3
3.0
May 1, 2021
05/21
by
Andrew Courter (A05C)
data
eye 3
favorite 0
comment 0
Found on GrabCAD, converted and uploaded most of the pieces. This is a non specific (that I could see), V8 rotating assembly. I did not include any of the piston rings, but could convert the files and upload them also. I'm concerned that they'll be too thin and would break upon trying to install them onto the piston, hence why I didn't convert the files yet. Would probably need to print with a raft and supports for most of the parts (crank primarily), most of the connecting rod (and bearings)...
Topics: stl, thingiverse, v8_engine, Engineering
11
11
Jan 10, 2021
01/21
by
Luz Enith Martinez (Quality_prints)
data
eye 11
favorite 0
comment 0
I used reverse engineering and remade the whole thing to be able to publish drawing. i made some modifications like the holes in the engine block and changed three parts to be able to have bearings on the crank shaft. The steps files are available to allow you to make changes and experiment a little bit more.
Topics: Mechanical Toys, thingiverse, v8_engine, stl
47
47
Mar 19, 2021
03/21
by
IRJASH Journal
texts
eye 47
favorite 0
comment 0
Loss of heat is a significant factor in the performance of internal combustion engines. In addition, a heat transfer phenomenon causes mechanical stresses that are thermally induced, compromising the efficiency of engine components.In engine design, the capability to determine heat transfer in engines plays a vital role. Today, the simulations are progressively being made at a much earlier stage of engine production with numerical simulations In the current research V type multi-cylinder...
Topics: Cylinder block, V8 engine, design, analysis
1
1.0
Apr 20, 2022
04/22
by
Emanuel Chmielowski (Emanuel_Chmielowski)
data
eye 1
favorite 0
comment 0
Scale as you wish
Topics: thingiverse, engine, Vehicles, v8_engine, turbo, stl
2
2.0
Apr 27, 2021
04/21
by
Jon Larraza (JonLG)
data
eye 2
favorite 0
comment 0
Diseño detallado de un colector de aire para el impresionante diseño del motor Chevy Camaro LS3 V8 del Ericthepoolboy. Para diseñar esto he tenido como inspiración el diseño de Thebush1951. El “distribuidor del aire” ha sido modificado para encajar con la “junta” y con la “toma del aire”.
Topics: kit, thingiverse, car, stl, Automotive, v8_engine
1
1.0
Jan 18, 2022
01/22
by
Boris Mzhen (CreepyBoris)
data
eye 1
favorite 0
comment 0
A tool I designed from scratch to Install/Remove the Rocker Cover nut on a Daimler V8 Engine cover (Daimer SP250 ) I printed it using PETG, .28 resolution I used 8 layer walls/top/bottom and 50% infill to make it extra strong which may have been overkill.
Topics: Daimler, thingiverse, Hand Tools, v8_engine, stl
2
2.0
Jan 9, 2021
01/21
by
(1point3liter)
data
eye 2
favorite 0
comment 0
This is a tray for organizing spark plugs. The top of the tray has easy to read cylinder numbers matching those of a LSX or similar. I modeled this to fit measurements of a NGK BR7EF (14mm plug). Plugs fit with electrode in both the up or down positions.
Topics: thingiverse, Automotive, stl, sparkplug, v8_engine, lsx
2
2.0
Apr 1, 2021
04/21
by
DANIEL CANAVESE (dancan13f)
data
eye 2
favorite 0
comment 0
This is an Engine Stand extension for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). The mounting holes are already present on the engine block. # Print Settings 1 x EngineStandBackLeft : Layer:0.15mm Raft:no Brim:no Support:no Infill:20% 1 x EngineStandBackLeftSpacer : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% 1 x EngineStandBackRight : Layer:0.15mm Raft:no Brim:no Support:no Infill:20% 1 x EngineStandBackRightSpacer : Layer:0.15mm Raft:no Brim:no Support:no...
Topics: Mechanical Toys, thingiverse, flat, v8_engine, Ford, stl
2
2.0
Apr 27, 2021
04/21
by
DANIEL CANAVESE (dancan13f)
data
eye 2
favorite 0
comment 0
This is an Intake Manifold remix for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). This design is planned to receive a supercharger soon. # Release 24/03/2020 : New IntakeManifoldPulleyV2 (it replace IntakeManifoldPulley) with deeper groove to prevent the belt from jumping. 30/03/2020 : New IntakeManifoldPulleyHolderV2 (it replace IntakeManifoldPulleyHolder) for the correct position of the Supercharger. # Print Settings 1 x IntakeManifold : Layer:0.15mm Raft:no Brim:no...
Topics: thingiverse, Ford, Mechanical Toys, flathead, stl, v8_engine
5
5.0
Jan 20, 2021
01/21
by
Mindless (Mindless)
data
eye 5
favorite 0
comment 0
Many Thanks Again to "Ericthepoolboy" This Engine has been Scaled down to 1/10th Size,, i have been asked a few times to do this for 1/10th Model Makers,,who aren't to good with Slic3ing Software but are good with there Hand Tools and just needed the Basic Block and Head Exhaust ect,,,so i Just found a Nice Balance with the Scale Size for them to use, I have Built a Support for the Engine Block,,, But have include a Non- Support Version if you want to use your Slic3rs All the Part are...
Topics: engine 1/10th, v8 engine, Automotive, thingiverse, stl
2
2.0
Mar 10, 2021
03/21
by
DANIEL CANAVESE (dancan13f)
data
eye 2
favorite 0
comment 0
This is Tensioner Pulley extension for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). This design is planned to receive a supercharger soon. /!\ Dowload the last release of the Waterpump remix (https://www.thingiverse.com/thing:4173261) ; the pulleys are slightly smaller. # Print Settings 1 x TensionerHolder : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100% 1 x TensionerLever : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100% 1 x TensionerPulley : Layer:0.15mm...
Topics: stl, thingiverse, v8_engine, Mechanical Toys, Ford, flathead
1
1.0
Oct 26, 2021
10/21
by
Hannes Koekemoer (HannesKoekemoer)
data
eye 1
favorite 0
comment 0
Presenting: the V8 smoker. More economical than most V8s. Created as part of a fun weekend at the ftijpi Facebook page. No, this is probably not safe to smoke out of. Should be able to print without support inside the engine. Cigarette holes are sized at 8 mm. You might have to adjust the scale so they fit snugly. I don't smoke, so I didn't test it out.
Topics: smoke, v8_engine, Interactive Art, stl, thingiverse, ftijpi
2
2.0
Apr 1, 2021
04/21
by
DANIEL CANAVESE (dancan13f)
data
eye 2
favorite 0
comment 0
This is an add-on for Exhaust Headers of the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). Be careful ; ExhaustHeader1Collector and ExhaustHeader2Collector are not the same. # Print Settings 1 x ExhaustHeader1Collector : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100% 1 x ExhaustHeader2Collector : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100% 6 x ExhaustHeaderGasket : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% 2 x ExhaustHeaderGasketCollector : Layer:0.15mm...
Topics: Mechanical Toys, thingiverse, v8_engine, Ford, flathead, stl
3
3.0
Mar 13, 2021
03/21
by
DANIEL CANAVESE (dancan13f)
data
eye 3
favorite 0
comment 0
This is a new Timing Cover and the Distributor for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). This design is planned to receive a supercharger soon. The assembly of this part is meticulous; the components are quite fragile, especially the "TimingCoverDistributorTop". The livewires are provided for 3mm silicon electric wires. On my pictures, the TimingCover is mounted with screws; if it has to replace the original model it can be fitted with 4mmx2mm disk magnets....
Topics: Ford, thingiverse, flathead, stl, v8_engine, Mechanical Toys
1
1.0
May 1, 2021
05/21
by
Gilbert Madrid (ScatPack)
data
eye 1
favorite 0
comment 0
Custom 540 V8 emblem designed for a Chevrolet Bel-Air
Topics: stl, 540_motor, Automotive, 540, v8_engine, thingiverse
2
2.0
Apr 1, 2021
04/21
by
DANIEL CANAVESE (dancan13f)
data
eye 2
favorite 0
comment 0
This is an Alternator extension for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). This design is planned to receive a supercharger soon. # Release 24/03/2020 : New AlternatorHolderPulleyV2 (it replace AlternatorHolderPulley) with deeper groove to prevent the belt from jumping. # Print Settings 1 x AlternatorBack : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100% 1 x AlternatorBody : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% 1 x AlternatorFront : Layer:0.15mm...
Topics: Mechanical Toys, thingiverse, v8_engine, Ford, flathead, stl
2
2.0
Mar 10, 2021
03/21
by
DANIEL CANAVESE (dancan13f)
data
eye 2
favorite 0
comment 0
This is an Transmission 3 speeds extension for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). It's a complex remix of "1939 Ford Toploader Transmission by skipstitch" (https://www.thingiverse.com/thing:2940612). It is made up of 19 pieces ; the release shaft works and the drive shaft turns on bearings. # Print Settings 1 x TransmissionBody : Layer:0.15mm Raft:no Brim:no Support:yes Infill:15% 1 x TransmissionBodyGasket : Layer:0.15mm Raft:no Brim:no Support:no...
Topics: stl, thingiverse, v8_engine, Mechanical Toys, Ford, flathead
2
2.0
Apr 2, 2021
04/21
by
DANIEL CANAVESE (dancan13f)
data
eye 2
favorite 0
comment 0
This is Carburetor extension for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). It is made for this supercharger : https://www.thingiverse.com/thing:4220132 This carburetor is inspired by the "Edelbrock Performer Carburetor 1404" model. It is undoubtedly the most complex part that I have modeled to date because of its very small size and the number of parts which compose it. I took certain liberties (in particular on the Coil Housing part) to allow the shutters and...
Topics: Mechanical Toys, thingiverse, v8_engine, Ford, flathead, stl
2
2.0
Apr 1, 2021
04/21
by
DANIEL CANAVESE (dancan13f)
data
eye 2
favorite 0
comment 0
This is an Oil Pan remix for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). Features : - Gaskets - Oil Pan remix (for Dispstick) - Oil Pan Starter Flange remix (closed) - Oil Pan Disptick - Starter enclosure # Print Settings 1 x OilPan : Layer:0.15mm Raft:no Brim:no Support:yes Infill:15% 1 x OilPanDipstick : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100% 1 x OilPanDipstickGasket : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% 1 x OilPanDipstickHolder :...
Topics: Mechanical Toys, thingiverse, v8_engine, Ford, flathead, stl
2
2.0
Apr 1, 2021
04/21
by
DANIEL CANAVESE (dancan13f)
data
eye 2
favorite 0
comment 0
This is Waterpumps remix for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). This design is planned to receive a supercharger soon. # Release 05/03/2020 : WaterpumpPulley is slightly smaller for then tensioner pulley extension (https://www.thingiverse.com/thing:4203916) # Print Settings 1 x WaterpumpLeft : Layer:0.15mm Raft:no Brim:no Support:yes Infill:80% 1 x WaterpumpLeftGasket : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% 1 x WaterpumpRight : Layer:0.15mm Raft:no...
Topics: Mechanical Toys, thingiverse, v8_engine, Ford, flathead, stl
2
2.0
Apr 27, 2021
04/21
by
DANIEL CANAVESE (dancan13f)
data
eye 2
favorite 0
comment 0
This is an Supercharger extension for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). Then come the carburetor and the air intake. Video : https://youtu.be/RZmVCxzOg90 # Release 25/03/2020 : New SuperchargerPulleyV2 (it replace SuperchargerPulley) with deeper groove to prevent the belt from jumping. 30/03/2020 : Change the position of the supercharger to rotate the two helical screws in the correct direction. The support of the two pulleys of Intake Manifold is also updated...
Topics: thingiverse, Ford, Mechanical Toys, flathead, stl, v8_engine
2
2.0
Jan 4, 2021
01/21
by
DANIEL CANAVESE (dancan13f)
data
eye 2
favorite 0
comment 0
This is a Crank Pulley remix for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). This design is planned to receive a supercharger soon. # Print Settings 1 x CrankPulley : Layer:0.15mm Raft:no Brim:no Support:no Infill:20% 1 x CrankPulleySpacer : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% # Accessories 1 x 10mm long 2mm rod 1 x m3x50mm SHCS 1 x m3 washer # Mounting Look at pictures.
Topics: Ford, stl, Mechanical Toys, v8_engine, thingiverse, flathead
11
11
Apr 17, 2021
04/21
by
Jacob Byrnes (Jbyrnes)
data
eye 11
favorite 0
comment 0
This is a simplified model of a V8 engine. All the files have fairly big tolerances so you should not have issues with parts fitting together nicely. This is a fairly large model, approximately 160mm long by 140mm wide by 100mm tall. If you scale down the model it may be tough to get some parts to print well and may be difficult to fit them together but it should work if your printer is well calibrated. Assembly is fairly straight forward, you should have all the information needed to assemble...
Topics: Mechanical Toys, thingiverse, v8_engine, stl, Model_engine, engine
2
2.0
Sep 14, 2021
09/21
by
Random Person (Randomyc)
data
eye 2
favorite 0
comment 0
This is a Chevrolet v8 engine meant for decoration. It's dimensions are roughly 100x100x70mm.
Topics: stl, thingiverse, block, engine, chevrolet, motor, Vehicles, v8_engine
1
1.0
Nov 30, 2021
11/21
by
Mednick Online Networks (DevlshOne)
data
eye 1
favorite 0
comment 0
This is a rack of velocity stacks for a small block chevy V8 engine. Stacks are angled to provide maximum intake. Also includes a small blast box.
Topics: racing, v8_engine, thingiverse, intake, stacks, Automotive, stl, chevy
2
2.0
Mar 15, 2021
03/21
by
Nicholas Grimm (nlgrimm)
data
eye 2
favorite 0
comment 0
Funnel designed with a 30° bend for slanted engine oil fill openings. Great for motorcycles and old cars.
Topics: thingiverse, Automotive, Oil_funnel, v8_engine, stl, oil, Funnel
8
8.0
Mar 10, 2021
03/21
by
Kaworu Chang (gumo_design)
data
eye 8
favorite 0
comment 0
https://grabcad.com/library/turbo-v8-engine-1 Modified from "Turbo V8 Engine" by Enes DUMAN hand-wind only I want to design it like an air-powered motor but i was struggling with air-splitting mechanism don't know how to design a compact, simple mechanism that works as cam+valve *https://drive.google.com/open?id=0B-_Qsg7qZiCAamNveGY4MTRjMlU This is the STEP file of the design. Please feel free to play with it!
Topics: air, stl, thingiverse, gasoline, v8_engine, Engineering, engine, gaz, moteur
2
2.0
Jul 22, 2021
07/21
by
Michael Anson (Lostcauseart)
data
eye 2
favorite 0
comment 0
This is a remix of the spark plug holder by zodlyrob. The only change was to remove 2 cylinders for a true V8. There is only the main body, the front and rear piston pieces can be downloaded from the original design.
Topics: holder, Automotive, spark_plug, stl, tool, v8_engine, thingiverse, sparkplug
10
10.0
Jan 20, 2021
01/21
by
Maarten Kurver (byctrldesign)
data
eye 10
favorite 0
comment 0
not the the most easy print to do so read the instructions well. only the scania v8 part is printed with support. first print the scania file. then the scania v8 file. this was the easy part of the print. now comes the tricky part. load the scania bird black and grey right part 1 in the slicer. for the black part you have to print from 0 and let the print stop at 1,8 mm. For the grey part you have to print from 1,8 mm til the end. then load the scania bird red and yellow right part 2 in the...
Topics: scania, Models, thingiverse, byctrldesign, v8_engine, by_ctrl_design, stl
2
2.0
Jan 5, 2021
01/21
by
Henry De Vries (flyin55)
data
eye 2
favorite 0
comment 0
This is a velocity stack add-on for the supercharger remix for erics LS3 v8 engine
Topics: stl, LS3, engine, Automotive, v8_engine, ls3 velocity stack, thingiverse
4
4.0
Jun 11, 2021
06/21
by
(Pascal95)
data
eye 4
favorite 0
comment 0
Summary Just a test piece, i was not able to remove all the errors from the file, but it prints fine at 0.1mm layer Original piece : https://www.thingiverse.com/thing:3260204 ***(update, this can't run since half of the cams run backward (and will cancel rotation from each other) Some re-engineering will be required
Topics: kitchen, modular, thingiverse, v8 engine, engine, air engine, concept, stl
2
2.0
Apr 27, 2021
04/21
by
(Ky3)
data
eye 2
favorite 0
comment 0
Sometimes things need some gofast(tm)... A supercharged V8 oughta do the trick!
Topics: thingiverse, supercharger, PrintABlok, engine, stl, Construction Toys, interlocking, v8_engine
2
2.0
Mar 25, 2021
03/21
by
Michael McShane (mcshane0507)
data
eye 2
favorite 0
comment 0
This bellhousing allows mounting of Eric's Toyota 5 speed manual transmission on the Chevy Camaro LS3 V8 engine. An interpose piece is required on the flywheel in substitution of the pressure plate and fulfils the drive function through to the transmission.
Topics: stl, v8_engine, thingiverse, chevy, Engineering, Manual_Transmission, toyota, camaro
Topics: Youtube, video, Gaming, Automation The Car Company Tycoon Game, Automation, Automation Game,...
2
2.0
Jun 11, 2021
06/21
by
Salvador Richter (salvador-richter)
data
eye 2
favorite 0
comment 0
This is a model of small-block V8 engine. I didn't scale it down and printed the maximum volume, to enable the storage of even bigger parts on my desk. The original stl did not slice properly on the Anyvubic Workshop why I did some automatical repair.
Topics: Vehicles, model, thingiverse, engine, v8_engine, pen_holder, pencil_holder, stl
2
2.0
Jan 5, 2021
01/21
by
NXT 3DRC (NXT3DRC)
data
eye 2
favorite 0
comment 0
V8 Exhaust manifold with integrated turbo. This is designed for the hood of the Element enduro Sendero but it will fit other cars or vehicles too. Tap M3 thread in the left and right manifold piece, use some glue for the other parts. Use 6 M3x12mm bolts for fixation. (The holes position is identical to the holes used for the air intake parts i published before.) OTHER END PIECES AVAILABLE SOON!
Topics: R/C Vehicles, exhaust manifold, stl, v8_engine, manifold, exhaust, thingiverse
3
3.0
Mar 15, 2021
03/21
by
Caleb Perry (Wowthatscool78)
data
eye 3
favorite 0
comment 0
1/64 scale V8 engine designed by me. Should already be the perfect size when printed.
Topics: modle, thingiverse, custom_hotwheels, v8_engine, 164, stl, 164_scale, hotwheels, Vehicles
6
6.0
Jan 20, 2021
01/21
by
michael Lynn (Michaellynn)
data
eye 6
favorite 0
comment 0
A duel carb supercharger file that you can download and add to whatever you like in tinkercad or other modeling software. I used this in a truck I printed. This supercharger is 3d printing friendly without the need for supports. Just stick this out the hood of your model and print away. *I put this up here for people to use the file as add on not to print this alone by it self.
Topics: engine, SBC, supercharged, Automotive, Ford, thingiverse, supercharger, chevy, v8_engine, motor, stl
1
1.0
Jan 19, 2022
01/22
by
Patrik Spielmann (TheKazush)
data
eye 1
favorite 0
comment 0
Easy to Print Mustang Keychain 96mmx35mmx14mm
Topics: easy, thingiverse, Ford_Mustang, Mustang, Keychains, easy_to_print, v8_engine, stl
3
3.0
May 1, 2021
05/21
by
Zak Rahman (Z3DPRINTING)
data
eye 3
favorite 0
comment 0
READ ALL I've modified this so that it is easier to print, but it will take more time to assemble. I separated the crankshaft and pistons. Print the crank horizontally for strength. Also it makes it easier to lubricate this way. Print it on a raft as when I removed the raft it took most of the supports with it. I've redesigned the pistons so that they snap on to the crankshaft. I've made it so that it is easier to put them on than it is to take them off. I've found it best to print the pistons...
Topics: stl, mechanical, Models, engineering, engine, mechanism, stem, v8_engine, car, thingiverse, model
6
6.0
Apr 17, 2021
04/21
by
Alden Cost (camaroboy383)
data
eye 6
favorite 0
comment 0
this is a lifter and pushrod organizer for v8 engine rebuilds and tear downs.. keeps all your pushrods and lifters in order ... will fit pushrods up to 3/8" and lifters up to 1" this keeps your parts safe and makes sure your lifters go back in the same bores they came out of... this is a large print... it needs a 300x300mm bed or larger to print.. if you are using a 300mm bed (original cr-10) and it wont slice go into your slicer printer settings and set the bed dimensions to 301mm in...
Topics: ENGINE ORGANIZER, Automotive, BBC, LIFTERS, thingiverse, v8_engine, stl, V-8, PUSHRODS, SBC
2
2.0
Jan 9, 2021
01/21
by
T Murray (0patience)
data
eye 2
favorite 0
comment 0
This is a remix. From Chevy Engine 350 Modifided Card Holder by Michaellynn https://www.thingiverse.com/thing:2987608 Which was a remix from Small Block Engine by pugboi https://www.thingiverse.com/thing:2287237 It was modified to split it into parts and allow the stacks to be pen holders. There are 2 different style valve covers, cause the original files had one of each. So the choice is to use what you want. With the multiple parts, it can be printed in different color filaments and glued...
Topics: thingiverse, Automotive, stl, small_block, car, v8_engine, business_card_holder, pen_holder
9
9.0
Apr 30, 2021
04/21
by
Sebastian Walenta (TheChopsee)
data
eye 9
favorite 0
comment 0
V8engine for rc car model
Topics: stl, v8 engine, engine, r/c, RC_Car, thingiverse, model, R/C Vehicles
2
2.0
Jun 11, 2021
06/21
by
josef vladik (mochr)
data
eye 2
favorite 0
comment 0
Model of HotRod car, in scale 1/43, for resin printer. missing body.stl and frame.stl, if you want them, send me 10USD and i send files to you.
Topics: mini, Mechanical Toys, car, model, hotrod, thingiverse, scale, engine, v8_engine, hot rod, stl
4
4.0
Jan 4, 2021
01/21
by
Car guy47 (CarGuy47)
data
eye 4
favorite 0
comment 0
this is a remix of jw27's unicorn mustang. i made a remix of this instead of just taking one of the exiting ones because this one has lots of details like the real badge instead of those flat ones. i basically just removed the horn to make it into a true mustang badge
Topics: 3D Printing, 60s, Ford, stl, v8_engine, horse, logo, thingiverse, Mustang, Ford_Mustang, badge
8
8.0
Apr 23, 2021
04/21
by
Gregor Gerlach (MrCadillacsts)
data
eye 8
favorite 0
comment 0
This is the conversion of an idea from user Klampykixx. I´ve converted the "V8 receiverbox" to hide your 540 style electric motor of your R/C car, now! This database contains only the parts which are different to the "V8 receicerbox", so all accessories for the engine can be used from the "V8 receiverbox". http://www.thingiverse.com/thing:842254 This model will work with standard or modified 540 engines (35,8 mm diameter, 50mm lenght). I applied openings for the...
Topics: rock_crawler, V8 engine, thingiverse, chevy, stl, R/C Vehicles, axial, crawler, scaler, 540 motor
2
2.0
Jun 7, 2021
06/21
by
vincent scarset (ScarsetDesign)
data
eye 2
favorite 0
comment 0
SDR V8 Dummy engine 1/10 scale. https://sdracing.shop/
Topics: engine, 1/10 scale, v8_engine, thingiverse, stl, sdracing, R/C Vehicles, sdr, scale accessory
5
5.0
May 1, 2021
05/21
by
An Cs (Turbo_SunShine)
data
eye 5
favorite 0
comment 0
This is a print in place model, meaning there is no assembly required! ** See how it works: https://youtu.be/n4ovYJdgHNU ** ** Please like the Thingiverse Thing, it helps alot! :) ** There is more info on the design in this video: https://youtu.be/DFjD8iOUx0I **Important:** -Use 0.2mm layer height (or finer) -Use a 0.4mm Nozzle (or finer) -No Support -No horizontal expansion compensation! Please leave your questions and comments in the comment field, and I’ll do my best to answer them. Check...
Topics: stl, cool, no asembly, Motor, engine, v8_engine, Print in place, car, thingiverse, 3D Printing
2
2.0
Jan 8, 2021
01/21
by
Richard Raueiser (Uforic)
data
eye 2
favorite 0
comment 0
This is a dummy exhaust for the Traxxas Funny car
Topics: R/C Vehicles, stl, V 8, Traxxas, v8_engine, thingiverse, exhaust, Traxxas_Funnycar, Dragster, RC_Car
2
2.0
May 1, 2021
05/21
by
Viktor Von Due (Viktor_von_Due)
data
eye 2
favorite 0
comment 0
i really liked the design that holds beer cans by Tom--DK. https://www.thingiverse.com/thing:4760105 i just don't drink beer out of cans, and it was too large to be printed on my ender 3 pro. so i designed it to fit 0,5L bottles, divided it to 8 parts, and added the handle and lids separately. the lids are a little loose, so they might come off too easily. i recommend glueing them on, or making a remix. i might upload a better version of them things to print: 2x Side 2x Side mirrored 2x Middle...
Topics: stl, beer_bottle, beerholder, bottle_holder, holder, beer, austria, engine, v8_engine, bottle,...
