7
7.0
Jan 20, 2021
01/21
by
Justin Goodson (Goodsons_Hobbies)
data
eye 7
favorite 0
comment 0
I designed this to be a fairly simple plate steel look, high clearance bumper. I originally designed it for the Redcat Everest Gen7, because I disliked the stock bumper and how low it hung. Print flat back face down. 170 = 170mm wide (pictured) 190 = 190mm wide This bumper is designed to be used with my custom mounts to bolt onto the Everest Gen7 or Axial SCX10, I can provide mounting for other vehicles if someone can provide some frame dimensions. Use 2x M3 10-12mm screws. A drawing with...
Topics: RCCrawler, RedcatRacing, thingiverse, Everest_Gen7, RC_Car, R/C Vehicles, SCX10, stl, Axial
6
6.0
Jan 20, 2021
01/21
by
Justin Goodson (Goodsons_Hobbies)
data
eye 6
favorite 0
comment 0
I designed this to be a fairly simple plate steel look, high clearance bumper. This bumper is designed to be used with my custom mounts to bolt onto the Everest Gen7 or Axial SCX10, I can provide mounting for other vehicles if someone can provide some frame dimensions. Use 2x M3 10-12mm screws when mounting the bumper to the bumper mount. Print the flat back face down. 120 = 120mm wide 180 = 180mm wide 200 = 200mm wide (pictured) A drawing with minimal dimensions is provided if you choose to...
Topics: rccrawler, redcatracing, thingiverse, Everest_Gen7, R/C Vehicles, rc_car, axial, stl, scx10
4
4.0
Mar 5, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
2-Piece 1:10 RC Rim Design by SlantedRC I've designed this as a two-piece wheel. The idea behind the design, is to use the same Barrel (inner-barrel and outer-barrel is one-piece) with different disc designs. This will enable you to use the same set of tires with multiple wheel designs, and also save you a ton of time and filament as you would only have to print the barrels once and each disc design separately. Small screws to be used to fix the disc to the barrel. Since I have not printed one...
Topics: 1-10_RC, rc_racing_car, stl, RC_wheels, RC_Car, R/C Vehicles, custom_rc_wheel, rc_drift,...
4
4.0
Mar 8, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
I've designed this as a two-piece frame and plate separately. The idea behind the design, is to allow you to customize a number plate and slide it into the frame. The plate provided is a dummy, but you're more than welcome to print it out and show it off - It'd be a great honor to have our name shown off on your build. The dimensions used should fit nicely on most models. A square design will be added shortly. Small screws to be used to fix the frame to the base, or it can simply be super-glued...
Topics: RC_accesories, rc_drift, R/C Vehicles, stl, thingiverse, RC_Parts, RC_Car, RC_accessories
5
5.0
Mar 5, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 5
favorite 0
comment 0
This funnel was designed to be screwed onto your ESC fan to improve airflow and thereby aid in the cooling of the heatsink. Keep in mind that the dimensions of the base of this funnel is 30x30mm and the screw holes are exactly 24mm apart. Do not install on your ESC if the funnel is too small, you will risk restricting airflow and damaging your electronic components. Product is yet to be printed, tested and reviewed, and potential flaws on drawings may still need to repaired. I rely on your...
Topics: rc_car_parts, stl, R/C Vehicles, rc_drift, RC_cars, thingiverse
4
4.0
Apr 5, 2021
04/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
3x Variations of my RC Drift Tire Design Revised to fit Revised version rims. Simple design with 3x different grip options. Zero Grip Medium Grip Maximum Grip I would recommend trying Zero Grip on your surface first and moving up to the Maximum Grip as per your specific requirements. I am not up to date on the track / competition rules, so cannot guarantee that these tires will be allowed at your local track or event you're attending. The compound used to print the tires will also affect its...
Topics: thingiverse, R/C Vehicles, rc_drift_wheels, stl, RC_Car
4
4.0
Mar 8, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
3x Variations of my RC Drift Tire Design Simple design with 3x different grip options. Zero Grip Medium Grip Maximum Grip I would recommend trying Zero Grip on your surface first and moving up to the Maximum Grip as per your specific requirements. I am not up to date on the track / competition rules, so cannot guarantee that these tires will be allowed at your local track or event you're attending. The compound used to print the tires will also affect its manoeuverability and traction. Keep in...
Topics: RC_wheels, RC_Drift, R/C Vehicles, stl, thingiverse, RC_Car, SlantedRC
4
4.0
Mar 5, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
A more realistic version of the throttle bodies based on the parts installed in the 1969 Ford Mustang RTR driven by Vaughn Gittin Jr. and in the HPI scale version shell. I recommend trimming a hole in the bonnet area and either glueing the part to the inside of the bonnet with lexan-compatible epoxy, or with 1-2mm thick double-sided tape. Personally would recommend using tape instead of glue to avoid damaging the paint, and the small gap between the throttle bodies and the body might just add...
Topics: stl, R/C Vehicles, RC_Car, rc_drifting, rc_drift, thingiverse
4
4.0
Mar 8, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
I've designed this as a two-piece base and hook assembly. The idea behind the design, is to allow you to install the base to the inside of your shell using glue and line it up without destroying a large section of your shell. A 7mm dia hole is required for the hook to slide through. Install, allign and glue the base using epoxy glue and install, line up and secure the hook using either a small screw to split the "splines", or epoxy, or superglue. The dimensions used should fit nicely...
Topics: RC_accesories, rc_drift, R/C Vehicles, stl, thingiverse, RC_Parts, RC_Car
4
4.0
Mar 8, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
Wheel Design #1 Design by SlantedRC Wheel Design #1 provided as a solid STL. Drift tires recommended to be used with these wheels can be found here: https://www.thingiverse.com/thing:3580781 Product is yet to be printed, tested and reviewed, and potential flaws on drawings may still need to repaired. I rely on your feedback to fix any issues with any of my designs, and appreciate any and every comment you can provide - THANK YOU IN ADVANCE. Should you have a custom request, please get in touch....
Topics: rc_drift, RC_wheels, R/C Vehicles, stl, thingiverse, rc_drift_wheels, RC_Car, SlantedRC
4
4.0
Mar 8, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
Wheel Design #2 Design by SlantedRC Wheel Design #2 provided as a solid STL. Drift tires recommended to be used with these wheels can be found here: https://www.thingiverse.com/thing:3580781 Product is yet to be printed, tested and reviewed, and potential flaws on drawings may still need to repaired. I rely on your feedback to fix any issues with any of my designs, and appreciate any and every comment you can provide - THANK YOU IN ADVANCE. Should you have a custom request, please get in touch....
Topics: rc_drift, RC_wheels, R/C Vehicles, stl, thingiverse, rc_drift_wheels, RC_Car, SlantedRC
4
4.0
Mar 8, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
Wheel Design #3 Design by SlantedRC Wheel Design #3 provided as a solid STL. Drift tires recommended to be used with these wheels can be found here: https://www.thingiverse.com/thing:3580781 Product is yet to be printed, tested and reviewed, and potential flaws on drawings may still need to repaired. I rely on your feedback to fix any issues with any of my designs, and appreciate any and every comment you can provide - THANK YOU IN ADVANCE. Should you have a custom request, please get in touch....
Topics: rc_drift, RC_wheels, R/C Vehicles, stl, thingiverse, rc_drift_wheels, RC_Car, SlantedRC
4
4.0
Mar 8, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
Wheel Design #4 Design by SlantedRC Wheel Design #4 provided as a solid STL. Drift tires recommended to be used with these wheels can be found here: https://www.thingiverse.com/thing:3580781 Product is yet to be printed, tested and reviewed, and potential flaws on drawings may still need to repaired. I rely on your feedback to fix any issues with any of my designs, and appreciate any and every comment you can provide - THANK YOU IN ADVANCE. Should you have a custom request, please get in touch....
Topics: rc_drift, RC_wheels, R/C Vehicles, stl, thingiverse, rc_drift_wheels, RC_Car, SlantedRC
4
4.0
Mar 8, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
Wheel Design #5 Design by SlantedRC Wheel Design #5 provided as a solid STL. Drift tires recommended to be used with these wheels can be found here: https://www.thingiverse.com/thing:3580781 Product is yet to be printed, tested and reviewed, and potential flaws on drawings may still need to repaired. I rely on your feedback to fix any issues with any of my designs, and appreciate any and every comment you can provide - THANK YOU IN ADVANCE. Should you have a custom request, please get in touch....
Topics: rc_drift, RC_wheels, R/C Vehicles, stl, thingiverse, rc_drift_wheels, RC_Car, SlantedRC
4
4.0
Mar 8, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
Wheel Design #6 Design by SlantedRC Wheel Design #6 provided as a solid STL. Drift tires recommended to be used with these wheels can be found here: https://www.thingiverse.com/thing:3580781 Product is yet to be printed, tested and reviewed, and potential flaws on drawings may still need to repaired. I rely on your feedback to fix any issues with any of my designs, and appreciate any and every comment you can provide - THANK YOU IN ADVANCE. Should you have a custom request, please get in touch....
Topics: rc_drift, RC_wheels, R/C Vehicles, stl, thingiverse, rc_drift_wheels, RC_Car, SlantedRC
3
3.0
Apr 2, 2021
04/21
by
Neil Norton (nnorton00)
data
eye 3
favorite 0
comment 0
I picked up these 1.55" wheels and tires from Amazon for 5 Euro and fell in love with look, but I wanted beadlock wheels instead of gluing the tires. I searched around and couldn't find any 1.55" wheels with a 5mm hex so I decided to take a stab at designing my own. 6 M3 nuts screw into the backside, the length depends on which version you use. 3 designs, the main design of each uses a flat head screw in the center, alternate designs of each allow for a SHCS. Amazon non affiliate link...
Topics: beadlock, RC_wheels, 5mm, rc_crawler, RC_Car, thingiverse, R/C Vehicles, WPL_Crawler, WPL, stl
4
4.0
Mar 25, 2021
03/21
by
dominic michel (domi1974)
data
eye 4
favorite 0
comment 0
For my Suzuki Sierra Jimny 2018 I made some rims to fit MST tires. The rims fit MST KM 90x30mm tires. As you can see it fits the car very nicely. Here you can find the Body: https://www.thingiverse.com/thing:3643268 If you want to mount other tires write me so that we can adjust the rims to your tires.
Topics: stl, R/C Vehicles, Jimny Sierra, thingiverse, 1.9, Felge, rc_felge, Rim, suzuki_Jimny, RC_Car, 2018
9
9.0
Jan 17, 2021
01/21
by
Denis Davydov (ivnssnn)
data
eye 9
favorite 0
comment 0
Buggy with fully printed chassis If anyone is interested, I will make a full specification and I will make an assembly instruction. At the moment in the development of the body case List of required details: CVD ----------------------------------- 4 https://goo.gl/5WA1hL Rear shock absorbers------------- 2 https://goo.gl/pmiiAj Front shock absorber-------------- 2 https://goo.gl/UvwLSf Wheels -------------------------------- 4 https://goo.gl/AUevML Combo 3650 motor and ESC --- 1...
Topics: RC4WD, brushless, Buggy, 4wd, 1/10, metall gear, RC_cars, 3650, thingiverse, CVD, 4WD buggy,...
7
7.0
Jan 19, 2021
01/21
by
Denis Davydov (ivnssnn)
data
eye 7
favorite 0
comment 0
When I did 1/10 RC 4WD The Buggy RB250 realized that the parts from the HSP break before the plastic =). Therefore, I decided to use 1/8 scale parts. That's what it turned out =) ##### List of non-printing parts (without screws) | Name | Pieces | Link | | ------------- |:-------------:| -----:| |1. Mr148rs| 10pcs | https://goo.gl/fsduVA| |2. 6882RS| 10pcs | https://goo.gl/j83p1H| |3. Dogbones 86 мм |4pcs | https://goo.gl/WVXAdq| |4. Cups| 4pcs | https://goo.gl/NSyBJS| |5. Hex 17mm| 4pcs |...
Topics: RC4WD, brushless, 4wd, 3650, thingiverse, 1/10, car, scale_RC_cars, Truggy, RC_Car, R/C Vehicles,...
3
3.0
Apr 27, 2021
04/21
by
Manuel Pöhlmann (ChainZ186)
data
eye 3
favorite 0
comment 0
I made this "Ball Head" for my Ansmann Macnum 1/10 RC Car. you can use it for any fitting RC Car, but i used it to fix my broken Ball head on my steering rack. Printed at 0.12mm on an Ender 3 at 30mm/s Travel Time with an Generic PLA. Measurements: Inner ball diameter: 4,90mm Outer ball diameter: 7,5mm Full length: 21,0mm Thickness of Head from the side :6mm Outer diameter of the long end 5,8mm Inner diameter from the long end 3,5mm (screw/steering stick is 3mm, hole is 3,5mm) (im...
Topics: RC_Car, thingiverse, 1/10, stl, R/C Vehicles, ansmann
2
2.0
Nov 30, 2021
11/21
by
Lars W (Printofules)
data
eye 2
favorite 0
comment 0
Mount your 1/10 bodys to the wall. For 6mm Tamiya bores (72mm width).
Topics: chassis, rc car, scale, thingiverse, wallmount, 1:10, stl, tamiya, R/C Vehicles, hpi
2
2.0
Apr 19, 2022
04/22
by
Thomas Sevcik (EdgeOfTheRazor)
data
eye 2
favorite 0
comment 0
1/10 size wheel for touring style rc cars, 12mm hex
Topics: thingiverse, hot wheels, wheels, RC_Car, wheel, cm6, car, stl, R/C Vehicles, acceleracers
8
8.0
Mar 2, 2021
03/21
by
Ryan G. (Fat_Pug_Creations)
data
eye 8
favorite 0
comment 0
A drift tire wheel I made in Fusion 360. Fits 1/10 RC cars with a hexagonal piece on the axle. Youtube: https://www.youtube.com/channel/UC4CR8YfE9R3f787X7P1D-5Q Want to support me/my Youtube channel and make money?(requires signing up) -Spend $25, you get $10 and I get $25: https://www.ebates.com/r/RJGILB11?eeid=28187 -Buy something and I get $5: joinhoney.com/ref/e1j5di -I get 10% of your Swagbuck earnings: http://www.swagbucks.com/refer/Pug21
Topics: rim, thingiverse, stl, rc_drift_wheels, 1/10, wheel, rc_drift, tire, R/C Vehicles, 1/10 RC, Drift,...
7
7.0
Mar 2, 2021
03/21
by
Ryan G. (Fat_Pug_Creations)
data
eye 7
favorite 0
comment 0
My second version of a 1/10 scale RC car drift tire/wheel. My first wheel: https://www.thingiverse.com/thing:3109848 Youtube: https://www.youtube.com/channel/UC4CR8YfE9R3f787X7P1D-5Q Want to support me/my Youtube channel and make money?(requires signing up) -Spend $25, you get $10 and I get $25: https://www.ebates.com/r/RJGILB11?eeid=28187 -Buy something and I get $5: joinhoney.com/ref/e1j5di -I get 10% of your Swagbuck earnings: http://www.swagbucks.com/refer/Pug21
Topics: thingiverse, stl, 1/10_rc, TinkerCAD, RC_car, 1/10, R/C Vehicles, 1/10_rc_car, 1/10_rc_car_wheel
4
4.0
Jun 11, 2021
06/21
by
Roman Lueck (pitbuild)
data
eye 4
favorite 0
comment 0
This is the v2.0 updated version of the famous RC 1/10 Trailer v1.0 (https://www.thingiverse.com/thing:4739461) This time with a rear flap to actually open and close and in two different variants: a "STD" version and a "high" version like a loading ramp. Would you like to see another rear flap version? - Let me know your ideas! Fenders are now bolted on and no linger glued in. The glued v1.0 didn't proof solid enough. Further the towing bar is now with an optimised, thicker...
Topics: EX86100, trx4, 110, scx10ii, Axial_Scx10, rc_crawling, trx, RC_Car, EX86010, trailer_hitch,...
3
3.0
Jul 25, 2021
07/21
by
jaime peñuela (billymacarra)
data
eye 3
favorite 0
comment 0
Fit 12mm hex adapter
Topics: thingiverse, R/C Vehicles, tamiya, stl, RC_Car, delorean
9
9.0
Jan 13, 2021
01/21
by
Vic Sar (vicoz2009)
data
eye 9
favorite 0
comment 0
A more scale looking design. PLA seems strong enough so made this one a bit thinner.
Topics: thingiverse, 3D Printing, stl, OpenRC, rc_car, drift, wheels, mags
7
7.0
Jan 20, 2021
01/21
by
Alexandre Brun (Baron_Lawder)
data
eye 7
favorite 0
comment 0
EN: I printed this wheel in ABS with 100% Infill, it also works in PLA but you'll get less resistance. You have to use supports to get good results. This Wheel is compatible with all 1/10 RC car with 12mm hexagon fixation. Have fun :) FR: J'ai imprimé cette roue en ABS avec 100% de remplissage, cela fonctionne aussi en PLA mais vous aurez moins de résistance. Vous devez utiliser des supports pour obtenir de bons résultats. Cette roue est compatible avec toutes les voitures RC 1/10 avec...
Topics: roue, 110, on_road, thingiverse, wheel, OpenRC, car, R/C Vehicles, voiture, stl, RC_Car, drift
9
9.0
Jan 20, 2021
01/21
by
GOKAY AKTAN (gokayaktan)
data
eye 9
favorite 0
comment 0
1/10 RC Droop Gauge Set
Topics: R/C Vehicles, stl, RC_Car, thingiverse
10
10.0
Jun 20, 2021
06/21
by
Mike Key (MikeKey)
data
eye 10
favorite 0
comment 0
A friend wanted some wheels for his RC "General Lee" build (from the "Dukes of Hazzard" TV show), so I designed some in the style of the original American Racing "Vector" wheels as there wasn't much available. There are wheels to fit both regular 26mm touring car tyres, as well as HPI/Protoform's "Vintage" style tyres for a more authentic look. The 26mm wheels come in two versions, one "regular" wheel and one with a wide lip. The one with the...
Topics: RC_Car, Dukes_of_Hazard, R/C Vehicles, wheel, thingiverse, general_Lee, stl, wheels, vector,...
7
7.0
Jan 20, 2021
01/21
by
Alexandre Brun (Baron_Lawder)
data
eye 7
favorite 0
comment 0
EN: I printed this wheel in ABS with 100% Infill, it also works in PLA but you'll get less resistance. You have to use supports to get good results. This Wheel is compatible with all 1/10 RC car with 12mm hexagon fixation. Have fun :) FR: J'ai imprimé cette roue en ABS avec 100% de remplissage, cela fonctionne aussi en PLA mais vous aurez moins de résistance. Vous devez utiliser des supports pour obtenir de bons résultats. Cette roue est compatible avec toutes les voitures RC 1/10 avec...
Topics: Racing, roue, 110, on_road, thingiverse, wheel, OpenRC, car, R/C Vehicles, voiture, stl, RC_Car
6
6.0
Jan 20, 2021
01/21
by
Alexandre Brun (Baron_Lawder)
data
eye 6
favorite 0
comment 0
EN: I printed this wheel in ABS with 100% Infill, it also works in PLA but you'll get less resistance. You have to use supports to get good results. This Wheel is compatible with all 1/10 RC car with 12mm hexagon fixation. Have fun :) FR: J'ai imprimé cette roue en ABS avec 100% de remplissage, cela fonctionne aussi en PLA mais vous aurez moins de résistance. Vous devez utiliser des supports pour obtenir de bons résultats. Cette roue est compatible avec toutes les voitures RC 1/10 avec...
Topics: roue, 110, rallye, on_road, thingiverse, wheel, OpenRC, car, rally, R/C Vehicles, voiture, stl,...
9
9.0
Jan 20, 2021
01/21
by
GOKAY AKTAN (gokayaktan)
data
eye 9
favorite 0
comment 0
1/10 RC Ride Height Gauge
Topics: thingiverse, xray, R/C Vehicles, stl, RC_Car
3
3.0
Jan 3, 2021
01/21
by
(mugi0482)
data
eye 3
favorite 0
comment 0
Simple rim for 1:10 scaled Rc cars
Topics: R/C Vehicles, stl, rc_rims, rims, thingiverse, RC_Car
10
10.0
Apr 30, 2021
04/21
by
daniel sprehe (dsprehe89)
data
eye 10
favorite 0
comment 0
This is a remix of kallaspriit's "Spiked" RC car wheel. It is designed to fit a 12mm hex, but the solidworks (2013) source file is available if you wish to make is smaller or larger for your needs. I printed my rim at 25% infill with PLA and it held up decently well. I ran the car very hard over numerous jumps for 30 minutes straight in 15 degree weather today. I lost a couple of the spikes, but I feel that is because I was running it in very thin snow. I suspect it would work much...
Topics: stl, rims, RC_Car, rc_tires, rim, thingiverse, R/C Vehicles
13
13
Mar 21, 2021
03/21
by
Otto Polefko (3DO2)
data
eye 13
favorite 0
comment 0
It's a simple dummy root type supercharger, that can make your loved toy much more outstanding. You can cut through your chassis and fix the supercharger with a support from below, (that is that I did) or simply just fix on the top of the bonnet of your RC with some kind of glue/tape/screw. . .etc. (double side tape is quite practical. I use this to prevent the damage of the chassis during fall over) My print resolution was 0.2 with slow speed. on 250 degree celsius. But I suppose the 230 would...
Topics: RC_Car, stl, scale, RC_accesories, supercharger, 1:10, dummy, 1/10 scale, R/C Vehicles,...
3
3.0
Apr 4, 2021
04/21
by
Kang Jie Chin (KayJayFE)
data
eye 3
favorite 0
comment 0
Simple 4 piece shock tray for 1/10 touring cars, tray itself is 190mm long with 4 partitions to hold your shock parts. Stand offs printed laying on the side Requires 4 fasteners - Countersunk 3x12mm
Topics: thingiverse, hudy, R/C Vehicles, tool_holder, shock, stl, organizer, RC_Car
9
9.0
Mar 19, 2021
03/21
by
David Moynihan (Eire335)
data
eye 9
favorite 0
comment 0
This is an alternate wheel for use with the OpenRC project.
Topics: R/C Vehicles, Wheel, stl, RC_Car, thingiverse, OpenRC
4
4.0
Jan 8, 2021
01/21
by
Šimon Doub (Fox98)
data
eye 4
favorite 0
comment 0
Fully printable 3D trailer for 3D sets cars with LED lights and plates. Trailer can carry more than 5kg Files can be download under this link https://cults3d.com/en/3d-model/home/1-10-car-trailer-for-rc-cars-for-3d-sets-cars
Topics: remote, LED_light, rcmodel, train_track, crawler, rc_crawler, RC_Car, RC_cars, lighting,...
3
3.0
Apr 27, 2021
04/21
by
Patrick Büttner (napado)
data
eye 3
favorite 0
comment 0
This is a display stand for 1/10 RC bodies. The component "1zu10 display type 3" has to be printed twice, the parts "Karo Halter kurz" and "Karo Halter" each twice. the whole is then connected with M4 screws. -Dies ist ein Displayständer für 1/10 RC Karosserien. Das Bauteil "1zu10 Display typ 3" muss 2x gedruckt werden, die Teile "Karo Halter kurz" und "Karo Halter" jeweils 2 mal. das ganze wird dann mit M4 Schrauben verbunden.-
Topics: thingiverse, RC Car, 1/10, Stand, stl, R/C Vehicles, Car stand
3
3.0
Mar 19, 2021
03/21
by
Jagger Ramsey (jramsey32)
data
eye 3
favorite 0
comment 0
This might be able to be used for other model RC cars. 5mm ball cup 4-40 hole threads, will thread in by itself. Mine stays very tight and secure. Printed with the face of the hole towards the bed. I printed in PLA, but I am going to try ABS soon.
Topics: R/C Vehicles, RC_Car, thingiverse, RC10, stl
2
2.0
Aug 8, 2021
08/21
by
Mathis Röcker (Kettenstern)
data
eye 2
favorite 0
comment 0
This simple rear wing suits the FC RX7 in 1/10th scale (as long as there is no wing already molded onto the body itself). It is mounted with thin double sided tape. Nice accessory for a clean drift build ;)
Topics: fc_rx7, ducktail, tuning, rc_spoiler, thingiverse, jdm_cars, rear_spoiler, spoiler, RC_Car, jdm,...
3
3.0
Jan 3, 2021
01/21
by
(mugi0482)
data
eye 3
favorite 0
comment 0
Rim for 1:10 scaled Rc car
Topics: R/C Vehicles, stl, rc_rims, thingiverse, RC_Car
6
6.0
Apr 20, 2021
04/21
by
Fabian (Fabians223)
data
eye 6
favorite 0
comment 0
To fit 1/10 Tamiya Rx7, should fit other 1/10 scale rc shells. I printed mine at 10% infill. Takes about an hour to print.
Topics: thingiverse, drift rc, stl, R/C Vehicles, HPI, TT02, rc car, rear diffuser, drift, diffuser, 1/10
6
6.0
Jun 21, 2021
06/21
by
Calvin Reed (Kanglin32)
data
eye 6
favorite 0
comment 0
This is a rim for an true 4 wheel drive RC car. it is not hex or pin drive. it requires a 2204 brush-less motor in each wheel. I am using 2300KV motors, they are all I had available at the moment. I personally would use some stronger ones but I don't know how strong these ones are yet.
Topics: RC_Car, rc car wheel, fast, wheel, thingiverse, brushless, stl, 3D Printing, brushless motor,...
4
4.0
Mar 15, 2021
03/21
by
Bento Bento (bento_27)
data
eye 4
favorite 0
comment 0
1/10 rc rim wheel design 3 parts.
Topics: thingiverse, rims, RC_Car, R/C Vehicles, 1_10_scale, stl
5
5.0
Mar 15, 2021
03/21
by
Bento Bento (bento_27)
data
eye 5
favorite 0
comment 0
1/10 rc rim wheel design.
Topics: stl, R/C Vehicles, RC_Car, thingiverse
4
4.0
May 1, 2021
05/21
by
kuku Wang (wang4576)
data
eye 4
favorite 0
comment 0
This is a body for 1/10 touring/rally car. I made it purely for practicing Solidworks. This model is not a modification from another model creator. I design the model from the blueprint of Tamiya. So don't pay too much attention to the details. ------------------------------------------------------------------------------------------- width 190mm wheelbase 260mm It is a 1 to 1 ratio model. You need to scale the model down to 1;10 No mounting holes. You need to mount the body to your chassis on...
Topics: stl, WRC, rally, 1/10, RC_Car, touring_car, thingiverse, body, 3D Printing, subaru
2
2.0
Aug 8, 2021
08/21
by
Sean Clemence (Hypergames)
data
eye 2
favorite 0
comment 0
made some leaf springs for a trailer i was making. thingiverse doesnt allow photos over a certain size so heres a link to the photos https://drive.google.com/file/d/1kAwYN6rruC5Lc34DNFKmLaSd40rBmhT9/view?usp=sharing https://drive.google.com/file/d/1ixhd7YjnoSUPxT69VxnvNii6LvBOxFUn/view?usp=sharing
Topics: leaf, thingiverse, leaf springs, rc., awesome, rc leaf springs, RC_Car, Hobby, leaf spring, rc...
3
3.0
Jun 7, 2021
06/21
by
Tom Debats (Creatom75)
data
eye 3
favorite 0
comment 0
A 1/10 scale wheel based on 195/70 R14 reel wheel. Inside is place for a bearing 22/8 mm 7 mm wide The tyre is printed in flex, the rim and wheelnut in PLA
Topics: rcscaler, RC_Car, scale wheel, rc wheel, thingiverse, 1/10, stl, R/C Vehicles
