8
8.0
Jun 20, 2021
06/21
by
zoltan bzman (rgbskills)
data
eye 8
favorite 0
comment 0
Before you print! I recommend PLA for this print. Requirements: Acrylic sheets, 32(you can use less) M3 screws longer that 1cm with nuts. Assembly 1 - Once printed position the parts as in the image. 2 - Cut out and from any material a bottom plate and attach it (this is important - it will hold all the parts together) 3 - Place the power supply in its position 4 - Place the mother board in its place and wire it up 5 - You can start attaching the side plates 6 - attach the screen to the...
Topics: tevo_3d_printer, thingiverse, DIY, stl, tevo_tarantula
11
11
Jan 19, 2021
01/21
by
Linus Boreus (Swesen)
data
eye 11
favorite 0
comment 0
This is a test printer all parts are provided AS IS and I may never fix errors I find. Update: Added improved pulley parts and made 5mm pulley shaft versions, should be sturdier than the normal 3mm shaft version. This is a printer I designed from the extra parts I have piled up from upgrading my tevo tarantula. It uses: E3D-v6 (or clone) 2020 extrusions(1 x 380mm and 3 x 150mm) MGN12H rails(2 x 400mm and one 300mm) 2 x Idler pulley for 3mm screw Tevo tarantula parts: MKS base Y carriage 200x200...
Topics: 3D Printers, 3d_printer, tevo_3d_printer, thingiverse, stl
5
5.0
Mar 4, 2021
03/21
by
Alex Mitchell (Alexmit)
data
eye 5
favorite 0
comment 0
I wanted to install my Bigtreetech 8 diode TL-Smoothers inside the stock case of my TLM next to the MKS Sbase board. This allows for a perfect fit for X,Y&,Z smoothers in the left side of the case and it seems to offer plenty of cooling with the fan in the stock postion. I originally designed the slide-in smoother carriers in F360 and glued them to the original bracket. I found that it required a little extra clearance vertically from the fan inside the case, so I remixed the original...
Topics: tl-smoother, 3D Printer Parts, thingiverse, tevo_3d_printer, stl
10
10.0
Apr 30, 2021
04/21
by
3d Printing Guru (bc2801)
data
eye 10
favorite 0
comment 0
this is a remake from an original part from another user in thingeverse i hope you guys like it i made some changes and it works great. thank you guys. here is the video where i talk about this part and other tevo tarantula upgrade parts that im sharing with you guys. https://www.youtube.com/watch?v=FvuQxK82Ksk
Topics: stl, tevo_3d_printer, extruder, tevo, thingiverse, tevo_tarantula, 3D Printing
10
10.0
Jan 18, 2021
01/21
by
Brandt Denkers (BD3DCUSTOMS)
data
eye 10
favorite 0
comment 0
Couldn't find any brackets for this power supply it is marked with s-300-12 they are snug and fit great!
Topics: tevo, 3D Printer Accessories, tevo_3d_printer, thingiverse, tevo_tarantula, stl
9
9.0
May 1, 2021
05/21
by
Chris Dawson (darknz)
data
eye 9
favorite 0
comment 0
This is an offset mount for the Tevo Tarantula, designed to offset the MKS controller to the right and out in front of the X axis motor. My motivation for moving the MKS to the side was so I could attach a decent sized diagonal brace to support the right z axis. Tips if you are a Tarantula owner: To make this fit nicely I took the MKS perspex control box 'case' apart and inserted all the board-support screws from the back. I also remove the split washers from the M4 bolts that originally held...
Topics: stl, tevo_3d_printer, tarantula, tevo, thingiverse, tevo_tarantula, 3D Printing
11
11
Jan 14, 2021
01/21
by
arlo wiersma (XennoNL)
data
eye 11
favorite 0
comment 0
This is an Add on for Ninjacookie's https://www.thingiverse.com/thing:2014187 you can move the motor out of the way and do not need to reverse the settings in the firmware. You just need long M3 bolts and washers.
Topics: tevo, thingiverse, tevo_tarantula, stl, 3D Printer Parts, tevo_3d_printer
9
9.0
Apr 30, 2021
04/21
by
Michał Ch (Xava)
data
eye 9
favorite 0
comment 0
This bracket require to use rail on Y axis. Mount with M4x10 screws and M4 t-nuts.
Topics: stl, tevo_3d_printer, 3D Printer Parts, tevo, thingiverse, tevo_tarantula
9
9.0
Jun 10, 2021
06/21
by
Gulfcoast Robotics (gulfcoast_robotics)
data
eye 9
favorite 0
comment 0
New product release for TEVO Tarantula. This carriage plate will replace TEVO tarantula stock acrylic carriage. Aluminum Y carriage has several benefits compared to acrylic carriage: Brushed, anodized clear aluminum plate 3mm thick. Fully compatible with TEVO Tarantula. Drop-in replacement. Very stiff completely flat, it will provide very good reference surface for leveling heated bed. Here we have it for sale: https://gulfcoast-robotics.com/PYP6 DXF file is available by request
Topics: tarantula, thingiverse, tevo_3d_printer, tevo_tarantula, 3D Printer Accessories, stl
4
4.0
Mar 8, 2021
03/21
by
Ralf Moritz (moclub)
data
eye 4
favorite 0
comment 0
My Tevo Tornado glas heatbed broke, so I needed a replacement. As the regular glas cutting boards from Amazon fits well (30x40) and spelli93 did the job already with his Clips, this was my solution. My mod is based on the idea of the clips, but I designed it new from scratch. I designed corners that fits perfect on the 30x40x0.5 glas cutting board and holds a 31cmx31cm print surface like a FR4 without any metal clips. I also added a cable relief on one corner for the heated cables. Print...
Topics: tevo_tornado, stl, thingiverse, tevo_3d_printer, tevo, 3D Printer Parts
9
9.0
Apr 23, 2021
04/21
by
luis collie (luiscollie)
data
eye 9
favorite 0
comment 0
z motor mount for tevo TARANTULA 3d printer. gives a little more adjustment and support for z motor and printer frame. a little tricky to get the T nuts in... force it....but make a nice solid corner..
Topics: tevo_3d_printer, tevo_tarantula, 3D Printer Parts, tevo, stl, thingiverse
11
11
Mar 12, 2021
03/21
by
Black Talon (BlackTalon)
data
eye 11
favorite 0
comment 0
This is a modular carriage adapter for use with http://www.thingiverse.com/thing:1839201 and http://www.thingiverse.com/thing:2051895. This adapter fits the modular carriage and allows for a close attachment of the hexagon hot end and fan shroud to the carriage.
Topics: 3D Printer Parts, thingiverse, tevo_3d_printer, tevo, stl, tevo_tarantula
10
10.0
Mar 18, 2021
03/21
by
Bruce Walker (bdwalker1)
data
eye 10
favorite 0
comment 0
Mount for Z end stop on Tevo Black Widow printer that allows for manual fine tuning of physical Z-offset. Materials I used: Parts for mounting sensor to sled: - M3x10 screw - M3 washer - M3 nut Parts for adjustment mechanism - M3x25 screw - M3 locknut (The locknut serves to keep the screw from free spinning when the adjustment nut is turned.) - 8mm section of silicone tubing (a spring would work here as well) - M3 washer - M3 thumb screw nut Parts for attaching mount to printer: - M4x8 screw...
Topics: tevo_black_widow, tevo_3d_printer, 3D Printer Parts, stl, thingiverse
11
11
Apr 27, 2021
04/21
by
Justin (LukeDuke01)
data
eye 11
favorite 0
comment 0
I remixed this to allow for installation after printer was put together. It takes 4mm x.7x10mm bolt and t-nut. Testing needed, I edited this after printing mine as I had to trim some on clip. hopefully all good now let me know.
Topics: thingiverse, tevo_3d_printer, 3D Printer Parts, stl, tevo_tarantula, tevo
10
10.0
Jun 10, 2021
06/21
by
3d Printing Guru (bc2801)
data
eye 10
favorite 0
comment 0
This is a great design by another designer i wish i could take credit for this but im lucky just to have this file and been able to share this great work is a privilege. hope this file is been share responsibly and the actual designer gets the credit. awesome work.
Topics: 3D Printer Parts, thingiverse, tevo_3d_printer, tevo_tarantula, stl
9
9.0
Apr 28, 2021
04/21
by
Wayne McTighe (iMakebyDesign)
data
eye 9
favorite 0
comment 0
Tevo Dual Y Axis Linear Rod, was going to use Linear Rail but decided on Rod as its cheaper & in keeping with the printer’s great prints at a great price mantra, like any toy you can spend & spend $$$, & I wanted to print as much as possible, the "Y" belt has pretension-er, This was Inspired by Dado Hajdarevic Design. All pieces were printed at 0.2mm Layer Height, 50% fill, No support, Although you can use 10% fill for the 5mm belt adjusting nut & drilling Template,...
Topics: 3D Printers, thingiverse, tevo_3d_printer, stl, tevo_tarantula, tevo
9
9.0
Jan 14, 2021
01/21
by
Inan Lyuvman (Inan94)
data
eye 9
favorite 0
comment 0
For stabilizing Z axis.
Topics: tevo, thingiverse, tevo_tarantula, stl, 3D Printer Parts, tevo_3d_printer
9
9.0
Apr 30, 2021
04/21
by
Steven Baird (sj_baird)
data
eye 9
favorite 0
comment 0
Version V3.0 is in progress here. http://www.thingiverse.com/thing:2060650 I designed this to be a template for cutting a 1/8th inch (3mm) aluminum sheet. It could be printed as well . I will create a duct for the single fan model when I have fabricated the carriage. If the cooling is sufficient I mostly not design a duct for the rear. As you can see its not as bulky as it looks, and compared to my current setup with a 70mm fan blocking my view this looks a lot neater. (update 12/17/2016) Added...
Topics: stl, tevo_3d_printer, 3D Printer Parts, tevo, thingiverse, tevo_tarantula
9
9.0
Apr 17, 2021
04/21
by
David.skipworth@ymail.com Skipworth (Roadkillsquad)
data
eye 9
favorite 0
comment 0
A little sign you can mount in the top rail of your Tevo Tarantula, from the movie The Belko Experiment.
Topics: tevo_tarantula, movie, tevo, thingiverse, Decor, stl, sign, tevo_3d_printer
5
5.0
Mar 4, 2021
03/21
by
(allfleet)
data
eye 5
favorite 0
comment 0
A larger control knob for the Tevo Tornado V3 Updated to take 3/4 Avery stickers
Topics: tevo, 3D Printer Parts, thingiverse, tevo_3d_printer, tevo_tornado, stl
9
9.0
Apr 30, 2021
04/21
by
Heiko Schultz (PredatorJr)
data
eye 9
favorite 0
comment 0
replacement to the original bracket that is delivered to mount the sensor on the dual extruder. build a full surface to the extruder and put two M3 nuts in there. 2nd version allows a up to 2mm lower position of the sensor. print in PLA is possible, but use more temperature resistend material if you print longer sessions with ABS / HIPS
Topics: stl, tevo_3d_printer, 3D Printer Parts, tevo, thingiverse, tevo_tarantula
9
9.0
Apr 27, 2021
04/21
by
Colin Doughty Doughty (colindo)
data
eye 9
favorite 0
comment 0
The fan duct consists of a left and a right side and are screwed together when mounting the 40 x 40 motor. It is better to print the left side and then right side, you will have to mirror the file to get the right side. Print upside down with the motor side to the table. See Cura attachment. The duct is attached to the hot end mounting bracket, using two existing screws holding the hot end. I turned the hot end so the element and wires are at the back, leaving room for the cables to clear the...
Topics: thingiverse, tevo_3d_printer, 3D Printer Parts, stl, tevo_tarantula, tevo
11
11
Apr 30, 2021
04/21
by
Miguel S (migey)
data
eye 11
favorite 0
comment 0
This is a remix of the "RepRap Discount Case". The original was specifically for the Prusa i3 frame. I updated the base to it could be screwed down. This should work on most RepRap LCDs. Worked perfect for my Tevo Tarantula LCD Original: http://www.thingiverse.com/thing:905368
Topics: stl, tevo_3d_printer, 3D Printer Accessories, tevo_tarantula, thingiverse
9
9.0
Apr 28, 2021
04/21
by
Wayne McTighe (iMakebyDesign)
data
eye 9
favorite 0
comment 0
“Z” Axis upgrade for Tevo / Tarantula, I had problem with Z Banding & as it was all at the same points in my prints I designed this “Z” axis Upgrade. The weight of the “X” carriage now sits on a bearing above the standard coupler, There is a washer between the Coupler & the Bearing, The centre of the “Z” rod or plate is around 100mm from the right hand side edge to balance out the weight of the stepper motors. You will need a 1 x 608zz bearing ( 8mmx22mmx7m). Printed at...
Topics: thingiverse, tevo_3d_printer, stl, tevo_tarantula, 3D Printing, tevo
11
11
Jan 9, 2021
01/21
by
Johan van Niekerk (kimb0)
data
eye 11
favorite 0
comment 0
I really like the fang duck but needed a 18mm probe mount on it. I is very rough but it works. Just remember to print with supports under the mount. The duct uses a 40mm fan, i just have a 40mm to 60mm adapter on in the photo. The probe i use is the THGS LJC18A3-H-Z/BX
Topics: thingiverse, tevo_tarantula, stl, 3D Printer Parts, tevo_3d_printer
10
10.0
Mar 12, 2021
03/21
by
Stefano Schito (moschito)
data
eye 10
favorite 0
comment 0
A container to be mounted to the base of TEVO printers to hide the wires.
Topics: 3D Printer Accessories, thingiverse, tevo_3d_printer, tevo, container, stl, tevo_tarantula
4
4.0
Jun 21, 2021
06/21
by
ike mor (LighthousePrinting)
data
eye 4
favorite 0
comment 0
couldnt find this type of spool holder any ware so i made one just slide into ur rail and you are good
Topics: tevo_3d_printer, thingiverse, CR-10, stl, 3D Printer Parts, Ender_3
10
10.0
Jan 18, 2021
01/21
by
david fessler (huntman312)
data
eye 10
favorite 0
comment 0
This took me three revisions till it fit my needs. i have included my SketchUp file so you can alter it to fit your needs. fits on 20x20 mm aluminum extrusion. ***MAKE SURE TO MIRROR THE SECOND ONE*** This design was inspire by thingiverse user BOERE, if you need just the lcd mount please visit their page. https://www.thingiverse.com/thing:2144723
Topics: 3D Printer Accessories, LCD_Mount, tevo_3d_printer, thingiverse, tevo_tarantula, stl
6
6.0
Jan 19, 2021
01/21
by
Valentine M... (vamone)
data
eye 6
favorite 0
comment 0
Z-Axis Nut for Tevo Tarantula
Topics: 3D Printer Parts, Z-Axis, tevo_3d_printer, thingiverse, tevo_tarantula, stl
4
4.0
Mar 8, 2021
03/21
by
Demitry Kraskov (Demitryk)
data
eye 4
favorite 0
comment 0
Tevo Tornado Frame Supports. Used a 18 mm hollow pipe from Lowes for $3. Fusion 360 files included for screw hole adjustment and pipe diameter. I don't remember the length of the of pipe I cut. I glued the pipe into the ends. I left space for washers between the rod ends and the brackets.
Topics: tevo_tornado, stl, thingiverse, tevo_3d_printer, tevo_upgrade, 3D Printer Parts
4
4.0
Mar 8, 2021
03/21
by
Demitry Kraskov (Demitryk)
data
eye 4
favorite 0
comment 0
The bracket is to provide support for the Tevo Tornado's Y motor mount it prevents it from bending during movements. Fusion 360 file is included for tweeking if needed.
Topics: tevo_tornado, stl, thingiverse, tevo_3d_printer, tevo_upgrade, 3D Printer Parts
8
8.0
Jan 21, 2021
01/21
by
Nico (eponra)
data
eye 8
favorite 0
comment 0
I just remixed this, because the parts where 5mm high on the bed, and that leads to my fanduct scraping over it, as the ikea mirror is only 3mm in height. So the new holders are all only 3mm in height (on top of the build plate). Also i included a version without the strain relief bracket, just if you have another strain relief mounted (like i have). Happy printing! All credits go to @XapaPrime!
Topics: 3D Printer Parts, tevo_3d_printer, thingiverse, tevo_tornado, IKEA_Hack, stl
9
9.0
Apr 28, 2021
04/21
by
Bol Bot (bolbot)
data
eye 9
favorite 0
comment 0
fixed with one plastic screw from the read and some double face tape https://www.youtube.com/watch?v=oqPBpaE56Ns https://www.youtube.com/watch?v=3WijTyj0rX4
Topics: thingiverse, tevo_3d_printer, tevo_black_widow, stl, 3D Printer Accessories, tevo
9
9.0
Mar 10, 2021
03/21
by
Doug Calvert (13DjjC13)
data
eye 9
favorite 0
comment 0
Spool: I used Ø0.500 aluminium tube, with a washer and plastic tube cap in order to create the spool holder. Head: Head upgrade to enable the use of a bowden tube to feed filament. No Support Needed! Once printed snap off 3 small towers to have your finished part. Guide: Bowden fitting mount to mount to the side of the upright C-channel. Knob: M5 socket head cap screw extended thumb screw. Switch: Small toggle switch mount to fit lighting switch on gantry. Offset: 20mm extruder spacer with...
Topics: tevo_black_widow, stl, thingiverse, tevo_3d_printer, tevo, 3D Printer Parts
9
9.0
Apr 28, 2021
04/21
by
Ville Tapani (Wikke81)
data
eye 9
favorite 0
comment 0
Z-Mount for Tevo Tarantula
Topics: thingiverse, tevo_3d_printer, 3D Printer Parts, stl, tarantula, tevo_tarantula, tevo
9
9.0
Jan 12, 2021
01/21
by
JiltedGeek (JiltedGeek)
data
eye 9
favorite 0
comment 0
Made both fan ducts using http://www.thingiverse.com/thing:1591912 by sobezuki, published May 27, 2016 And the 30-40 version I also used http://www.thingiverse.com/thing:1759396 by Galane, published Sep 8, 2016 I added an 18mm inductive sensor holder as an upgrade Print both in ABS, because it is very close to the hot end and PLA will melt! OFFSET SENSOR: Y offset = 0 X offset = 40 Z offset = up to you ;) Adjust Marlin firmware configuration.h (approx. line 604-605) define...
Topics: tevo, thingiverse, 3D Printing, tevo_tarantula, tevo_upgrade, stl, tevo_3d_printer
9
9.0
Apr 23, 2021
04/21
by
luis collie (luiscollie)
data
eye 9
favorite 0
comment 0
tevo bed cooling fan duct ... used 30 mm fan and bolts over existing extruder fan..
Topics: tevo_3d_printer, tevo_tarantula, 3D Printer Parts, tevo, stl, thingiverse
9
9.0
Apr 24, 2021
04/21
by
Bruce Walker (bdwalker1)
data
eye 9
favorite 0
comment 0
These mounts are for the x-axis motor and idler pulley mounts for the Tevo Tarantula 3D printer. These can be used in conjunction with the Tarantula's stock z-axis carriages or with custom z-axis carriages that do not incorporate mounts for the x-axis motor and pulleys. There are two versions of the motor mount. One incorporates a lower appendage that can be used as an adjustable trigger for a z-min end stop. There is a place to embed a M3 lock nut in the bottom, and then you would use a long...
Topics: tevo_3d_printer, tevo_tarantula, 3D Printer Parts, tevo, stl, thingiverse
9
9.0
Jan 16, 2021
01/21
by
silas pfennig (silas0504)
data
eye 9
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:1241118 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1241118 tevo tarantula 0.3 mm o.4 mm nozel
Topics: tevo, customized, tevo_3d_printer, thingiverse, Math Art, tevo_tarantula, stl
9
9.0
Apr 27, 2021
04/21
by
Colin Doughty Doughty (colindo)
data
eye 9
favorite 0
comment 0
This is my best mod yet. It takes the load off the motor coupler, and as a result, a more accurate printer and no need for a second lead screw. It consists of a 608 2Z bearing inserted in to the bearing holder with an 8mm washer between the bearing and the bush. The bush has two M4 grub screws (left over from the build) locking the bush on to the lead screw. How to instal. The lead screw is a bit undersize and the bearing is able to slide up and down quite easily. So part of the lead screw goes...
Topics: thingiverse, tevo_3d_printer, 3D Printer Parts, stl, tevo_tarantula, Tevo
11
11
Apr 17, 2021
04/21
by
Stephen Vaughan (Orlandoorange)
data
eye 11
favorite 0
comment 0
Push fit covers for the Tevo Tornado control box to cover the contrast, buzzer, switch and USB port, got a bit bored of looking at the empty spaces. Can be removed easily if you have finger nails. I printed with a 0.4 layer as it leaves ridges which grip the metal box cutouts.
Topics: tevo, tevo_tornado, 3D Printer Parts, thingiverse, stl, tevo_3d_printer
4
4.0
Apr 27, 2021
04/21
by
Marko Malekin (Kingner)
data
eye 4
favorite 0
comment 0
Endschalter Abdeckung für Auto-OFF Switch This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/2EOdFELSP55
Topics: thingiverse, tevo_3d_printer, microswitch, tevo_upgrade, stl, 3D Printing, abdeckung
6
6.0
Jan 20, 2021
01/21
by
Hastla La-Vista (hastla)
data
eye 6
favorite 0
comment 0
I liked the design and found same time logo endcaps for the Tevo Tornado - changed hole to fit that caps :) https://www.thingiverse.com/thing:2907866 29.06.2018 - added new version with hole for M8 rod & using part with 608 bearing of the "Parametric universal spool holder" by rowokii: http://www.thingiverse.com/thing:767317
Topics: 3D Printer Parts, tevo, tevo_3d_printer, thingiverse, tornado, tevo_tornado, stl
9
9.0
Mar 12, 2021
03/21
by
George Clark (gclark82)
data
eye 9
favorite 0
comment 0
Just some spring guides for your heated bed. These can also be used along with my cable chain for the heated bed located here: http://www.thingiverse.com/thing:2066559
Topics: 3D Printer Accessories, thingiverse, Spring_guide, tevo_3d_printer, stl, tevo_tarantula
9
9.0
Jan 16, 2021
01/21
by
Louis Castillo (Helifreak1960)
data
eye 9
favorite 0
comment 0
Belt tension device. Drilling holes on existing brackets required, Location of hole in pictures. Bolt hole need to be tapped for 1/4-20" or equivalent metric screw. The bolt hole need to be sized for proper tapping drill inch/metric. 2 3 mm X 35 mm bolts and lock nuts required. USE: Loosen 3 bolts on each side of brackets with slight snugness, Turn 1/4-20 bolt to adjust belt tension, Tighten bracket back up.
Topics: 3D Printer Parts, Belt_Tensioner, tevo_3d_printer, thingiverse, tevo_tarantula, stl
9
9.0
Jan 10, 2021
01/21
by
robert maynard (dragonfire81m)
data
eye 9
favorite 0
comment 0
made this to hold a 9" x 9" 3/16 glass bed. https://www.mcmaster.com/#8476k19/=16tc5zt
Topics: tevo, thingiverse, tevo_tarantula, stl, 3D Printer Accessories, tevo_3d_printer
10
10.0
Apr 30, 2021
04/21
by
Roman Splawinski (RomanStefan)
data
eye 10
favorite 0
comment 0
Dimensions reminiscent of the stock standard Tevo Tarantula y or z axis limit switch mount/bracket. Z axis stock acrylic bracket inexplicably cracked while tightening it back on. (HFF). I have other things in the way preventing the use of some of the other custom stops on Thingiverse (and had a bracket melted back together with a cigarrette lighter to hold up while it printed).
Topics: stl, tevo_3d_printer, 3D Printer Parts, tevo, thingiverse, tevo_tarantula
10
10.0
Mar 10, 2021
03/21
by
Isaac Fankhauser (isaacfank)
data
eye 10
favorite 0
comment 0
These are various sensor mounts for the my modular x carriage for the Tevo Tarantula. The aluminum parts can be purchased from my site www.fankhauser.me Posting them here so people can remix and customize their own. EDIT: 12/21/2017: Opened up the rigid side holes because i was dumb and made them slightly too small to move freely. EDIT: 2/7/2017: Added a remixed layer fan that adds clearance. You still need to go to that design and download the part that directs the air. EDIT(Jan 10 2017): New...
Topics: stl, thingiverse, tevo_3d_printer, tevo_tarantula, tevo, 3D Printer Parts
9
9.0
Apr 30, 2021
04/21
by
Mark Beacroft (rc_mrk)
data
eye 9
favorite 0
comment 0
A replacement carriage for the Tevo Tarantula stock X-Carriage, with built in X belt tensioner, dual fan mounts for 5015 blower fans, and auto level sensor mounts. I designed this x-carriage to replace the stock acrylic one after it became soft and warped during a high temperature print in an enclosure. It is the same dimensions as the stock carriage, but has an inbuilt belt tensioner, supports both the stock hot end and the e3d v6, has mountings for dual fan ducts, and auto level sensor. I've...
Topics: stl, tevo_3d_printer, 3D Printer Parts, tevo, thingiverse, tevo_tarantula
11
11
Apr 30, 2021
04/21
by
Black Talon (BlackTalon)
data
eye 11
favorite 0
comment 0
This is a Fan shroud for the Tevo Tarantula. This is designed to fit a hexagon all metal hot end. This works with the 20x40 Modular Carriage http://www.thingiverse.com/thing:1839201 Note there is a small triangular piece I have also designed to fit the modular carriage to get it in closer to the carriage. Look it up in my things. This design uses a 40mm fan to cool the heat break and the model being printed by splitting the air to both locations. This design was inspired by LPA Fan ducts for...
Topics: stl, tevo_3d_printer, 3D Printer Parts, tevo, thingiverse, tevo_tarantula
