2
2.0
Jan 7, 2021
01/21
by
(GoToTheWall)
data
eye 2
favorite 0
comment 0
A small 7"x7" drawer to go under your desk, 1.5" deep. To assemble, bend the runners apart slightly to fit the trapezoid shaped stoppers on the drawer into the groove and hold together while you screw in the drawer. I used masking tape to hold everything in place while I installed it in. If you've got everything together correctly after installation the drawer should slide smoothly out and stop itself from completely sliding out of the runners.
Topics: Organization, drawer, stl, drawers, mini_drawers, Drawer_Dividers, desk, thingiverse, underdesk
1
1.0
Dec 14, 2021
12/21
by
(Iron_Harrier)
data
eye 1
favorite 0
comment 0
A simple mount to hold AC adapters since they don't fit in server rack cable organizers. I designed to be screwed into the bottom of a desk. Should fit a variety of adapters.
Topics: cable_management, Organization, stl, thingiverse, cablemanagement, AC_adapter, underdesk
5
5.0
Jun 11, 2021
06/21
by
(KaeVeeDesign)
data
eye 5
favorite 0
comment 0
Summary Keep your desk clear and your controller at the ready! My Under-Desk Xbox One Controller Holder stores your device in a practical yet aesthetically pleasing manner. I have also used this to store a Steam Controller to great success. I have used 3M command strips to hold this to the underside of my desk. I imagine any sufficiently strong double sided tape would also work. When printed as shown in the slicing picture there is no need for support material. I use 40% infill, finished weight...
Topics: Controller-Holder, Under-Desk, Mount, Desk, Under, Holder, Clutter, Controller, thingiverse, One,...
2
2.0
Jan 18, 2022
01/22
by
(VoidKiwi)
data
eye 2
favorite 0
comment 0
Modified the Design from antibimmer to work better for my needs. HOWEVER as cool and proud of myself as I am for this design. ONLY USE THIS DESIGN IF YOU WANT MINIMALISM. I say this because while uploading my remixed design I found a model which works for my needs a million times better than the one that I just printed. That design can be found below. Better design: https://www.thingiverse.com/thing:4835494
Topics: thingiverse, underdesk, Tool Holders & Boxes, soundblaster_g6, dac, stl
2
2.0
Oct 14, 2021
10/21
by
(kaleun96)
data
eye 2
favorite 0
comment 0
Under-desk mount for a Schiit stack with Introprose connectors. Tested on a Schiit Modi 3+ and a Schiit Magni Heresy, unsure if other or older versions work. Very stable when assembled, virtually no side-to-side movement and if the correct rubber feet are used in the top of the mount to push against the Magni there is no up-or-down movement of the stack inside the mount. Important to note that this is made for the Schiit Stack with the [Introprose RCA...
Topics: thingiverse, desk, underdesk, stl, mount, schiit_stack, Audio, Schiit_Modi, schiit_magni, schiit
1
1.0
Jan 18, 2022
01/22
by
(popatachi)
data
eye 1
favorite 0
comment 0
This is an underdesk mount for a Ugreen 4-1 card reader. I only use the micro and SD card slots, so didn't design an opening for the other side. https://www.ugreen.com/products/4-in-1-usb-3-0-sd-tf-card-reader
Topics: ugreen, thingiverse, underdesk, mount, Other, stl
3
3.0
Jul 22, 2021
07/21
by
AM 3DP (CorValidum)
data
eye 3
favorite 0
comment 0
I designed this to be able to have my Desk Lamp from Ikea under my, well, desk...
Topics: Office, holder, ikea, stl, desk_lamp, thingiverse, underdesk, ikea_harte
6
6.0
Jan 21, 2021
01/21
by
Aaron Havens (arnmac)
data
eye 6
favorite 0
comment 0
I have seem people with designs for an under desk headphone holder. I decided to design my own in Fusion360. This works best if printed on its side. Attach to the undersid of a desk or table using command strips or doublesided type.
Topics: Tool Holders & Boxes, underdesk, thingiverse, stl, headphones
2
2.0
Jan 19, 2022
01/22
by
Adam Downes (z0mbiew0mbat)
data
eye 2
favorite 0
comment 0
Remix of the excellent drawers by chimeranzl; When I printed the first one of these I found occasionally I'd pull it a bit too far and it would come all the way out, this slide (v2 3M strip slide) and lock remix allows the drawer to be put onto the slide and then the locks clipped onto the frame to prevent the drawer from being pulled out accidently.
Topics: tray, desk drawer, small parts stoarge, under desk, thingiverse, household, Stoarge Gox, office...
2
2.0
Jan 5, 2021
01/21
by
Adam Rain (blackhawk0258)
data
eye 2
favorite 0
comment 0
This is an Underdesk Pencil holder with rails on the sides that allow you to connect multiple together. I originally designed this to be printed normally but found that vase mode works really well. I printed 4, connected them together then stuck them to the underside of my wife's desk using 3M mounting tape.
Topics: Organization, stl, pencil_holder, pen_holder, modular, thingiverse, underdesk, vase_mode
0
0.0
Apr 19, 2022
04/22
by
Adnan Nash (adnanklink)
data
eye 0
favorite 0
comment 0
Simple headphone holder to screw into your desk. Holes are ANSI#8 sized though you want smaller screws so that you arent threading into the mount.
Topics: thingiverse, headphone_hanger, 3D Printing, screws, stl, underdesk, headphones
2
2.0
Jan 18, 2022
01/22
by
Adrian Frühwirth (afkadri)
data
eye 2
favorite 0
comment 0
I optimized the Xbox controller underdesk holder. Now its very easy to put out the controller. The best way to print is that the holes where the controller sticks come in facing upwards because with this way you don't need support!
Topics: holder, Xbox_one_controller, optimized, thingiverse, underdesk, Video Games, controller, xbox,...
3
3.0
Apr 2, 2021
04/21
by
Alexandre Zorzi (Gourdinos)
data
eye 3
favorite 0
comment 0
Underdesk xbox one elite controller mount fixed with double sided tape. I needed a mount that support wired controller, with enough clearance for the paddles and attach under the desk, so here is what I came up with !
Topics: mount, underdesk, video_game, Xbox_one_controller, Video Games, thingiverse, controller,...
3
3.0
Mar 15, 2021
03/21
by
Andre Neyer (Speckbaer01)
data
eye 3
favorite 0
comment 0
Das ist eine Halterung für ein 5er Hub/Switch mit den Maßen 10x10 cm. So kann man das Hub einfach unter den Tisch schrauben.
Topics: Untertisch, thingiverse, Computer, Halterung Untertisch, mount, switch, hub, stl, Halterung,...
1
1.0
Nov 8, 2021
11/21
by
Andreas Giesert (Andreas-Giesert)
data
eye 1
favorite 0
comment 0
Here it is: my design of an underdesk headphone hook: - only 2 parts and easy to print - very sturdy because all layers lay in the force directions - assembly without glue (I recommend assembling after screwing the hook to the desk) - mounting with 2 screws (50 mm apart)
Topics: under desk, Microphone, headphones_hook, headset_hook, under-desk, headphones, Headset_Hanger,...
3
3.0
Jul 22, 2021
07/21
by
Andrew Butcher (Butcher9_9)
data
eye 3
favorite 0
comment 0
A Simple Bracket to Mount a PS4 controller under a desk. Designed for a work colleague and I have not tested the Fitment yet, Will update as required. 3 Screw holes , 4mm hole. Fusion Files included for anyone that wants to modify it.
Topics: Video Games, gaming, stl, desk, controller, thingiverse, underdesk, mount
1
1.0
Aug 8, 2021
08/21
by
Andrew Meyer (miremaker)
data
eye 1
favorite 0
comment 0
I remixed this bracket: https://www.thingiverse.com/thing:835356 I felt like the original works great for mounting on the side, but mine has to hang from under my desk. I wanted 2 holes for attachment (to prevent spinning). I also included the model with the single hole. If you are going into a wooden/composite desk, check the screw depth you might need first before touching a drill. I needed 3/4" screws for mine. I also beefed up the corners in a few areas to give it more strength on the...
Topics: desk_cable_tidy, tidy, underdesk, thingiverse, office_organization, desk_tidy, cable_tidy, office,...
2
2.0
Jan 19, 2022
01/22
by
Argent Cove (argentcove)
data
eye 2
favorite 0
comment 0
This is a sheath for the metal mount of an under desk keyboard tray. FEL8017801 - Fellowes Designer Suites Compact Keyboard Tray https://www.amazon.com/gp/product/B00439564O/ 2 of these parts fit on the metal sides before sliding the tray in to it's track. They prevent metal-on-metal.
Topics: desk, under, thingiverse, underdesk, mount, keyboard, Office, stl, Keyboard_tray
1
1.0
Sep 13, 2021
09/21
by
BRANDON BOWMAN (BRANDONMBOWMAN)
data
eye 1
favorite 0
comment 0
a little under desk drawer, print flat don't forget supports like I did!
Topics: stl, thingiverse, drawer, desk, Desk_organizer, Tool Holders & Boxes, underdesk
8
8.0
Apr 28, 2021
04/21
by
Brandon Vargas (dukeofhentai)
data
eye 8
favorite 0
comment 0
A simple headphone hanger for under your desk. Just add a command strip or double side tape and works. My first model made.
Topics: thingiverse, desk, headphone_holder, stl, underdesk, headphones, Audio
1
1.0
Nov 30, 2021
11/21
by
Bülent Uğur (ugurbu)
data
eye 1
favorite 0
comment 0
I designed spool hanger and cover in Tinkercad and used customizer file to get my drawers for my empty spool drawer (Porima). Thanks to customizer file! You need also need 4 quantity of about 9-10 cm bolt and nuts to fix drawers to spool. You need to open holes on spool (180 degree) to 2 screws (about 2cm screws) the spool holder and cover parts together to prevent drop down under the table. 1. fix the hanger under the table first. 2.prepare drawers and fix on spool (not forget the holes before...
Topics: spool, Underdesk_drawer, thingiverse, spool_drawer, filament_spool, stl, Underdesk_spinning,...
3
3.0
Aug 22, 2021
08/21
by
Carlo Barraco (TheGomba)
data
eye 3
favorite 0
comment 0
After several USB hubs, I finally found one that works the way I want it: the [TP-Link UH720](https://www.tp-link.com/ca/home-networking/computer-accessory/uh720/). I designed an under desk mount for the UH720 for better cable management under my new desk and decided to share it. The mount provides access to all the ports and the power button. Note that its a pretty snug fit, but will slide in if enough force is applied at the right angle. The mount is designed for countersunk M3 wood screws....
Topics: under_desk_mount, UH720, TP-Link_UH720, USB_hub_mount, USB_hub_holder, usb_hub, under_desk,...
7
7.0
Apr 30, 2021
04/21
by
Chase Cobb (Chase_C)
data
eye 7
favorite 0
comment 0
This is a simple design for a PS4 Pro console underdesk mount. These mounts are a very tight fit, which makes me more comfortable. :) Just print off four of these and use two on the left and right sides. I mounted mine with only 3, but 4 is certainly more secure.
Topics: stl, organization, ps4, underdesk, pro, mount, playstation, Video Games, thingiverse
3
3.0
Mar 15, 2021
03/21
by
Chris Almaguer (pchanizzle)
data
eye 3
favorite 0
comment 0
I found this on PrusaPrinters site made by /u/good_pencil on reddit. I remixed it to have no holes in case you wanted to use command strips rather than drill/screw, but I included the original with screw holes. https://youtu.be/zGy-2ZDdXq8
Topics: thingiverse, cable_clip, organization, Desk_organizer, cord, cable_holder, stl, Organization,...
2
2.0
Jun 20, 2021
06/21
by
Chris Brannan (Ultimatum)
data
eye 2
favorite 0
comment 0
This is a remote holder for the small remotes what come with pretty much all LED RGB strip lights. The print is pretty straight forward, just print on its back, most printers will handle the wall with ease. It might be stiff at first use, but if you mount it to under your desk with double sided tape, give it a few runs in and out then the PLA will flex create a smooth running fit.
Topics: remote_holder, thingiverse, Tool Holders & Boxes, Led_Holder, stl, underdesk, led_strip
1
1.0
Jan 18, 2022
01/22
by
Chris DeWolf (Ferfed)
data
eye 1
favorite 0
comment 0
USB mount for a few USB extension cables. made for these: https://www.amazon.com/gp/product/B073F84X43
Topics: usb_cable, thingiverse, underdesk, usb, mount, Office, Desk_organizer, stl, desk
2
2.0
Jun 10, 2021
06/21
by
Christian Pixner (pixi2012)
data
eye 2
favorite 0
comment 0
Glashalter für Stielgläser. Vorne leicht angeschrägt damit sie auch nicht von alleine rausfallen können
Topics: Organization, glass, underbuild, underdesk, wandhalterung, unterbau, thingiverse, glas, wall_mount,...
3
3.0
Jan 19, 2022
01/22
by
DJ Mac (DJMac)
data
eye 3
favorite 0
comment 0
I spent some time trying to find a desktop cup holder that would free up my desktop space and avoid the risk of my beverages tipping over onto a keyboard, or worse. I didn't find any I liked, so I designed my own. Please note as part of your installation plans that the cup holder part inserts from behind, not from the front, to allow the stopper mechanism to exist, so you'll need to leave enough room for that. Design Notes: This design went through about 9 iterations before I came upon the...
Topics: Organization, thingiverse, sliding, underdesk, desktop cup holder, cup holder, stl
3
3.0
Jan 5, 2021
01/21
by
Dan blank (dsorgio)
data
eye 3
favorite 0
comment 0
This is my first design ! I have not printed it yet and do not know how strong it is. I recommend to print in PETG for extra strength. This was made to hold my MacBook Pro under my desk while not in use. It will accommodate any MacBook or other laptop that is 28mm or less in total thickness. There is 2 files one for Right side and one for Left side. Print with the writing facing the build plate. The bottom holes were made to accommodate a standard 7mm screw driver bits, and the top holes are...
Topics: laptop, cool, stl, Computer, holder, mount, macbook_pro, wall_mount, laptop_stand, Mac, desk,...
4
4.0
Jul 3, 2021
07/21
by
Daniel Andersen (DanAndersen)
data
eye 4
favorite 0
comment 0
Having a height-adjustable desk, I wanted to have my computer mounted under the desk. There is a relatively cheap pc tower under desk mount which are basically all the same Chinese manufactured holder. Often they are called "cpu holder" (why ever ...) Check out https://www.amazon.com/Under-Desk-Mount-Bracket-Wall-Mountable/dp/B01M4P7EXU for such a model. These holders can only hold cases up to 18 cm size. This extension allows tower cases to hold up to 26 cm wide tower cases, like my...
Topics: bequiet, case_mount, Computer_Accessories, STEP, Computer_mount, fusion360, holder, desk,...
5
5.0
May 1, 2021
05/21
by
Diego Bellagamba (diegobellagamba)
data
eye 5
favorite 0
comment 0
This is a round shape cable holder that can be fixed under your desk with only 1 screw. As shown in the photo, taking advantage of the elasticity of the material, the slot opens to let the cables pass, then closes by itself to prevent them from coming out. It can be printed in PLA or a similar material in elasticity, but it must be printed by placing the cylindrical section on the print bed, to prevent it from breaking during the use described above.
Topics: stl, cable_clip, cable_holder, underdesk, cable_guide, Desk_organizer, cable_management,...
2
2.0
Jan 5, 2021
01/21
by
Diego Saldaña (Diogo921)
data
eye 2
favorite 0
comment 0
i needed for my desk, in order to control thing that i dont move. i hope you can find some use
Topics: stl, switch, Office, thingiverse, underdesk
1
1.0
Oct 26, 2021
10/21
by
Dmytro Strelnikov (dstrelnikov)
data
eye 1
favorite 0
comment 0
Simple underdesk mounting braces for Topping E30/L30. You will need to print 4 of `topping_mounting_side.stl` for mounting either E30 or L30, and you will need to print in addition 2 of `topping_mounting_middle.stl` if you are going to mount both E30 and L30 side-by-side.
Topics: organization, mount, mounting, stl, thingiverse, underdesk, Organization, audio
2
2.0
Oct 14, 2021
10/21
by
Erik Pellom (pellomen)
data
eye 2
favorite 0
comment 0
This is an under the desk cable wrap to keep those pesky cables from being under foot. This is my very first design, but I needed something to wrap up my XLR cables that go through a hole in the middle of my desk. I didn't want those loose cables just hanging around, waiting for someone to snag their foot on them, so I thought I would wrap them up. I personally used supports, but you may be able to get away with none. Since this is my first project, I would really appreciate any constructive...
Topics: thingiverse, podcasting, underdesk, stl, Organization, cord_wrap
2
2.0
Jan 6, 2021
01/21
by
Evzen Tersl (evzentersl)
data
eye 2
favorite 0
comment 0
Use two 4x16mm wood screws to fix it on place Better use a raft to prevent bending
Topics: headphones, stl, ATH, hook, thingiverse, audiotechnica, underdesk, Audio, 40x
2
2.0
Jan 8, 2021
01/21
by
FLO CMP (KORSiRO)
data
eye 2
favorite 0
comment 0
Bonjour à tous ! Voici un petit tiroir sous bureau très pratique pour y ranger vos clés USB et carte micro SD. Le tiroir mesure 84x104x22 mm Les deux rails peuvent être fixé avec du scotch double face sous le bureau. A bientôt ! ____________________________________________________________ Hi ! Here is a small drawer under the desk very practical to store your USB keys and micro SD card. The drawer measures 84x104x22 mm The two rails can be fixed with double-sided tape under the desk. See...
Topics: under_desk, drawer, stl, micro_SD, Office, desk, usb, thingiverse, underdesk
5
5.0
Jan 21, 2021
01/21
by
Felix (tarpaper)
data
eye 5
favorite 0
comment 0
It's my first OpenSCAD thing. You can customize its width and to fit to your desks thickness. The default values fit for 19mm Desk and __Logitech G35__ Headset. Enjoy! #Version 2: Now you can customize the "thickness" of your headsets headband. #Version 3: Fixed bug reported by [ucho150519945](https://www.thingiverse.com/ucho150519945/about). Thank you! Added license information and changelog.
Topics: Audio, headset_holder, G35, headphone_holder, Headset_Hanger, logitech_g433, flashforge_finder,...
2
2.0
Jan 7, 2021
01/21
by
Giovanni (Nergal0)
data
eye 2
favorite 0
comment 0
Under desk mount for Orico USB 3.0 HUB (G11-H4-U3 Model)
Topics: hub, usb_hub, stl, mount, usb, ORICO, thingiverse, underdesk, Electronics
6
6.0
Apr 17, 2021
04/21
by
Goran Atanasov (atanasovgoran)
data
eye 6
favorite 0
comment 0
I needed to mount my DAC under my desk so I designed this. It was designed to fit the Prozor PST054, but it could fit anything with the dimensions of 7cm x 2cm. Might need supports to print. Front mount is the one that has the screw holes hidden while the device is inserted. First find were you want the front of the device to be, screw the Front side in, then put the device into the back mount and slide it into the already mounted front mount screw the back mount and connect your device.
Topics: 054, underdesk, dac, organization, PST, thingiverse, desk, stl, screw, desk_organisation, pst054,...
6
6.0
Apr 17, 2021
04/21
by
Goran Atanasov (atanasovgoran)
data
eye 6
favorite 0
comment 0
I made a mount to hide the remote of the RGB LED controller under my desk, decided to share it. Although the rail mounts are maid specifically for the 44 key variant, the 2/4 part ones can be used with the smaller remotes too, including those chinese radio/TV remotes. PS: Sorry for the portrait video, had a hard time holding my phone horizontally and manipulate the remote. So i gave up. https://youtu.be/mQ6C3WiLHjE
Topics: controller, holder, television, under, remote, underdesk, thingiverse, stl, desk, LED, Office,...
6
6.0
Jan 16, 2021
01/21
by
Goran Atanasov (atanasovgoran)
data
eye 6
favorite 0
comment 0
Update 15 Sep 2017: Added 2 x 3.5 mm version after a request (Note: I used a different method for closing the back cover) [THIS VERSION WILL PROBABLY REQUIRE SUPPORT] I wanted to mount a headphone input underneath my desk near where i sit, so i designed this. Requires a 3.5 mm audio plug and audio cable.
Topics: female, Minimalistic, headphones, thingiverse, jack, mount, plug, connection, minimalist, audio,...
6
6.0
Jan 16, 2021
01/21
by
Goran Atanasov (atanasovgoran)
data
eye 6
favorite 0
comment 0
Underdesk mount for headphones with the ability to have or not have a cable holder. Should support a fair enough weight, but there are no guarantees, use at your own risk, I do not assume any responsibility for any damage caused by the use of this design.
Topics: headphones, thingiverse, screw, Headphone, stl, hanger, headphone_holder, mount, holder, Office,...
2
2.0
Jun 11, 2021
06/21
by
James Demonchy (AstroJohn)
data
eye 2
favorite 0
comment 0
(O.o) Small practical storage to screw under the desk. Requires minimal support. No more messy office / workbench. Useful volume : Height 65 mm x Width 200 mm x Depth 250 mm you only need 6 screws and a little elbow grease Do you well;) ___________________________________________________________ Petit rangement pratique à visser sous le bureau. Nécessite un minimum de support. Fini le bureau/établi en bordel. Volume utile : hauteur 65 mm x largeur 200 mm x profondeur 250 mm Vous n'aurez...
Topics: Organization, underdesk, storage, thingiverse, bannette, tool_storage, Desk_organizer, stl
0
0.0
Apr 20, 2022
04/22
by
Jeremias Wittmann (PrusaJorek)
data
eye 0
favorite 0
comment 0
This mount is designed for Amazon Basic USB 3.0 Cable (3m) You only need two of these cables. Printed with a Prusa Mini+
Topics: thingiverse, usbmount, usb, 3D Printer Accessories, USB_Holder, stl, underdesk
1
1.0
Jun 10, 2021
06/21
by
Jesper Egsgaard Nielsen (Mowglli)
data
eye 1
favorite 0
comment 0
Size Size overall 18.0 x 20.5 x 6.0 cm (WxLxH) Desk outer 17.0 x 20.0 x 5.0 cm (WxLxH) Desk iner 16.5 x 19.5 x 4.8 cm (WxLxH) The holder is printed in PLA and the drawer is printet with ASA. I'll recommend printing both parts in PLA. Drawer facing with the buttom at the buildplate Holder with the backside at the buildplate, so standing tall. Holder took me 18 hours +/-, with a not so optimized 3D-printerprofile As you see i mounted it under my desk. The clearance at the top is there so all...
Topics: home, organizer, Retrogaming, Underdesk_drawer, Mounted, design, homework, drawers, underdesk,...
2
2.0
May 1, 2021
05/21
by
Johan Doo (collectus)
data
eye 2
favorite 0
comment 0
3 versions: - clean - standard - Star Trek holes for 3.5 or 4 mm screws
Topics: stl, headset_hook, Headset_Hanger, headphone_hook, headphones, headset, underdesk,...
3
3.0
Mar 16, 2021
03/21
by
John II (Watcher_)
data
eye 3
favorite 0
comment 0
Original idea was taken from another thing which unfortunately I cannot find now. Apologies to the initial designer but I will keep looking for it and will refer to it when found The thing was completely redesigned to add a second mic socket and a table attachment to the the frame of IKEA THYGE table.
Topics: thingiverse, Computer, headphones, headset, stl, underdesk
2
2.0
Jun 12, 2021
06/21
by
Juan Vitali (juanvitali)
data
eye 2
favorite 0
comment 0
My desk has a step, so the back attachment is elevated. You can easily adjust the height. Printer: Ender 3 Slice settings: Layer Height: 0.28 mm Infill: 30% Supports: No (printed sideways - see the picture) Print Settings: 1 Left_tablet_holder 1 Right_tablet_holder Enjoy !
Topics: Tablet, underdesk, thingiverse, tablet_stand, tablet_holder, stl
2
2.0
May 1, 2021
05/21
by
Julian Wäsler (Julian248)
data
eye 2
favorite 0
comment 0
This is a REMIX of https://www.thingiverse.com/thing:3331407 - The bracket is extended so that the headphones can be hooked in more easily - All touchable corners are strongly rounded
Topics: stl, under_desk_headphones, headphones, underdesk, headphone_holder, holder, Under_desk_holder,...
0
0.0
Apr 19, 2022
04/22
by
Justin Gutzman (jgutz20)
data
eye 0
favorite 0
comment 0
I wanted to mount my MSI Pro DP20Z 5M computer underneath my desk. Its official dimensions are 85 x 160.55 x 193.3 mm but the only one that matters in the height 85mm/8.5cm which is essentially 3.5" (3.34646), This one does have about 1cm of clearance at the top, so overall you have 95mm clearance. Print a couple of these and you can mount anything underneath your desk. I've also attached a picture of a couple versions along the way that i used to test. First one with all straight edges,...
Topics: under_desk_mount, thingiverse, desk_mount, Hook, pc_holder, MSI, under_desk, under_mount, Other,...
