2
2.0
Jan 4, 2021
01/21
by
(2f2)
data
eye 2
favorite 0
comment 0
This kit allows you to force your transmitter sticks to slide on one axle only (instead of two). It is usefull if you have a plane transmitter (4/5/6ch) and want to use it as a RC Car transmitter (2ch). I'm kind of old school and have never been able to adapt to wheel transmitters for RC Cars. I wanted to be able to use the same transmitter both for planes and for cars, so I created this conversion kit that can be easily mounted and removed. It is tailored for a Turnigy 5X but I guess you can...
Topics: R/C Vehicles, conversion, turnigy, stl, RC_plane, old_school, transmitter, RC_car, car,...
3
3.0
Jun 11, 2021
06/21
by
(3D_Truck_Druck)
data
eye 3
favorite 0
comment 0
Summary This is a storage box i made for my 2-Axle Truck. It shall fit direct to 4 holes in the standart frame, you just need to take the skirt holders away for enough clearance.
Topics: rc_scania, rc_truck, Sense_scanner, tamiya_man, tamiya_scania, RC_Car, scania, thingiverse,...
4
4.0
Mar 4, 2021
03/21
by
(Alexby)
data
eye 4
favorite 0
comment 0
Who doesn't need some diamond plate? Made this just to print out and add panels to scale RC trucks. Hope it helps on your projects.
Topics: stl, car_parts, R/C Vehicles, Axial_Scx10, traxxas, Axial, Traxxas_trx4, RC_Car, crawler,...
3
3.0
Mar 5, 2021
03/21
by
(Alexby)
data
eye 3
favorite 0
comment 0
1969 Chevy Pickup Truck VI Wheelbase 313mm Width at door sill is 195mm Overall width 211mm Overall length 511mm I made this body thinner because I've been printing out airplane bodies at .5mm and they print a lot faster and are lighter. This is 1.3 mm in most areas. The hood is much thicker because I had trouble shelling it. The wheel flares are thicker and should add some structural stability. Good news: It is cut up into very printable bits. Bad news: Lot's of parts to glue up. Possible tip....
Topics: classic, truck, crawler, Axial, R/C Vehicles, Traxxas_trx4, RC_truck, rc_crawler, chevrolet, stl,...
4
4.0
Mar 5, 2021
03/21
by
(Alexby)
data
eye 4
favorite 0
comment 0
NOTE: The original Taco I posted is wider and taller to fit an RC chassis. I printed it and didn't like the tall dimensions so I've done this one. This one is exacting to an actual tacoma when viewed from the side but wider to fit the RC chassis. I prefer it. It is a 313mm wheelbase.(AxialSCX10) and it is 190mm wide at the bottom of the doors. Same as the Proline Chevy C10 body. This has also been cut up with printing and minimal support in mind. I also put the windows in because it is so much...
Topics: truck, Toyota_Tacoma, Tacoma, crawler, Axial, toyota, R/C Vehicles, Traxxas_trx4, 2018_Tacoma,...
4
4.0
Mar 18, 2021
03/21
by
(Alexby)
data
eye 4
favorite 0
comment 0
NOTE: Check out Toyota Taco V2. It is this same model but the vertical dimension is fully scale and it has been cut up to print more easily with less support. Inspired by 2017 Toyota Tacoma. Details: 313mm wheelbase. 223mm wide. 493mm long. (not including the rear bumper) 1.5mm wall thickness. No posts on the rear bumper yet. I figured we can all have fun figuring that out. Some supports are only in there to make is easier to print and glue up. They will need to be cut out. As I print I usually...
Topics: Toyota_Tacoma, Tacoma, R/C Vehicles, thingiverse, scale_model, Axial, pickup, Rc_scale, scale,...
4
4.0
Apr 20, 2021
04/21
by
(Alexby)
data
eye 4
favorite 0
comment 0
Made this retro cooler because I have one and love it. Now I have one in 1/10 scale too. Throw it in the bed of your RC crawler. Measures 66X40X44mm. It was one piece but I split it into parts (don't forget to print two handles) Now it is easier to print and uses less filament and you can fill it with mini beers. -A
Topics: thingiverse, stl, RC_Car, scale_model, crawler, R/C Vehicles, cooler, traxxas, Axial, rc_crawler,...
4
4.0
Mar 4, 2021
03/21
by
(Alexby)
data
eye 4
favorite 0
comment 0
1970s style van. I haven't printed it out but I'll add pics if I do. And if you print it out send me pics please. Hope this is a good starting point for an RC project. It's based on a Axial SCX10 313mm wheelbase. It's huge and I will need to slice it into 6 sections to print on my machine.
Topics: crawler, 1970s, scale_model, Traxxas_trx4, 3d_modeling, model_car, thingiverse, truck, RC_Car,...
4
4.0
Mar 4, 2021
03/21
by
(Alexby)
data
eye 4
favorite 0
comment 0
Made this RC body and haven't had the time to print it yet. It's designed to fit an Axial SCX10. The bumpers are just the bumper and no way to attach so you'll need to get creative with that or run other bumpers. Hopefully this is part of a fun project. My printer has a max volume of 145X145X175mm so I'll be printing in sections. You will probably need to do the same. Note: Thanks to redneckfgf who repaired and split the files for printing and those are loaded here too.
Topics: pickup, crawler, Ford_Panel, radio_controlled, model, rc_body, Ford, thingiverse, RC_Car,...
4
4.0
Apr 20, 2021
04/21
by
(Alexby)
data
eye 4
favorite 0
comment 0
This V2 is the same cab as 1969 Chevy Pickup V1 but instead of the truck bed I sized up the flatbed to work with this body. BODY SPECS Wheelbase 313mm Width at door sill is 195mm FLATBED SPECS Width 203mm Length 191mm If you dig it follow, comment, like. Most of what I make are requests so let me know what you're not finding out there. -A
Topics: thingiverse, scale, rc_scale, chevrolet, chevy, pickup, traxxas, Axial, Redcat, Traxxas_trx4,...
6
6.0
Mar 4, 2021
03/21
by
(Alexby)
data
eye 6
favorite 0
comment 0
Inspired by VW Doka. I love these things and want one in real life. They never sold them in the US so pretty hard to find. Designed this body for my SCX10 with a 313mm wheelbase. Add some pins and the tailgate and sidegates open and close. I'm stoked to print and weather the hell out of it. Hope it is a jumping off point for some cool projects. UPDATE: Finally loaded a cut up version. Thanks for the patience.
Topics: rc_body, stl, vw_bus, Axial_Scx10, traxxas, Axial, volkswagon, Traxxas_trx4, vw_van, RC_Car, R/C...
5
5.0
Mar 18, 2021
03/21
by
(Alexby)
data
eye 5
favorite 0
comment 0
My Dodge truck design was screaming for an interior and I finally got around to it. Here's the interior, seat, door panels, dash and steering wheel for the mid 80s Dodge Ram. It's on the printer now so I should have some images soon. The interior fits the Dodge perfectly as it should but I haven't tried it with the dash yet. You can probably size it to work with lot's of other makes and models too. These parts are also available on the Dodge Truck page.
Topics: Steering_wheel, scale, R/C Vehicles, interior, stl, dodge_pickup, dash, Dashboard,...
3
3.0
Mar 5, 2021
03/21
by
(Alexby)
data
eye 3
favorite 0
comment 0
This version is true to the actual dimensions of the Tacoma. Not adjusted for any RC chassis. A lot of people have been asking for this. Also this version has no windows. Specs: Wheelbase 313mm Width at bottom of doors 170mm Length 506mm This is for you bad asses that want to cut it up on your own for printing. One piece cab. One piece bed. If you want to scale it to fit a particular chassis you can scale it in your slicer. The math is easy. If you have a 330mm wheelbase just divide 330 by 313....
Topics: Toyota_Tacoma, scx10, crawler, toyota, R/C Vehicles, Traxxas_trx4, RC_truck, rc_crawler, stl,...
3
3.0
Mar 5, 2021
03/21
by
(Alexby)
data
eye 3
favorite 0
comment 0
It's the iconic aluminum lawn chair. Only smaller. 60mm from arm to arm. Glue on some ribbon as webbing and put it on the shelf. It's pop art ready for the MOMA gift shop. Or throw it in the back of your RC crawler so you can chill between tricky sections. Assemble with wire or eyeglass bolts. • Don't forget to like, comment, follow and post makes. That's the gas. Keep making! -A
Topics: stl, furniture, Model_Furniture, RC_Car, R/C Vehicles, Lawn_chair, folding_chair,...
3
3.0
Mar 5, 2021
03/21
by
(Alexby)
data
eye 3
favorite 0
comment 0
Spare wheel mount for 1/10 scale RC trucks. Fits Axial. Might fit others too. Makes it simple to mount a tire in your truck bed or flatbed. The two parts threaded together when I printed this but it's a tight fits. I added some toothpaste and worked it together little by little. Take your time. Hope this helps with some projects. Give me a like, follow and a comment. That's the gas. -Alex
Topics: stl, R/C Vehicles, RC_Car, Traxxas_trx4, spare_tire, wheels, scale_model, scale_RC_cars, crawler,...
4
4.0
Mar 17, 2021
03/21
by
(Alexby)
data
eye 4
favorite 0
comment 0
You don't need engine sounds for this RC car! The Bollinger B1 is the coolest electric off-road vehicle around. This model is super accurate. It it really is this boxy!! Crazy looking but cool. I designed it to work build as a FULLCAB and a HALFCAB. Just like the real truck. This truck also has huge glass panels in the roof so I left all that open and I plan to put in tinted clear acetate. I need something thick so it doesn't flex. Hit me with ideas. It has almost zero overhangs so it should...
Topics: Electric_Vehicle, scale, Bollinger, R/C Vehicles, truck, stl, scale_model, crawler, SUV, traxxas,...
4
4.0
Mar 4, 2021
03/21
by
(Alexby)
data
eye 4
favorite 0
comment 0
Designed this based on a International Harvester Scout. It's sized to work with an Axial SCX10 with a 313mm wheelbase. I haven't printed it yet and I'll have to slice it into lots of printable bits to make it fit. Then it will require some glue and filler. Have fun with it and make something epic and send me the pics!!
Topics: SUV, 1960s, thingiverse, Radio_Control, R/C Vehicles, toy_car, scale_model, Scout, RC_truck, stl,...
4
4.0
Mar 4, 2021
03/21
by
(Alexby)
data
eye 4
favorite 0
comment 0
The Cessna L-19 Bird Dog was a liaison and observation aircraft made for army after WW2. I designed it to be rubber band powered and it flies OKAY but it weighs a bit much for the rubber band to handle. I will probably upgrade this over time to an electric RC. Wingspan: 510 mm Length: 360 mm Weight empty: 90g (ABS) I've printed a couple already. It is fun and challenging because of the very thin .5 mm walls but they print fast!!!! Good printing practice. You'll want to assemble with...
Topics: toy_airplane, Cessna_172, rubberband, stl, 3D_printing, RC_Car, RC_plane, airforce, DesignProject,...
4
4.0
Mar 17, 2021
03/21
by
(Alexby)
data
eye 4
favorite 0
comment 0
Somebody asked me to try making this and they're sick looking trucks. It's not super accurate but it's pretty cool and Dodge bodies aren't widely available. Loaded up parts and whole model. The wheelbase is 305mm. Sightly small for AxialSCX10. * ADDED THE FLATBED. I freaking love this. So full-on dirtbag. Like me. Throw on a spare tire and a couple Jerry cans and you are ready for Mini Moab! The flatbed is designed to fit Axial SCX10. I haven't printed and tested yet but I will soon. I dig this...
Topics: 1987, rc_crawler, retro, R/C Vehicles, rock_crawler, dodge_ram, thingiverse, scale_model, Axial,...
5
5.0
Jun 19, 2021
06/21
by
(AlffaWolffe)
data
eye 5
favorite 0
comment 0
Summary I had seen other drift tyres on Thingiverse but none suited what I wanted. I don't know much about drift tyres and just made this for fun. The hex is made for 12mm hexes. I have included the step files so anyone can edit it to suit them. The skinny version is 10mm "shorter" than the normal version. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.1 - 0.2 Infill: 20% - 100% Notes: I recommend more perimeters for a longer...
Topics: drift, RC_Car, wheel, thingiverse, stl
2
2.0
Mar 19, 2021
03/21
by
(CDeviant)
data
eye 2
favorite 0
comment 0
**New version coming soon - Integrated bumper / more durable / easier to rewire ** **This is a very easy light you can make using a Harbor freight LED** flashlight that regularly goes for free with a coupon. Harbor freight runs constant coupon ads, and consistently marks this light free with a purchase. There's also a switch, and a couple 5mm LEDs that you can scavenge from the light. I used the 66x10mm LED light that's inside this cheap flashlight. It works great wired directly to the Traxxas...
Topics: radio_controlled, 1/10_scale, R/C Vehicles, night_light, Radio_Control, 1/10, Nightlight, RC_Car,...
3
3.0
Apr 27, 2021
04/21
by
(Carpenter_Zhang)
data
eye 3
favorite 0
comment 0
This project is greatly inspired by Larkin_Michael's martian rover, but there's something I'd like to improve, like a simpler, larger body and servo stearing. This car has 2 versions: differential stearing and servo stearing. For differential stearing version, most parts that you need to buy are simillar to Larkin_Michael's project. More details in the zip file. The car works fine, but I will make some changes to make this easier to build. Video...
Topics: RC_Car, thingiverse, car, stl, rocker_bogie, R/C Vehicles, rover
4
4.0
Jun 19, 2021
06/21
by
(Celil27)
data
eye 4
favorite 0
comment 0
Summary Printed in PETG.
Topics: RC_Car, thingiverse, spare_part, stl, Front
4
4.0
Jun 12, 2021
06/21
by
(Celil27)
data
eye 4
favorite 0
comment 0
Summary I drive with my Robbe Mini Rave in my Garden, and it notice that the Car can not really driven on High Grass, so i decided to do my own Rims and Tires. Print the Wheel with PLA or PETG (highly recommended) with 30% infill and Print the Tires with TPU with 2% infill, i am using Polymakers Polyflex. Update: -i added a tool 2 tight the screws. 3D PRINTING SETTINGS Wheels: Quality: 0.1mm Print Speed: 60mm/s PLA - 220 °C PETG 250 °C Bed 60°C Tires: Quality: 0.1mm Print speed: 50mm/s TPU:...
Topics: wheel, RC_Car, custom_rc_wheel, thingiverse, RC_wheels, wheels, rc_wheel, stl
9
9.0
Jun 11, 2021
06/21
by
(Celil27)
data
eye 9
favorite 0
comment 0
Summary Just a Ramp for 1 : 16 and 1 : 18 RC cars. Print the 2 Parts and glue it together. Don´t forget to mirror the Rampe half 2.stl ;) Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2mm Infill: 15% Filament: Verbatim PLA How I Designed This Autodesk Fusion 360
Topics: fun, outdoor, brushless, RC_Car, thingiverse, race, stl
3
3.0
Mar 5, 2021
03/21
by
(CrawlingFinn)
data
eye 3
favorite 0
comment 0
This is a functional hood hinge for Team Raffee Co. Wrangler Rubicon 5-Door rc-car body. Please note that you have to grind away the fake hinges that are cast to the body and cut open the hood. Be careful and use all necessary safety equipment. I don't take any responsibility if you damage yourselves, the body or anything else while doing that. There are two parts for the hood side half of the hinge. Those pieces are screwed together instead of gluing, that allows you to remove hood afterwards...
Topics: R/C Vehicles, stl, RC_Car, rccrawler, thingiverse
5
5.0
Mar 5, 2021
03/21
by
(CrawlingFinn)
data
eye 5
favorite 0
comment 0
This is a functional tailgate hinge for Team Raffee Co. Wrangler Rubicon 5-Door rc-car body. Please note that you have to grind away the fake hinges that are cast to the body and cut open the tailgate. Be careful and use all necessary safety equipment. I don't take any responsibility if you damage yourselves, the body or anything else while doing that. Might work for other hard bodies as well but has been designed for and tested only with Team Raffee Co. body. Hardware: - 1mm piano wire,...
Topics: R/C Vehicles, stl, RC_Car, rccrawler, thingiverse
4
4.0
Mar 5, 2021
03/21
by
(CrawlingFinn)
data
eye 4
favorite 0
comment 0
This is a functional rear window hinge for Team Raffee Co. Wrangler Rubicon 5-Door rc-car body. Please note that you have to grind away the fake hinges that are cast to the window and body. Be careful and use all necessary safety equipment. I don't take any responsibility if you damage yourselves, the body or anything else while doing that. Might work for other hard bodies as well but has been designed for and tested only with Team Raffee Co. body. Hardware: - 1mm piano wire, approx. 5mm per...
Topics: R/C Vehicles, stl, RC_Car, rccrawler, thingiverse
6
6.0
Jan 21, 2021
01/21
by
(CubeWerks)
data
eye 6
favorite 0
comment 0
Arduino code is in the zipped file. Components are shown in the diagram. This is a work in progress and in it's current state the gears begin to melt due to too much rev / throttle. I've geared it down as much as I can, maybe the code can be tweaked? I placed only one STL file in here so Thingiverse will accept my submission, but please ignore it, download the STEP file, and use that to export the parts to STL (this ensures you have my most up to date parts) Thanks!
Topics: R/C Vehicles, stl, RC_Car, thingiverse
3
3.0
Jun 12, 2021
06/21
by
(DIYYER)
data
eye 3
favorite 0
comment 0
Summary This is my DIY cardboard RC tank design " T - 72 " the cheapest models in the world. if you want to contact me : email durghamidan@gmail.com. Print Settings Printer: DIY Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 200*200 Infill: 0.1 Filament: POLY poly GRAY Post-Printing https://youtu.be/VDPr2KBkRLM How I Designed This
Topics: RC toys, wargames, diy, battle games, RC_Car, RC vehicles, thingiverse, battletech, Games, RC tank,...
3
3.0
Jun 11, 2021
06/21
by
(DW1988)
data
eye 3
favorite 0
comment 0
Summary Mocal Oil Cooler for RC Cars Hi everyone! Here is my Oil Cooler (Mocal Style) for 1/10 Cars or Dioramas Update: 08.11.2019 First Upload I would appreciate it, if you post a "made" one :) My other 1/10 Parts BatteryTurbo and Airfilter CombinationBride Style Racing SeatK&N Air FilterSparco Racing WheelIntercoolerOil Cooler How to support me If you want to throw a little support my way please follow the Amazon links to the things I use. Filament:https://amzn.to/2BKxCM9...
Topics: scale_model, 110_Scale, RC_Car, diorama, thingiverse, cooler, oil, scale, tuning, oilcooler, 110,...
4
4.0
Jun 11, 2021
06/21
by
(DW1988)
data
eye 4
favorite 0
comment 0
Summary Battery 1/10 Hi guys, Here is my Battery for 1/10 Cars or Dioramas Look at my other Stuff to :) Update: 05.11.2019 First Upload I would appreciate it, if you post a "made" one :)
Topics: RC_Car, varta, diorama, thingiverse, scale, rc_car_parts, battery, tuning, 110_scale, 110,...
6
6.0
Jun 11, 2021
06/21
by
(DW1988)
data
eye 6
favorite 0
comment 0
Summary I started a new Project and want to share a few Parts with you. This is a 1/10 RC Car Intercooler with holes in the side for adding Tubes if you want to. Meassurements: 80mm x 20mm x 4mm If you print one, pleas add it as a Make. WbR Dirk
Topics: car, realistic, RC_Car, drift, Intercooler, thingiverse, cooler, scale, ladeluftkühler, lasercut,...
3
3.0
Jun 11, 2021
06/21
by
(DW1988)
data
eye 3
favorite 0
comment 0
Summary Sparco Racing Wheel 1/10 Hi guys, Here is my Sparco Racing Wheel for 1/10 Cars or Dioramas Look at my other Stuff to :) Update: 04.11.2019 First Upload I would appreciate it, if you post a "made" one :)
Topics: Steering_wheel, steering, RC_Car, drift, diorama, thingiverse, scale, Sparco, 110, rc_drift, stl
4
4.0
Jun 11, 2021
06/21
by
(DW1988)
data
eye 4
favorite 0
comment 0
Summary K&N Air Filter 1/10 Hi guys, Here is my K&N Air Filter for 1/10 Cars and/or Dioramas Look at my other Stuff to :) Update: 05.11.2019 First Upload I would appreciate it, if you post a "made" one :)
Topics: 110_Scale, air, Scale, RC_Car, drift, diorama, thingiverse, filter, airfilter, 110, stl
2
2.0
Mar 25, 2021
03/21
by
(EremaStar)
data
eye 2
favorite 0
comment 0
spur for remo hobby smax 39T
Topics: stl, remohobby, spur_gear, R/C Vehicles, thingiverse, smax, RC_Car, spur
3
3.0
Mar 25, 2021
03/21
by
(EremaStar)
data
eye 3
favorite 0
comment 0
For this https://ru.aliexpress.com/item/33060192011.html?spm=a2g0s.9042311.0.0.274233edV7q6bM
Topics: stl, R/C Vehicles, thingiverse, wheel, tire, RC_Car, rc_tires
2
2.0
Jun 6, 2021
06/21
by
(FiReStiLL)
data
eye 2
favorite 0
comment 0
Filament - PLA Iinfill - 30% Layers - 0.15mm
Topics: thingiverse, Ford F-150, Model, Tamiya, R/C Vehicles, RC_Car, Mount, stl
4
4.0
Jun 11, 2021
06/21
by
(Fowpowernl)
data
eye 4
favorite 0
comment 0
Summary Smartech Tornado Battery Cover. It was missing on a 2nd hand bought Smartech Tornado (1:6). So maybe this will help someone else too. Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: Yes Resolution: 0.2 Infill: 20-100% Filament: N/A PLA
Topics: RC_Car, Smartech, thingiverse, battery_cover, stl
2
2.0
Mar 25, 2021
03/21
by
(FunkyM)
data
eye 2
favorite 0
comment 0
Hi all Print with support. With 12mm hex. Screw it on and go.
Topics: stl, thingiverse, drift, RC_Car, Vehicles, tires
5
5.0
Jun 12, 2021
06/21
by
(Gtjoshua)
data
eye 5
favorite 0
comment 0
Summary V2 HAS ARRIVED!! (with a slightly tighter fit and wheel "cupping" feature) A thumb lever designed for one handed driving / trailing with the standard Redcat Gen8 RCR-2CE transmitter. Snaps on a as friction fit and found (at least for me) to be most comfortable pointed in the 8 o'clock position with plenty of throw to still make tight turns. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 20% Filament: Sunlu PLA Black
Topics: Redcat Gen 8, Redcat Transmitter, RC_Car, RCR-2CE, Redcat Racing, thingiverse, Redcat Gen8, Redcat...
1
1.0
Aug 22, 2021
08/21
by
(Hookah)
data
eye 1
favorite 0
comment 0
Flexible Wingmount for Team Corally models. Take measurement from Dementor 2021, should also fit to other 1/8 models. If you have tested it, please give me feedback 19. August 2021 - V2.1 Changes highlited in yellow - Removed some cutouts to make the print more easy and possible without supports. - made a correction of 3mm between the 4 holes on the front, they where to close in higth - added a sunk to the top two mount holes - wided up the distance between the top part, where the original wing...
Topics: RC_Car, R/C Vehicles, wing, spoiler, team_corally, stl, thingiverse, Dementor
3
3.0
Jun 12, 2021
06/21
by
(Hsztolin)
data
eye 3
favorite 0
comment 0
Summary You can print this in one part, or cut this to more parts in ideamaker. DESIGNED AS RC CAR BODY! Need post-printing grinding and painting. Print Settings Printer: BLV MGN CUBE Rafts: No Supports: Yes Resolution: 0,2 Infill: 50%
Topics: body, BMW, thingiverse, e60, rc car, stl
8
8.0
Apr 30, 2021
04/21
by
(Iczer)
data
eye 8
favorite 0
comment 0
I needed a mount for the RC4WD 9.5cti 1/10 Winch that would fit in the front of the Axial Wraith. Sadly, the winch seems to be a bit too large/tall to fit under the support struts. So, I made this little thing so the winch can be mounted directly onto the supports. This has the benefit of freeing up space to mount the headlamps in the front bumper. protecting them better and have them no longer in front of the servo mount. It's my first try at 3D Printing and Design, but maybe someone will find...
Topics: stl, R/C Vehicles, RC_Car, rc_rock_crawler, thingiverse, Axial_Wraith, RC4WD, Axial
3
3.0
Jun 12, 2021
06/21
by
(JAMAS)
data
eye 3
favorite 0
comment 0
Summary Hello, first, this is still "WORK IN PROGRESS". My original patent of rc rims for 1.9" tires. !!! OK first problem is type 6 and 6a. Don't print please, must be repaired !!! I have these 1.9" tires , but I hope It fits for other types or brands too:...
Topics: rims, rc_rims, wheel, rc rim, RC_Car, rcwheels, thingiverse, rc_tires, deadlock, crawler,...
4
4.0
Jun 19, 2021
06/21
by
(Kaizen35)
data
eye 4
favorite 0
comment 0
Summary This is absolutly not definitive ! Just a work in progress ! You can follow the WIP on my instagram https://www.instagram.com/kaizen_st/ If you appreciate my work, you can encourage me to post here and create others items by donating a tip per paypal to :https://www.paypal.me/Kaizen35 tippers : be the 1st tipper :)
Topics: thingiverse, k969, p939, miniz, p929, k999, new, rc car, k989, ft1, 1/24, k979, supra, ft-1,...
8
8.0
Jun 12, 2021
06/21
by
(KeegGeek)
data
eye 8
favorite 0
comment 0
Summary This is a gear 4cm x 6mm to print. Enjoy ! Print Settings Resolution: 0.20 or - Infill: 20 - 100% Notes: For more strength, please print in ABS
Topics: gear, transfert, rc_car, stl, thingiverse, gears, mecanic
6
6.0
Jun 12, 2021
06/21
by
(Lauden)
data
eye 6
favorite 0
comment 0
Summary RC Car Truck Carriage Print Settings Printer: Dagoma DiscoEasy200 Rafts: No Supports: Yes Resolution: 0.2 Infill: 33%
Topics: Axial_Scx10, RC_Car, thingiverse, scale, crawler, Axial, rc_crawler, stl
6
6.0
Jun 11, 2021
06/21
by
(Lauden)
data
eye 6
favorite 0
comment 0
Summary SCX10 Clip Mount Print Settings Printer: Dagoma DiscoEasy200 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100%
Topics: Axial_Scx10, RC_Car, thingiverse, scale, Axial, scx10, rc_crawler, stl
5
5.0
Jun 11, 2021
06/21
by
(Lauden)
data
eye 5
favorite 0
comment 0
Summary Figurine Mcfarlane - Walking Dead Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Yes Resolution: 0.2 Infill: 50%
Topics: scale_model, Axial_Scx10, Axial_Wraith, RC_Car, rock crawler, thingiverse, crawler, rc_crawler, stl
