11
11
Jan 11, 2021
01/21
by
Tom Crites (t1dTom)
data
eye 11
favorite 0
comment 0
Adjustable housing for a Raspberry Pi display with Pi Camera holder. The parts are assembled with M3-.50 X16 pan head machine screws and nuts.
Topics: thingiverse, raspberry_pi_housing, stl, Other, Raspberry_Pi
10
10.0
Mar 21, 2021
03/21
by
Carlos Ponce (Carlitros)
data
eye 10
favorite 0
comment 0
A friend request me a mount for his Raspberry inside a box buyed from internet dealer. It is not much usefull for other porpouses, but may be someone get any new idea for his/her designs from here. The only special target was to built a design without screws... Done!!!! :)
Topics: stl, Raspberry_Pi_2, Electronics, raspberry_pi_housing, thingiverse
9
9.0
Mar 10, 2021
03/21
by
Steve Tan (steve0hh)
data
eye 9
favorite 0
comment 0
Basically the original model (http://www.thingiverse.com/thing:608169) is too large to be printed on a printrbot play. Therefore I've cut it up to be printed separately and glued together afterwards. Uploaded this design so you guys don't have to repeat this process again. Enjoy.
Topics: Electronics, raspberry_pi_case, stl, thingiverse, raspberry_pi_housing
8
8.0
Apr 17, 2021
04/21
by
Jason MK2 (Jason3030)
data
eye 8
favorite 0
comment 0
I am setting up a linux desktop for my Son using a raspberry pi 3, but I wanted a meaningful case for him.... Since my Son really loves Dr. Who, I modified this TARDIS to allow the mounting of a pi3 inside it. Holes had to be cut into the right side to allow hdmi out, and the windows in the rear had the window panes removed to allow USB cables to exit. There are also 4 circular holes in the rear to allow you to place (optional) nuts for the screws to screw into. There are two files now: 1....
Topics: thingiverse, stl, Computer, raspberry_pi_housing, Raspberry_pi_3
10
10.0
Jan 10, 2021
01/21
by
Matt Stir (Mattstir)
data
eye 10
favorite 0
comment 0
Simple mount for the Raspberry PI Mountable on something else with just one screw.
Topics: thingiverse, screw, raspberry_pi_housing, stl, mount, DIY, Raspberry_Pi
9
9.0
Apr 28, 2021
04/21
by
Neg Sol (NegSol)
data
eye 9
favorite 0
comment 0
I remixed the top "Raspberry Pi 3, Pi 2, and Model B+ case with VESA mounts and more" to add a hole for my switch and button application (mainly reset duty). The hole is now 7.4 mm in diameter (not 9mm like the source). It works great for small toggle switches (6mm) and buttons (7.2mm) - see photos. Printed with supports in PLA 15% infill 2 shells - Flashforge Pro Printer Supports should only be necessary for the new hole area!
Topics: thingiverse, stl, raspberry_pi_housing, Electronics, raspberry_pi_case, raspi
8
8.0
Apr 18, 2021
04/21
by
Benni Grossho (makerschrott1)
data
eye 8
favorite 0
comment 0
My first(!) project. its an housing for the raspberry pi, to make a camera. Parts i used: 1 raspberry pi 3 ;-) 1 adafruit powerboost 1000c 2 18650 lithium batteries connected parallel 1 Display (conrad art.nr.: 1380381) 1 switch (conrad art.nr.: 1566132) 1 tactile switch (conrad art.nr.: 706175) 1 dc female plug (conrad art.nr.: 733946) if you want to use this display, you need the file waveshare32b.dtb https://github.com/swkim01/waveshare-dtoverlays and the framebuffercopyprogram fbcp...
Topics: Raspberry_Pi, thingiverse, stl, raspberry, raspberry_pi_housing, camera, Electronics
8
8.0
Apr 17, 2021
04/21
by
Brom McCullough (bromraven)
data
eye 8
favorite 0
comment 0
Before you print out the model in cura or whichever splicing platform you are using, lay it flat for a better print then print it and secure to Raspberry Pi 3b with these standoffs https://www.ebay.com/itm/Geekworm-Raspberry-Pi-120-Pcs-Lot-M2-5-Series-Hex-Brass-Spacer-Standoff-Nu/173154221078?hash=item2850cbbc16:g:yzkAAOSwbP1agF9R If I messed anything up in this design please tell me I want to improve this design.
Topics: Raspberry_Pi, thingiverse, stl, Computer, raspberry_pi_housing, Rasberry_Pi3
9
9.0
Apr 26, 2021
04/21
by
(3dx)
data
eye 9
favorite 0
comment 0
Raspberry PI - Rackmount frame Now you can mount multiple Raspberry PI boards on a rack! Two parts only, you need to choose the Left or Right file. 1. Board frame 2. Left side mounting bracket 3. Right side mounting bracket
Topics: Computer, thingiverse, Raspberry_Pi, stl, raspberry_pi_housing, mounting_bracket
10
10.0
Apr 30, 2021
04/21
by
Keith Weiland (MightyMouth)
data
eye 10
favorite 0
comment 0
A Simple Raspberry Pi Case
Topics: stl, Computer, Raspberry_Pi, raspberry_pi_housing, thingiverse, raspberry_pi_case
10
10.0
Apr 21, 2021
04/21
by
Erik Lembke (unic8)
data
eye 10
favorite 0
comment 0
This is a closed top for the "Raspberry Pi Zero Enclosure - Noe Ruiz - Adafruit" http://www.thingiverse.com/thing:1157198 No opening for the gpio pin headers. Raspberry Pi Zero https://www.raspberrypi.org/products/pi-zero/ Designing Raspberry Pi Zero 3D Printed Enclosure https://blog.adafruit.com/2015/11/26/designing-raspberry-pi-zero-3d-printed-enclosure/
Topics: thingiverse, raspberry_pi_case, stl, Electronics, Raspberry_Pi, raspberry_pi_housing
12
12
Apr 16, 2021
04/21
by
Nao (n602)
data
eye 12
favorite 0
comment 0
This display stand frame was designed for Raspberry Pi Official 7 inch TouchScreen with PIMORONI's acrylic resin frame. It is substitutive part for PIMORONI's acrylic triangular cutouts in brief. . -The official Raspberry Pi touch display https://www.raspberrypi.org/blog/the-eagerly-awaited-raspberry-pi-display/ -Raspberry Pi 7" Touchscreen Display with Stand https://shop.pimoroni.com/collections/displays/products/raspberry-pi-7-touchscreen-display-with-frame --- instruction for...
Topics: Raspberry_Pi, thingiverse, stl, Computer, raspberry_pi_housing, raspberry_pi_case
9
9.0
Jan 13, 2021
01/21
by
Nao (n602)
data
eye 9
favorite 0
comment 0
This thing was designed based on https://www.thingiverse.com/thing:803447. And for "Official 7inch LCD frame and stand 2" https://www.thingiverse.com/thing:2347633 There are several variations. And there are things of experimental design among them. Please find "box_247_readme.pdf" and read it. -PLAN-1; box_247_bdy.stl & box_247_cvr1.stl Jumper-wire(for bread-board) ready but not for GPIO flat cable & connector. -PLAN-2; box_247_bdy.stl & box_247_cvr2.stl GPIO...
Topics: thingiverse, raspberry_pi_housing, stl, Computer, raspberry_pi_case, Raspberry_Pi
8
8.0
Jan 17, 2021
01/21
by
Tom Greening (tgreening)
data
eye 8
favorite 0
comment 0
I made these standoffs to mount the PI and its case to the back of my monitor. They're made to fit the cases floating around that have the standard VESA mounts. They press fit in the holes, sort of, depending on the accuracy of your printer, and are meant to have double-sided 3M sticky tape applied to the foot end for attaching to the monitor. An alternative to a press fit is to make the pin slightly undersized so the case will just slide on/off easily and use small o-rings on them to keep the...
Topics: Electronics, raspberry_pi_case, Raspberry_Pi, thingiverse, stl, raspberry_pi_housing
10
10.0
Apr 22, 2021
04/21
by
Lukas (lukie80)
data
eye 10
favorite 0
comment 0
Another Raspberry Pi B+ / Pi 2 case. The differences to all those _great cases out there on Thingiverse_ are: - Self centering clam-shell design: Light will not shine though the gaps, robust enclosure - No lateral space limitation for heat sinks - Additional round 5mm hole for some GPIO cables - Combines features of other cases: - The holes are well fit within an intentional tolerance of 0.5mm - Well tightened by common 10mm M3 screws and nuts - By using longer screws case can be stacked - see...
Topics: stl, thingiverse, raspberry_pi_housing, raspberry_pi_case, 3D Printer Accessories
9
9.0
Apr 28, 2021
04/21
by
Ryan Rose (ryborg)
data
eye 9
favorite 0
comment 0
Extremely Low Profile Top for the Raspberry Pi Zero v1 (No Camera Header) I created this to use in conjunction with this pi zero dongle bottom: http://www.thingiverse.com/thing:1836302 This is a very small and detailed model, so you will need to use your printers highest settings for best results. I used .05μm on Prusa i3 MK2
Topics: thingiverse, Raspberry_Pi, Raspberry_Pi_Zero, stl, raspberry_pi_housing, Electronics
4
4.0
Apr 12, 2021
04/21
by
Tyler (Teece)
data
eye 4
favorite 0
comment 0
Here we have a Raspberry Pi loaded with XBMC running on a small widescreen 4.3" LCD all in a small desktop enclosure. I wanted something for my desk at work to watch news or listen to music and so piTV was born. Parts listed below: -Raspberry Pi Model B with XBMC -RCA video cable, 90 degree (left angle) preferred but standard will work if you cut some off the wire housing. -Headphone extender. -LCD: http://www.amazon.com/gp/product/B00IUGW7PM/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1...
Topics: thingiverse, Raspberry_Pi, raspberry_pi_housing, raspberry_pi_case, stl, Electronics
7
7.0
Apr 8, 2021
04/21
by
(nick1984)
data
eye 7
favorite 0
comment 0
A raspberry pi case with removable lid
Topics: raspberry, Electronics, raspberry_pi_housing, stl, Raspberry_Pi, thingiverse, raspberry_pi_case
16
16
Jan 18, 2021
01/21
by
Janco notneeded (jancoow)
data
eye 16
favorite 0
comment 0
Raspberry Pi Cover. There is not bottom place, it's meant to be placed as top-cover. I'm using it with my Yamaha Receiver clips so I can snap a raspberry pi on my receiver.
Topics: Electronics, raspberry_pi_case, Raspberry_Pi, thingiverse, stl, raspberry_pi_housing
17
17
Jan 10, 2021
01/21
by
Phillip Jones (ThatGuyPhil)
data
eye 17
favorite 0
comment 0
A simple Raspberry Pi slot holder. I wanted a compact, simple and convenient way of mounting my Pi to my monitor, which also allowed me to easily remove it if need be. This design uses one of four available (VESA) screw holes in the back of your monitor/screen (I used an M4 x 12 Screw). Screw it to your monitor/screen and simply slide your Pi into the slots. Your are still able to access all ports (GPIO, HDMI, power and SD card) whilst it is inserted. I have only tested this with my Raspberry...
Topics: thingiverse, 3D Printing, raspberry_pi_housing, stl, raspberry_pi_case, Raspberry_Pi
8
8.0
Jan 15, 2021
01/21
by
Jeremy Stansfield (blacklyquid)
data
eye 8
favorite 0
comment 0
Trying to build a pie of pi's. I am using a couple pi's and an odroid, wanted to make a nice enclosure for them. Work in progress.
Topics: thingiverse, Electronics, raspberry_pi_housing, stl, raspberry_pi_case, Raspberry_pi_3
12
12
Mar 21, 2021
03/21
by
josh Sorell (mrpilextruder)
data
eye 12
favorite 0
comment 0
I made a something to surround my raspberry pi. I tried to make the top piece clip onto the bottom but it didn't work very well so I need to add places for screw holes perhaps.
Topics: stl, raspberry_pi_case, Raspberry_Pi_2, Electronics, raspberry_pi_housing, thingiverse
11
11
Jan 18, 2021
01/21
by
Tom Simpson (tslove28)
data
eye 11
favorite 0
comment 0
Basic case for a Raspberry Pi 3. It doesn't require screws, and will fit the ribbon cable for the breakout board I use. it has easy access to the SD Card, and Camera Ports. Does not require support.
Topics: raspberry_pi_case, thingiverse, Raspberry_pi_3, Computer, stl, raspberry_pi_housing
11
11
Apr 28, 2021
04/21
by
Eduardo Arana (arananet)
data
eye 11
favorite 0
comment 0
Les presento a ENIAC PI, una carcasa para convertir la RPI en un ordenador de sobremesa completamente funcional y práctico. Esta caja tiene un diseño único que permite colocar un teclado bluetooth y utilizarlo tanto con una RPI 2 como con una RPI3. Dispone de las entradas y salidas necesarias para poder utilizarla (USB, RED, A/V, ALIMENTACIÓN, HDMI) Por favor, si vas a utilizar el diseño, recuerda respetar el copyright. Muchas gracias. Más información, en mi blog,...
Topics: Computer, thingiverse, ENIAC, Raspberry_Pi, stl, raspberry_pi_housing, acrylic, customized, rpi
4
4.0
Apr 5, 2021
04/21
by
Mario Loritz (cyrusdreams)
data
eye 4
favorite 0
comment 0
This is a modified back cover for the Raspberry Pi4 + 7" touchscreen housing, sold as the RPI4 CASE LDC7BK, the RPi4TSCBlk or the "NeeGo" housing. It clips onto the back similar to the original cover. It enables - with some modifications to the original shell - to use the NW Digital Radio DRAWS hat with the Raspberry Pi and the 7" touchscreen in a neat pack. The design files are included, so you can modify the Thing to your needs.
Topics: thingiverse, stl, raspberry_pi_housing, Computer, Ham_Radio, Raspberry_Pi, RPi_Touchscreen
10
10.0
Apr 17, 2021
04/21
by
Janco notneeded (jancoow)
data
eye 10
favorite 0
comment 0
Simple snap-on clips for mounting a Raspberry Pi on the Yamaha receiver. Snaps on easily on all the ventilation holes without drilling holes or using screws. However, you need screws to screw it on your pi. This mount is compatible with my Raspberry Pi Cover.
Topics: Raspberry_Pi, receiver, thingiverse, stl, Receiver_Mount, raspberry_pi_housing, yamaha, Electronics
5
5.0
Apr 8, 2021
04/21
by
(xmbrst)
data
eye 5
favorite 0
comment 0
This remix of HansH's case makes room for a [Pimoroni PiGlow](http://www.adafruit.com/products/1488). The leaves in the raspberry logo have been expanded to display the PiGlow, and the GPIO opening on the side has been widened to make room for the edge of the PiGlow board. I've also added feet with holes to make it easy to clip it to a shelf.
Topics: Electronics, piglow, raspberry_pi_housing, stl, Raspberry_Pi, thingiverse, raspberry_pi_case,...
6
6.0
Jan 21, 2021
01/21
by
Jonathan Mercier (spool2kool)
data
eye 6
favorite 0
comment 0
for rpi 7 inch touch screen... https://www.newark.com/raspberry-pi/raspberrypi-display/display-7-touch-screen-rpi-sbc/dp/49Y1712 uses a 40mm fan ex.: (not the one I used; I used one off a bad 3D printer extruder module)...
Topics: Electronics, rpi, raspberry_pi_case, Raspberry_Pi, thingiverse, stl, raspberry_pi_housing
3
3.0
Jan 18, 2022
01/22
by
Jerry Qu (HedgyPuppy)
data
eye 3
favorite 0
comment 0
Use at your own risk. I couldn't find screws at the right length for the size of these holes, so I made do with armature wire. I've included the Solidworks part file for editing. Feel free to remix it to fit your needs! Printed at 50% infill PLA
Topics: thingiverse, raspberry_pi_housing, case lcd, stat screen, DIY, Case screen, stl
10
10.0
Jun 20, 2021
06/21
by
Michael Sendrowski (MicMak)
data
eye 10
favorite 0
comment 0
The idea was to create a new housing. For other chassis, the lid did not hold fast or loosened quickly. Other cases had on the ground the vents. So the raspberry frequently crash caused of heating probs. After I use the housing without a lid, the Raspberry Pi works without problems for weeks. So I wanted a housing that: > Did not fall apart > is cheap and saves material > Enough ventilation grilles > Easy to print > Easy to assemble and without gluing and without screws (except...
Topics: thingiverse, 3D_puzzle, stl, 3D Printing, case, awesome, Raspberry_Pi, raspberry_pi_housing
8
8.0
Jan 19, 2021
01/21
by
Leo Mauler (webgiant)
data
eye 8
favorite 0
comment 0
This is a Raspberry Pi stand, for case https://www.thingiverse.com/thing:1895374, sealed with the seals I created for this case, https://www.thingiverse.com/thing:2894542. Plenty of air space for venting heat. Opening at the bottom of the stand allows for easy access to the ports on the Raspberry Pi.
Topics: Electronics, raspberry_pi_case, Raspberry_Pi, thingiverse, RaspberryPi, raspberry, stl,...
8
8.0
Jan 16, 2021
01/21
by
Fabian Speith (thunderbird18j)
data
eye 8
favorite 0
comment 0
Remix Version. Höhere Version + Anpassungen zur Verwendung mit Geekworm UPS HAT.
Topics: rasperrypi, raspberry_pi_case, thingiverse, Raspberry_pi_3, Computer, stl, raspberry_pi_housing
10
10.0
Apr 23, 2021
04/21
by
Chris Wilson (Credo)
data
eye 10
favorite 0
comment 0
I Bought an acrylic case for my Pi a while ago it was a great design - but it broke. I don't know why I didn't think of this sooner, but I ended up designing it so the exact case could be 3D printed. I made some modifications which made it better than the original. This will work with the Raspberry Pi B+ and the Raspberry Pi 2. The lid is hinged, so you can get at the pins without taking it apart. I will be designing a bracket, to be able to stack these, since in my case, I have multiple, I...
Topics: RaspberryPi, stl, Raspberry_Pi_2, thingiverse, raspberry_pi_housing, raspberry_pi_case, Electronics
5
5.0
Mar 3, 2021
03/21
by
Tony Larsson (deDesigned)
data
eye 5
favorite 0
comment 0
Want to learn Fusion 360? Enter your email to receive video lessons where I teach how to model and 3D print your ideas using Fusion 360. Your first name Your email address Send Lessons Created using the enclosure customizer: Custom enclosure creator Parameters used: Width: 115mm Depth: 120 mm Height: 50 mm Wall thickness: 2mm Top ventilation: Yes Bottom ventilation: Yes Holes for feet: Yes Cutouts: None Examples: Create your own enclosure using the customizer here: Custom enclosure creator
Topics: customized, Electronics, thingiverse, housing, enclosure, stl, raspberry_pi_housing,...
4
4.0
Apr 16, 2021
04/21
by
Walter Anderson (wandrson)
data
eye 4
favorite 0
comment 0
This box is design to turn the Raspberry Pi in to a self-contained device in headless mode. Of course the HDMI and USB ports are available so you can connect an external monitor and keyboard/mouse as well. The box is designed to use four external components; an adafruit 1000C USB/Liion charger board, a 3 cell (6600mAH) Liion battery pack, and an sliding SPDT switch, and finally a USB microB connector for powering the Pi. It works with either the B+ or the Pi2 or Pi3 and has room for additional...
Topics: LiIon, Raspberry_Pi, Raspberry_Pi_2, thingiverse, stl, Computer, hinged, raspberry_pi_housing
9
9.0
Apr 24, 2021
04/21
by
Richard Casper (DreadedBunny)
data
eye 9
favorite 0
comment 0
This is a case for the Raspberry Pi 3 (or 2) together with a Western Digital PiDrive. I re-purposed the VESA holes from the original Pi case to secure the bottom two pieces together.
Topics: stl, PiDrive, Raspberry_Pi_2, thingiverse, raspberry_pi_housing, Computer, raspberry_pi_case
12
12
Apr 16, 2021
04/21
by
Dan (DWO-DAN)
data
eye 12
favorite 0
comment 0
Simple quick and easy print case for a B+ only needs minimal harware to assemble
Topics: Raspberry_Pi, case, Raspberry_Pi_2, thingiverse, stl, Computer, raspberry_pi_housing, raspi
9
9.0
Jan 11, 2021
01/21
by
Technicien Raton (Tech-Raton)
data
eye 9
favorite 0
comment 0
A case for raspberry pi + touchscreen. You'll need some jumpers to connect the pi with the touchscreen. Take care of the overhangs, the best way to print it is to put the front on the build surface and add support for the 4 raspberry pi screwmount. you'll need to add some cardboard around the screen to secure it.
Topics: thingiverse, raspberry_pi_housing, stl, 3D Printer Accessories, raspberry_pi_case, Raspberry_Pi
10
10.0
Apr 23, 2021
04/21
by
Roman Stepanov (RomanST)
data
eye 10
favorite 0
comment 0
Not tested yet
Topics: Raspberry_Pi, RaspberryPi, stl, thingiverse, raspberry_pi_housing, case, raspberry_pi_case,...
9
9.0
Jan 12, 2021
01/21
by
Juan Pedro Gonzalez (Juampe)
data
eye 9
favorite 0
comment 0
Another Raspberry Pi Zero case done with FreeCAD. I wanted a tight case with a way to access the SD card. The hardest part to get printed (atleast with Cura) is the ach for the SD access. on my print it need quite some fileing...
Topics: freecad, thingiverse, Electronics, raspberry_pi_housing, stl, Raspberry_Pi_Zero, raspberry_pi_case
12
12
Jan 9, 2021
01/21
by
Aurel Bordewieck (bowilab)
data
eye 12
favorite 0
comment 0
Minimalistic Raspberry Pi Zero case designed to the smallest possible dimensions. Access to SD Card (removing it can be tricky once the Pi is in the case, I use small pliers to pull it out) and CSI port. Some bridging required (approx. 2 cm), a bit of cooling may be useful. Lid snaps on, requires a bit of pressure but holds firmly once attached. Can be easily removed again without tools by lifting it off with one finger at the HDMI port.
Topics: thingiverse, raspberry_pi_housing, stl, Raspberry_Pi_Zero, DIY, raspberry_pi_case, Raspberry_Pi
9
9.0
Jan 10, 2021
01/21
by
Thomas Wade (thomaswade_engineer)
data
eye 9
favorite 0
comment 0
Not intended as a print, but as a tool to help you design your RPiZW case(s) and accessories. The GPIO pinout block is removable.
Topics: Raspberry_Pi_Zero_W, template, thingiverse, Electronics, raspberry_pi_housing, Raspberry_Pi_Zero,...
6
6.0
Apr 18, 2021
04/21
by
akash viswan (akashviswan)
data
eye 6
favorite 0
comment 0
A simple Raspberry Pi case for HTPC uses, it can house a standard 2.5-inch drive also.
Topics: harddisk, Raspberry_Pi, thingiverse, stl, DIY, raspberry_pi_housing, htpc, raspberry_pi_case,...
4
4.0
Mar 20, 2021
03/21
by
Kjell Kernen (Dvogonen)
data
eye 4
favorite 0
comment 0
There are a lot of camera covers for the Pi camera but I needed one that i could mount using simple m3 bolts. I could not find any so I made one. The tolerances of the parts are set so that if you print it on reasonably fine settings it should snap together without any major post processing. I tried a few others and they were almost impossible to snap together since the tolerances were to tight. Updates: 2014-11-07 v1 2014-11-09 v2 Distance between both horizontal and vertical mounting holes...
Topics: Camera, case, raspberry_pi_housing, thingiverse, cover, raspberry_pi_camera, Raspberry_Pi, M3, stl
9
9.0
Apr 30, 2021
04/21
by
Dean B ecker (deanbip)
data
eye 9
favorite 0
comment 0
another case for the pi 3 or 2 . raspberry nuka cola? now has new model with a fan mount please share your make! I am open to suggestions to make this better. dont forget to like!
Topics: stl, Fallout, fallout_4, Computer, Raspberry_Pi, raspberry_pi_housing, thingiverse, Raspberry_Pi_2
8
8.0
Jan 17, 2021
01/21
by
John Grabber (JohnGrabber)
data
eye 8
favorite 0
comment 0
Cover, enclosure for the Raspberry Pi Zero (W) based on the design of the "Original Enclosure" for the Rpi Zero, as i couldn't find something alike in Thingiverse...
Topics: Raspberry_Pi_Zero, raspberry_pi_case, Raspberry_Pi, thingiverse, DIY, stl, raspberry_pi_housing
8
8.0
Apr 17, 2021
04/21
by
Ronald Manganaro (Coldashes)
data
eye 8
favorite 0
comment 0
This stand is used for holding up the official rpi 7in touchscreen. This is the first step that I am taking to design a switch like case for the rpi 7in touchscreen, which will include detachable customized controllers. I would print this one with a brim to ensure that the pointed parts of the feet do not end up peeling up.
Topics: Raspberry_Pi, stand, thingiverse, stl, raspberry_pi_housing, raspberry_pi_case, Video Games
12
12
Jan 18, 2021
01/21
by
BYU AV Engineering (byuoitav)
data
eye 12
favorite 0
comment 0
This is the mounting bracket for a [Raspberry Pi Screen wall mount](https://www.thingiverse.com/thing:2766412) (posted separately). This bracket works with a 3 or 4 gang electrical box. Units are in inches so you may need to scale accordingly in your slicer.
Topics: Electronics, raspberry_pi_case, RaspberryPi_Screen, Raspberry_Pi, thingiverse, stl,...
11
11
Apr 30, 2021
04/21
by
John Esc (johnesc)
data
eye 11
favorite 0
comment 0
Took this awesome My Fav Pi Case Fan Add-on design and made it into an attractive Plex Media Player case add-on! Just awaiting my fan delivery. BTW: Raspberry Pi 3 makes for a great Plex Media Player that can handle audio codecs with Direct Play @ 7.1 surround sound, much better than a Roku, Apple TV, or Fire TV.
Topics: stl, Computer, Raspberry_pi_3, Raspberry_Pi, raspberry_pi_housing, thingiverse, raspberry_pi_case
7
7.0
Jan 20, 2021
01/21
by
Matt Flach (capnmattttt)
data
eye 7
favorite 0
comment 0
Raspberry Pi Zero W Housing. Has space for two LiPo 18650's and an Adafruit powerboost 1000C. Panel has room for three LED's and a power switch. Also includes access to the SD card. Lots of great cases out there, I wanted one that was easy to add too.
Topics: Housing, Raspberry_Pi_Zero, thingiverse, Raspberry pi zero W, Computer, stl, raspberry_pi_housing
