4
4.0
Jun 11, 2021
06/21
by
(stoutwind_de)
data
eye 4
favorite 0
comment 0
Summary this is a stable holder for your Velleman power pack. fits to the original 100 watts supply. you will need 2xM5 screws and 2xM5 square nuts DIN 562 or 577 to fix it on alfer aluminium profile. In advance to clamp the holder halfes just use 4xM3 scews and 4xM3 square or hexagon nuts to fix them. Advantages: looks great, supply is fixed securely, flexible configuration, ...
Topics: velleman, Velleman_K8200_3Drag, thingiverse, Velleman_K8200, K8200, stl
5
5.0
Jun 11, 2021
06/21
by
(stoutwind_de)
data
eye 5
favorite 0
comment 0
Summary this is another z axis stepper motor holder for Velleman K8200 printer. Grants more flexibility via range setting in x dimension.
Topics: velleman, Velleman_K8200_3Drag, thingiverse, Velleman_K8200, K8200, stl
7
7.0
Mar 17, 2021
03/21
by
Per Hjort (Pady)
data
eye 7
favorite 0
comment 0
Edit 12/06/19: Added Pictures of the finished solution. I have been looking for a great way to make the Z axel go up and down. I have tried a DOZEN designs and none where what I was looking for. Now I have designed my own one and it is in y sense the best one. Easy printet, stiff, easy aligned. Almost nothing can go wrong :-) You need to print 2 of each, but choose if you want TR8 leadscrew or SFU1204 ballscrew. I have designed it so that you can mount it with the motors up or down as there are...
Topics: k8200_3Drag_Velleman, K8200, velleman, Velleman_K8200_3Drag, 3Drag, Velleman_K8200, 3D Printer...
5
5.0
Apr 12, 2021
04/21
by
(JeroenH)
data
eye 5
favorite 0
comment 0
This little part makes it a lot easier to mount the z-axis sensor.
Topics: thingiverse, Velleman_K8200_3Drag, velleman, K8200, stl, Velleman_K8200, 3D Printer Parts
11
11
Apr 21, 2021
04/21
by
VellemanStore (vellemanstore)
data
eye 11
favorite 0
comment 0
Keep all your SD Cards in one place on your Vertex K8400 3D Printer with this SD Card Holder! Made with Velleman Vertex K8400 3D Printer!
Topics: thingiverse, stl, velleman, Velleman_K8200, SD_Card_Holder, K8400_Velleman, 3D Printer Accessories,...
5
5.0
Mar 5, 2021
03/21
by
Jens Jacobsen (JensChrHJacobsen)
data
eye 5
favorite 0
comment 0
Better cooler for the design from Bo.Ris for dual e3d on k8400 https://www.thingiverse.com/thing:2177331 you´ll have to cut the tips of the fang to the right lenght fits a 5015 blower
Topics: K8400_Velleman, stl, Velleman_K8400, Bo_Ris, 3D Printer Parts, velleman, thingiverse
4
4.0
Mar 15, 2021
03/21
by
nicolas (spacekoaster)
data
eye 4
favorite 0
comment 0
You'll need: 4x 608 Ball bearings 2x M5x12 screws with corresponding nuts 4x M6x30 screws with corresponding nuts Print: 2x Spool Holder Arm 4x Spool Holder Spacer 4x Spool Holder Roller
Topics: thingiverse, velleman, K8200, Velleman_K8200_3Drag, stl, Velleman_K8200, 3D Printer Parts
5
5.0
Apr 16, 2021
04/21
by
Hans-Burton Heathcote (Rudyard_Kipling)
data
eye 5
favorite 0
comment 0
This belt spanner is for the genereal set-up as you can see in this Thing: I had changed to 20T XL Aluminium timing pulleys, so in consequence I had to adapt the spanning mechanism or take a shorter XL belt. I am using currently a 506XL037 and would have needed to go down to something like 490XL037. For the pulley I am using a bearing and have provided it with shoulders to prevent the belt to slip off. Why did I do the change - even with best calibration a printed 24T XL Timing pulley was not...
Topics: velleman, Velleman_K8200, 3D Printer Parts, thingiverse, Velleman_K8200_3Drag, K8200, 3Drag, stl
16
16
Jan 12, 2021
01/21
by
Alexandre DESORBAIX (champix)
data
eye 16
favorite 0
comment 0
encolsure for ***velleman EDU09 usb scope kit*** need some scpacers to hold the card you can print it too !! like http://www.thingiverse.com/thing:1667267 to make it easy to print i w'ill open some big faces in a while. ATTENTION: parts are very big .... dont make too hard shells, and use strong glue ;) **making it with colors:** stop and change filament just after the end of the last big plane surface"roof"
Topics: velleman, thingiverse, osciloscope, Hobby, stl, edu09, Velleman_case, velleman_kit, case
6
6.0
Apr 8, 2021
04/21
by
william yerazunis (wsy)
data
eye 6
favorite 0
comment 0
The standard K8200 extruder filament entry guide will wear down pretty fast when printing particulate-loaded, abrasive filaments like brick, ceramic, or glow-in-the-dark. This improved filament entry guide should last at least 3x longer (note the photo showing a worn-out standard guide on the right and the improved guide on the left. The standard guide didn't even last a whole kilogram of glow-in-the-dark filament). This improved guide is also easier to remove and replace; just grab the big...
Topics: Velleman_K8200_3Drag, k8200_3Drag_Velleman, 3D Printer Parts, K8200, Velleman, extruder, stl,...
6
6.0
Apr 13, 2021
04/21
by
Hans-Burton Heathcote (Rudyard_Kipling)
data
eye 6
favorite 0
comment 0
I have been working on my printer for some time and I think the 8mm rods on the y-axis are just too flexible. So I set out to change them to 10mm. This small change of 2mm to 10mm rod should double the stiffness. (Cubic function to the diameter). Now you all could claim that we have then more mass running around. Correct! There is an increase of 56.25% in mass of the rods, or to be more specific by 124g in total. In case you print on glass this is equivalent to 1mm thickness of your glass pane....
Topics: thingiverse, Velleman_K8200_3Drag, velleman, K8200, stl, Velleman_K8200, 3Drag, 3D Printer Parts
10
10.0
Mar 10, 2021
03/21
by
VellemanStore (vellemanstore)
data
eye 10
favorite 0
comment 0
3D Printing is more than just a hobby to most. It's a way to be creative, while making objects that entertain or offer utility to your daily life. Users of the Velleman Vertex K8400 3D Printer can showcase their love for 3d printing with this attractive Vertex Logo Keychain. Print the Velleman Vertex K8400 Logo Keychain in any color filament you wish. Stand out in a crowd when other Vertex users recognize its iconic logo.
Topics: K8400, Velleman_K8400, Vertex_K8400, vertex, stl, thingiverse, K8400_Velleman, velleman, Keychains,...
4
4.0
Apr 12, 2021
04/21
by
Martin Bond (Bondeus)
data
eye 4
favorite 0
comment 0
This is a design for reducing the wobble of the Z-spindle for the K8200 printer, this design uses 6 mm steel pins. Drill the holes in the part so it moves easy, also add some lubrication. My intention was to use LM3UU bearings and a 3 mm dowel pin but this worked soo good that I never bother to change it. http://youtu.be/prmnrVQ3Sb4 an animation that shows how it works.
Topics: thingiverse, Velleman_K8200_3Drag, K8200, stl, Velleman_K8200, 3D Printer Parts,...
12
12
Jan 10, 2021
01/21
by
Lucky Luzz (LuckyLuzz)
data
eye 12
favorite 0
comment 0
This is a cover for the Vertex K8400 3D Printer. It's fitting the original design and fit ontop of the printer. The design is using the original corners, screws and 4mm acrylic glass. Lasercut: 2x FrontRear Panel 2x Side Panel 1x Top Panel Also you need: 32x M5x12 screws 32x M5 self locking Nuts 8x Medium Corners I asked the Velleman Support if they would send me 8 of those corners and so they did. @ Velleman: Thanks! => http://support.velleman.eu/ After assembly you have to drill 4 of the...
Topics: velleman, thingiverse, stl, K8400_Velleman, 3D Printer Parts, Vertex_8400, Velleman_K8400,...
9
9.0
Apr 16, 2021
04/21
by
marijn van den Heuvel (Marijn_H)
data
eye 9
favorite 0
comment 0
So I posted this on Grabcad, Thought it might be very usefull here, since not everyone is looking on grabcad. It is a zip file from Grabcad, this includes Solidworks 2016 native files, step assy file and X_T assy file. Hope you guys enjoy and use it to make lots and lots of cool prints for me :) Copy/paste text from Grabcad: The K8200 is not the cheapest printer out there, and it does not print better than the cheaper printers, but because the use of a lot of standard parts like an aluminum...
Topics: Velleman_K8200, k8200_3Drag_Velleman, 3D Printers, thingiverse, Velleman_K8200_3Drag, K8200, 3Drag,...
11
11
Jan 12, 2021
01/21
by
Rafal (rafaljot)
data
eye 11
favorite 0
comment 0
This pulleys give me more precise printing, nearly without backlash issue. In addition I tested them with TMC2100. Due to gear ratio 14 : 24 they give less load to TMC driver, It could produce maximum 1.7A . This combination prints nearly noiseless. I have those setting in Merlin firmware: \#define DEFAULT_AXIS_STEPS_PER_UNIT {115.49, 115.49, 4266.66, 150 } (200\*16)/(19\*2.5)\*(24/14) = 115.49 200 - 1.8' stepper motor (360' / 1.8' = 200) 19 - teeth on pullesy 2.5 - belt type (2.5mm between...
Topics: thingiverse, stl, K8400_Velleman, 3D Printer Parts, Velleman_K8400
5
5.0
Jun 12, 2021
06/21
by
(stoutwind_de)
data
eye 5
favorite 0
comment 0
Summary With this spool holder you can fix most filament spool sizes, avalailable on the market. Its just compatible with the original M6 threaded rod. For installation you need: 4x minitature radial bearing 636 (shielded, sealed or unshielded) 3x hexagon nut M6 the .stl-part "fixer" helps you for quick mount of the loose spool holder. yes we know that there are several solutions that way. Our reasons for this creation were some style facts and some technical aspects like bigger range...
Topics: spool, velleman, spool_holder, Velleman_K8200_3Drag, thingiverse, Velleman_K8200, K8200,...
6
6.0
Jan 20, 2021
01/21
by
Per Hjort (Pady)
data
eye 6
favorite 0
comment 0
I have a lot of 72mm fans lying around, they are quiet and effecient and I thought it was a great idea to utilize one of them. This is an easy to print holder that make it possible to cool the stepper drivers and get rid of the hot air in all directions. It needs some screws and nuts, but it should be clears enough to assemble it. I have not yet printed it!!!! V1.1 The first version printed well and easy, but I had wrong dimensions. I've adjusted it a bit. Now it should fit a little better.
Topics: 3D Printer Parts, velleman, thingiverse, boardgame, Velleman_K8200, 72mm Fan, K8200,...
10
10.0
Apr 30, 2021
04/21
by
Papa Bravo (papabravo)
data
eye 10
favorite 0
comment 0
This is a case for theVelleman Pocket VU Meter Kit MK115 (http://www.velleman.co.uk/contents/en-uk/p41.html) To make use of it, you need to slightly modify the kit in two ways. (1) You need to solder the LEDs at a height of 12mm from the PCB (not flush as in the kit photos/instructions). (2) Cut through one of the copper tracks on the PCB from the battery terminal so that a push switch can be added in series with the battery. This is optional but recommended as without this switch, the battery...
Topics: stl, Sound Meter, Velleman case, VU Meter, Case, MK115, Electronics, thingiverse, Velleman_K8200,...
4
4.0
Apr 12, 2021
04/21
by
Axel Kellermann (branselaner)
data
eye 4
favorite 0
comment 0
Design is not perfect. When it is redesigned i will upload a better version.
Topics: thingiverse, Velleman_K8200_3Drag, velleman, K8200, cover, stl, Velleman_K8200, extruder, 3D...
10
10.0
Apr 26, 2021
04/21
by
Charlie Steurbaut (Charlies3DT)
data
eye 10
favorite 0
comment 0
We made a new design for the Velleman K8200 / 3Drag 3D printer. We used 2 TR8 spindel motors (can be found here: http://www.charlies3dt.com/en/product/nema17-stepper-motor-lead-screw) as new Z-axis. This is more sturdy than the original design! Pictures of prints following soon. We also changed the bed with a MK2 heatbed and we will add a new extruder and some electronics. For questions let me know here or send me a mail webshop@charlies3dt.com
Topics: K8200, velleman, thingiverse, k8200_3Drag_Velleman, Velleman_K8200, Velleman_K8200_3Drag, 3D...
11
11
Jun 20, 2021
06/21
by
Nick Wells (ChiefSwiftNick)
data
eye 11
favorite 0
comment 0
The Heat isolator in the K8400/K8203 extruder has a small PTFE lining tube that needs to be replaced from time to time. It must be replaced by a new sleeve cut to 23.0mm +- 0.15mm. It is a pain to cut this straight and exactly the right length by hand. Just push the sleeve into this guide, then use the ends as a guide and trim with a sharp knife. It will help keep the cuts straight, and the length will be 23mm
Topics: K8400_Velleman, thingiverse, 3D Printer Extruders, stl, Velleman_K8203
2
2.0
Apr 20, 2022
04/22
by
Alessandro Garosi (Brandano)
data
eye 2
favorite 0
comment 0
This is a further refinement of my cable driven Z axis for the K8200 or 3Drag. It uses a cable loop to ensure the Z axis is driven from both ends, and at the same time provides a large degree of "z wobble" isolation, though a severely bent leadscrew will still show up in the print as artefacts in layer height due to small changes in cable tension. The cable I am using is a 3mm thick steel core clothesline, possibly overkill for the task, but works well for me. The mod is complicated,...
Topics: 3D Printer Parts, thingiverse, k8200_3Drag_Velleman, Velleman_K8200_3Drag, K8200, 3Drag, stl,...
5
5.0
Mar 3, 2021
03/21
by
Thomas Neddermann (SurviKnows)
data
eye 5
favorite 0
comment 0
This is an adapter to mount a round MK3 Heatbed on a Velleman K8800. Piezo sensors for automatic bed levelling are protected from heat and should be still fully functional. Its recommended to use a heat resistant filament (PLA might melt we heat bed reaches required temperature). Cork heat shield might not always be requried (depending on temperature).
Topics: velleman_K8800, velleman, DIY, thingiverse, K8800, Heated_Bed, stl
5
5.0
Mar 5, 2021
03/21
by
Per Hjort (Pady)
data
eye 5
favorite 0
comment 0
Made my own mounting plate for my QR extruder. Combine with the top part from the standart mount from Bondtech homepage: https://www.bondtech.se/sv/kundtjanst/utskrivbara-stl-filer/ Works great.
Topics: stl, Velleman_K8200, bondtech, K8200, bondtechQR, 3D Printer Parts, Velleman_K8200_3Drag, velleman,...
5
5.0
Mar 20, 2021
03/21
by
Andreas P (Morpheus61)
data
eye 5
favorite 0
comment 0
If you use 40mm fan duct (http://www.thingiverse.com/thing:672780) like me, you maybe don´t like to have a hole in the bottom of your vertex. Here is a blind cover with Vertex Logo.
Topics: velleman, Velleman_K8400, stl, K8400, 3D Printer Accessories, thingiverse
10
10.0
Jan 13, 2021
01/21
by
Pietro parente (Pietro92)
data
eye 10
favorite 0
comment 0
il nuovo supporto risulta molto più resistente e stabile notando fin da subito i miglioramenti. basta semplicemente sostituire la vecchia staffa con quella nuova!
Topics: thingiverse, stl, motor, Velleman_K8200_3Drag, K8200, 3D Printer Parts, k8200_3Drag_Velleman,...
0
0.0
Aug 14, 2022
08/22
by
Frans W (FransW)
data
eye 0
favorite 0
comment 0
Part to adapt a Panel Mount IEC Connector (Bulgin BVA01/Z0000/11) on a side panel of a Velleman K8400 Vertex 3D printer. You will only need to replace two M5x12 by two M5x16 Hex Socket Cap Screws. By using the associated cap, there 230V ac is safe from your fingers (or inversely)! This has been designed with FreeCAD, what a wonderful software ;-) Tips are welcome, it will encourage me to produce and publish new hardware hacks ... Thanks by advance!
Topics: 3D Printer Accessories, Velleman_K8400, K8400, vertex, stl, thingiverse, velleman
5
5.0
Jun 11, 2021
06/21
by
(stoutwind_de)
data
eye 5
favorite 0
comment 0
Summary A self explaining part for several usages. Let me know if there is the need for modifications in size or adjustment section pattern
Topics: velleman, thingiverse, led_ring, LED, Velleman_K8200, rampage, Stoutwind, stl
10
10.0
Jun 6, 2021
06/21
by
Dylan Van Assche (DylanVanAssche)
data
eye 10
favorite 0
comment 0
With this add-on you can use Marlin's auto bed leveling feature on your Velleman Vertex K8400 3D printer. In order to use this add-on you need to make several changes to your printer: 1. Print the STL's for the servo holder and the micro switch arm. 2. Solder a 2x9 PCB connector with a wire connected to the SS pin of the LCD. This pin isn't in use by any components so we can hijack it for our purpose without soldering on the mainboard. 3. Mount the servo in the holder, solder some wires to the...
Topics: stl, Vertex, thingiverse, Velleman_K8400, 3D Printer Accessories, Velleman, K8400
11
11
Apr 23, 2021
04/21
by
Iwan Jaeger (3DerJaeger)
data
eye 11
favorite 0
comment 0
Velleman K8200 - anti backlash nut ( with thread )
Topics: 3D Printing, Velleman thread, Velleman K8200, anti backlash nut, with thread, Velleman K8200 nut,...
7
7.0
Jun 10, 2021
06/21
by
Timo Hochhaus (dergringo)
data
eye 7
favorite 0
comment 0
TPU Vibration Damping Vibrationsdämpfer Softmount K8400
Topics: Vibration_Damping, velleman, Velleman_K8400, thingiverse, 3D Printing, K8400, stl
9
9.0
Apr 7, 2021
04/21
by
BISCHOFF (bischoffrob)
data
eye 9
favorite 0
comment 0
Roue entrainement extrudeur Velleman K8200 Verifier le moletage de la vis soit bien au centre extrudeur Roue realisee en PLA
Topics: K8200, Velleman, Extrudeur, stl, thingiverse, Velleman_K8200, 3D Printer Accessories
5
5.0
Mar 17, 2021
03/21
by
Ben Zine (Benzine3d)
data
eye 5
favorite 0
comment 0
remix from K8200 SnapIn Allen key set holder(vertical) by Dvogonen __________________________________________________________________________ Just one more hole ;-)
Topics: Velleman_K8200_3Drag, K8200, velleman, 3D Printer Parts, stl, thingiverse
10
10.0
Apr 23, 2021
04/21
by
VellemanStore (vellemanstore)
data
eye 10
favorite 0
comment 0
If you're a maker, hobbyist, or lover of 3d printing you most-likely have a lot of tools. Users of the Velleman K8200 3D Printer know that a great toolkit is essential to 3d printing. The Velleman K8200 Tool Holder is the perfect addition to your printer and will help you keep your tools neatly organized in one easily-accessible place. Print this design quickly and easily using any color filament you want.
Topics: velleman, K8200_3drag, k8200_3Drag_Velleman, Vellemann, 3D_printing, Velleman_K8200_3Drag, stl,...
9
9.0
Apr 22, 2021
04/21
by
Daniele Orso (RDN_ROXAS)
data
eye 9
favorite 0
comment 0
This plastic part enables you to mount a TR8X2 threaded rod on your 3drag/k8200 printer. You can find a very cheap trapezoidal threaded rod kit on aliexpress.com typing "thsl-400-8d". There are 2 versions: V1: You need only self-tapping screws to lock the fz0012 nut on the printed part. V2: You need only M3 screws and nuts to lock the fz0012 nut on the printed part. If you decide to use a TR8X2 threaded rod don't forget to set "steps per mm" to Z:400. Fixed nut hole ! Enjoy...
Topics: k8200_3Drag_Velleman, thingiverse, 3D Printer Parts, stl, Velleman_K8200, Velleman_K8200_3Drag,...
7
7.0
Apr 8, 2021
04/21
by
Phil Hibbs (Hibbsphil)
data
eye 7
favorite 0
comment 0
Dremel 3000 Velleman K8200 CNC Mount. Profiled Rear To Fit Z Axis Precisely. Holes Purposely Made Small So You Can Run A Drill Through For Correct Size. SketchUp File Available.
Topics: cnc, Velleman_K8200, Velleman_K8200_3Drag, stl, thingiverse, Dremel_3000, velleman, dremel, 3D...
10
10.0
Mar 21, 2021
03/21
by
Derek Kirkendall (Djkirkendall)
data
eye 10
favorite 0
comment 0
This is an add-on the to the existing EEZYbotARM Instructable. I needed the claw to rotate, so I whipped this up. Here's what you'll need: 1 x SG90 or MG90S servo 2 x M3 10mm Hex Head Screw 2 x M3 Nuts 1 x servo mount screw for control horn Transfer all of the existing claw parts from the old mount to the new. Here's a video of it in action:https://www.youtube.com/watch?v=B-0GVr1DBs0 Enjoy!
Topics: velleman, sg90, stl, Velleman_K8200_3Drag, EEZYbotARM, mg90s, Robotics, thingiverse
Topics: manualzz, manuals, Velleman, MONCOLHA9
Topics: manualzz, manuals, DTP6, Velleman user manuals, Velleman service manuals, DTP6 pdf download, DTP6...
5
5.0
Apr 12, 2021
04/21
by
Matt Smith (mattster98)
data
eye 5
favorite 0
comment 0
The "L" bracket seemed to allow the bearing to tilt slightly. I noticed black shavings coming off of the belt where it would rub on one of the washers. This uses the same hardware as the L-bracket mount (plus one square nut & screw) and provides support from both sides to prevent it from getting angled.
Topics: thingiverse, Velleman_K8200_3Drag, 3D Printer Accessories, K8200, stl, Velleman_K8200
4
4.0
Apr 13, 2021
04/21
by
Hans-Burton Heathcote (Rudyard_Kipling)
data
eye 4
favorite 0
comment 0
I tried to find a better Y-axis steppermotor mount and all I had seen was for the X-axis or the Z-axis.The original steppermotor mount is replaced by a much stronger and less flexing mounting - including the microswitch hold for the y-axis.
Topics: thingiverse, Velleman_K8200_3Drag, velleman, K8200, stl, 3Drag, 3D Printer Parts
6
6.0
Mar 2, 2021
03/21
by
Pieter Demuynck (M_I_A)
data
eye 6
favorite 0
comment 0
edited original cad files from velleman to replace the small corner brackets. like this you don't need to drill any holes or modify the original structure.
Topics: thingiverse, stl, connector, K8400, Velleman_K8400, 3D Printer Parts, switch, velleman
Topics: manualzz, manuals, K3512, Velleman
Topics: manualzz, manuals, SOL20, Velleman
Topics: manualzz, manuals, HPS10, Velleman
9
9.0
Apr 27, 2021
04/21
by
Jason Chau (Middleman)
data
eye 9
favorite 0
comment 0
This is an Z-axis anti wobble stabilizer that I designed for the Velleman K8200 with the K8204 spindle, which allows you to create smoother looking walls on prints. It fits directly over the Z-axis block end holders and over the Z-axis spindle. Because this is modded you may need to readjust or reprint the bottom Z-motor holder or find equivalent parts that will allow the K8204 spindle to work with the stabilizer like this Z motor holder > http://www.thingiverse.com/thing:144813
Topics: stabilizer, thingiverse, velleman, Velleman_K8200, Velleman_K8200_3Drag, anti-wobble,...
10
10.0
Apr 30, 2021
04/21
by
Francesco Menghini (FrAm3)
data
eye 10
favorite 0
comment 0
This is a good holder for the Z axis regulation screw. The holder is very stable and simple to install. For the installation you need to remove the upper screw put this item and put again the screw. To make it more stable you can insert the screw nut in the bottom hole
Topics: stl, Velleman_K8200_3Drag, 3Drag, 3D Printer Accessories, thingiverse, Velleman_K8200
9
9.0
Apr 27, 2021
04/21
by
S Gust (sgust)
data
eye 9
favorite 0
comment 0
This thing is a mounting bracket to use the E3D Titan extruder on a Velleman K8200 printer. I printed mine with 40% infill, 0.8mm shells in black PLA. It does require 4 mounting screws, two from below, two at the back of the bracket. The rest of printer needs major changes: The layer cooling fan no longer fits, I use two extra 40mm fans left and right to the E3Dv6 hotend connected to a fan holder for the normal cooling fan mounted on the hotend heat-sink. The whole Z axis assembly needs to be...
Topics: K8200, velleman, thingiverse, Velleman_K8200_3Drag, 3D Printer Parts, stl, 3Drag
4
4.0
Mar 21, 2021
03/21
by
Shane Ekerbicer (ozchasers)
data
eye 4
favorite 0
comment 0
I had an issue where the colorfabb filament was unspooling itself from the filament roll and getting jammed as it wrapped itself around the spool holder. Decided to develop this in an attempt to fix the issue. It is a remix of http://www.thingiverse.com/thing:441030 which I added the vertical tower to hold the clip which is secured with a simple cylinder and can be lifted easily. Made the holder longer so it can hold two ColorFabb spools side by side, but the clip is only for the first one. It...
Topics: stl, Velleman_K8200_3Drag, 3D Printer Accessories, Velleman_K8200, thingiverse, K8200
