9
9.0
Mar 12, 2021
03/21
by
Yuriy Pol (WinerS)
data
eye 9
favorite 0
comment 0
This Is Extremely Simple RC Rover with only 5 3D printed parts. No Suspension and No steering needed. It is 4 wheel drive and Skid-steer (like tank) turn. It is Extremely Fast and total power of 4 motors close to 1 HP. It is designed for 4x 5010-14 360KV RC Timer motors And APM 2.6 autopilot for Skid-steer control and autonomus drive. http://rctimer.com/product-575.html https://www.youtube.com/watch?v=F4V18ZaSH84 https://www.youtube.com/watch?v=fwF9S0d0WKs
Topics: thingiverse, RC_Car, R/C Vehicles, RC_Rover, stl, RC_cars
3
3.0
Jan 4, 2021
01/21
by
Daniel Hellstadius (HellDan)
data
eye 3
favorite 0
comment 0
HK-King Rattler spare parts, wheel and tire
Topics: R/C Vehicles, hobbyking, stl, thingiverse, RC_Car
6
6.0
Mar 17, 2021
03/21
by
Wrench Drive (WrenchToDrive)
data
eye 6
favorite 0
comment 0
Update: Modded it with a longer top because I needed a couple that could use body clips. All the originals are now broken :^( This is a body mount post for the HBX Rampage/GPToys S919. As always, use at your own risk. Wrench to drive or drive to wrench?
Topics: HBX, rampage, body_post, HBX_Rampage, RC_Car, stl, gptoys, s919, thingiverse, GPToys_S919, R/C...
6
6.0
Mar 17, 2021
03/21
by
Wrench Drive (WrenchToDrive)
data
eye 6
favorite 0
comment 0
This is a quick and dirty splash guard for the HBX Rampage or GPToys S919 RC cars. If you like winter bashing, this will help keep snow off your delicate electronics. As always, use at your own risk. Wrench to drive or drive to wrench?
Topics: HBX, splash, splash_guard, RC_Car, stl, gptoys, thingiverse, R/C Vehicles
2
2.0
Jul 22, 2021
07/21
by
Derek Stewart (Propwashfpv)
data
eye 2
favorite 0
comment 0
Made this for a large rc plane that I wanted a pan setup for the HD and fpv cam. You will need two 8x12x3.5 bearings (mini revo inner axle bearings) the servo interfaces with the large gear with a standard servo horn
Topics: gopro_session, TinkerCAD, gopro_hero, RC_Car, GoPro, gopro_hero_3, stl, GoPro_Mount, rc plane,...
5
5.0
Mar 8, 2021
03/21
by
stefzouille lokcy (lokcy)
data
eye 5
favorite 0
comment 0
°.° ;)
Topics: ADAPT 12MM, R/C Vehicles, stl, thingiverse, RC CAR
3
3.0
Mar 25, 2021
03/21
by
Severino Mastracci (yv3dprinter)
data
eye 3
favorite 0
comment 0
Radio HF 1/10 scale, ideal to complete your group of accessories in your rc crawler, can be installed in hardbody, rc trailer or as a component of your diorama.
Topics: stl, RC_scale_accessories, 1_10, R/C Vehicles, thingiverse, rc_crawler, rc_scale, MyRCCar,...
4
4.0
Mar 31, 2021
03/21
by
David DiPaola (DavidDiPaola)
data
eye 4
favorite 0
comment 0
A replacement electronics tray that allows you to move your electronics much farther forward. Especially useful if you want to use a sensored brushless motor or move the steering servo to the front. Hardware required: - 2x M3x8 machine screws - 2x M3 washers or 1x metal plate - 2x M3 nuts Installation: 1. Drill 2 3mm holes in the battery tray 37.5mm apart. 2. Use 3mm drill bit to clean printed part screw holes. 3. Screw part on to battery tray.
Topics: hg-P407, RC_Car, thingiverse, R/C Vehicles, hgp407, p407, hg_p407, stl
4
4.0
Mar 31, 2021
03/21
by
David DiPaola (DavidDiPaola)
data
eye 4
favorite 0
comment 0
A set of coil-over shock adapters for the HG P407. The STL files are set up for shocks that are 90mm eye-to-eye and 15mm in diameter. The OpenSCAD files allow you to customize these measurements for your particular setup. Hardware needed for each side: - 2x M3x12mm machine screws - 1x M3x20mm machine screw - 3x M3 hex nuts Since you're probably mounting a shock on both sides of the truck, double the above counts. Installation steps are provided in the photos.
Topics: hg-P407, RC_Car, thingiverse, R/C Vehicles, hgp407, p407, hg_p407, RC_Shocks, stl
3
3.0
Apr 5, 2021
04/21
by
G_ Factory (G_Factory)
data
eye 3
favorite 0
comment 0
Ceci est une étude de crawler de type shafty a base de HG P401 pour les éléments de transmission Tous les composants imprimable sont ici.
Topics: thingiverse, R/C Vehicles, crawler, stl, RC_Car
3
3.0
Mar 24, 2021
03/21
by
Frans Wolters (Fowpowernl)
data
eye 3
favorite 0
comment 0
HOBAO Adjustable Gasket, spare part number 88044. For steering arm shaft. Print 100% infill, (layer height o,1)
Topics: stl, R/C Vehicles, arm_shaft, thingiverse, RC_Car, Hobao
4
4.0
Mar 18, 2021
03/21
by
Frans Wolters (Fowpowernl)
data
eye 4
favorite 0
comment 0
HOBOA COLLAR FOR SHOCK TOWER, spare part number 88115.
Topics: R/C Vehicles, rc_wing, RC_Car, thingiverse, Hobao, spacer, stl
3
3.0
May 1, 2021
05/21
by
Timo Katemann (TiKa1981)
data
eye 3
favorite 0
comment 0
Felgen Ring oder Ringe für HOSIM 9125. Spende für meine Kinder über Paypal: timo.katemann@web.de
Topics: stl, ring, Felgen, RC_Car, 9125, car, thingiverse, Hosim, 3D Printing
3
3.0
Mar 15, 2021
03/21
by
Timo Katemann (TiKa1981)
data
eye 3
favorite 0
comment 0
Kotflügelverbreiterung für den 1:10 er 9125. Spende für meine Kinder über Paypal: timo.katemann@web.de
Topics: 1:10, 9125, Kotflü, gel, thingiverse, RC_Car, Hosim, CAR, R/C Vehicles, Verbreiterung, stl
3
3.0
Jan 4, 2021
01/21
by
RsX RsX (RsX)
data
eye 3
favorite 0
comment 0
I removed the original connector and soldered the wires directly onto the PCB. This is a nice cover to close the big connector hole and pass through the cables.
Topics: power_supply_cover, DPS600, stl, DPS_600, DPS_600PB, power_supply, hp_dps_600, thingiverse,...
9
9.0
Jun 10, 2021
06/21
by
Kent Asplund (KentAsplund)
data
eye 9
favorite 0
comment 0
New generation of the HPD! == "To finish first, first you have to finish". One big problem with a 3D printed car is durability so the most important changes made have been with the aim to increase this. This has made that the weight of the car (mine is 1130g) is now above minimum weight (1050g). The added weight is not optimal but also not only bad as it is easier to get suspension to work well on a heavier car and acceleration is depending on good traction. More improvements: * More...
Topics: car, RC_Car, thingiverse, Radio_Control, Competition, HPD_F1, R/C Vehicles, stl
2
2.0
Nov 30, 2021
11/21
by
(fwdesign)
data
eye 2
favorite 0
comment 0
Here is the 77 tooth spur gear for the HPI Blitz and other vehicles using this slipper configuration. For best results print with a support density of 25% and a fine resolution + higher infill.
Topics: spur gear, HPI, thingiverse, RC_Car, stl, R/C Vehicles
2
2.0
Nov 30, 2021
11/21
by
(fwdesign)
data
eye 2
favorite 0
comment 0
Here is the 83 teeth spur gear for the HPI BLitz and other vehicles using this slipper setup. For best restults print at higher infill and support.
Topics: HPI, thingiverse, RC_Car, stl, R/C Vehicles
2
2.0
Dec 14, 2021
12/21
by
Teknik Atölye (TeknikAtolye)
data
eye 2
favorite 0
comment 0
I made this design for my lost battery cover :) It is fully compatible with Baja 5b. My print was a little bad, don't mind it.
Topics: battery_cover, RC_Car, HPI, stl, thingiverse, R/C Vehicles, baja5b, battery
6
6.0
Apr 12, 2021
04/21
by
Chris Wingrove (saltyr1)
data
eye 6
favorite 0
comment 0
This is for the stock speed controller on the HPI Bullet ST radio controlled car. I built this to protect the fan on top of the speed control from getting smashed. Update 9/2/2016 - Created a heavy duty version.
Topics: thingiverse, crash_cage, rc_car, bullet, HPI, speed_controller, stl, fan_protector, R/C Vehicles
9
9.0
Apr 20, 2021
04/21
by
Logan m (racingsim86)
data
eye 9
favorite 0
comment 0
This is a Spur Gear for the Hpi E10 drift car/road car. I made this with the intentions of being able to drive my e10 that i have my 3d printed Scion FRS/ Toyota GT 86 body on. Just to put it around at car shows as it matches my real car. I printed mine in PLA and it will drive the car around under very light power but will strip almost immediately after giving it any torque. it would also get hot and melt i'm sure with any speed as well. Im sure you could use a better material but the e10 is...
Topics: Drift, thingiverse, HPI E10 Spur Gear, stl, R/C Vehicles, HPI, Gear, Remote Control, Spur Gear, RC...
5
5.0
Mar 18, 2021
03/21
by
Erik (titanen)
data
eye 5
favorite 0
comment 0
same size and all but made for HPI filter
Topics: RC_Car, stl, HPI, thingiverse, R/C Vehicles, 1/5
3
3.0
Jan 6, 2021
01/21
by
Ryan White (rdw5e3)
data
eye 3
favorite 0
comment 0
Since wheels for the micro RS4 seem to be discontinued, I created some basic wheels that fit the HPI D Compound soft rubber tires. There is a center block support so that the tire foam stickers do not need to be used. Printed on Prusa Mini I printed with supports but if you're comfortable with overhangs it might work without
Topics: Radio_Control, R/C Vehicles, stl, rs4, HPI, HPI Micro RS4, micro rs4, thingiverse, RC_Car
5
5.0
Jan 6, 2021
01/21
by
Ryan White (rdw5e3)
data
eye 5
favorite 0
comment 0
HPI Micro RS4 wheels designed for D-Compound rubber that also might not be in production anymore. Printed on Prusa Mini. I printed with supports but it might not need it.
Topics: Micro RS4, R/C Vehicles, stl, HPI Micro, 1/18 Scale, RS4, RC Car Wheels, HPI, HPI Micro RS4,...
4
4.0
Apr 1, 2021
04/21
by
deagon ___ (deagon)
data
eye 4
favorite 0
comment 0
Replacement Throttle Linkage for a HPI RS4s Nitro Star G3.0 engine. I recommend printing this edge down with supports as shown to avoid layer lines going horizontally across the neck of the part. **WARNING** PLA might not survive the heat of the engine, ~~but since it's all i have right now, i'll try it anyway and let you know.~~ **EDITS** 09/04/20 PLA has worked fine for me for the last 2 months.
Topics: RC_Car, thingiverse, rs4, R/C Vehicles, HPI, stl
3
3.0
Apr 4, 2021
04/21
by
calvin damsted (calvind99)
data
eye 3
favorite 0
comment 0
brace and doodads for attaching and spacing, included the fusion file so you can mill it if yu want
Topics: thingiverse, R/C Vehicles, rs4mt, stl, HPI, RC_Car
5
5.0
Mar 5, 2021
03/21
by
Jeroen Schiks (Schiksie)
data
eye 5
favorite 0
comment 0
The button on my HPI Roto start burned out on a flooded engine :-) I tried replacing it with several different buttons but they all burned out also after a few starts. Picture 1 to 3....all failed. Fujisoku APE-1F >> burned Radiohm ST1034E >> burned Buttons i tried vary from 24 v to 120v at 1 to 3 amp but they all fried. So that i went for some more drastic buttons. 12mm rond 250V/1A >> lasted about 2 months 16mm round 250V/3A So my advice is use the last one (16mm)...
Topics: roto start, stl, R/C Vehicles, HPI, hpi roto start, rc car, nitro car, thingiverse
7
7.0
Jan 20, 2021
01/21
by
Michael Lawlor (Quick5pnt0)
data
eye 7
favorite 0
comment 0
Brought to you by http://rcnewz.com This is a 3D printable replacement bumper clip for the HPI Savage RC monster truck. These clips are usually only available with the truck's bumper/shock/body mount kit which goes for about $20. Now you can print as many as you'd like for pennies a piece! If you print these parts please post pictures of them on your Savage. I'd love to see them!
Topics: clip, savage 4.6, rc truck, thingiverse, 85234, rc car, savage x, R/C Vehicles, HPI, savage xl, hpi...
8
8.0
Jan 17, 2021
01/21
by
ReePlay ReePlay (ReePlay)
data
eye 8
favorite 0
comment 0
for hpi trophy 4.6
Topics: thingiverse, spoiler, HPI, 3D Printing, stl, RC_Car
4
4.0
Apr 4, 2021
04/21
by
Dmitry Sazonov (dkstr)
data
eye 4
favorite 0
comment 0
Arm for HPI TF-41 controller
Topics: thingiverse, R/C Vehicles, controller, stl, HPI, RC_Car
11
11
Jan 13, 2021
01/21
by
ReePlay ReePlay (ReePlay)
data
eye 11
favorite 0
comment 0
HPI Trophy 4.6 Akku Box 18650x4 for more Power
Topics: akku, HPI, thingiverse, box, 18650, stl, Tool Holders & Boxes, RC_Car, 1 : 8, nitro, car,...
4
4.0
Mar 5, 2021
03/21
by
Jeroen Schiks (Schiksie)
data
eye 4
favorite 0
comment 0
I recently found this item made by alexandridk https://www.thingiverse.com/thing:2843902 and decided to also make some bumpers for it. I made 5 different bumpers. The round one can also be printed in parts and after that just glue together with superglue.This way the use off supports on that file is minmal and supports tend to leave a not so nice surface when printing TPU. That is also the one i have on my car now (see pictures). Print these with TPU ( flex ). Files : Square bumper bend :...
Topics: stl, R/C Vehicles, rc_buggy, HPI, Hpi truggy, Front_Bumper, rc bumper, HPI Trophy truggy, HPI...
7
7.0
Apr 17, 2021
04/21
by
Alexandr IDK (alexandridk)
data
eye 7
favorite 0
comment 0
https://www.youtube.com/watch?v=q1DtarSJld8
Topics: Rear Bumper, Bumper brace, RC_Car, thingiverse, HPI, stl, R/C Vehicles, HPI_Trophy_Truggy, Flux,...
3
3.0
Jun 11, 2021
06/21
by
WILLIAM TAN (WILL-I-AM)
data
eye 3
favorite 0
comment 0
Reinforcements added to make the parts tougher. May need to enlarge the holes after printing. PETG and PLA+ are fine and durable. I just used supports in the area for the body post. Inspired by HumboldtEF's https://www.thingiverse.com/thing:3608348/files
Topics: RC_Crawlers, hpi_venture, rc_crawling, RC_truck, Remote_control, RC_Trucks, RC_Car,...
7
7.0
Jan 19, 2021
01/21
by
MR VAXXi (vaxxi)
data
eye 7
favorite 0
comment 0
Rear axle hub carrier for HPI Maverick Strada MT (2017 edition, MV12623), original part number MV22009. Also compatible with: Redcat Volcano EPX Pro, HSP Brontosaurus, Exceed Infinitive, Himoto EMXT-1, Amewi Torche Pro (which are basically the same car). The model is done based on the equivalent aluminum part, which you can find for a few dollars on chinese sites and is probably much stronger than the printed part :-) however, in case you don't want to wait for shipping, this should be a good...
Topics: hsp_brontosaurus, RC_cars, thingiverse, RC_car_repair, Toys & Games, maverick_strada_mt, stl,...
7
7.0
Jan 19, 2021
01/21
by
MR VAXXi (vaxxi)
data
eye 7
favorite 0
comment 0
Body mount post for HPI Maverick Strada MT (2017 edition, MV12623), original part number MV22121 - Body Mount Post. Also compatible with: Redcat Volcano EPX Pro, HSP Brontosaurus, Exceed Infinitive, Himoto EMXT-1, Amewi Torche Pro (which are basically the same car). Parametric design: POST_DIAMETER_LOWER = diameter of base cylinder; POST_DIAMETER_UPPER = diameter of top cylinder; POST_HEIGHT_TOTAL = total height of post; POST_HEIGHT_LOWER = total height of base cylinder; BASE_WIDTH = width of...
Topics: hsp_brontosaurus, RC_cars, thingiverse, RC_car_repair, Toys & Games, maverick_strada_mt, stl,...
6
6.0
Apr 20, 2021
04/21
by
Ryan Jobse (Pesle)
data
eye 6
favorite 0
comment 0
Upgraded Rear shock tower. Was designed for a HSP Mongoose, but SHOULD fit the Crusher, Storm and Viper 2WD cars as well. Much needed upgrade from the original flimsy shock tower. All of the holes line up, but i have found that the motor wires should not go through the center, but rather zip tied to the center off to the side for the brushed models as the cables don't quite reach (brushless cables are off to the side from factory) NOTE: I have not tested the thinner shock tower, but it should...
Topics: thingiverse, HSP, stl, RC_Car, R/C Vehicles, crusher, storm, mongoose, Shock_Tower, viper, 2wd,...
9
9.0
Apr 23, 2021
04/21
by
R M (FDMBot)
data
eye 9
favorite 0
comment 0
Update 2016-07-02 Having fun with Truggy and RunCamHD on 3S. https://youtu.be/lzIVX7pFbnc Update 2016-04-27 i draw and printed parts which i broke. Will see how the holds up in outdoor test. Any way it's better then just wait for replacement parts. Also added pictures with wheel in place. http://www.thingiverse.com/thing:1522778 I want to mount an FPV Gear and camera + some LEDs on my Truggy. But didn't know where to do it. And then i saw Traxxas E-Revo roll cage. So i thought it will be a good...
Topics: 1/10, Truggy, RC CAR, LED mount, Tribeshead, stl, R/C Vehicles, thingiverse, Roll Cage, HSP
2
2.0
Dec 1, 2021
12/21
by
Fernando Gonzalez (Anibal300)
data
eye 2
favorite 0
comment 0
This is a piece to hold different kinds of batery sizes of remote controller car model HSP XSTR.One time you assemble the piece with the batery, you just have to put 2 clips, each one in their respective side
Topics: rc_car_parts, thingiverse, RC_Car, stl, 3D Printer Parts
4
4.0
Jun 11, 2021
06/21
by
Per Olset (olz90)
data
eye 4
favorite 0
comment 0
This is a replacement for the front and rear bumper on the HSP brontosaurus 94111 and similar chassis. While the front bumper can easily be removed, the rear bumper is dual purpose (both bumper and rear suspension arm bracket). The rear bracket is needed to rid yourself of the unneccessary rear bumper without weakening the rear assembly. Depending on your printer accuracy, you may need to drill the two holes where the suspension arm rod is inserted, it need to be 3mm.
Topics: brontosaurus, hsp_brontosaurus, 94111, hsp94111, HSP, RC_Car, thingiverse, 94170, R/C Vehicles,...
4
4.0
Mar 16, 2021
03/21
by
Nicholas Caro (blackriver35)
data
eye 4
favorite 0
comment 0
This is a direct replacement for the HT1 spur / pinion gear system. After breaking my original gears very quick I decided to make my own "Belt Driven" conversion for it. I used a quarter sized rubber band as well as the factory hardware. After printing, no sanding was required but I did use the tools that came with the HT1 to thread the gearshaft and reem the hole out for the motor shaft. If you have any questions, just ask.
Topics: rc_drift, thingiverse, RCDRIFT, RC_Car, open_z, HT1, openz, stl, Toys & Games, drift
5
5.0
Mar 16, 2021
03/21
by
Nicholas Caro (blackriver35)
data
eye 5
favorite 0
comment 0
This is a direct conversion for the HT1 to use Mini Z awd dogbones rather than the thin and fragile HT1 driveshafts. This is a direct fit but will require two of the mini z short swingshafts: https://www.kenonhobby.com/Kyosho-MA010-SWING-SHAFT-JOINT-AWD1PCS_p_41394.html These will directly fit into the rear axles and replace the original plastic ones making them much stronger. If you have any questions feel free to ask.
Topics: rc_drift, thingiverse, miniz, RCDRIFT, rccar, RC_Car, Mechanical Toys, HT1, openz, stl, rcdrifting,...
4
4.0
Jan 8, 2021
01/21
by
DARA Robot (willy1067)
data
eye 4
favorite 0
comment 0
I needed a model for this servo, so here you can have it as well. Included the files for 123Design, in case you want to modify it.
Topics: robotics, Servo_Mount, stl, inmoov, DARA_robot, robot, servo, InMoov_Modifications, robots,...
13
13
Mar 10, 2021
03/21
by
Sgabo Lab (SgaboLab)
data
eye 13
favorite 0
comment 0
Hi, this is a conversion of old battery drill and use it for my DIY RC Truggy. In this video you can see the project and build https://youtu.be/aUOgSwGOENQ and here you can see first test on RC Truggy https://youtu.be/dGx1r_vPrkE -- Photo of printing and other things on youtube in Community-Tab, my new instagram ;) https://www.youtube.com/user/SgaboLab/community Blogger with some diy guide http://www.sgabolab.com/ Pinshape Shop https://pinshape.com/users/130632-sgabolab If you think to buy from...
Topics: motor, 3d_printer, SgaboLab, stl, thingiverse, 3D Printing, 3D_printing, 3dprinting, 3dprintable,...
6
6.0
Mar 4, 2021
03/21
by
Peter Cunek (HynXXXX)
data
eye 6
favorite 0
comment 0
Handle for 1:10 and 1:12 scale RC crawlers. Fixed with two M2x4 screw (also can be glued). It is designed for RGT Rock Cruiser (1:12) and RGT EX86100 (1:10). Compatible with ECX Barrage or FTX Outback. Printed with 0.4mm nozzle, 0.2 layer height and supports is ON. Strictly for personal and private use, not licenced for commercial use or reproduction or in connection with any business.
Topics: stl, R/C Vehicles, scx10, 1/10, handle, RC_Car, crawler, rc_crawler, thingiverse
7
7.0
Jan 21, 2021
01/21
by
RC GANG (KZR)
data
eye 7
favorite 0
comment 0
Hard top pour lj70
Topics: scale_model, 4x4, hard_top, scale, toyota, crawler, bodyshell, thingiverse, hillux, off_road,...
9
9.0
Apr 23, 2021
04/21
by
M Bohner (Micha84)
data
eye 9
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/jvlvz5EaeZ0
Topics: HARM, thingiverse, stl, R/C Vehicles, RC_CAR
6
6.0
Mar 25, 2021
03/21
by
Marius Taciuc (taciucmarius)
data
eye 6
favorite 0
comment 0
Done uploading. For a long time now I wanted to start from scratch and build myself a 3D printed plane. So here I am almost 80h of design and printing work later, I am able to test my first flying prototype. Thingiverse exclusive? Yes, why not. This project is being mentioned on other websites for the reference but the stl files were only uploaded here. General info - Wingspan: ~820mm - Length: ~600mm cowl edge to rudder edge (these dimensions depend on how you glue the plane together,...
Topics: stl, how_to_build_a_plane, airplane, R/C Vehicles, WW2, DIY_plane, thingiverse, dog_fight, WWII,...
6
6.0
Apr 20, 2021
04/21
by
Nuno Santos (MrData)
data
eye 6
favorite 0
comment 0
Added the headlights (can work as stop lights too on the back) to the DIY RC Street Racing Car
Topics: thingiverse, stl, RC_Car, R/C Vehicles, diy, arduino, Headlights, Head Lights, Street, Racing
4
4.0
Mar 5, 2021
03/21
by
Franklin Nichols (redneckfgf)
data
eye 4
favorite 0
comment 0
I made a headache rack enjoy, if print please only charge for what you use...I used the Catalac Hinge from https://www.thingiverse.com/thing:1698951...YamFz did a great Job, why try to reinvent the wheel , and would like to thank him for the hard work....
Topics: 3D Printing, Tamiya_Trucks, stl, RC_Car, RC_truck, tamiya, thingiverse
