 8x M3 brass inserts like the ones on the picture, and of course screws (4x M3L6 & 4x M3L10) ; one in each 4mm hole. The 4 holes of the Rpi have to be slightly enlarged with a 3mm drill bit. Bon't worry about it, it won't break anything and it is really easy to do, even by hand. It is possible to print the top of the case with two colors. To...
Topics: raspberry_pi_case, DIY, stl, thingiverse
3
3.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Stimpson J Cat (Stimpson_J_Cat)
data
eye 3
favorite 0
comment 0
This mount is different in that you can slide your existing Pi in its case into this mount. All the ones I found made you mount your Pi board into their mount so if you needed to access, you had to unscrew the whole mount from the back of the monitor. All sides open for access to ports (except for SD card - you have to remove from the mount for that) and top open for cooling. VESA 100 spacing.
Topics: stl, Computer, raspberry_pi_case, Raspberry_Pi, thingiverse
4
4.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Matthias Cramer (crami)
data
eye 4
favorite 0
comment 0
Parts for a stopmotion camera rail
Topics: Parts, stl, raspberry_pi_case, Raspberry_Pi, thingiverse, Camera_Rail
13
13
Jan 4, 2021
01/21
Jan 4, 2021
by
Northern Layers (NorthernLayers)
data
eye 13
favorite 0
comment 0
I needed a case for the raspberry pi that was configurable for the application. There is a case with mount holes and without mount holes and a plain lid and a lid with a camera ball. Have fun and feedback is always appreciated. Released through my company Northern Layers: http://northernlayers.com Cheers!
Topics: stl, raspberry_pi_2, electronics_case, raspberry_pi_b, Electronics, raspberry, raspberry_pi_case,...
3
3.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Fabian Exel (fabske)
data
eye 3
favorite 0
comment 0
This is my little build of a Raspberry Pi 4 B matched with the official 7" display and the official Camera V2.1. It's my second attempt to build a portable Raspberry Pi. The first one was build completely with wood, the felt and the wood on the backside are leftovers from it. I suggest that you build yourself a similar housing for the display, because this is much more secure than using only this 3d-printed case from me. Sorry, but I was simply to lazy to make also a printed back panel for...
Topics: camera_mount, stl, raspberry_pi_4_case, raspberry_pi_camera, raspberry_pi_4, Electronics,...
3
3.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Dany Stok (Dohentai)
data
eye 3
favorite 0
comment 0
A Raspberry PI 3A+ CASE I've download the original design a while ago and i did some modify like the top and bottom vents. I don't remember the original creator.so, if you find the original i will add the credits to him/her .
Topics: Raspberry_pi_3, stl, Hobby, raspberry, raspberry_pi_case, thingiverse
4
4.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Scott Gibb (ScottGibb)
data
eye 4
favorite 0
comment 0
Simple Raspberry Pi Zero case with two possible lids. One lid has mounting holes for a 17mm fan. There is access to both USB slots as well as the HDMI port and sd card slot.
Topics: stl, Electronics, raspberry_pi_case, case, thingiverse, Raspberry_Pi_Zero
9
9.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Morgan Lowe (morganlowe)
data
eye 9
favorite 0
comment 0
#The Official Pi4 Version of the [Super Retropiepod](https://www.thingiverse.com/thing:3293876) Otherwise it's all the same as the older version, so here's the instructions: #Gerber Files For Button Boards Included! You can send the two RAR archives to your favorite PCB maker to get them made, or make them yourself! I use https://jlcpcb.com/ because it's cheap and fast, but the minimum order is 10pcs. I will be listing my spares on Ebay and will link it here. I spent a lot of money developing...
Topics: stl, pigrrl, Rpi4, Video Games, raspberry_pi_case, Raspberry_Pi, thingiverse, nintendo, PiGRRL2
3
3.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Dan Russell (Arnookie)
data
eye 3
favorite 0
comment 0
I redesigned the Display mount for Vertical orientation. Original found here made by Tronnic https://www.thingiverse.com/thing:3030160 You will need the back case to use this mount from the link above.
Topics: Raspberry_pi_3, stl, creality_ender_3, CR10, vertical screen mount, CR-10, 3D Printer Parts,...
6
6.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Vladimir Usoltsev (Vladimir_U)
data
eye 6
favorite 0
comment 0
Кайс для raspberry pi 3 Логотип Денди криклеен к верхней крышке. потребуется короткий удлинитель hdmi Малогабаритый блок питания 5В, 2А Кнопка с фиксацией и подсветкой. Вентилятор 40х40 на 12 вольт, с решеткой. разъем питания 220в. винты м3 с потайной головкой + гайки Case for raspberry pi 3 The Dandy logo...
Topics: Retrogaming, stl, ulti steel, dendy, retropie, raspberry_pi_case, Raspberry_Pi, RecalBox,...
4
4.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Florin Ursu (gfursu)
data
eye 4
favorite 0
comment 0
I liked the design put together from a number of parts. Problem is that it's just put together, not re-designed, so I changed the base connector to make it adequate. If you choose to use this, I strongly suggest you also change the base to allow for frontal mount rather than side mount, I provided another mod here: https://www.thingiverse.com/thing:4603398
Topics: stl, raspberry_pi_camera, raspberry_pi_case, thingiverse, 3D Printer Accessories
4
4.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Ronny Seidenstuecker (RonnyS)
data
eye 4
favorite 0
comment 0
This case is inspired by [0110-M-P's design of a Raspberry Pi case](https://www.thingiverse.com/thing:922740) #### Features - VESA mount (75mm x 75mm) - Internal fan mount (40mm x 40mm x10) - Thread inserts (case and pi mounts) - Footer pins #### Required parts - Raspberry Pi 3 (B/B+) - Fan 40x40x10, 5V → [Noctua NF-A4x10 5V incl. anti-vibration mounts](https://www.amazon.de/Noctua-NF-A4X10-FLX-5V-computer-components/dp/B00NEMGCIA?language=en_GB&cy=EUR) - 4x Anti-vibration mounts (See...
Topics: pi 3, Raspberry_pi_3, stl, fan, Raspberry Pi, threaded_insert, vesa, VESA_75, vesa_mount, 40mm_fan,...
3
3.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Why Do You Need To Know All This (Okxa)
data
eye 3
favorite 0
comment 0
Modified snap fit case for Raspberry Pi 3. It has a solid backside, and air vents + holes for the camera/screen cables on the topside. Remixed from [Pi 3 Case Slotted](https://www.thingiverse.com/thing:2791605) and the original case: [RASPBERRY PI 3 Snap Fit Case](https://www.thingiverse.com/thing:2096317)
Topics: Raspberry_pi_3, stl, raspi, Electronics, raspberry_pi_case, thingiverse, case
4
4.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Ash Wr (AshTheMaker)
data
eye 4
favorite 0
comment 0
This is my original design inspired by John Sinclair's idea of showing the infill of the print (www.thingiverse.com/thing:3723481). This is a later version of my 60mm fan snapfit case design and features a screwless design that allows the Pi and fan to clip into place. The whole case also snaps together nicely and comes apart by squeezing it along the longest sides. To get the cool mesh make sure you print with 0 top or bottom layers and use a 2D infill pattern, I used the triangle infill...
Topics: stl, glueless, Raspberry_Pi_4_B, fan, snapfit, screwless, Electronics, thingiverse, raspberry,...
4
4.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Spyros S (Spyross)
data
eye 4
favorite 0
comment 0
Made a simple case for the Raspberry Pi 4B, it features: open GPIO ports for easy access space for heat sinks fits two 10x10x40mm fans (I used the GeeekPi DC 5V Brushless RGB) sinked screws- sd slot access (or not) You wild need: an adapter to connect both fans 4x2,5mm screws Please give me feedback if i should change or add anything. A tip would be much appreciated.
Topics: stl, raspberry_pi_4, Raspberry_Case, raspberry_pi_case, Raspberry_Pi, thingiverse, Electronics
3
3.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Sven Steinert (sharkymoto)
data
eye 3
favorite 0
comment 0
This is an fully parametric designed case that you can customize to fit your projects. Download the File, open in Fusion360 and change the parameters to fit the dimensions to your needs. You can create cutouts, mounting points ect. as needed without having to do the tideous modeling first. i got losely inspired to this by Adafruits youtube channel, but i've constructed it myself from memory purely as an exercise to see if i got the points they make in the video. Have fun printing and feel free...
Topics: enclosure, stl, Hobby, customizable, snapfit, pcb, raspberry_pi_case, arduino_case, thingiverse,...
3
3.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Sebastian Sombra (ssombra)
data
eye 3
favorite 0
comment 0
I didn't find a case for the [UCTRONIC HDMI Touch Screen](https://www.amazon.com/gp/product/B076M399XX/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1) so I remixed dakota323421's case to make it work for my screen. I needed to move some openings and also I changed the bottom (it was open in the original design, which I think is very prone to shorts). It was a quick and dirty work and my CAD skills are very limited but it works. I am also sharing the step files in case that other more...
Topics: Raspberry_pi_3, stl, HDMI, raspberry_pi_case, Raspberry_Pi, thingiverse, Electronics, octopi_case
4
4.0
Jan 4, 2021
01/21
Jan 4, 2021
by
Julien Bibi (thingibibi69)
data
eye 4
favorite 0
comment 0
Raspberry case for Model 3 B+ Touchescreen: http://spotpear.com/index/study/detail/id/142.html Enjoy !
Topics: stl, raspberry_touchscreen, 3D Printer Parts, pi 3 case, raspberry, raspberry_pi_case,...
