9
9.0
Jan 18, 2021
01/21
by
Vasilii Guma (vasiok677)
data
eye 9
favorite 0
comment 0
Universal spool holder, it can be mounted vertically, horizontally, and on a stand. You can design your own stand for the printer you own, will design a stand for Prusa when I have some spare time. Hardware you will need: 1. One 5/16" bolt 3 1/2" long 2. One 5/16" Lock nut 3. Two 608 bearings. Note: If you want to increase the resistance so the spool does not unwind itself when the print head moves just tighten the nut a bit until until you feel comfortable....
Topics: spoolholder, filament_spool_holder, 3D Printer Accessories, spool, spool_stand, universal,...
4
4.0
Mar 10, 2021
03/21
by
Valentin SIMON (nanoDigital)
data
eye 4
favorite 0
comment 0
Hi all, for a long time i searched for a good filament spool holder for 2.5kg spools which was compatible with the Anet A8 i own. I tried several things, and everytime the extruder was trying to pull the filament and ended up lifting from the bed, causing failing prints. I have my own remix of the Ikea LACK hack enclosure found there : https://www.thingiverse.com/thing:2864118 (I had to lift up the top of the enclosure in order to fit my modified AM8, but that is another story.) Anyway, i...
Topics: 3d_printer_enclosure, stl, thingiverse, spool_holder, filament_spool_holder, 3D Printer Parts
5
5.0
Jun 11, 2021
06/21
by
(Vaso)
data
eye 5
favorite 0
comment 0
Summary I use 40% infill for bracket and 20% for all other parts. no supports needed use concentric top and bottom patter for all parts, except bracket. if you mount spool holder at the top of the frame, you should use pack of balls 4...6mm - spool holder base and spool holder cone is the bearing, so just add some balls (that's why you should use concentric pattern). I use BB balls 4.5 mm. you also need 1 flathead screw M3x16-20 to fix 2020 bracket and spool holder base together. don't forget...
Topics: 2020, Creality, spool_holder, thingiverse, filament_spool_holder, stl
9
9.0
Apr 23, 2021
04/21
by
Victor Lytsus (vlbot)
data
eye 9
favorite 0
comment 0
Simple 3D printed universal filament spool holder. You need to print 2 holders 4 rollers and use 4 bolts for 3-4 mm hole.
Topics: stl, filament_spool_holder, 3D Printer Accessories, thingiverse
3
3.0
Mar 13, 2021
03/21
by
Vincent ESTRADE (Roudoud)
data
eye 3
favorite 0
comment 0
Designed to hold a Arianeplast 8kg spool.
Topics: 3D Printer Accessories, thingiverse, filament_spool_holder, spool_holder, stl, filament_spool
3
3.0
Apr 4, 2021
04/21
by
Valera Perinski (Perinski)
data
eye 3
favorite 0
comment 0
Adaptive Spool Holder Some of my new filament spools have a huge hole diameter. My old holder just falls into them. I had to make new ones. Parts links below: Bearings 688zz Screws Insert Nuts M3 Insert Nuts M8 Links to used tools: Mini Wireless Grinder Polishers Buffers Abrasive Dremel Tools LAOA Mini Hand Tools NOGA deburring tool and Blades My favorites filament: My some other things: ...
Topics: thingiverse, 3D Printer Accessories, Adaptive, stl, Spool Holder
6
6.0
Jan 21, 2021
01/21
by
Valtteri Wikstrom (valtte)
data
eye 6
favorite 0
comment 0
I made this filament spool holder to improve printing speed and to prevent extruder clicking. The design works with any spool that is larger than 10cm (3.9 ") in diameter and less than 13cm (5.1") wide. This spool holder uses four 608 bearings. The same bearings that are used on fidget spinners, Skateboards etc. and they are also pretty cheap. Part list: -4x 608 BEARING. -4x m8x25 Countersunk Head Screw Bolt. (not necessarily can also be printed) -4x m8 nut. (not necessarily can also...
Topics: spool_mount, filament_spool_holder, filament, 3D Printer Accessories, spool, stl, roll,...
3
3.0
Mar 31, 2021
03/21
by
Vincent Onessimo (Vintron)
data
eye 3
favorite 0
comment 0
Container that can be inserted into AmazonBasics Filament Spool.
Topics: container, 3D Printing, thingiverse, filament_spool_holder, stl
10
10.0
Jan 11, 2021
01/21
by
Vinz Dup (DaVinz_eCode)
data
eye 10
favorite 0
comment 0
This spoolholder is designed to work with two rollersblade's ballbearing : 2x Ballbearing (standard rollerblade ballbearing) Inner diam 8mm Outer diam 22mm This spoolholder is in two parts, you will need to print the file two time (2x). Just insert ball bearings in there place and lock the two parts into the spool hole. Tada ! This way, you can put two spools on the single axe of the anet A8 included spool holder !
Topics: Billes, roulement, filament_spool_holder, thingiverse, stl, filament, 3D Printer Accessories,...
8
8.0
Jan 20, 2021
01/21
by
Viswa (viswakarma)
data
eye 8
favorite 0
comment 0
Spool holder to reuse the original Anet A8 8mm rod. The holder slides on the body frame, no need to screw it on the body frame. The stem is connected to the base by M3 screws that was extra from the original assembly. Quick and easy spool change. The height of the stem is keeping the filament roll close to the body frame with a low CG, so less shaking during print. Higher the filament roll, more vibration the body frame will expereince. The extension thread extends the original rod for better...
Topics: 3D Printer Parts, filament_spool_holder, 8mm_rod_holder, thingiverse, Anet A8, spool_holder, stl
3
3.0
Apr 2, 2021
04/21
by
VALENTYN KHYLCHUK (sv_Valentyn)
data
eye 3
favorite 0
comment 0
Simple holder for filament spool.
Topics: thingiverse, Anet_A8, spool_holder, 3D Printer Accessories, stl
4
4.0
Jun 6, 2021
06/21
by
Vlad Shitz (Radyro)
data
eye 4
favorite 0
comment 0
I printed this Spool holder https://www.thingiverse.com/thing:1241566 and i wanted to use my old anycubic acrylic spool holder, but it was a bit to wide, so i created another version in Fusion 360.
Topics: thingiverse, 3D_printing, 3D Printer Accessories, connector, spool_holder, stl
6
6.0
Mar 17, 2021
03/21
by
Victor Glekler (VICLER)
data
eye 6
favorite 0
comment 0
This is a remix of my Kossel top spool holder. I designed it for using two 608 bearings instead of HDD motor. For assembly you will need: - M4 x 9mm screws (3pcs) - M4 x 12mm screws (6pcs) - M4 nut (9pcs) - 608 (skateboard) bearings (2pcs) See original https://www.thingiverse.com/thing:3254095 for instructions how to put the nuts inside the model. Have fun and do not forget to post a make!
Topics: Anycubic_Kossel_Plus, Anycubic, kossel, spool_holder, 3D Printer Parts, spool, stl, mount,...
5
5.0
Jun 10, 2021
06/21
by
Victor Glekler (VICLER)
data
eye 5
favorite 0
comment 0
Hi there! This is my filament spool holder for Anycubic Kossel Plus with old HDD motor using as bearing. For assembly you will need: - Removable HDD motor with 3 nut holes (like on picture) - M3 9mm screw (3pcs) - M3 nut (3pcs) - M4 12mm screw (6pcs) - M4 nut (6pcs) That's all ! Update: - added Spool_plate_v3 with rounded edges - added Spool_plate_v3 with solid bottom layer. So you can cut out the nut holes you need (It is just one layer thick and easy to cut out) or pause the print at last...
Topics: spool, Anycubic_Kossel_Plus, Anycubic, kossel, spool_holder, spool_mount, 3D Printer Parts,...
7
7.0
Jan 5, 2021
01/21
by
VeyCol (VeyCol)
data
eye 7
favorite 0
comment 0
Heavily inspired by the spool holders on Voron printers. Never seen PTFE being used for spool holding and I would like to give it a try. Designed to fit 4mm PTFE tubes and the stock I3 Mega S spool holder. My main concern is that the PTFE wouldn't be very wear-resistant, so I would like to try other materials such as polished stainless steel rods in the future. But if the Voron designers chose PTFE there must be a good reason. Just print both halves (they are slightly different to avoid...
Topics: Anycubic_Kossel, Anycubic_I3_Mega, stl, spool_holder, Anycubic, filament, thingiverse, 3D Printer...
6
6.0
Mar 13, 2021
03/21
by
Vlastimil Novák (novakvlast)
data
eye 6
favorite 0
comment 0
I had some issues with spool getting stuck sometimes on the original spool holder causing underexstrusion, so I created this one. You will need: 2x 608ZZ 8x22x7 bearings 1x steel rod approx. 8x160 mm (or shorter and don't use spacers) 2x M3x10 bolts 2x M3 nuts You can adjust spacers and cap lenght by changing Z axis hight.
Topics: 3D Printer Accessories, thingiverse, filament_spool_holder, spool_holder, anycubic_i3_Mega_S, stl
7
7.0
Jun 11, 2021
06/21
by
(VAZ_2105)
data
eye 7
favorite 0
comment 0
This design was inspired by a model by jdharris (here: https://www.thingiverse.com/thing:2776254), however I didnt have a spare HDD spindle. I did have 608 bearing so made this instead. It spins very freely and smoothly; FAR better than a regular vertical spool holder (like the stock mega S holder). The bearings I bought from aliexpress are not the best, so they have very slight inner-race play, but it doesnt affect the spin at all. They're also very cheap (10pcs for 2EUR) so its not a problem...
Topics: spool, Anycubic, 608_bearing, 3D_Printer_Parts, spool_holder, anycubic_i3_Mega_S, thingiverse,...
6
6.0
Dec 1, 2021
12/21
by
(VAZ_2105)
data
eye 6
favorite 0
comment 0
This is version 2 of my original spool holder remix which originally used a 608 bearing. After using it for a while, the axle broke and I didnt like how the spool was not exactly held in place. This new version provides a stable fit for the spool, much more durable axle and a steady rotation. This spool holder uses a larger 6002 bearing which allows for a thicker and more durable axle. In addition to this, I designed a spring loaded spool axle which aims to fit internal spool diameters from...
Topics: filament_holder, Anycubic, Anycubic_I3_Mega, spool, 6002, thingiverse, 3D Printer Accessories,...
3
3.0
Apr 28, 2021
04/21
by
Vita Fendrich (Vitalix)
data
eye 3
favorite 0
comment 0
I was not satisfied with the original spool holder, that came with the printer. Some filament spools were too thick to fit to the stock spool holder, so I have designed my own version. Due to minimalise the need of support material the holder is divided into 2 parts that are meant to be glued together. The spool hub is inspired by Prusa's multimaterial spool holders. An aluminium tube is needed for this holder - 8 mm in diameter and 120 mm long.
Topics: thingiverse, filament_spool_holder, artillery_evnovo, stl, 3D Printer Accessories, artillery_genius
9
9.0
Apr 28, 2021
04/21
by
Vladimir Melnikov (wladwm)
data
eye 9
favorite 0
comment 0
This is a spool holder. Spool diameter up to 20cm.
Topics: thingiverse, filament_spool_holder, stl, spool_holder, 3D Printer Accessories
8
8.0
Jan 16, 2021
01/21
by
vincenzo maria (vins_cube)
data
eye 8
favorite 0
comment 0
i did a small clamp for my filaments you tight the clamp on the shield from 0 to 35 mm tickness i used M12 screws lenght 150 mm for knob and 180 mm for support rod the screw 180 mm will have the end knob that i do nex time - sept. 17th; update the clamp, now the clamp is 65 mm to get more stability when tight there is also the knowb for the long screw; file STEP available to develop the parts if someone has time
Topics: filament_spool_holder, filament, clamp_holder, 3D Printer Accessories, stl, thingiverse,...
3
3.0
Mar 31, 2021
03/21
by
Vadym Cherner (vadymch)
data
eye 3
favorite 0
comment 0
Filament role cone x-form with 16 mm ball-bearing. I used 2 ball-bearings, but it is a place for 4 ball-bearings. I am sure, two are enough.
Topics: thingiverse, 3D Printer Parts, filament cone, ball-bearing 16 mm, filament support, filament,...
6
6.0
Mar 4, 2021
03/21
by
Vesa Takomo (Vulcan69)
data
eye 6
favorite 0
comment 0
Hendrik72's spool holder seemed one of the best for me. However not everybody have fidget spinners laying around with those extra 608 bearings. Besides I have always wanted to print bearings and see how they perform. Also I wanted to make width of holders adjustable with threaded locking. Credits for bearings goes to emmet's [gear bearing](https://www.thingiverse.com/thing:53451) Feel free to make for example thinner bearing with customizer if your printing tolerances are too big and you can't...
Topics: spool_holder, spoolholder, spool_mount, 3D Printer Accessories, thingiverse, filament_spool_holder,...
8
8.0
Apr 17, 2021
04/21
by
Vincent (DJlNN)
data
eye 8
favorite 0
comment 0
Important update!!! Don´t use v.2 filament cleaner/guide!!!!! Read down below under update. Hi all, I created a spool holder & cleaner/guide for Creality CR-10. My idea was to create a mount that you could attached horizontal to top of your Creality, so that the filament goes straight down to the extruder. It took some time to print all parts but at last everything fits :). In the files (fig13) you will find a body cap that you can use some 3mm screws for extra support but I did not need...
Topics: filament_spool_holder, 2020_spool_mount, 2020_filament_mount, creality upgrades, thingiverse, stl,...
4
4.0
Mar 22, 2021
03/21
by
Victor Shapovalov (ArtificalSUN)
data
eye 4
favorite 0
comment 0
Want to fix your original Ender / CR-10 spool holder on your table or bookshelf but your wife will kick your arse for drilling holes? Not a problem anymore! This clamp allows you to reliably mount your spool holder on the edge of a table/shelf/whatever thinner than 30 mm. It has 2 sets of holes to screw the original Creality spool holder in 4 different orientations (using original M5 screws right into plastic). And it's perfectly printable in place - no assembly needed (I do understand it...
Topics: stl, clamp, 3D Printer Accessories, Creality, spool_holder, Ender_3, thingiverse, CR-10
5
5.0
Mar 15, 2021
03/21
by
Viktor Dávid (viktordavid)
data
eye 5
favorite 0
comment 0
This Spool Holder is made for an Ikea Lack Enclosure. Compatible spool diameter from 140mm to at least 200mm To assemble, you will need: - 4x Roller - 4x Stift - 2x Holder Frame - 2x Creality - 4x 608 bearing You need to use support only for Holder Frame. If your printer cannot print without overhangs, pls prepare yourself to remove some of it, because the letters are very tight in order to stay there without glue. Every parts can be assembled without tool. Stift infill need to be at least 40%...
Topics: thingiverse, enclosure, filament_holder, ikea_lack, filament_spool_holder, spool_holder, stl, 3D...
4
4.0
Mar 16, 2021
03/21
by
Viktor Dávid (viktordavid)
data
eye 4
favorite 0
comment 0
This Spool Holder is made for an Ikea Lack Enclosure. Compatible spool diameter from 140mm to at least 200mm To assemble, you will need: 4x Roller 4x Stift 2x Holder Frame 2x Creality 4x 608 bearing You need to use support only for Holder Frame. If your printer cannot print without overhangs, pls prepare yourself to remove some of it, because the letters are very tight in order to stay there without glue. Every parts can be assembled without tool. Stift infill need to be at least 40% for others...
Topics: filament spool holder, thingiverse, filament holder, enclosure, ikea lack, spool holder, stl, 3D...
13
13
Jan 13, 2021
01/21
by
Vittorio D'Amato (tenebro)
data
eye 13
favorite 0
comment 0
Card Floss Winding for cross stitch or other type of micro-cord. I have created this item for my girl, she's hobby is cross stitch and she needed it. Print with your prefer filament type. Use Slicer scale function for correct measure 38 x 36 x 0.8 mm
Topics: thingiverse, stl, card floss, spool_holder, cross_stitch, Art Tools
9
9.0
Apr 30, 2021
04/21
by
(VespGareth)
data
eye 9
favorite 0
comment 0
Simple spool holder. Fiddled for DevilDesign filament spools but may fit other. Central hole is for a 25mm diameter rod and outside diameter of spool hole is 51mm.
Topics: stl, spool_holder, filament_spool_holder, Spool, holder, 3D Printer Accessories, thingiverse,...
8
8.0
Jan 15, 2021
01/21
by
Vincent Suen (wssuen)
data
eye 8
favorite 0
comment 0
This is an adaptor for mounting the spool holder I like to my delta Kossel Mini. Standard 2020 frame. So mount the joints with 2020 nuts(M3) and screw (M3). This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0ieT2kjbDn2 Spool holder for profile delta lightweight https://www.thingiverse.com/thing:1904594 Spool Holder Stand https://www.thingiverse.com/thing:1804154
Topics: thingiverse, 3D Printing, stl, holder, delta, delta_3D_printer, spool_holder
3
3.0
Mar 15, 2021
03/21
by
Vincent Ferchaud (HoM3r17)
data
eye 3
favorite 0
comment 0
Le support d'origine est parfait pour moi, j'ai juste fait ce remix pour l'adapter a des vis M4 qui ne rentraient pas dans la version d'origine, et j'en ai profité pour créer des "encoches" pour que la tête de vis ne dépasse plus de la fixation. Simple remix de l'original par Les Frères Poulain https://www.thingiverse.com/thing:4737124
Topics: bobine, derouleur__bobine, thingiverse, filament_spool, spool, support_de_bobine, porte_bobine,...
2
2.0
Aug 8, 2021
08/21
by
Vary generic (aannuat594)
data
eye 2
favorite 0
comment 0
External spool holder/mount for the FlashForge Dreamer (and Dreamer NX) and Dremel 3D20.The clips will fit in any of the vents on the sides or back and holds just about any spool. I only tested 1Kg spools, but it is plenty strong enough for them.
Topics: FlashForge_Dreamer, Dreamer_NX, thingiverse, dremel_3d20, flashforge_dreamer_nx, 3D Printer Parts,...
10
10.0
Jan 19, 2021
01/21
by
Van Morris (VanBot112)
data
eye 10
favorite 0
comment 0
The peg in the spool well is too short to hold these large [1kg spools](http://cdn.shopify.com/s/files/1/0480/1969/products/1Kg-red_1024x1024@2x.JPG). NOTE: This only works with the spools that are [96-97mm wide](http://cdn.shopify.com/s/files/1/0480/1969/products/1Kg-red_1024x1024@2x.JPG). This is not Hatchbox, Esun, Amazon Basics, etc.
Topics: 3D Printer Accessories, thingiverse, spool holder, dremel, stl, 3d45
7
7.0
Jun 11, 2021
06/21
by
(VanBot112)
data
eye 7
favorite 0
comment 0
Summary This is a 3d-printable spool holder that fits Inland, Masterspool, ESUN, Hatchbox, and other similar sized spools with the 54mm diameter hole. Please follow the illustration/instructions in the photos to know how to print the parts. It's repeated in text format in the recommended print settings. This thing needs work. The filament comes off the spool sideways because the PTFE guider tube is pointing towards the front of the machine. Ideally, there'd be an eyelet to pull the filament...
Topics: 3d45, dremel_3d45, Dremel3D45, thingiverse, filament_holder, Spool, filament_spool_holder,...
3
3.0
Oct 15, 2021
10/21
by
Vaidas Balsys (vbalsys)
data
eye 3
favorite 0
comment 0
The main goal of this project was to provide a sealed case with minimal inner volume for filament spool, which could be used during printing or for storage when filament is not being used. Small internal volume will only require small amount of dessicant to keep it dry. Secondary goal was to allow interchangeable ports for filament, hygrometer attachment point. Also possibility to change outlet direction and compatibility with Prusa spool holder. This drybox is designed to hold one spool of...
Topics: filament_spool_holder, thingiverse, filament_guide, 3D_printing, stl, 3D Printer Accessories,...
7
7.0
Apr 20, 2021
04/21
by
Vadym Cherner (vadymch)
data
eye 7
favorite 0
comment 0
As part of the development of the ElVa1 project, support for the filament spool has been modified to version 3. In this version you get the possibility to exactly adjust the distance between ball bearings and less filament is needed to print the parts. The materials bill is listed below and available as an PDF file. Nr. Name Amount Print Part Description 1 axle for bearing 4 print 2 bearing ZZ626 4 3 connector extrusion 20x40x6 1 print 4 Support filament role v.2 2 print 5 support on extrusion...
Topics: 2040_extrusion, thingiverse, filament_holder, 3D Printer Parts, stl, filament, ElVa1, extrusion,...
6
6.0
Mar 2, 2021
03/21
by
Vadym Cherner (vadymch)
data
eye 6
favorite 0
comment 0
It is a filament spool holder. I used the extrusion for support of bearing ZZ626. With this trick I succeeded to save place next to the printer. it was used the pipes with Ø7 mm, sure you can use other diameter, but the construction must be change. You need: screw M6 2 pieces hexagon nut M6 2 pieces bearing ZZ626 4 pieces screw M3 x 6 4 pieces screw M3 x 10 2 pieces pipe Ø7 mm 8 cm 2 pieces pipe Ø7 mm ca. 20.5 cm 1 piece countersunk screw M4 x 10 mm 4 pieces lock nut M4 for your extrusion 4...
Topics: filament spool, thingiverse, filament role, stl, filament_spool_holder, 3D Printer Parts, filament...
7
7.0
Mar 16, 2021
03/21
by
Vadym Cherner (vadymch)
data
eye 7
favorite 0
comment 0
As part of the development of the ElVa1 project, support for the filamentrolle has been modified to version 2. In this version, less filament is needed to print the parts. The materials bill is listed below and available as an Excel file. nr. name amount description 1 axle for bearing 4 for print 2 bearing ZZ626 4 3 filament role 1 4 connector extrusion 20x40x6 1 for print 5 Support filament role v.2 2 for print 6 support on extrusion v.2 1 for print 7 adjusting spring v.2 1 for print 8 axle...
Topics: extrusion connector, filament, 3D Printer Parts, 2040_extrusion, support filament role,...
3
3.0
Jan 8, 2021
01/21
by
valmil Santos (Valmil_Santos)
data
eye 3
favorite 0
comment 0
easy to print and easy to assemble
Topics: stl, bearing, thingiverse, filament, filament_spool_holder, 3D Printer Accessories
6
6.0
Mar 4, 2021
03/21
by
Viktor Lundqvist (vikke_01)
data
eye 6
favorite 0
comment 0
##After a week of testing i have now released a V2 wich has a stronger neck so the adaptor is less prone to snapping.## **There is now a Longer version of the holder for larger spools, this version is not tested.** This is a spool holder that I made so I could use filament from a spool that was too small for the stock spoolholder on my Ender 3. It works great!! even with larger spools (max 1KG, or maximum width of 65mm or with the longer untested version you can use spools ut to 85mm). When...
Topics: stl, Ender_3_Pro, Ender_3, 3D_Printer_Parts, filament_spool_holder, ender_3_upgrade, small,...
3
3.0
Apr 4, 2021
04/21
by
Victor Shapovalov (ArtificalSUN)
data
eye 3
favorite 0
comment 0
Extremely simple modification to extend default Ender 3 spool holder to fit 2 spools. Extender replaces the nut which holds the spool mount and has the same width for a spool.
Topics: thingiverse, 3D Printer Parts, extender, Ender_3, stl, spool_holder
3
3.0
Apr 19, 2021
04/21
by
Valerio Dolci (feyd89)
data
eye 3
favorite 0
comment 0
Universal spool holder for stock Ender 3 spool holder. The 3 spiral arm will adapt and support a great range of spools with different internal diameters. To make it work, you need to print a pair of those and clip in on both sides of the spool, then place the spool on the Ender 3 stock holder.
Topics: thingiverse, filament_holder, stl, 3D Printer Accessories, upgrade, holder, filament_spool_holder,...
3
3.0
Apr 1, 2021
04/21
by
Valentin Lef (ValentinLef)
data
eye 3
favorite 0
comment 0
This is a extensioin spool holder for ender 3, it's the ideal for 2.3kg spool You just need a drill a hole in the original holder at 15mm under the end and place anything that is able to hold the extension
Topics: creality_ender_3, 3D Printing, thingiverse, upgrade, Creality, spool_holder, spool, upgrade_ender3,...
11
11
Jan 18, 2021
01/21
by
Vedran Simunovic (vedransi)
data
eye 11
favorite 0
comment 0
Fabrikator 2 comes with a spool holder for 1kg spools only. Too big if you just want to use smaller spools. This small spool holder is suitable for 250g spools and takes less space.
Topics: Fabrikator_mini_2, filament_spool_holder, 3D Printer Accessories, thingiverse, Fabrikator_Mini_II,...
9
9.0
Apr 27, 2021
04/21
by
Vitalii Gura (hippieua)
data
eye 9
favorite 0
comment 0
This is overkill filament holder designed for heavy spools to be mounted on the shelf. I used: 2 printed Clips 1 Printed Holder 2 6202RS bearings 2 M12 nuts 1 M12x150 bolt 4 screws
Topics: thingiverse, filament_holder, filament_spool_holder, 3D Printer Parts, stl, filament
3
3.0
Apr 2, 2021
04/21
by
Vlad Postolache (Vl4d)
data
eye 3
favorite 0
comment 0
Basic Spool holder. Held in place with a M4 bolt. Designed to be mounted on 25mm wide square tube. Overhangs are fairly aggressive, however lots of surface adhesion area.
Topics: spool, thingiverse, spool_holder, 3D Printer Accessories, filament_spool_holder, stl
9
9.0
Apr 30, 2021
04/21
by
V Lang (DiegoTheWolf)
data
eye 9
favorite 0
comment 0
Since my filamentholder broke down i had to come up with an idea to fix it. This way the spool has enough room to move freely. Distance is 100mm. Clamps have 10mm depth. Thickness 2mm. Two pieces hold my movind spool very well (the rod of the spool is not fixed).
Topics: stl, spool_holder, filament_spool_holder, filament_holder, 3D Printer Accessories, spool,...
4
4.0
Mar 21, 2021
03/21
by
V T (jup2000)
data
eye 4
favorite 0
comment 0
I needed a spool roller that was capable of holding this monster "Texas-style" 5kg spool from Zyltech. Slightly smaller roller for Polymaker's 3kg spools as well. Nothing (that I could find) would fit this beast and do so well so I had to roll my own. Various sizes are included to fit
Topics: spool, zyltech, stl, 3D Printer Accessories, Polymaker, roller, filament_spool_holder,...
4
4.0
Apr 12, 2021
04/21
by
Vadim Ryazanov (isotope)
data
eye 4
favorite 0
comment 0
Have a tripod lying around? Use it for your filament spool! :) Extra hardware required: 1 x 608 Bearing 1 x 6-32 x 1" Machine Screw 1 x 6-32 Nut Works so far with: ColorFabb spools
Topics: thingiverse, 3D Printer Accessories, adapter, mount, stl, filament_spool_holder, Tripod
5
5.0
Mar 18, 2021
03/21
by
Vasily Scherbakov (MrVasily)
data
eye 5
favorite 0
comment 0
RU Модернизированный вариант крепления катушки с филаментом к столу. Диаметр для шпильки М8, диаметр для шурупов 4 мм. EN An upgraded version of the mounting coil with a filament on the table. The diameter for the M8 stud, the diameter for the screws is 4 mm.
Topics: filament_spool_holder, stl, 3D Printer Accessories, thingiverse
