6
6.0
Mar 2, 2021
03/21
by
Ken Kelly (Ken73)
data
eye 6
favorite 0
comment 0
This is my original design I created back in 2012 to help me while reloading; the idea is that you slip 5 pieces of brass in the holes and squeeze so they're all fixed in place; at that point you have a good grip on 5 pieces of brass at once that you can run on your case prep center. When running singles (especially in large quantities) your hands cramp up - this is to help alleviate that. Print two of the top/bottom ones and one middle; attach the top/bottom pieces with the middle one - in the...
Topics: reloading, thingiverse, stl, reloading_tools, Sport & Outdoors, cartridge_reloading
6
6.0
Mar 15, 2021
03/21
by
Alex Gibson (AlexanderGi)
data
eye 6
favorite 0
comment 0
A funnel to free up a hand when reloading. Screw the funnel to the corner of a bench with 2 countersink screws, hold the cartridge against the bottom funnel and pour the gunpowder in. Top opening is 30mm wide, accepts cartridges 4.9 to 12mm.
Topics: reloading, thingiverse, reloading_press, shooting, Other, cartridge_reloading, reloading_tools,...
1
1.0
Dec 14, 2021
12/21
by
Jack Deeneye (SirShorty)
data
eye 1
favorite 0
comment 0
This is a simple bump die thought up by Mr. Matthews. once you place the bullet in the die you hammer on the punch and it will expand the bullet about .001"-.002" in diameter. Don't bother printing this, there is no way printed material is strong enough to withstand constant hammer punching against solid lead. I just wanted to get the design out there and maybe someone can machine them. I'm including an excerpt from a book detailing how to make it and how to use it. I'm also throwing...
Topics: reloading_dies, stl, cartridge_reloading, thingiverse, gun, reloading_tools, reloading, Sport &...
6
6.0
Jan 3, 2021
01/21
by
(LionFox)
data
eye 6
favorite 0
comment 0
This is a replacement for a case slider for a 9mm Lee Pro1000 press. I found that the original part pushed the cases too low and caused them to topple. This is a remix of Mohvee's case slider, I found that it was just easier to print it all in one go and to remove the ring on the back of the slider.
Topics: Parts, stl, cartridge_reloading, firearm, thingiverse, reloading_tools, Pro1000, reloading, Lee,...
2
2.0
May 1, 2021
05/21
by
Carsten Schmidt (kuee)
data
eye 2
favorite 0
comment 0
Jig to mark your brass to easily find it at the range or during competition. Only needs supports for the overhanging hinge pieces. The holes print just fine without any support. YM For the hinge I used some 6mm carbon rod. the holes are just undersized. I drilled the part which holds the markers with a size "B" drill bit and the other piece with a size "C" drill bit. it allows enough friction to hold together but allows the part to move freely. YMMV.
Topics: stl, reloading_tools, cartridge_reloading, reloading, Hand Tools, thingiverse, rifle
8
8.0
Jan 16, 2021
01/21
by
Jesse Miller (jdmiller1107)
data
eye 8
favorite 0
comment 0
This is a powder baffle for the Lee auto drum. I use this on my Loadmaster for 9mm and works great. I have two models to choose from, PowderBaffle.stl has two 9mm x 6mm holes for ball powder and PowderBaffleLg.stl has two 10mm x 15mm holes for extruded powders. Both models have a strong corner reinforcement to prevent it from braking during installation.
Topics: cartridge_reloading, reloading, Lee_Loadmaster, thingiverse, reloading_press, Other, stl
7
7.0
Mar 19, 2021
03/21
by
Bexar Arms (BexarArms)
data
eye 7
favorite 0
comment 0
A 50 round reloading tray inspired by the ever popular Frankford Arsenal Perfect Fit reloading trays. This design is slightly different by allowing the neck of the cartridge to rest in it's own pocket, giving the cartridge more stability when placed in the tray upside down. The stackable design allows for convenient storage. This tray will also stack with the other reloading trays that I've designed! .308 Winchester, 6.5 Creedmoor, 30-06 Springfield, .243 Winchester, and other cartridges that...
Topics: Tool Holders & Boxes, reloading_tools, reloading, thingiverse, Reloading_Tray,...
8
8.0
Jan 19, 2021
01/21
by
Ernst Bohm (pilotwavefan)
data
eye 8
favorite 0
comment 0
thing is for casefeed arm of a dillon xl650 press. The medium case bushing lower diameter is too big so the cases block and do not fall down. This bushing is smaller in dia, so the cases wont block on the edges. Unfortunately it doesnt slice in repetierhost because .2mm is too big. But perhaps someone can use this.
Topics: cartridge_reloading, reloading, reloading_press, thingiverse, Sport & Outdoors, stl
8
8.0
Jan 15, 2021
01/21
by
Juan Maverick (jpmaverick)
data
eye 8
favorite 0
comment 0
Bullet ejector for Hornady LnL single stage reloading press. Really simple design and pretty helpfull, speeds process up quiet a bit.
Topics: hornady, cartridge_reloading, thingiverse, reloading, Sport & Outdoors, stl, reloading_tools,...
2
2.0
Jun 7, 2021
06/21
by
Krung (Krung)
data
eye 2
favorite 0
comment 0
Powder funnel specifically for the 204 Ruger cartridge.
Topics: Sport & Outdoors, cartridge_reloading, Ruger 204, Ruger, reloading_press, reloading,...
1
1.0
Sep 13, 2021
09/21
by
John Cocktosten (redblot300)
data
eye 1
favorite 0
comment 0
This case feed tube is designed to work with the base of the Lee Loadmaster Feed Plate Assembly. Adapters can be created to feed cases into the top. My configuration uses a 1/2" hydraulic hose line. 4mm proximity sensor is used to activate the case feed motor. Below are links for proximity switch and hose line for reference. There are other sources for these same parts. Hydraulic Hose: https://www.ebay.com/itm/202074049953 Proximity Switch: https://www.ebay.com/itm/124835985323 I printed...
Topics: stl, reloading, thingiverse, cartridge_reloading, reloading_press, reloading_tools, Lee_Loadmaster,...
1
1.0
Nov 30, 2021
11/21
by
Mal Dowling (Awinspired)
data
eye 1
favorite 0
comment 0
310 Cadet reloading tray. STL and FreeCAD file included. FreeCAD file is parametric so the tray can be easily modified for other calibres through the Parameters tab. Not yet printed so any issues please message me.
Topics: Reloading_Tray, reloading_tools, reloading, thingiverse, stl, Tool Holders & Boxes
6
6.0
Mar 15, 2021
03/21
by
Frankie Coda (FrankieC)
data
eye 6
favorite 0
comment 0
Created a Lee Die Spanner for tightening of Lee dies.
Topics: reloading, Sport & Outdoors, thingiverse, reloading_dies, reloading_tools, Lee, stl
4
4.0
Jan 7, 2021
01/21
by
Tony McCoy (Manadevil)
data
eye 4
favorite 0
comment 0
Roll Crimp for 12 Gauge this is in test so please feel free to help improve. Going to try printing with PLA and will see How many it will crimp before have to make another. if you print with any other type filament please let me know so i can add info with it or post it in comments Thank you
Topics: Tools, Roll Crimp, stl, reloading_tools, reloading, thingiverse, 12ga Reloading
4
4.0
Jan 19, 2021
01/21
by
milos miletic (Mr_N0)
data
eye 4
favorite 0
comment 0
No magnet required, PLA 30 % infill, support needed...
Topics: reloading, reloading_tools, Reloading_Tray, thingiverse, Parts, Frankford_Arsenal, stl
3
3.0
Jun 7, 2021
06/21
by
Ethan Kaiser (KennyJPowers)
data
eye 3
favorite 0
comment 0
I created this case gauge holder for Shockbottle case gauges. I don't know if it fits other 100 round case gauges, I designed it to fit mine (9mm) it also has holes on the side for single round case gauges, they are designed to hold Dillon and Hornady gauges (7/8" diameter). The idea is to raise up the gauge so the rounds can sit flush, it raises the gauge by .25". 4/14/2020- I just drew this up as an exercise to learn Fusion 360. I designed it with 3D printing in mind, that being...
Topics: cartridge_reloading, Tool Holders & Boxes, reloading, thingiverse, stl, reloading_tools
3
3.0
May 1, 2021
05/21
by
Bruce Buchner (Buchnerb)
data
eye 3
favorite 0
comment 0
My shop has pegboard walls (USA pattern). I wanted to mount my various tool heads for my Dillon 550 bullet reloading press so they would be handy when changing calibers. I found a really nice mount on Thingiverse but it was made to screw directly into a wall. I added a peg pattern to the back in Tinkercad to fit USA standard pegboard and printed it in PLA. The PLA is working just fine but if you are concerned you may want to print in PETG. The remix tab in Thingverse is still broken and I can't...
Topics: stl, Dillon, Dillon_550, reloading_press, reloading_tools, Sport & Outdoors,...
5
5.0
Apr 2, 2021
04/21
by
Morgan Miller (Byttorr1100)
data
eye 5
favorite 0
comment 0
This is a Hornady shell plate holder that I made. I included the Fusion 3d model in case you want to adapt it. This is my first model, so I'm sure it could have been better. There are parametric values. My model will hold 8 plates.
Topics: reloading_tools, cartridge_reloading, hornady_LNL, Sport & Outdoors, thingiverse, reloading,...
8
8.0
Jan 4, 2021
01/21
by
Zumsel Ombie (Baehm)
data
eye 8
favorite 0
comment 0
This wrench is used to lock or unlock RCBS die nuts with fingers only. It is a remix of the "Lee reloading die retaining nut wrench", designed by dingo, Ther print was done in petg, but pla will work perfect too.
Topics: die nut wrench, RCBS, Other, wrench, stl, reloading_tools, reloading, reloading_dies, thingiverse,...
11
11
Jan 18, 2021
01/21
by
John Stith (functionaldiyer)
data
eye 11
favorite 0
comment 0
I designed this to fit on an Akro Mils 30220 bin. It expands from about 400-500 9mm brass to roughly 700. Make sure you check out the video where I go over this at: https://youtu.be/V7VFKyJeaf8 I am also doing a Polymer80 giveaway so make sure to check that out on my channel and website in the video description.
Topics: cartridge_reloading, Dillon, reloading, reloading_tools, Dillon_XL650, Other, thingiverse,...
4
4.0
Apr 1, 2021
04/21
by
Aaron Pasteris (pastera)
data
eye 4
favorite 0
comment 0
Updated - Should be good to go now Make a custom slider for your APP for bullets that don't feed well with the stock sliders. Settings are pretty self explanatory - sorry for the mixed units. If you want everything in metric, set the variable inch = 1. Needs to be printed with the feet down with support If any of my designs help you out, a comment is appreciated and tips are always welcome.
Topics: reloading_tools, reloading_press, Sport & Outdoors, thingiverse, Lee, reloading, stl
5
5.0
Mar 5, 2021
03/21
by
matt perdue (fire4200)
data
eye 5
favorite 0
comment 0
wall mount for frankford arsenal #8 tray
Topics: wall_mount, stl, Hobby, reloading, Reloading_Tray, reloading_tools, thingiverse
2
2.0
Mar 15, 2021
03/21
by
Jeff Miller (DavrosJr55)
data
eye 2
favorite 0
comment 0
This is my version of a bullet tray for the left side of my Dillon 550. The original states XL750 - but the bolt pattern is the same. As the bolt pattern is not perfectly square and symmetrical, I have modified this version to rotate the tray 90 degrees so that it sits a bit further forward. I have found this my convenient. This is a remix from https://www.thingiverse.com/thing:4357512
Topics: Sport & Outdoors, thingiverse, reloading_press, cartridge_reloading, reloading_tools, stl
10
10.0
Jan 13, 2021
01/21
by
Morten Rustad (MortenR)
data
eye 10
favorite 0
comment 0
5 die wall holder for "Standard" dies 7/8"-14 threads for most manufacturers (RCBS, Lyman, Dillon, LEE, Redding ect.)
Topics: thingiverse, Sport & Outdoors, stl, reloading_tools, reloading_die, reloading_dies
5
5.0
Jan 6, 2021
01/21
by
Richard Holbert (buckeye43210)
data
eye 5
favorite 0
comment 0
X-press shellholder for Lee App Press.
Topics: stl, cartridge_reloading, reloading_tools, handload, Sport & Outdoors, reloading, thingiverse
8
8.0
Jan 15, 2021
01/21
by
Jason Nguyen (JNpixels)
data
eye 8
favorite 0
comment 0
chargemaster cap with powder name. now you know what powder is in the chargemaster
Topics: charmaster, gun, cartridge_reloading, thingiverse, reloading, stl, reloading_tools, Other
4
4.0
Apr 20, 2021
04/21
by
Aaron Pasteris (pastera)
data
eye 4
favorite 0
comment 0
Have you switched over to Hi-Tek or powder coating your cast bullets but still have your lubrisizer? This adapter guides bullets outward and down as they pass through the die so that they don't stack up and jam. I am able to nose down size about 15 lbs of 9mm per hour pretty easily using this. Directions: 1 - remove sizing die (remember to warm up the press if it has hard lube!) 2 - remove push out rod (12 on parts diagram) 3 - remove the pin from the die 4 - install the die 5 - install the...
Topics: thingiverse, reloading_tools, stl, Other, reloading
2
2.0
May 1, 2021
05/21
by
Jack Deny (Prosciutto77)
data
eye 2
favorite 0
comment 0
The title pretty much explains it. I recently lost this part and it took me about 3 weeks to get another so I thought I'd make it in fusion. I haven't printed it yet since 10-24 threads seems like an impossibility to print but who knows.
Topics: stl, thingiverse, reloading_tools, Tools, reloading
5
5.0
Mar 17, 2021
03/21
by
Bexar Arms (BexarArms)
data
eye 5
favorite 0
comment 0
A 50 round reloading tray inspired by the ever popular Frankford Arsenal Perfect Fit reloading trays. The stackable design allows for convenient storage. This tray will also stack with the other reloading trays that I've designed! Because of how large the rim on the case is, I've made two separate versions, one with the caliber designation on the top of the tray, and one without the markings on top. By removing the markings on top, I was able to provide more room to spread the cases out for a...
Topics: reloading, cartridge_reloading, Sport & Outdoors, stl, thingiverse, Reloading_Tray, 45-70
1
1.0
Jan 19, 2022
01/22
by
Chris Wallace (UncleTestes)
data
eye 1
favorite 0
comment 0
Another request from my dad. He was tired of the factory cup not properly catching primers and asked me to design one with an up- and rearwards-leaning ramp to catch them better, and says this one has yet to miss a primer. This fits exclusively on a Dillon RL 500D multistage press. I cannot confirm if it will fit on any others. Requires no supports.
Topics: primer_catcher, Parts, reloading, thingiverse, reloading_press, stl, firearm, reloading_tools
6
6.0
Mar 3, 2021
03/21
by
Cm Mil (cmil1207)
data
eye 6
favorite 0
comment 0
This is a simple tool holder for my Hornady Lock-n-Load press. Its small enough to be out of the way and still be convenient. It has spots for four Allen keys and a brush. The four keys are: 5/16 - For the plate 5/32 - For the primer tube 1/8 - For the powder dispenser 3/32 - For the lock rings on the dies It uses clips I created that attach to the press arm without any tools, just push them on and the extensions will hold things in place. There are two types of clips here. One with extensions...
Topics: hornady, cartridge_reloading, Other, reloading, thingiverse, hornady_LNL, stl, reloading_tools
6
6.0
Apr 17, 2021
04/21
by
An Mu (86am)
data
eye 6
favorite 0
comment 0
Simple cover for ram of RockChuckerIV reloading press prevents spilled primers.
Topics: reloading, cartridge_reloading, thingiverse, rockchucker, stl, Sport & Outdoors,...
2
2.0
May 1, 2021
05/21
by
Serguei Trouchelle (trouchelle)
data
eye 2
favorite 0
comment 0
A funnel for Frankford Arsenal Rotary Tumbler. I usually put it next to the press when I'm depriming brass and throw deprimed cases in the bowl. Should be helpful if you just need to dump a lot of cases inside too. There are two sizes: 200mm diameter (fits Ender 3) and 290mm diameter (fits CR-10). There are also slim versions that you probably want to actually print unless you have issues with overhangs. Regular version is a 45 degrees cone, slim is roughly 50 degrees. Both should print fine...
Topics: stl, Dillon, reloading_funnel, Frankford_Arsenal, reloading_tools, Sport & Outdoors,...
1
1.0
Nov 8, 2021
11/21
by
Jack Deeneye (SirShorty)
data
eye 1
favorite 0
comment 0
This is a replacement for the lock ring. This works with RCBS seater plugs and Lyman "M" type expander plugs. The locking ring screw is an M4 x 0.17 screw thats 16mm long. I used 30% infill for this. I'm not even gonna bother telling you what settings to use as I am still have major stringing issues.
Topics: Sport & Outdoors, stl, reloading, cartridge_reloading, thingiverse, RCBS, Lyman, reloading_tools
4
4.0
Mar 17, 2021
03/21
by
Frank BeFay (Mr_Harmless)
data
eye 4
favorite 0
comment 0
This is a remix of Grahn's Dynamic Powder Scoop. I tossed some code in to print the capacity of the scoop onto the handle for convenience.
Topics: powder_measure, Tools, reloading, cartridge_reloading, reloading_tools, gunpowder, stl, thingiverse
4
4.0
Mar 17, 2021
03/21
by
Edward Caco (caco06777)
data
eye 4
favorite 0
comment 0
This is a snap-on primer catcher chute with a removable tray. Specifically for a single stage reloading press. Happy Reloading!
Topics: Tools, reloading_press, reloading, stl, thingiverse
0
0.0
Apr 20, 2022
04/22
by
Sanman (Iamsanman)
data
eye 0
favorite 0
comment 0
Took the original, and made a larger opening to facilitate the Supereyes Camera. Printed threads up.
Topics: thingiverse, camera, supereyes, powder_measure, reloading_tools, reloading_press, stl, Sport &...
3
3.0
Apr 1, 2021
04/21
by
Bexar Arms (BexarArms)
data
eye 3
favorite 0
comment 0
A 50 round reloading tray inspired by the ever popular Frankford Arsenal Perfect Fit reloading trays. The stackable design allows for convenient storage. This tray will also stack with the other reloading trays that I've designed! 45 AUTO RIM, as well as other cartridges that share similar case dimensions will all fit in this reloading tray. Print with PLA or some other filament with high dimensional stability/low shrink factor, and a decently tuned printer is highly advised, as the tolerances...
Topics: reloading_tools, cartridge_reloading, thingiverse, Tool Holders & Boxes, 45_auto_rim,...
2
2.0
Apr 1, 2021
04/21
by
Bexar Arms (BexarArms)
data
eye 2
favorite 0
comment 0
A 50 round reloading tray inspired by the ever popular Frankford Arsenal Perfect Fit reloading trays. This design is slightly different by allowing the neck of the cartridge to rest in it's own pocket, giving the cartridge more stability when placed in the tray upside down. The stackable design allows for convenient storage. This tray will also stack with the other reloading trays that I've designed! 450 Bushmaster, as well as other cartridges that share similar case dimensions will all fit in...
Topics: reloading_tools, cartridge_reloading, thingiverse, 450Bushmaster, Tool Holders & Boxes,...
4
4.0
Mar 17, 2021
03/21
by
Bexar Arms (BexarArms)
data
eye 4
favorite 0
comment 0
A 50 round reloading tray inspired by the ever popular Frankford Arsenal Perfect Fit reloading trays. This design is slightly different by allowing the neck of the cartridge to rest in it's own pocket, giving the cartridge more stability when placed in the tray upside down. The stackable design allows for convenient storage. This tray will also stack with the other reloading trays that I've designed! 6.8 SPC as well as other cartridges that share similar case dimensions such as 224 Valkyrie,...
Topics: 68spc, thingiverse, reloading, cartridge_reloading, reloading_tools, 68_spc, Sport & Outdoors,...
4
4.0
Nov 8, 2021
11/21
by
Brian Lee (packydb)
data
eye 4
favorite 0
comment 0
This is a spanner wrench for Lee Precision reloading dies. It has two ends, one for the older style 6 sided nut style lock ring and the other for the newer spline type lock ring. Understandably, Lee redesigned their reloading die lock rings because one... their clear instructions say to tighten this ring "finger tight" and the hex nut allowed for the use of a usually large adjustable wrench to tighten it... and two, the newer spline lock ring design allowed for better finger...
Topics: Sport & Outdoors, stl, reloading, Lee, Locknut, reloading_dies, cartridge_reloading,...
2
2.0
Apr 17, 2021
04/21
by
Ian Spiller (ian99rt)
data
eye 2
favorite 0
comment 0
NOTE: First test results: Make sure you install the agitator so the cups are pointed in the clockwise direction when looking down the open tube. If the agitator is oriented that the scoops work in the direction of rotation then you can get brass stuck in them and those brass pieces don't get fully worked. Good news is after 1 hrs tumbling the pipe full of 5.56 and 45acp brass came out cleaner then when in the rubber drums for 1.5 hours. I started tumbling my 45acp brass with a HF dual drum...
Topics: reloading, tumbler, cartridge_reloading, thingiverse, reloading_tools, Tools, stl, rock_tumbler
3
3.0
Apr 1, 2021
04/21
by
Aaron Pasteris (pastera)
data
eye 3
favorite 0
comment 0
Make a custom slider for your APP for Cases that don't feed well with the stock sliders. Settings are pretty self explanatory - sorry for the mixed units. If you want everything in metric, set the variable inch = 1. Note: Print with feet down and support enabled. If any of my designs help you out, a comment is appreciated and tips are always welcome.
Topics: reloading_tools, reloading_press, Sport & Outdoors, Reloading, cartoon, thingiverse, Lee, stl
14
14
Jan 11, 2021
01/21
by
Gary Griffin (wt4y)
data
eye 14
favorite 0
comment 0
This may be a trivial part, but if you break or lose yours, you'll need another. This holds the primer catcher tray on the RCBS Rock Chucker reloading press. They sure don't make things like they used to. I've only been reloading with this thing for 42 years and already something broke.
Topics: cartridge_reloading, thingiverse, reloading, RCBS, stl, Other, primer_catcher, reloading_press
1
1.0
Jan 18, 2022
01/22
by
Randy Lisano (gpraceman)
data
eye 1
favorite 0
comment 0
After having the stock bottle pop off more than once, spilling primers all over the floor, I wanted a better solution. While I could have done with some other type of fitting that holds a bottle more firmly, I decided to have the bottle sit on the floor and have a hose between the press and the bottle. No worries about a bottle falling off and spilling primers. So, I redesigned the soda bottle adapter to have a hose bard on it. Works with small and large primers. This is used with a 3/8"...
Topics: reloading, thingiverse, Tool Holders & Boxes, reloading_press, stl, Lee, reloading_tools
7
7.0
Jan 5, 2021
01/21
by
Kirk Valko (valkokir)
data
eye 7
favorite 0
comment 0
There are quite a few versions of these primer catchers but I wanted something specific. This replaces only the back half of the stock primer catcher. The catcher needs to flex considerably in order to install on the press and I wanted to maintain that resilience on the assembly. My new back half is a tight fit onto the front half and simply deflects the spent primer to the tube side. I printed this as one piece but also created a 2 piece version that should require no supports and prints in...
Topics: RCBS, RCBS_Rock_Chucker, stl, Supreme, cartridge_reloading, reloading_tools, Sport & Outdoors,...
2
2.0
Oct 14, 2021
10/21
by
Ron Harding (rharding13)
data
eye 2
favorite 0
comment 0
I modified the [Powder Trickler](https://www.thingiverse.com/thing:2846719) by [Nick van Noordwyk](https://www.thingiverse.com/nj_v_n/designs), to add a cap to the bottom. That made it easy to some weight for stability.
Topics: thingiverse, guns, stl, reloading, Sport & Outdoors, cartridge_reloading, firearms,...
11
11
Jan 20, 2021
01/21
by
Daryl Hench (dhench)
data
eye 11
favorite 0
comment 0
These plates were designed for the Lee Bench Plate Reloading Press Mount LEE 90251. One model is blank except for the two rear locating holes. The second model has all the bolt holes for a majority of Lee reloading presses. I set infill density at 50% and wall, top and base thickness at 2.4mm with no problems Bench Plate Link:...
Topics: reloading, Lee, reloading_tools, thingiverse, reloading_press, Sport & Outdoors, bench, stl
5
5.0
Apr 20, 2021
04/21
by
Bexar Arms (BexarArms)
data
eye 5
favorite 0
comment 0
Updated 2/12/2019 - Fixed scale issue Updated 1/26/2019 - Added neck pocket. A 50 round reloading tray inspired by the ever popular Frankford Arsenal Perfect Fit reloading trays. This design is slightly different by allowing the neck of the cartridge to rest in it's own pocket, giving the cartridge more stability when placed in the tray upside down. The stackable design allows for convenient storage. This tray will also stack with the other reloading trays that I've designed! 30-30 Win. and...
Topics: thingiverse, stl, Sport & Outdoors, reloading, Reloading_Tray, 30-30, cartridge_reloading
4
4.0
Apr 27, 2021
04/21
by
Aaron Pasteris (pastera)
data
eye 4
favorite 0
comment 0
Allows you to dispense directly from a 1lb bottle of powder (Hodgdon brand), reducing the chance of mixing powders. Tested with the AutoDrum - it should work with the other Lee powder drops. 3/25/2020 - Updated to add valve and new adapter with a better fit. Link to Design: https://a360.co/2xPpJWO If any of my designs help you out, a comment is appreciated and tips are always welcome.
Topics: reloading_tools, thingiverse, reloading, Lee, stl, Sport & Outdoors, guns, reloading_press
