3
3.0
Mar 25, 2021
03/21
by
Henry McCausland (MAKER_HenryMc)
data
eye 3
favorite 0
comment 0
this is an ongoing project of mine the goal is to have a functioning rc rover that uses these components: any 8 ch radio receiver compatible with curent transmiter Waterproof F540 4370KV Brushless moteur, 4 of these 3s 10 000 mAh lipo for with a calculate minimum of 6 minutes drive time 64mm 1/10 scale model truck wheels, 4 of these 4x13x5mm bearings, 4 of these 12x28x8mm bearings, 4 of these fatuba DS3218 servo moters, 4 of these 25t circular servo arm, 4 of thesee
Topics: stl, R/C Vehicles, thingiverse, robot, rover, RC_Car
6
6.0
Jan 19, 2021
01/21
by
Turo Heikkinen (tjheikki)
data
eye 6
favorite 0
comment 0
Designed for opening the RC car shock abrorber [Adjustable Piggyback Dual Springs Damper Shock Absorber](https://www.banggood.com/110-Metal-110mm-Adjustable-Piggyback-Dual-Springs-Damper-Shock-Absorber-Red-RC-Car-Usual-Accessory-p-1263316.html "Shop link") cap. To me looks like the [Xtra speed shocks](https://www.aliexpress.com/item/Xtra-Speed-90mm-100mm-110mm-Shock-Damper-Absorber-Adjustable-Piggyback-Dual-Springs-Black-1-Pair-For/32757503736.html "Shop link") with similar...
Topics: RC_car_repair, thingiverse, tools, shock_absorption, R/C Vehicles, stl, RC_Car
3
3.0
Apr 4, 2021
04/21
by
Riccardo Teodori (Thiodor93)
data
eye 3
favorite 0
comment 0
Hello everyone! I designed this shock tower, compatible with wltoys (read me file to see compatibilieties), to avoid breakages caused by overturning, or very high jumps, once the shock absorber limit is reached, another spring starts operating which absorbs the impact! you can see a video of the operation in the zip, it contains a read me file that tells you everything you need to know If you found this useful, please donate what you think it is worth to my paypal.me. Help cover the time of...
Topics: a969-b, A949, a949-09, shock absorber, a979-b, a959, a959b, shock tower, a979, thingiverse, a959-b,...
9
9.0
Apr 22, 2021
04/21
by
Benjamin Krings (Ben___)
data
eye 9
favorite 0
comment 0
I created them to have some spare parts for my "LRP S10 tc" rc car. Its for an 2mm bolt, printed flat, just warm it and give it a radius.
Topics: touring_car, rc-car, stl, Body_mount_rc, R/C Vehicles, thingiverse
7
7.0
Jan 20, 2021
01/21
by
Justin Goodson (Goodsons_Hobbies)
data
eye 7
favorite 0
comment 0
I designed this to be a fairly simple plate steel look, high clearance bumper. I originally designed it for the Redcat Everest Gen7, because I disliked the stock bumper and how low it hung. Print flat back face down. 170 = 170mm wide (pictured) 190 = 190mm wide This bumper is designed to be used with my custom mounts to bolt onto the Everest Gen7 or Axial SCX10, I can provide mounting for other vehicles if someone can provide some frame dimensions. Use 2x M3 10-12mm screws. A drawing with...
Topics: RCCrawler, RedcatRacing, thingiverse, Everest_Gen7, RC_Car, R/C Vehicles, SCX10, stl, Axial
6
6.0
Jan 20, 2021
01/21
by
Justin Goodson (Goodsons_Hobbies)
data
eye 6
favorite 0
comment 0
I designed this to be a fairly simple plate steel look, high clearance bumper. This bumper is designed to be used with my custom mounts to bolt onto the Everest Gen7 or Axial SCX10, I can provide mounting for other vehicles if someone can provide some frame dimensions. Use 2x M3 10-12mm screws when mounting the bumper to the bumper mount. Print the flat back face down. 120 = 120mm wide 180 = 180mm wide 200 = 200mm wide (pictured) A drawing with minimal dimensions is provided if you choose to...
Topics: rccrawler, redcatracing, thingiverse, Everest_Gen7, R/C Vehicles, rc_car, axial, stl, scx10
5
5.0
Jun 10, 2021
06/21
by
Ryan McGee (superrm11)
data
eye 5
favorite 0
comment 0
A robot designed with a fake swerve drive. Fake because it does not move 360 degrees, but is limited to the wire length on the wheels. It is easy on printers! It uses 4 n20 motors, and 4 stepper motors. For electronics, it has a raspberry pi zero, 4 stepper motor drivers, and 2 H-bridge circuits powering 2 DC motors each. A micro-USB charging circuit with 2 14500 li-ion batteries in parallel for power, and 2 boost circuits at 5V and 6V. Here's the code
Topics: robot, Robotics, RC_Car, thingiverse, Raspberry_Pi, stl
2
2.0
Jul 22, 2021
07/21
by
Johannes B. (OMG-3D)
data
eye 2
favorite 0
comment 0
"TOD" edition of the small pushing bot, designed for two servo motors SG90 and an ESP8266 microcontroller. The zip file includes the firmware, which can be easily loaded with the Arduino IDE. See also: https://www.thingiverse.com/thing:4888287 https://www.thingiverse.com/thing:4888304 https://www.thingiverse.com/thing:4888299 https://www.thingiverse.com/thing:4888298 https://www.thingiverse.com/thing:4888301 https://www.thingiverse.com/thing:4888296...
Topics: ESP8266, battlebot, antweight, RC_Car, Makerfaire, stl, robot, Robotics, thingiverse
9
9.0
Mar 13, 2021
03/21
by
DJ Hatfield (H5Labs)
data
eye 9
favorite 0
comment 0
This project hacks an Air Hogs Thunder Trax RC vehicle by replacing the standard remote with an accelerometer enabled gauntlet. To control the vehicle, you simply move your hand in the direction you want it to go. Master Yoda would be proud. This project was inspired by someone with a disability affecting one arm leaving them only in control of their right arm. This hack allows them to enjoy the fun of controlling an RC vehicle with just one arm. The project was implemented with education in...
Topics: the force, thingiverse, Accelerometer, STEM, RC vehicle, R/C Vehicles, RC car, Thunder Trax, stl,...
5
5.0
Jun 11, 2021
06/21
by
(DW1988)
data
eye 5
favorite 0
comment 0
Summary Battery 1/10 Hi guys, Here is my Battery for 1/10 Cars or Dioramas Look at my other Stuff to :) Update: 05.11.2019 First Upload I would appreciate it, if you post a "made" one :)
Topics: RC_Car, varta, diorama, thingiverse, scale, rc_car_parts, battery, tuning, 110_scale, 110,...
4
4.0
Mar 9, 2021
03/21
by
Hardy Johnson (Hanoverview)
data
eye 4
favorite 0
comment 0
3d Print a RC car Ever playd Rollcage ? Its that just in RC 860KV 2212 motor *4 35A 4in1 esc 61mm wheels
Topics: R/C Vehicles, stl, thingiverse, Fast, Direct drive, Violator, RC_Car
4
4.0
Jun 10, 2021
06/21
by
Brendon Tower (brendonbuilds)
data
eye 4
favorite 0
comment 0
Add some style to your #OpenRC Truggy with these custom side shields featuring the OpenRC Baseball Logo. Print in different colors or materials, or combine all the models to use with a single material. Or, if you want to get crazy: print the main body in a durable material such as Fillamentum CPE HG100, print the infill with a stiff material like Proto-Pasta CF-HTPLA, then add some color to the inlaid logo. This model was designed from the step files included with this amazing work of art:...
Topics: RC_Car, thingiverse, openrc, OpenRC_Truggy, R/C Vehicles, Truggy, stl
4
4.0
Mar 15, 2021
03/21
by
F M (opulius)
data
eye 4
favorite 0
comment 0
#Carstand for all your RC Cars in the shelf or on track to work on your car. The size is similar to other Car stands on the market ( 100 x 30 x 160 ) mm To fit to your car just change size in your slicer by factor. This Thing has a little pocket inside just tape any scrap metal parts inside to make it heavier. For a secure stand just add some foam tape on top and bottom. Have Fun https://www.thingiverse.com/opulius/designs And if you like my design please don't forget to share in instagram...
Topics: thingiverse, miniz, carstand, rccar, RCDRIFT, RCracing, RC_Car, R/C Vehicles, stl, rcdrifting,...
3
3.0
Jul 22, 2021
07/21
by
Marcello Vasile (TZstudio)
data
eye 3
favorite 0
comment 0
This is only the firt prototype so feel free to remix it if you want. I use the Caddx ant whith the rubber cover so the space for fix it in place is around 20mm. The video transmitter is an Eachine TX5258 with the stock antenna. -EDIT 1: You need to mirror the pod to have the hole for the antenna in the opposit side and moun the video transmitter with the connector up.
Topics: camera, RC_Car, camera_mount, pod, stl, fpv, R/C Vehicles, RC_plane, CADDX, fpv_camera_mount,...
7
7.0
Mar 17, 2021
03/21
by
Leander Shaffer (Leander98)
data
eye 7
favorite 0
comment 0
This is an 06 Pontiac GTO that fits LONG Chassis only. Custom Clip on the way, But fits Barricade front clip perfectly.
Topics: 2006_Pontiac_GTO, pontiac, RC_Car, shell, GTO, stl, musclecar, muscle_car, thingiverse, muscle,...
7
7.0
Mar 17, 2021
03/21
by
Leander Shaffer (Leander98)
data
eye 7
favorite 0
comment 0
This is a 09 Subaru Outback Wagon/Estate that fits LONG Chassis only on EVO and Street XMOD chassis. Custom Clip on the way, but fits perfectly on a Barricade Front Clip.
Topics: car, subaru, subaru_outback, Outback, rally, offroad, RC_Car, stl, Wagon, Estate, thingiverse,...
9
9.0
Mar 12, 2021
03/21
by
Yuriy Pol (WinerS)
data
eye 9
favorite 0
comment 0
This Is Extremely Simple RC Rover with only 5 3D printed parts. No Suspension and No steering needed. It is 4 wheel drive and Skid-steer (like tank) turn. It is Extremely Fast and total power of 4 motors close to 1 HP. It is designed for 4x 5010-14 360KV RC Timer motors And APM 2.6 autopilot for Skid-steer control and autonomus drive. http://rctimer.com/product-575.html https://www.youtube.com/watch?v=F4V18ZaSH84 https://www.youtube.com/watch?v=fwF9S0d0WKs
Topics: thingiverse, RC_Car, R/C Vehicles, RC_Rover, stl, RC_cars
3
3.0
Apr 4, 2021
04/21
by
Mark Cole (Printed_RC)
data
eye 3
favorite 0
comment 0
Simple beadlock for the SCX24 or similar truck. Printed them in silk copper for a better look. They are quite strong and haven't had any issues. You could add wheel weights to the inner ring as well. Print these with the widest section of ring all the way in the air with supports. Printed with .4mm nozzle at .2 layer height with high success. Required hardware: 5 - M2x6 screws per wheel.
Topics: thingiverse, Axial, Micro Crawler, SCX24, R/C Vehicles, stl, RC_Car
4
4.0
Apr 2, 2021
04/21
by
Michael Sivertsen (one_humanoid)
data
eye 4
favorite 0
comment 0
got inspired by a picture of an classic muscle car and made this,it is based on my hurricane wheel https://www.thingiverse.com/thing:2801950 ,just another offset. As always 12mm hex and the offset is +1 and the size is 1,9. The tire on the wheel in the pictures is a 108mm absima steelhammer(cheap china tire)
Topics: beadlock, 1.9 wheel, thingiverse, R/C Vehicles, rc car, rc car wheel, rock crawler, 12mm hex, stl
4
4.0
Mar 5, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
2-Piece 1:10 RC Rim Design by SlantedRC I've designed this as a two-piece wheel. The idea behind the design, is to use the same Barrel (inner-barrel and outer-barrel is one-piece) with different disc designs. This will enable you to use the same set of tires with multiple wheel designs, and also save you a ton of time and filament as you would only have to print the barrels once and each disc design separately. Small screws to be used to fix the disc to the barrel. Since I have not printed one...
Topics: 1-10_RC, rc_racing_car, stl, RC_wheels, RC_Car, R/C Vehicles, custom_rc_wheel, rc_drift,...
4
4.0
Mar 8, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
I've designed this as a two-piece frame and plate separately. The idea behind the design, is to allow you to customize a number plate and slide it into the frame. The plate provided is a dummy, but you're more than welcome to print it out and show it off - It'd be a great honor to have our name shown off on your build. The dimensions used should fit nicely on most models. A square design will be added shortly. Small screws to be used to fix the frame to the base, or it can simply be super-glued...
Topics: RC_accesories, rc_drift, R/C Vehicles, stl, thingiverse, RC_Parts, RC_Car, RC_accessories
5
5.0
Mar 5, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 5
favorite 0
comment 0
This funnel was designed to be screwed onto your ESC fan to improve airflow and thereby aid in the cooling of the heatsink. Keep in mind that the dimensions of the base of this funnel is 30x30mm and the screw holes are exactly 24mm apart. Do not install on your ESC if the funnel is too small, you will risk restricting airflow and damaging your electronic components. Product is yet to be printed, tested and reviewed, and potential flaws on drawings may still need to repaired. I rely on your...
Topics: rc_car_parts, stl, R/C Vehicles, rc_drift, RC_cars, thingiverse
4
4.0
Apr 5, 2021
04/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
3x Variations of my RC Drift Tire Design Revised to fit Revised version rims. Simple design with 3x different grip options. Zero Grip Medium Grip Maximum Grip I would recommend trying Zero Grip on your surface first and moving up to the Maximum Grip as per your specific requirements. I am not up to date on the track / competition rules, so cannot guarantee that these tires will be allowed at your local track or event you're attending. The compound used to print the tires will also affect its...
Topics: thingiverse, R/C Vehicles, rc_drift_wheels, stl, RC_Car
4
4.0
Mar 8, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
3x Variations of my RC Drift Tire Design Simple design with 3x different grip options. Zero Grip Medium Grip Maximum Grip I would recommend trying Zero Grip on your surface first and moving up to the Maximum Grip as per your specific requirements. I am not up to date on the track / competition rules, so cannot guarantee that these tires will be allowed at your local track or event you're attending. The compound used to print the tires will also affect its manoeuverability and traction. Keep in...
Topics: RC_wheels, RC_Drift, R/C Vehicles, stl, thingiverse, RC_Car, SlantedRC
4
4.0
Mar 5, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
A more realistic version of the throttle bodies based on the parts installed in the 1969 Ford Mustang RTR driven by Vaughn Gittin Jr. and in the HPI scale version shell. I recommend trimming a hole in the bonnet area and either glueing the part to the inside of the bonnet with lexan-compatible epoxy, or with 1-2mm thick double-sided tape. Personally would recommend using tape instead of glue to avoid damaging the paint, and the small gap between the throttle bodies and the body might just add...
Topics: stl, R/C Vehicles, RC_Car, rc_drifting, rc_drift, thingiverse
4
4.0
Mar 8, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
I've designed this as a two-piece base and hook assembly. The idea behind the design, is to allow you to install the base to the inside of your shell using glue and line it up without destroying a large section of your shell. A 7mm dia hole is required for the hook to slide through. Install, allign and glue the base using epoxy glue and install, line up and secure the hook using either a small screw to split the "splines", or epoxy, or superglue. The dimensions used should fit nicely...
Topics: RC_accesories, rc_drift, R/C Vehicles, stl, thingiverse, RC_Parts, RC_Car
4
4.0
Mar 8, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
Wheel Design #1 Design by SlantedRC Wheel Design #1 provided as a solid STL. Drift tires recommended to be used with these wheels can be found here: https://www.thingiverse.com/thing:3580781 Product is yet to be printed, tested and reviewed, and potential flaws on drawings may still need to repaired. I rely on your feedback to fix any issues with any of my designs, and appreciate any and every comment you can provide - THANK YOU IN ADVANCE. Should you have a custom request, please get in touch....
Topics: rc_drift, RC_wheels, R/C Vehicles, stl, thingiverse, rc_drift_wheels, RC_Car, SlantedRC
4
4.0
Mar 8, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
Wheel Design #2 Design by SlantedRC Wheel Design #2 provided as a solid STL. Drift tires recommended to be used with these wheels can be found here: https://www.thingiverse.com/thing:3580781 Product is yet to be printed, tested and reviewed, and potential flaws on drawings may still need to repaired. I rely on your feedback to fix any issues with any of my designs, and appreciate any and every comment you can provide - THANK YOU IN ADVANCE. Should you have a custom request, please get in touch....
Topics: rc_drift, RC_wheels, R/C Vehicles, stl, thingiverse, rc_drift_wheels, RC_Car, SlantedRC
4
4.0
Mar 8, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
Wheel Design #3 Design by SlantedRC Wheel Design #3 provided as a solid STL. Drift tires recommended to be used with these wheels can be found here: https://www.thingiverse.com/thing:3580781 Product is yet to be printed, tested and reviewed, and potential flaws on drawings may still need to repaired. I rely on your feedback to fix any issues with any of my designs, and appreciate any and every comment you can provide - THANK YOU IN ADVANCE. Should you have a custom request, please get in touch....
Topics: rc_drift, RC_wheels, R/C Vehicles, stl, thingiverse, rc_drift_wheels, RC_Car, SlantedRC
4
4.0
Mar 8, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
Wheel Design #4 Design by SlantedRC Wheel Design #4 provided as a solid STL. Drift tires recommended to be used with these wheels can be found here: https://www.thingiverse.com/thing:3580781 Product is yet to be printed, tested and reviewed, and potential flaws on drawings may still need to repaired. I rely on your feedback to fix any issues with any of my designs, and appreciate any and every comment you can provide - THANK YOU IN ADVANCE. Should you have a custom request, please get in touch....
Topics: rc_drift, RC_wheels, R/C Vehicles, stl, thingiverse, rc_drift_wheels, RC_Car, SlantedRC
4
4.0
Mar 8, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
Wheel Design #5 Design by SlantedRC Wheel Design #5 provided as a solid STL. Drift tires recommended to be used with these wheels can be found here: https://www.thingiverse.com/thing:3580781 Product is yet to be printed, tested and reviewed, and potential flaws on drawings may still need to repaired. I rely on your feedback to fix any issues with any of my designs, and appreciate any and every comment you can provide - THANK YOU IN ADVANCE. Should you have a custom request, please get in touch....
Topics: rc_drift, RC_wheels, R/C Vehicles, stl, thingiverse, rc_drift_wheels, RC_Car, SlantedRC
4
4.0
Mar 8, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
Wheel Design #6 Design by SlantedRC Wheel Design #6 provided as a solid STL. Drift tires recommended to be used with these wheels can be found here: https://www.thingiverse.com/thing:3580781 Product is yet to be printed, tested and reviewed, and potential flaws on drawings may still need to repaired. I rely on your feedback to fix any issues with any of my designs, and appreciate any and every comment you can provide - THANK YOU IN ADVANCE. Should you have a custom request, please get in touch....
Topics: rc_drift, RC_wheels, R/C Vehicles, stl, thingiverse, rc_drift_wheels, RC_Car, SlantedRC
6
6.0
Jan 21, 2021
01/21
by
Pierre-Luc Gagnon (Borrokalari)
data
eye 6
favorite 0
comment 0
The stock RC4WD Land Rover Defender 90 body doesn't have a recessed gas cap like the real thing. I have made this part to emulate the real thing. Print this part. Paint it (optional) Remove the flat part on the Land Rover body Glue the printed part in place. See attached pictures. Gas cap is inspired by a real Defender billet alluminium gas cap.
Topics: RC4WD, Gelande, defender_90, gelande 2, scale truck, thingiverse, RC_Car, 1/10 scale, defender,...
3
3.0
Jun 10, 2021
06/21
by
Henry Shyu (CyanRC)
data
eye 3
favorite 0
comment 0
1.0 beadlock wheels with military inspired styling for the mini RC chassis I designed, featured air vents which can be adjusted when assembling. Comes with integrated support. Fits RC4WD 1.0 tires Important note: DOES NOT FIT ON STANDARD 7mm WHEEL HUB (Axial SCX24) or MINI Z 4x4 as is, but remix are welcomed (step file available) Visit my design https://www.thingiverse.com/thing:4674212 for full vehicle Caution: Please be careful when operating tools and remember to wear safety gears Part list...
Topics: RC_truck, RC_Car, military_truck, rockcrawler, rc_crawler, thingiverse, tatra, wheels, R/C...
3
3.0
Mar 25, 2021
03/21
by
Dillan Asche (dillanasche)
data
eye 3
favorite 0
comment 0
Simple 1/18 diff lock.
Topics: stl, RC_Car, Vehicles, thingiverse
4
4.0
Mar 15, 2021
03/21
by
Kenneth Gibson (Kgibson4)
data
eye 4
favorite 0
comment 0
This is a rally wheel that is designed to be far more scale then the ones on the market as current! please enjoy it, it is free for all as it should be!
Topics: Chevy Truck, Truck, Chevrolet, C10, thingiverse, C20, RC_Car, rc_crawler, K20, Chevy, bLAZER, K10,...
4
4.0
May 1, 2021
05/21
by
Jason Richards (Toka100)
data
eye 4
favorite 0
comment 0
some 1.55 bead lock wheels the hub is the standard rc4wd style. 6 2.5mm screws holds the hub in and 5 countersunk 3x6mm screws hold the rear lock ring in place
Topics: stl, beadlock, 1.55, RC_Car, thingiverse, wheels, R/C Vehicles, rock crawler
3
3.0
Apr 2, 2021
04/21
by
Neil Norton (nnorton00)
data
eye 3
favorite 0
comment 0
I picked up these 1.55" wheels and tires from Amazon for 5 Euro and fell in love with look, but I wanted beadlock wheels instead of gluing the tires. I searched around and couldn't find any 1.55" wheels with a 5mm hex so I decided to take a stab at designing my own. 6 M3 nuts screw into the backside, the length depends on which version you use. 3 designs, the main design of each uses a flat head screw in the center, alternate designs of each allow for a SHCS. Amazon non affiliate link...
Topics: beadlock, RC_wheels, 5mm, rc_crawler, RC_Car, thingiverse, R/C Vehicles, WPL_Crawler, WPL, stl
10
10.0
Jan 17, 2021
01/21
by
Riley Meyer (SILVERADORED)
data
eye 10
favorite 0
comment 0
I have decided to try and print a Lego body for my RC truck project and it would only be fitting to have the wheels match the body. They use 6 M3 bolts + nuts to secure them. They aren't exactly bead lock but the wheel is in parts so it is kind of a bead lock. They use a 12mm hex so they can be used on whatever you want. Had a minor problem with the hex being too small, will reprint soon
Topics: stl, RC_car_12mm_hex, thingiverse, RC_truck, rc_truck_wheel, rc_rock_crawler, R/C Vehicles,...
4
4.0
Mar 25, 2021
03/21
by
dominic michel (domi1974)
data
eye 4
favorite 0
comment 0
For my Suzuki Sierra Jimny 2018 I made some rims to fit MST tires. The rims fit MST KM 90x30mm tires. As you can see it fits the car very nicely. Here you can find the Body: https://www.thingiverse.com/thing:3643268 If you want to mount other tires write me so that we can adjust the rims to your tires.
Topics: stl, R/C Vehicles, Jimny Sierra, thingiverse, 1.9, Felge, rc_felge, Rim, suzuki_Jimny, RC_Car, 2018
6
6.0
Mar 16, 2021
03/21
by
jeremy haynes (explodyninja)
data
eye 6
favorite 0
comment 0
Simple 1.9 wheels based loosely on common off-road wheels. Will require supports but if you place it with the front up it should come out pretty clean on the face of the rim. They should be fairly tough but time will tell. The tires can be glued but because the surface is rougher than injection molded wheels, the tires don't seem to slip too easily.
Topics: Redcat, R/C Vehicles, rc_rock_crawler, RC_Car, stl, thingiverse, scx10, rc_crawler, Remote_control
4
4.0
Apr 13, 2021
04/21
by
Gregor Gerlach (MrCadillacsts)
data
eye 4
favorite 0
comment 0
what you get is a super fine crafted wheel with simulated lugnuts and a set of hubcaps for the Front- and Rearaxle, a beadlock ring and a ring for the inside of the tire. The Beadlock Ring can be screwed to the wheel with 3x12mm screws with plastic thread. Printing: I recommend PLA for printing. The screws will hold very good in this material. You can use the standard settings for PLA. 12.04.2016: Low poly hubcaps added. 12.01.2016: I did some updates for user 802. The database now contains a...
Topics: thingiverse, RC, rc_truck_wheel, Scaler, Axial, scale_accessories, 1.55, stl, Scale_Truck, 1.9,...
4
4.0
Mar 31, 2021
03/21
by
Justin Roudabush (Jroudabush)
data
eye 4
favorite 0
comment 0
Here's files for universal alignment wheels that will work on either 1/10 scale (5MM axle's) or 1/8 scale (12MM axles). You will need to print 2 of each spacer, and honestly a spare wouldn't hurt. Also 1/10 scale is referring mainly to Slashes and other SCT based cars, these may be too large for touring cars, the main wheel portion measures in @ 76MM diameter. P.S. If you need these to be printed for you or if you're into all things RC then check out my FB page:...
Topics: OFNA, RC_Car, thingiverse, team_associated, R/C Vehicles, traxxas, 8th_scale, losi, stl
3
3.0
Mar 26, 2021
03/21
by
Thorsten Smo (DerSmo)
data
eye 3
favorite 0
comment 0
Hello ! Here I´ve got a Euro Pallet in 1/10 for you in LOW Res (less Details) In My Things there will be one in High Res with even more Details, if you like ;-) For 1/10 print it at 100% For 1/14,5 print it at 69% (Tamiya) For 1/16 print it at 62,5 % (Bruder,Wedico) If you like it and enjoy, please leave a "like" - it will mean much to me! Thanks !
Topics: stl, R/C Vehicles, thingiverse, rc_forklift, RC_truck, RC_Car
3
3.0
Mar 26, 2021
03/21
by
Thorsten Smo (DerSmo)
data
eye 3
favorite 0
comment 0
Hello ! Here I´ve got a Euro Pallet in 1/10 for you in High Res In My Things there will be one in low Res with even less Details, if you like ;-) For 1/10 print it at 100% For 1/14,5 print it at 69% (Tamiya) For 1/16 print it at 62,5 % (Bruder,Wedico) If you like it and enjoy, please leave a "like" - it will mean much to me! Thanks !
Topics: stl, R/C Vehicles, thingiverse, rc_forklift, RC_Car
2
2.0
Nov 30, 2021
11/21
by
Martin Dz (Martin089)
data
eye 2
favorite 0
comment 0
Youtube: https://www.youtube.com/channel/UC1TvQhLswn7xaqo4nip_7Bg Instagram: https://www.instagram.com/martindmodels/ I would like to share with you my Audi S3 RC model made in 1/10 scale. All parts for this model was printed on Prusa MK2 clone printer. All parts are from PETG or PLA material. All parts was sliced in Prusa Slicer, I using nozzle 0.35mm and layer high 0.12-0.28. Body dimensions: - wheel base: 251mm (I modified chasssis to fit this wheel base) - width: 185mm - overall length:...
Topics: scale_model, Audi_s3, thingiverse, RC_model, drift, RC_Car, MartinD, stl, rc_drift, R/C Vehicles,...
2
2.0
Apr 19, 2022
04/22
by
Alen Walker (TMNg)
data
eye 2
favorite 0
comment 0
This body is for 1/10 RC car is good for putting on a RC car and vacuum forming I try to put on my 3racing Xi sport and Xq1s and tt02 is fit for them so most rc touring car is fit for this body any problem please let me know and if you have any part or sticker also please let me know The BMW M1 is a mid-engine sports car produced by German automotive manufacturer BMW from 1978 to 1981. In the late 1970s, Italian automobile manufacturer Lamborghini entered into an agreement with BMW to build a...
Topics: thingiverse, RC_Car, rc_body, BMW, stl, R/C Vehicles
2
2.0
Apr 20, 2022
04/22
by
Alen Walker (TMNg)
data
eye 2
favorite 0
comment 0
This body is for 1/10 RC car is good for putting on a RC car and vacuum forming I try to put on my 3racing Xi sport and Xq1s and tt02 is fit for them so most rc touring car is fit for this body any problem please let me know and if you have any part or sticker also please let me know
Topics: thingiverse, Bmw_M3, RC_Car, rc_body, BMW, stl, R/C Vehicles
2
2.0
Apr 19, 2022
04/22
by
Alen Walker (TMNg)
data
eye 2
favorite 0
comment 0
This body is for 1/10 RC car is good for putting on a RC car and vacuum forming I try to put on my 3racing Xi sport and Xq1s and tt02 is fit for them so most rc touring car is fit for this body any problem please let me know and if you have any part or sticker also please let me know
Topics: thingiverse, bugatti, RC_Car, chiron, rc_body, stl, R/C Vehicles
4
4.0
Apr 8, 2021
04/21
by
Chris Dixon (Dnaenergy98)
data
eye 4
favorite 0
comment 0
This is a stand made for a 1/10 2wd buggy (designed around an rc10b5). The legs are 50mm high so the wheels are barely suspended in the air to make cleaning at the track easier.
Topics: R/C Vehicles, rc_car, buggy, rc, scale, stl, team_associated, thingiverse, stand, car, 2wd, 110
