4
4.0
Apr 27, 2021
04/21
by
DANIEL CANAVESE (dancan13f)
data
eye 4
favorite 0
comment 0
This is an Intake Manifold remix for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). This design is planned to receive a supercharger soon. # Release 24/03/2020 : New IntakeManifoldPulleyV2 (it replace IntakeManifoldPulley) with deeper groove to prevent the belt from jumping. 30/03/2020 : New IntakeManifoldPulleyHolderV2 (it replace IntakeManifoldPulleyHolder) for the correct position of the Supercharger. # Print Settings 1 x IntakeManifold : Layer:0.15mm Raft:no Brim:no...
Topics: thingiverse, Ford, Mechanical Toys, flathead, stl, v8_engine
4
4.0
Apr 27, 2021
04/21
by
DANIEL CANAVESE (dancan13f)
data
eye 4
favorite 0
comment 0
This is an Supercharger extension for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). Then come the carburetor and the air intake. Video : https://youtu.be/RZmVCxzOg90 # Release 25/03/2020 : New SuperchargerPulleyV2 (it replace SuperchargerPulley) with deeper groove to prevent the belt from jumping. 30/03/2020 : Change the position of the supercharger to rotate the two helical screws in the correct direction. The support of the two pulleys of Intake Manifold is also updated...
Topics: thingiverse, Ford, Mechanical Toys, flathead, stl, v8_engine
4
4.0
Mar 10, 2021
03/21
by
DANIEL CANAVESE (dancan13f)
data
eye 4
favorite 0
comment 0
This is an Transmission 3 speeds extension for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). It's a complex remix of "1939 Ford Toploader Transmission by skipstitch" (https://www.thingiverse.com/thing:2940612). It is made up of 19 pieces ; the release shaft works and the drive shaft turns on bearings. # Print Settings 1 x TransmissionBody : Layer:0.15mm Raft:no Brim:no Support:yes Infill:15% 1 x TransmissionBodyGasket : Layer:0.15mm Raft:no Brim:no Support:no...
Topics: stl, thingiverse, v8_engine, Mechanical Toys, Ford, flathead
4
4.0
Apr 2, 2021
04/21
by
DANIEL CANAVESE (dancan13f)
data
eye 4
favorite 0
comment 0
This is Carburetor extension for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). It is made for this supercharger : https://www.thingiverse.com/thing:4220132 This carburetor is inspired by the "Edelbrock Performer Carburetor 1404" model. It is undoubtedly the most complex part that I have modeled to date because of its very small size and the number of parts which compose it. I took certain liberties (in particular on the Coil Housing part) to allow the shutters and...
Topics: Mechanical Toys, thingiverse, v8_engine, Ford, flathead, stl
9
9.0
Apr 23, 2021
04/21
by
Gregor Gerlach (MrCadillacsts)
data
eye 9
favorite 0
comment 0
This is the conversion of an idea from user Klampykixx. I´ve converted the "V8 receiverbox" to hide your 540 style electric motor of your R/C car, now! This database contains only the parts which are different to the "V8 receicerbox", so all accessories for the engine can be used from the "V8 receiverbox". http://www.thingiverse.com/thing:842254 This model will work with standard or modified 540 engines (35,8 mm diameter, 50mm lenght). I applied openings for the...
Topics: rock_crawler, V8 engine, thingiverse, chevy, stl, R/C Vehicles, axial, crawler, scaler, 540 motor
5
5.0
Mar 15, 2021
03/21
by
Caleb Perry (Wowthatscool78)
data
eye 5
favorite 0
comment 0
1/64 scale V8 engine designed by me. Should already be the perfect size when printed.
Topics: modle, thingiverse, custom_hotwheels, v8_engine, 164, stl, 164_scale, hotwheels, Vehicles
5
5.0
Mar 13, 2021
03/21
by
DANIEL CANAVESE (dancan13f)
data
eye 5
favorite 0
comment 0
This is a new Timing Cover and the Distributor for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). This design is planned to receive a supercharger soon. The assembly of this part is meticulous; the components are quite fragile, especially the "TimingCoverDistributorTop". The livewires are provided for 3mm silicon electric wires. On my pictures, the TimingCover is mounted with screws; if it has to replace the original model it can be fitted with 4mmx2mm disk magnets....
Topics: Ford, thingiverse, flathead, stl, v8_engine, Mechanical Toys
4
4.0
Apr 1, 2021
04/21
by
DANIEL CANAVESE (dancan13f)
data
eye 4
favorite 0
comment 0
This is an add-on for Exhaust Headers of the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). Be careful ; ExhaustHeader1Collector and ExhaustHeader2Collector are not the same. # Print Settings 1 x ExhaustHeader1Collector : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100% 1 x ExhaustHeader2Collector : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100% 6 x ExhaustHeaderGasket : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% 2 x ExhaustHeaderGasketCollector : Layer:0.15mm...
Topics: Mechanical Toys, thingiverse, v8_engine, Ford, flathead, stl
4
4.0
Jan 4, 2021
01/21
by
DANIEL CANAVESE (dancan13f)
data
eye 4
favorite 0
comment 0
This is a Crank Pulley remix for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). This design is planned to receive a supercharger soon. # Print Settings 1 x CrankPulley : Layer:0.15mm Raft:no Brim:no Support:no Infill:20% 1 x CrankPulleySpacer : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% # Accessories 1 x 10mm long 2mm rod 1 x m3x50mm SHCS 1 x m3 washer # Mounting Look at pictures.
Topics: Ford, stl, Mechanical Toys, v8_engine, thingiverse, flathead
4
4.0
Apr 1, 2021
04/21
by
DANIEL CANAVESE (dancan13f)
data
eye 4
favorite 0
comment 0
This is Waterpumps remix for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). This design is planned to receive a supercharger soon. # Release 05/03/2020 : WaterpumpPulley is slightly smaller for then tensioner pulley extension (https://www.thingiverse.com/thing:4203916) # Print Settings 1 x WaterpumpLeft : Layer:0.15mm Raft:no Brim:no Support:yes Infill:80% 1 x WaterpumpLeftGasket : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% 1 x WaterpumpRight : Layer:0.15mm Raft:no...
Topics: Mechanical Toys, thingiverse, v8_engine, Ford, flathead, stl
3
3.0
May 1, 2021
05/21
by
Gilbert Madrid (ScatPack)
data
eye 3
favorite 0
comment 0
Custom 540 V8 emblem designed for a Chevrolet Bel-Air
Topics: stl, 540_motor, Automotive, 540, v8_engine, thingiverse
4
4.0
Apr 1, 2021
04/21
by
DANIEL CANAVESE (dancan13f)
data
eye 4
favorite 0
comment 0
This is an Alternator extension for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). This design is planned to receive a supercharger soon. # Release 24/03/2020 : New AlternatorHolderPulleyV2 (it replace AlternatorHolderPulley) with deeper groove to prevent the belt from jumping. # Print Settings 1 x AlternatorBack : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100% 1 x AlternatorBody : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% 1 x AlternatorFront : Layer:0.15mm...
Topics: Mechanical Toys, thingiverse, v8_engine, Ford, flathead, stl
4
4.0
Apr 1, 2021
04/21
by
DANIEL CANAVESE (dancan13f)
data
eye 4
favorite 0
comment 0
This is an Oil Pan remix for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). Features : - Gaskets - Oil Pan remix (for Dispstick) - Oil Pan Starter Flange remix (closed) - Oil Pan Disptick - Starter enclosure # Print Settings 1 x OilPan : Layer:0.15mm Raft:no Brim:no Support:yes Infill:15% 1 x OilPanDipstick : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100% 1 x OilPanDipstickGasket : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% 1 x OilPanDipstickHolder :...
Topics: Mechanical Toys, thingiverse, v8_engine, Ford, flathead, stl
4
4.0
Apr 1, 2021
04/21
by
DANIEL CANAVESE (dancan13f)
data
eye 4
favorite 0
comment 0
This is an Engine Stand extension for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). The mounting holes are already present on the engine block. # Print Settings 1 x EngineStandBackLeft : Layer:0.15mm Raft:no Brim:no Support:no Infill:20% 1 x EngineStandBackLeftSpacer : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% 1 x EngineStandBackRight : Layer:0.15mm Raft:no Brim:no Support:no Infill:20% 1 x EngineStandBackRightSpacer : Layer:0.15mm Raft:no Brim:no Support:no...
Topics: Mechanical Toys, thingiverse, flat, v8_engine, Ford, stl
5
5.0
Mar 10, 2021
03/21
by
DANIEL CANAVESE (dancan13f)
data
eye 5
favorite 0
comment 0
This is Tensioner Pulley extension for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). This design is planned to receive a supercharger soon. /!\ Dowload the last release of the Waterpump remix (https://www.thingiverse.com/thing:4173261) ; the pulleys are slightly smaller. # Print Settings 1 x TensionerHolder : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100% 1 x TensionerLever : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100% 1 x TensionerPulley : Layer:0.15mm...
Topics: stl, thingiverse, v8_engine, Mechanical Toys, Ford, flathead
4
4.0
May 1, 2021
05/21
by
Viktor Von Due (Viktor_von_Due)
data
eye 4
favorite 0
comment 0
i really liked the design that holds beer cans by Tom--DK. https://www.thingiverse.com/thing:4760105 i just don't drink beer out of cans, and it was too large to be printed on my ender 3 pro. so i designed it to fit 0,5L bottles, divided it to 8 parts, and added the handle and lids separately. the lids are a little loose, so they might come off too easily. i recommend glueing them on, or making a remix. i might upload a better version of them things to print: 2x Side 2x Side mirrored 2x Middle...
Topics: stl, beer_bottle, beerholder, bottle_holder, holder, beer, austria, engine, v8_engine, bottle,...
3
3.0
Mar 25, 2021
03/21
by
Michael McShane (mcshane0507)
data
eye 3
favorite 0
comment 0
This bellhousing allows mounting of Eric's Toyota 5 speed manual transmission on the Chevy Camaro LS3 V8 engine. An interpose piece is required on the flywheel in substitution of the pressure plate and fulfils the drive function through to the transmission.
Topics: stl, v8_engine, thingiverse, chevy, Engineering, Manual_Transmission, toyota, camaro
4
4.0
Mar 15, 2021
03/21
by
Nicholas Grimm (nlgrimm)
data
eye 4
favorite 0
comment 0
Funnel designed with a 30° bend for slanted engine oil fill openings. Great for motorcycles and old cars.
Topics: thingiverse, Automotive, Oil_funnel, v8_engine, stl, oil, Funnel
10
10.0
Mar 10, 2021
03/21
by
Donovan GULLAUD (Donovandu88)
data
eye 10
favorite 0
comment 0
Boss Hoss V8 keychain
Topics: motorbike, motor, boss, corvette, keychain, stl, thingiverse, 3D_keychain, key, v8_engine,...
6
6.0
Jan 20, 2021
01/21
by
Mindless (Mindless)
data
eye 6
favorite 0
comment 0
Many Thanks Again to "Ericthepoolboy" This Engine has been Scaled down to 1/10th Size,, i have been asked a few times to do this for 1/10th Model Makers,,who aren't to good with Slic3ing Software but are good with there Hand Tools and just needed the Basic Block and Head Exhaust ect,,,so i Just found a Nice Balance with the Scale Size for them to use, I have Built a Support for the Engine Block,,, But have include a Non- Support Version if you want to use your Slic3rs All the Part are...
Topics: engine 1/10th, v8 engine, Automotive, thingiverse, stl
4
4.0
Jan 9, 2021
01/21
by
T Murray (0patience)
data
eye 4
favorite 0
comment 0
This is a remix. From Chevy Engine 350 Modifided Card Holder by Michaellynn https://www.thingiverse.com/thing:2987608 Which was a remix from Small Block Engine by pugboi https://www.thingiverse.com/thing:2287237 It was modified to split it into parts and allow the stacks to be pen holders. There are 2 different style valve covers, cause the original files had one of each. So the choice is to use what you want. With the multiple parts, it can be printed in different color filaments and glued...
Topics: thingiverse, Automotive, stl, small_block, car, v8_engine, business_card_holder, pen_holder
Topics: Youtube, video, Autos & Vehicles, Hagerty, Classic Car, Classic Cars, Hagerty Drivers Club,...
4
4.0
Apr 27, 2021
04/21
by
Jon Larraza (JonLG)
data
eye 4
favorite 0
comment 0
Diseño detallado de un colector de aire para el impresionante diseño del motor Chevy Camaro LS3 V8 del Ericthepoolboy. Para diseñar esto he tenido como inspiración el diseño de Thebush1951. El “distribuidor del aire” ha sido modificado para encajar con la “junta” y con la “toma del aire”.
Topics: kit, thingiverse, car, stl, Automotive, v8_engine
2
2.0
Jan 18, 2022
01/22
by
Boris Mzhen (CreepyBoris)
data
eye 2
favorite 0
comment 0
A tool I designed from scratch to Install/Remove the Rocker Cover nut on a Daimler V8 Engine cover (Daimer SP250 ) I printed it using PETG, .28 resolution I used 8 layer walls/top/bottom and 50% infill to make it extra strong which may have been overkill.
Topics: Daimler, thingiverse, Hand Tools, v8_engine, stl
4
4.0
Jan 5, 2021
01/21
by
Alper Zor (Alperzor)
data
eye 4
favorite 0
comment 0
The scaled model of the legendary last naturally aspirated V8 engine of the Mercedes - AMG. This astonishing engine looks very impressive besides its all advanced technical pieces of stuff. Now you can access this scale model. But if you are interested in that kind of model you can visit our Etsy shop at the link below. https://www.etsy.com/listing/854883852/detailed-v8-engine-model-3d-printed?ref=shop_home_active_1&frs=1 Thanks for your interest. Corona-free days for all!
Topics: engine_block, detailed_3d_printing, miniature_scenery, sls_amg_engine, internal_combustion,...
5
5.0
Jan 4, 2021
01/21
by
Alper Zor (Alperzor)
data
eye 5
favorite 0
comment 0
The scaled model of the legendary last naturally aspirated V8 engine of the Mercedes - AMG. This astonishing engine looks very impressive besides its all advanced technical pieces of stuff. Now you can access this scale model. But if you are interested in that kind of model you can visit our Etsy shop at the link below. https://www.etsy.com/listing/854883852/detailed-v8-engine-model-3d-printed?ref=shop_home_active_1&frs=1 Thanks for your interest. Corona-free days for all!
Topics: engine_block, cylinder_head, detailed_3d_printing, miniature_scenery, sls_amg_engine,...
3
3.0
Apr 24, 2021
04/21
by
Simon Eichmann (EasySol)
data
eye 3
favorite 0
comment 0
I designed a piston ring grinder to install new piston rings on my corvette c2. Mounted the printed parts on a scrapwood piece. Worked like a charm.
Topics: engineering, Corvette_C2, v8_engine, small_block, Piston_ring, Ring_Grinder, Automotive, chevrolet,...
7
7.0
Jan 20, 2021
01/21
by
michael Lynn (Michaellynn)
data
eye 7
favorite 0
comment 0
A duel carb supercharger file that you can download and add to whatever you like in tinkercad or other modeling software. I used this in a truck I printed. This supercharger is 3d printing friendly without the need for supports. Just stick this out the hood of your model and print away. *I put this up here for people to use the file as add on not to print this alone by it self.
Topics: engine, SBC, supercharged, Automotive, Ford, thingiverse, supercharger, chevy, v8_engine, motor, stl
4
4.0
Jun 21, 2021
06/21
by
Trav Boi (tbillion)
data
eye 4
favorite 0
comment 0
This Engine is for a Boat i am designing. I got the idea for the engine from youtube and actually designed a 12 cylinder micro version first. this engine uses size 130 DC motors with optical AB Phase Encoders mounted to the back of them (see: https://www.ebay.com/itm/130-Motor-DC6V-12V-7800RPM-Metal-Speed-Encoder-Tachometer-Motor-AB-Phase/192486576192?epid=18003843567&hash=item2cd1181040:g:hKUAAOSw5k1cdyBy ) gears and shafts are all 0.8 modulus plastic gears that come in assortments on...
Topics: R/C Vehicles, electric engine, tfv8baby, boat, thingiverse, RC_Boat, Alternative, stl, toy_boat,...
5
5.0
Mar 22, 2021
03/21
by
RC GANG (KZR)
data
eye 5
favorite 0
comment 0
Engine bay V8 by rc gang 93
Topics: RC_Car, rc_crawler, stl, rc_gang_93, engine_bay, engine, v8_engine, motor, R/C Vehicles, rc_scale,...
5
5.0
Jan 4, 2021
01/21
by
Car guy47 (CarGuy47)
data
eye 5
favorite 0
comment 0
this is a remix of jw27's unicorn mustang. i made a remix of this instead of just taking one of the exiting ones because this one has lots of details like the real badge instead of those flat ones. i basically just removed the horn to make it into a true mustang badge
Topics: 3D Printing, 60s, Ford, stl, v8_engine, horse, logo, thingiverse, Mustang, Ford_Mustang, badge
7
7.0
Jan 9, 2021
01/21
by
Louis Fournier (Louisdioramas)
data
eye 7
favorite 0
comment 0
Ford V8 Deluxe Station Wagon 1937
Topics: 1938, ford_v8, v8_engine, station_wagon, 1939, thingiverse, wargame, wagon, 1935, car, 1942, 1940,...
4
4.0
Mar 18, 2021
03/21
by
Pablo Marulanda (PabloLedgo360)
data
eye 4
favorite 0
comment 0
Design based in Ford trucks. IMPORTANT: Be sure right scale and measurements, before to print
Topics: car_emblem, vehicle, pickup, Ford_F150, Automotive, emblem, thingiverse, engine, vehicles, cars,...
3
3.0
Jun 11, 2021
06/21
by
josef vladik (mochr)
data
eye 3
favorite 0
comment 0
Model of HotRod car, in scale 1/43, for resin printer. missing body.stl and frame.stl, if you want them, send me 10USD and i send files to you.
Topics: mini, Mechanical Toys, car, model, hotrod, thingiverse, scale, engine, v8_engine, hot rod, stl
3
3.0
Jan 5, 2021
01/21
by
Henry De Vries (flyin55)
data
eye 3
favorite 0
comment 0
This is a velocity stack add-on for the supercharger remix for erics LS3 v8 engine
Topics: stl, LS3, engine, Automotive, v8_engine, ls3 velocity stack, thingiverse
4
4.0
Jan 9, 2021
01/21
by
(1point3liter)
data
eye 4
favorite 0
comment 0
This is a tray for organizing spark plugs. The top of the tray has easy to read cylinder numbers matching those of a LSX or similar. I modeled this to fit measurements of a NGK BR7EF (14mm plug). Plugs fit with electrode in both the up or down positions.
Topics: thingiverse, Automotive, stl, sparkplug, v8_engine, lsx
7
7.0
Jun 10, 2021
06/21
by
Luc Tellier (lulu109)
data
eye 7
favorite 0
comment 0
Hi Land Rover enthusiasts In honnor to the very last DEFENDER ever produced, the Defender WORKS V8, please find here the logo fitted on the side of the car. It's made exactly on a picture of that badge. Nevertheless I don't know the exact size as I never met this beast yet. then I decided it will be 100 mm width. This is just small enough to do not have a perfect print of the DEFENDER in the middle of the black cross with a 0.4mm nozzle. Should be better with 0.1 but do not have in house for...
Topics: Land_Rover, defender, car, logo, defender_90, special, thingiverse, flag, 4x4, tfv8baby, v8_engine,...
5
5.0
May 1, 2021
05/21
by
Zak Rahman (Z3DPRINTING)
data
eye 5
favorite 0
comment 0
READ ALL I've modified this so that it is easier to print, but it will take more time to assemble. I separated the crankshaft and pistons. Print the crank horizontally for strength. Also it makes it easier to lubricate this way. Print it on a raft as when I removed the raft it took most of the supports with it. I've redesigned the pistons so that they snap on to the crankshaft. I've made it so that it is easier to put them on than it is to take them off. I've found it best to print the pistons...
Topics: stl, mechanical, Models, engineering, engine, mechanism, stem, v8_engine, car, thingiverse, model
15
15
Apr 17, 2021
04/21
by
Jacob Byrnes (Jbyrnes)
data
eye 15
favorite 0
comment 0
This is a simplified model of a V8 engine. All the files have fairly big tolerances so you should not have issues with parts fitting together nicely. This is a fairly large model, approximately 160mm long by 140mm wide by 100mm tall. If you scale down the model it may be tough to get some parts to print well and may be difficult to fit them together but it should work if your printer is well calibrated. Assembly is fairly straight forward, you should have all the information needed to assemble...
Topics: Mechanical Toys, thingiverse, v8_engine, stl, Model_engine, engine
53
53
Mar 19, 2021
03/21
by
IRJASH Journal
texts
eye 53
favorite 0
comment 0
Loss of heat is a significant factor in the performance of internal combustion engines. In addition, a heat transfer phenomenon causes mechanical stresses that are thermally induced, compromising the efficiency of engine components.In engine design, the capability to determine heat transfer in engines plays a vital role. Today, the simulations are progressively being made at a much earlier stage of engine production with numerical simulations In the current research V type multi-cylinder...
Topics: Cylinder block, V8 engine, design, analysis
3
3.0
Jan 19, 2022
01/22
by
Patrik Spielmann (TheKazush)
data
eye 3
favorite 0
comment 0
Easy to Print Mustang Keychain 96mmx35mmx14mm
Topics: easy, thingiverse, Ford_Mustang, Mustang, Keychains, easy_to_print, v8_engine, stl
7
7.0
May 1, 2021
05/21
by
An Cs (Turbo_SunShine)
data
eye 7
favorite 0
comment 0
This is a print in place model, meaning there is no assembly required! ** See how it works: https://youtu.be/n4ovYJdgHNU ** ** Please like the Thingiverse Thing, it helps alot! :) ** There is more info on the design in this video: https://youtu.be/DFjD8iOUx0I **Important:** -Use 0.2mm layer height (or finer) -Use a 0.4mm Nozzle (or finer) -No Support -No horizontal expansion compensation! Please leave your questions and comments in the comment field, and I’ll do my best to answer them. Check...
Topics: stl, cool, no asembly, Motor, engine, v8_engine, Print in place, car, thingiverse, 3D Printing
5
5.0
Mar 15, 2021
03/21
by
tristan skinner (DiArchetype)
data
eye 5
favorite 0
comment 0
Shoutout to Turbo_SunShine, love the original V-Twin fidget motor! I really liked this V-twin and printed it a bunch of times before deciding I wanted more moving parts and some bits tweaked... Im sure the actual firing orders/rotation of the cylinders are not correct I just wanted them all chugging differently. Im no professional modeler either and the models are very hodge-podged together but they do slice & print smoothly. Ive successfully printed them in PLA & ABS and after a bit of...
Topics: engine, thingiverse, vtwin_engine, motor, V8 engine, Fidget_Toy, Gadgets, v-twin, V6 engine, V8...
4
4.0
Apr 27, 2021
04/21
by
(Ky3)
data
eye 4
favorite 0
comment 0
Sometimes things need some gofast(tm)... A supercharged V8 oughta do the trick!
Topics: thingiverse, supercharger, PrintABlok, engine, stl, Construction Toys, interlocking, v8_engine
4
4.0
Mar 15, 2021
03/21
by
Garrett Binder (gsbinder)
data
eye 4
favorite 0
comment 0
This is my improved engine design using a common block with options for different supercharger stacks and valve covers. Prints very well using a resin printer however FDM will work as well. Use a med wide rubber band for the belts
Topics: thingiverse, SMT10, stl, traxxas, bigfoot, RC_Car, scx10, LMT, 1/10, R/C Vehicles, RC4WD, engine,...
4
4.0
Mar 15, 2021
03/21
by
Garrett Binder (gsbinder)
data
eye 4
favorite 0
comment 0
Another Scale Motor, will need to be printed on Resin Printer. File includes Headers
Topics: tamiya, engine, thingiverse, Axial, motor, RC_Car, smt10, v8_engine, LMT, RC Monster Truck, R/C...
10
10.0
Jan 10, 2021
01/21
by
Dani Kapel (theUNDEAD)
data
eye 10
favorite 0
comment 0
Remix of http://www.thingiverse.com/thing:1479890 Made it so the walls are thicker and you have holes in it so the motor can cool better Also added is an version with the hole a little bigger and a little higher for better coverage of the airhole in the motor If you want to add some details to this motor you can get them here: http://www.thingiverse.com/thing:842254 I DID NOT MADE THIS THING!!! it is made by MrCadillacsts http://www.thingiverse.com/MrCadillacsts/about
Topics: remix, thingiverse, scale, stl, motor, 540_motor, RC4WD, Axial, engine, block, chevy, v8_engine,...
4
4.0
Mar 8, 2021
03/21
by
Kyle Lipton (aussiemuscle)
data
eye 4
favorite 0
comment 0
Rim and Tire for a HSV Manta VS or Holden Commdore VR/VS for use with VR VS SS commodore by ILUS1V. I scaled it to 26mm to suit 1/25 scale print (or 29mm if you print at 1:18 scale). Scaled in software (Flashprint), so i didn't build it to size. If your software can't scale, get a better app. it will require drilling in the back to mount on an axle. 5 spoke alloy rim. lugs and valve are modeled into the design. See ILUS1V body here: https://www.thingiverse.com/thing:3521211
Topics: Holden_Monaro, Australia, Holden_car, stl, thingiverse, v8_engine, Automotive, replica, Ford,...
2
2.0
Nov 30, 2021
11/21
by
Mednick Online Networks (DevlshOne)
data
eye 2
favorite 0
comment 0
This is a rack of velocity stacks for a small block chevy V8 engine. Stacks are angled to provide maximum intake. Also includes a small blast box.
Topics: racing, v8_engine, thingiverse, intake, stacks, Automotive, stl, chevy
4
4.0
Jun 7, 2021
06/21
by
vincent scarset (ScarsetDesign)
data
eye 4
favorite 0
comment 0
SDR V8 Dummy engine 1/10 scale. https://sdracing.shop/
Topics: engine, 1/10 scale, v8_engine, thingiverse, stl, sdracing, R/C Vehicles, sdr, scale accessory
