3
3.0
Jan 5, 2021
01/21
by
Diego Saldaña (Diogo921)
data
eye 3
favorite 0
comment 0
i needed for my desk, in order to control thing that i dont move. i hope you can find some use
Topics: stl, switch, Office, thingiverse, underdesk
2
2.0
Oct 26, 2021
10/21
by
Dmytro Strelnikov (dstrelnikov)
data
eye 2
favorite 0
comment 0
Simple underdesk mounting braces for Topping E30/L30. You will need to print 4 of `topping_mounting_side.stl` for mounting either E30 or L30, and you will need to print in addition 2 of `topping_mounting_middle.stl` if you are going to mount both E30 and L30 side-by-side.
Topics: organization, mount, mounting, stl, thingiverse, underdesk, Organization, audio
4
4.0
Jan 19, 2022
01/22
by
DJ Mac (DJMac)
data
eye 4
favorite 0
comment 0
I spent some time trying to find a desktop cup holder that would free up my desktop space and avoid the risk of my beverages tipping over onto a keyboard, or worse. I didn't find any I liked, so I designed my own. Please note as part of your installation plans that the cup holder part inserts from behind, not from the front, to allow the stopper mechanism to exist, so you'll need to leave enough room for that. Design Notes: This design went through about 9 iterations before I came upon the...
Topics: Organization, thingiverse, sliding, underdesk, desktop cup holder, cup holder, stl
6
6.0
May 1, 2021
05/21
by
Diego Bellagamba (diegobellagamba)
data
eye 6
favorite 0
comment 0
This is a round shape cable holder that can be fixed under your desk with only 1 screw. As shown in the photo, taking advantage of the elasticity of the material, the slot opens to let the cables pass, then closes by itself to prevent them from coming out. It can be printed in PLA or a similar material in elasticity, but it must be printed by placing the cylindrical section on the print bed, to prevent it from breaking during the use described above.
Topics: stl, cable_clip, cable_holder, underdesk, cable_guide, Desk_organizer, cable_management,...
4
4.0
Jan 5, 2021
01/21
by
Dan blank (dsorgio)
data
eye 4
favorite 0
comment 0
This is my first design ! I have not printed it yet and do not know how strong it is. I recommend to print in PETG for extra strength. This was made to hold my MacBook Pro under my desk while not in use. It will accommodate any MacBook or other laptop that is 28mm or less in total thickness. There is 2 files one for Right side and one for Left side. Print with the writing facing the build plate. The bottom holes were made to accommodate a standard 7mm screw driver bits, and the top holes are...
Topics: laptop, cool, stl, Computer, holder, mount, macbook_pro, wall_mount, laptop_stand, Mac, desk,...
5
5.0
Jul 3, 2021
07/21
by
Daniel Andersen (DanAndersen)
data
eye 5
favorite 0
comment 0
Having a height-adjustable desk, I wanted to have my computer mounted under the desk. There is a relatively cheap pc tower under desk mount which are basically all the same Chinese manufactured holder. Often they are called "cpu holder" (why ever ...) Check out https://www.amazon.com/Under-Desk-Mount-Bracket-Wall-Mountable/dp/B01M4P7EXU for such a model. These holders can only hold cases up to 18 cm size. This extension allows tower cases to hold up to 26 cm wide tower cases, like my...
Topics: bequiet, case_mount, Computer_Accessories, STEP, Computer_mount, fusion360, holder, desk,...
