3
3.0
Jan 3, 2022
01/22
Jan 3, 2022
by
Adam Wilkinson (AdamWilki)
data
eye 3
favorite 0
comment 0
This is a volume pedal for electric guitar. It has been designed to be very strong for a 3D printed pedal and the belted mechanism is consistent and reliable. It also has mounting holes in the back so you can add a 3 pin 6.5mm jack for it to be used as an expression pedal, and there is a hole for a switch so you can switch between the 2 modes. You will need: A short length of GT2 6mm wide belt. A 16 Tooth 6mm wide GT2 pulley with a 6mm bore. 2x 6.5mm mono jacks. Wire 1 or 2 springs - 1"...
Topics: bass, guitar, Expression_pedal, thingiverse, volume, volume_control, stl, Music, electric_guitar
2
2.0
Dec 19, 2021
12/21
Dec 19, 2021
by
Bronislav Haluza (tyfoza)
data
eye 2
favorite 0
comment 0
USB volume control for Windows https://www.instructables.com/Digispark-Volume-Control/ Code and wiring https://learn.adafruit.com/trinket-usb-volume-knob/code I used cheap MCU board Digispark Attiny85. Library "Trinket USB Keyboard" for Arduino IDE. Code is example named TrinketVolumeKnobPlus. I missed the MUTE indication in the original DIY project. The MCU board does not have a free digital pin for software LED switching. I solved it with a flip-flop switched by pressing a rotary...
Topics: thingiverse, volume_control, pc_volume_control, DIY, stl
2
2.0
Nov 19, 2021
11/21
Nov 19, 2021
by
ALEF JONATHAN SILVA (alefjonathan)
data
eye 2
favorite 0
comment 0
I haven't done the print yet, I just cut it to be able to print on my Ender 3. The cut was made respecting the holes and fittings.
Topics: Music, guitar, thingiverse, pedals, volume_control, stl, guitar_pedal, volume
2
2.0
Oct 25, 2021
10/21
Oct 25, 2021
by
Vladimir Shab (GrValdemar)
data
eye 2
favorite 0
comment 0
Собрал реглятор громкости на базе Arduino. https://youtu.be/uVX5ITCd-88
Topics: DIY, thingiverse, volume_knob, arduino, stl, volume_control, volume
2
2.0
Oct 16, 2021
10/21
Oct 16, 2021
by
Gideon Schoonbee (mortolian)
data
eye 2
favorite 0
comment 0
The knob that comes with the speakers doesn't have a very clear notch that shows what the volume is set to. I created this very simple lid you can simply stick on the Logitech Z337 Remote knob to see the volume a little clearer.
Topics: Logitech_Z337, thingiverse, Music, bluetooth_speaker, Speakers, volume_knob, stl, volume_control,...
3
3.0
Sep 11, 2021
09/21
Sep 11, 2021
by
Lorenz Kolling (lezorn)
data
eye 3
favorite 0
comment 0
I did not like the selector knob that came with my amplifier. It did not even match the volume knob. I designed it to match with the Volume knob. Since the shaft on the amplifier is just a keyed shaft like on any common potentiometer this will probably fit other devices as well. Fits on shafts with 6 x 4,5 mm The fit is quite tight you can't accidentally pull it off. If it is too tight, heat up the stem with a lighter and push it in one smooth motion.
Topics: thingiverse, potentiometer_knob, dial, volume_dial, stl, amplifier, volume, volume_knob,...
3
3.0
Sep 4, 2021
09/21
Sep 4, 2021
by
Dustin Hadley (petroleum)
data
eye 3
favorite 0
comment 0
This is the compact deej box I use for the volume controllers I make for my friends. The model is for 10K Ohm Knurled Shaft Linear Rotary Taper Potentiometers and an Arduino nano form factor. Note, the indent on the model fits the pin on the potentiometers. For more information on the project and the things I used, please see the following links. https://github.com/omriharel/deej/releases/tag/v0.9.10...
Topics: stl, thingiverse, Deej, arduino, arduino_case, volume_control, Electronics
3
3.0
Aug 25, 2021
08/21
Aug 25, 2021
by
Brandon Stever (Brando874)
data
eye 3
favorite 0
comment 0
Have a 6mm Shaft Knob for any projects you might need them for. The knob fits a little bit tight but it work on a push pull pot I needed it for.
Topics: electric projects, bass_guitar, thingiverse, amplifier, bass, ardunio projects, guitar,...
2
2.0
Jul 15, 2021
07/21
Jul 15, 2021
by
Mae Stankiewicz (Bigbeau)
data
eye 2
favorite 0
comment 0
Couldn't find an stl of this anywhere, so I modified an existing model to create one. I got tired of losing these things during repairs, now I can just make more. Here's the original model https://grabcad.com/library/nintendo-game-boy-advance-sp-1 Scale it up by 104000% in all axes (lower this if its too loose, vice versa if it's too big). This should be between a snug fit and a snap in, use **reasonable force** when installing. The potentiometers themselves can be fragile, and if you break it...
Topics: gameboy_advance, replacement_part, volume_control, stl, gameboy_advance_sp, volume, thingiverse,...
4
4.0
May 22, 2021
05/21
May 22, 2021
by
Max Siebenschlaefer (threeD_Designer)
data
eye 4
favorite 0
comment 0
Volume Knob with LEDs Not the best idea to use LEDs and not a ring pcb but with some Hot Glue I could fix it. https://youtu.be/xA-sFhvwAYU
Topics: volume_control, volume_button, volume_control_knob, pc_volume_control, volume_dial, thingiverse,...
6
6.0
May 3, 2021
05/21
May 3, 2021
by
(kbz-)
data
eye 6
favorite 0
comment 0
VolumeBox2 (renamed to VolumeMixer2 for easier searching) - A device that controls current app and music player volume in logarithmic fashion via Volume2. Imgur build log: https://imgur.com/a/YufFYAV
Topics: volume_control, volume_button, PC_Volume, deej, arduino, PC_Volume_Controller, PC_Volume_Controll,...
3
3.0
Apr 29, 2021
04/21
Apr 29, 2021
by
fsdfsd fsdfsdaf (zbyskie)
data
eye 3
favorite 0
comment 0
VolumeBox2 (renamed to VolumeMixer2 for easier searching) - A device that controls current app and music player volume in logarithmic fashion via Volume2. Imgur build log: https://imgur.com/a/YufFYAV
Topics: volume_control, PC_Volume, volume_mixer, PC_Volume_Controller, PC_Volume_Controll,...
3
3.0
Apr 27, 2021
04/21
Apr 27, 2021
by
Patrick Wulfert (wpatrick)
data
eye 3
favorite 0
comment 0
I've created a new USB Volume Knob, that fits for a simple rotary encoder and a Digispark ATtiny85 with micro USB. If you have a rotary encoder with 20mm half handle, to avoid the volume knob is becoming very high, the semicircular mount on the rotary encoder must be shortened by approx. 4mm.On the aother hand, you can take a rotary encoder with 15mm half handle. You can find instructions, the sketch and the wiring diagram under: https://learn.adafruit.com/trinket-usb-volume-knob/wiring You...
Topics: volume_control, Electronics, Digispark, thingiverse, volume_knob, attiny85, stl
4
4.0
Feb 14, 2021
02/21
Feb 14, 2021
by
Alex (Xtreme_3D)
data
eye 4
favorite 0
comment 0
That is a simple Volume button form the skala 1 to 10.
Topics: thingiverse, no_support, volume_button, Replacement Parts, educational, Solidedge, button, stl,...
5
5.0
Feb 4, 2021
02/21
Feb 4, 2021
by
Jelle Schepens (moxl)
data
eye 5
favorite 0
comment 0
# Arduino Pro Micro Volume controller. # (5v version) Acts as a second keyboard which is programmable for media control Including volume for under 10€/$ ** Check my Github for the code: ** https://github.com/moxl-420/USB-Arduino-Media-Controller ** Items needed: ** * 1x Arduino Pro Micro 5v * 1x Breadboard 3cmX7cm * 4x 10Kohm resistors * 4x High profile tactile button. * 1x 10K Potentiometer. * 7x M3 10mm nut and bolt ** Printing:** * Printed in Sunlu PLA+ * 220C nozzle 0.4mm @ 0.2 resolution...
Topics: 3D Printing, thingiverse, keyboard, arduino, volume_knob, media, stl, volume, volume_control
4
4.0
Jan 22, 2021
01/21
Jan 22, 2021
by
Ueli Kampfheli (ueliheli)
data
eye 4
favorite 0
comment 0
A simple Volume Knob for Syba sonic/Logilink DAC. Fits good is easy to print with no supports.
Topics: volume_control, gaming, thingiverse, Audio, volume_knob, volume, hifi, dac, stl
Bell System Technical Journal, 40: 3. May 1961 pp 649-668. Functional Design of a Voice-Switched Speakerphone. (Clemency, W.F.; Goodale, W.D. Jr.)
Topics: transmit, gain, loudspeaker, receive, signal, control, speech, speakerphone, microphone, volume,...
3
3.0
Dec 9, 2020
12/20
Dec 9, 2020
by
Efraín M.C. (putzfraumann)
data
eye 3
favorite 0
comment 0
I did not like the body 77rick77 made. But the frontplate was just awesome. So i build a new body which can be print without support. Just put in on your slicer with bottom to bottom. Print Settings: 3 Walls 4 Top 4 Bottom 20% infill No Supports Remix from: https://www.thingiverse.com/thing:4598978 Enjoy !
Topics: mmu, PC Volume Control, deej, snr_tech_bytes, mmu2, Computer, thingiverse, PC Volume, PC Volume...
4
4.0
Nov 15, 2020
11/20
Nov 15, 2020
by
Marcel Israfilov (Marcelieboy)
data
eye 4
favorite 0
comment 0
I took the inspiration from daggr for the design. I could've just used his, but I wanted to try and design it myself. The original idea however is from [github](https://github.com/omriharel/deej) , there you can find the code and a more detailed instruction The parts I used: - five 10k ohm potentiometers - an arduino nano - some cables and soldering tools To make the print with 2 colors with a single extruder/filament printer I aligned the different STLs in my slicer and then exported them...
Topics: stl, Computer, deej, Arduino_Nano, thingiverse, volume_control, volume_knob
4
4.0
Oct 31, 2020
10/20
Oct 31, 2020
by
Simon Staudacher (AbbyTheGryphon)
data
eye 4
favorite 0
comment 0
My design for an amp style deej mixer. Yes its beefy xD. I used ruthex M4 threaded inserts(No.1) for mine, but i also uploaded a version with modeled M4 threads(No.2) and holes to cut the M4 threads with a screw or tap(No.4). The arduino holder is meant for an arduino nano, with a "mini usb" plug. I used the one from AZDelivery on amazon https://www.amazon.de/gp/product/B078S8BJ8T/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 Deej software and arduino sketch:...
Topics: volume_control, stl, Computer, deej, computer, audio_mixer, thingiverse
3
3.0
Oct 29, 2020
10/20
Oct 29, 2020
by
Dustin Schndler (UsefulMind)
data
eye 3
favorite 0
comment 0
Das ist ca der Lautstärkeknopf von dem Motorola MTP3550 Funikgerät. Ich habe den Knopf und das Funkgerät, habe davon die maße genommen und mit leichten Tolleranzen gezeichnet. Aufgrund meiner (bisher) schlechten Druckergebnissen und meiner Erfahrung aussließlich mit PLA, suche ich noch jemanden, der die Datei mal drucken mag und mir eine Rückmeldung über die Maßhaltigkeit gibt. Für Verbesserungen, kontaktiert mich bitte.
Topics: volume_control, MTP, stl, MTP3550, TETRA, thingiverse, volume, volume_knob, Electronics,...
4
4.0
Oct 19, 2020
10/20
Oct 19, 2020
by
Ofir Temelman (OfirT)
data
eye 4
favorite 0
comment 0
This is a WIP. Over the next few weeks i will upload more detailed instructions, as well as pictures and a parts list. I was annoyed with having many features my OS hidden behind tons of obscure keyboard shortcuts, and wanted to make custom features/ macros of my own outside of my "normal" keyboard, thus I created this programmable macro keyboard, including 9 Cherry MX switches and a rotary encoder, which also reacts to click, double click, for a total of 14 distinct commands! I...
Topics: macro, volume_control, macro_keyboard, stl, macropad, macropad_keyboard, Macro_Key, thingiverse,...
4
4.0
Sep 17, 2020
09/20
Sep 17, 2020
by
Rick Herriman (77rick77)
data
eye 4
favorite 0
comment 0
This is my PC Volume Controller based of of the Deej Project. Instead of potentiometer it uses 5 click encoders allowing for volume control and a mute button on each channel! It runs off of an arduino mkrzero and also uses neopixels for the backlights. Youtube: https://youtu.be/pkEw7x2GMIA Github: https://github.com/SNR-Tech-Bytes/deej_encoder
Topics: stl, pc volume control, Computer, deej, mmu2, mmu, snr tech bytes, thingiverse
3
3.0
Aug 13, 2020
08/20
Aug 13, 2020
by
(tonpa888)
data
eye 3
favorite 0
comment 0
This is a remix of the original MaxMix using M3 screws instead of M2. The Bottom is screwed to the Top part using 4 M3x20mm countersunk screws, for everything else I used M3x10mm slotted panhead screws. To hold the OLED screen, I printed a simple block which has a strip of soft foam glued to the slanted top face. I made my own powerbar by just soldering all my positive and negative wires together and shrink wrapping them, so I removed the stems in order to create more space. I used this...
Topics: sound controller, thingiverse, audio mixer, audio, volume control knob, volume knob, volume dial,...
3
3.0
Aug 12, 2020
08/20
Aug 12, 2020
by
(DruciferRedbeard)
data
eye 3
favorite 0
comment 0
I made this enclosure and knobs for the excellent [deej project](https://github.com/omriharel/deej). My sliders ended up being a different size than the other models and I wanted an enclosure that had no visible screws. Knob was remodeled from scratch but I used the bottom pattern from ezremek's knobs because it fit my sliders well. I added color changes at 6.4 and 7.0mm (on the inset-mark file). The stabilizer file supports the back of the sliders without needing to screw them in. I have...
Topics: thingiverse, slider, deej, fader_knob, Audio, volume, volume_knob, fader, stl, volume_control
5
5.0
Jul 31, 2020
07/20
Jul 31, 2020
by
Austin G (HeWhoMakes)
data
eye 5
favorite 0
comment 0
Slim box designed to fit an Arduino Nano and 5 rotary potentiometers (https://www.amazon.com/gp/product/B07QT1BTLJ/ref=ppx_yo_dt_b_asin_title_o09_s01?ie=UTF8&psc=1) for use with the Deej github project (https://github.com/omriharel/deej). Mount it anywhere you have room, I placed mine under my desk to keep my surface clear. Side note, this should fit under an NZXT H500 or similar case. Things to do: - recalculate the Arduino length, some slight interference fit currently (probably missed a...
Topics: deej, stl, thingiverse, Computer, volume_knob, volume_control
5
5.0
Jun 14, 2020
06/20
Jun 14, 2020
by
Jimmy Goodsell (nightfox939)
data
eye 5
favorite 0
comment 0
This is a linear slider box to be used in conjunction with the software deej. Deej is software to control individual program volumes in Windows and Linux. Deej interfaces between windows using an arduino device and taking analog inputs from the arduino and mapping them to windows programs. More can be found about Deej at the Github below: https://github.com/omriharel/deej This box is meant to be used as a desktop device, and holds 7 linear sliders to control volumes. Personally mine is mapped...
Topics: volume_knob, volume_control, stl, thingiverse, volume, deej, Computer
5
5.0
Mar 1, 2020
03/20
Mar 1, 2020
by
Stefan Haid (Stevetecx)
data
eye 5
favorite 0
comment 0
Inspired from this cool thing: https://blog.prusaprinters.org/3d-print-an-oversized-media-control-volume-knob-arduino-basics/ and the cool Media Knob Projects from https://www.thingiverse.com/FrankLumien I also wanted a Media Knob. So i buy the eletronics: Pro Micro Modul mit ATmega32U4, like Arduino Leonardo Board, 5V, 16MHz https://www.amazon.de/gp/product/B01D0OI90U/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 1x KY-040 Rotary Encoder...
Topics: arduino, micro_usb, dial, Computer, thingiverse, media, media_dial, volume_control, control,...
5
5.0
Dec 15, 2018
12/18
Dec 15, 2018
by
James Eckert (jeplans)
data
eye 5
favorite 0
comment 0
Sometime you need to screw a pot to the wall for line level volume control Screws Nuts and Washers are #6-36 3/8" the Pot's round bottom is about 17mm x 9mm Link: https://www.tinkercad.com/things/9nmKcZkTAaN If like what you see, and want to help encourage me to continue sharing free 3D printing designs be sure to Tip Me. Thanks, James
Topics: potentiometer, pot, line level, Electronics, thingiverse, enclosure, stl, volume_control,...
6
6.0
Oct 6, 2018
10/18
Oct 6, 2018
by
Simon C (clubclay)
data
eye 6
favorite 0
comment 0
I love the crisp, rich sound of the uncompressed USB Audio coming from the powered AudioEngine A2+ speakers, it's on board DAC is excellent. However, the small form factor means the volume on/off control is around the back, hard to reach, and given how loud these speakers can get, prone to leaping up too high as you try and adjust the volume a little. What I wanted was an easy to reach way to adjust the volume - I took the speaker apart, but the volume potentiometer was buried deep and glued...
Topics: Audio, volume_control, stl, thingiverse, audioengine, volume_knob, audioengine_a2
6
6.0
Sep 26, 2018
09/18
Sep 26, 2018
by
なつみ 大江 (natsu300e)
data
eye 6
favorite 0
comment 0
半固定抵抗器が小さくて使いづらいので、大きくしました。 円筒は円筒と、四角いのは四角いのと、接着剤でくっつけて下さい。
Topics: volume_control, arduino, volume, thingiverse, stl, volume_dial, Parts
7
7.0
Jul 13, 2018
07/18
Jul 13, 2018
by
Nicco Reyes (niccoreyes)
data
eye 7
favorite 0
comment 0
Here is my take on building an open source volume control knob with editing or other shortcut profiles. This means you can control the volume, play and pause music, scrub through your timeline, cut layers, adjust brush sizes and many more all in one. I assigned 4 functions in the knob: 1. for rotating clockwise or counter clockwise 2. single pressing the encoder switch (play pause music/timeline) 3. double pressing (extra function for editing like cutting the layer 4. hold to toggle between...
Topics: arduino, volume_button, rotary encoder, volume dial, thingiverse, attiny85, volume control, volume...
8
8.0
Jun 18, 2018
06/18
Jun 18, 2018
by
Frank Lumien (FrankLumien)
data
eye 8
favorite 0
comment 0
Small, cheap media controller that plugs into your computer, phone, tablet or any other device that supports USB media controls. I've personally tested it with Windows 10 and Android 6, if you test it with anyhing else, please share your results. :) **Functions** Knob: Turn to change **volume**, press to **mute** Big button: **Play/pause** Small buttons: **Previous** & **Next** track These can all be changed in the included source. Uses a standard Micro USB cable. Basic soldering required,...
Topics: Windows_10, sound_controller, android, media_controller, volume_control, stl, volume_control_knob,...
10
10.0
Mar 15, 2018
03/18
Mar 15, 2018
by
Austin (ColdWarPatriot)
data
eye 10
favorite 0
comment 0
Mini Audio mixer with 2 stereo in, 1 mono in, and 1 stereo out. 3.5mm jacks. Plans and more details here : http://therandomlab.blogspot.com/2015/05/simple-passive-monostereo-to-stereo.html This one does not match the schematic exactly. It has two stereo channels and one mono channel into one stereo out. Used 10K potentiometer, 1K resistors, and 1uF Capacitors. The 3.5mm socket are "5-Pack CESS 3.5mm Stereo Balanced TRS Socket Female Connector Panel Chassis Mount (#318: 3.5mm Stereo...
Topics: 3.5mm, Audio, line_level_mixer, mono_sound, resistor, mono, passive, mixer, volume_control, stl,...
9
9.0
Sep 20, 2017
09/17
Sep 20, 2017
by
MATTHEW SHOUP (simplyflipflops)
data
eye 9
favorite 0
comment 0
I make quite a few audio circuits for fun. One module I always seem to need is the input jacks with a volume knob. I didn't want to have to rewire this circuit all the time for my Class A amplifiers and though I could build a little module to handle it. I used banana jacks on the output for ease of insertion with other modules that follow in the audio chain. The squares on the bottom are for LRFs (little rubber feet).
Topics: electronics module, electronics, Electronics, thingiverse, audio, Banana jacks, volume control,...
13
13
May 30, 2017
05/17
May 30, 2017
by
Gediminas Jurgaitis (Vandalisimo)
data
eye 13
favorite 0
comment 0
Not much to say about it, just a copy of fender stratocaster volume and tone knobs. I would recommend to print it smallest possible nozzle. 0.2 would be best. I did not tried to print wit 0.1 nozzle, but it would be even better. 0.3 also would do the job. no supports needed if you print it as it is.
Topics: volume control knob, thingiverse, tone_knob, 3D Printing, stl, guitar_knob, volume_knob
12,902
13K
texts
eye 12,902
favorite 0
comment 0
Arcade Game Manual for Pachislo Yamasa from Stealth Home Amusement. Includes parts list, illustrated diagrams, cabinet description, error message table, and troubleshooting faq. From Stealth Home Amusement, 1150 University Ave., Rochester, NY 14607.
Topics: reset, stealth, amusement, Manual, Arcade\n, copyright, button, odds, hopper, pachislo, power,...
459
459
Apr 21, 2004
04/04
Apr 21, 2004
by
http://www.octiv.com
software
eye 459
favorite 1
comment 0
This is the first audio plug-in available for iTunes. It improves the quality of your listening experience by digitally remastering your audio in real time with the same technology used by the pros. The plug-in incorporates a state-of-the-art five-band dynamics processor that examines and corrects your audio thousands of times a second. Low levels are intelligently raised and loud signals are kept under control, all in real time.
Topics: Volume Logic, Multimedia, Audio, Volume control, Volume Logic
161
161
Jan 23, 2003
01/03
Jan 23, 2003
by
http://www.rosecitysoftware.com/AudioSliders/
software
eye 161
favorite 0
comment 0
This audio control utility includes a volume control replacement that is five times smaller than the Windows version. It provides hotkey control for the most popular CD and MP3 players, including WinAmp, Sonique and Quintessential CD. Mixer settings can be saved for specific projects. A built-in CD player is also included.
Topics: Audio Sliders, Multimedia, Audio, Volume control, Audio Sliders, audiosliders, audio slider,...
217
217
Apr 13, 2002
04/02
Apr 13, 2002
by
http://www.reallyeffective.co.uk
software
eye 217
favorite 0
comment 0
This applet works together with most of the features of the standard Windows mixer. It also lets you add hot keys to adjust any combination of sound mixer volumes.
Topics: Sound Control, Multimedia, Audio, Volume control, Sound Control Plus
183
183
May 31, 2001
05/01
May 31, 2001
by
http://www.svet-soft.com/audio.html
software
eye 183
favorite 0
comment 0
AudioSphere allows you to control volume, balance, treble and base on your audio player. Additional features include color customization, pre-sets and the ability to save the position on the screen automatically.
Topics: AudioSphere, Multimedia, Audio, Volume control, AudioSphere, Miscellaneous Audio, Audio
107
107
May 17, 2001
05/01
May 17, 2001
by
http://www.shelltoys.com/zvolume
software
eye 107
favorite 0
comment 0
ZVolume Pro is a replacement for the standard volume control. You can configure it to have control over any input or output available. You control audio volume, recording volume and voice command volume, and each of these categories has multiple controls you can activate. Some features include: Hotkeys volume control Universal hotkeys control for Winamp, Sonique, NAD, Wplay, Windows CD Player and MS Internet Explorer One-hundred percent Win32 API code A very diminutive screen size (68x14...
Topics: ZVolume Pro, Multimedia, Audio, Volume control, miscellaneous audio, audio, volume, db, decibal
198
198
texts
eye 198
favorite 0
comment 0
Arcade Game Manual for Point Blank, an arcade game by Namco. Include troubleshooting notes.
Topics: pozi, receptacle, speaker, \nArcade Manuals, Arcade\n, remove, emi, rack, screw, toothed, head,...
This is everything I know or could find out about doing a small Do It Yourself punk independent show. It is way too much Information, but I wanted to make sure that few questions went unanswered.
Topics: bands, band, sound, mics, mixer, flyers, punk, itis, mic, call, sound system, volume control, good...
442
442
Aug 1, 1990
08/90
Aug 1, 1990
texts
eye 442
favorite 0
comment 0
Arcade Game manual for Pig Skin, an arcade game by Midway. Includes gameplay description, parts list, conversion instructions, self test instructions, dip switch settings, troubleshooting notes, cpu board diagram, joystick assembly diagram, audio board diagram, pin out diagram, audio board schematic, joystick opto board schematic, cpu schematics, wiring diagrams, jumper settings, and coin switch wiring diagram. Part no. 16-4004-K-101. From Midway Manufacturing Company, 3401 N. California...
Topics: jamma, board, pigskin, \nArcade Manuals, Arcade\n, cable, cpu, pin, switch, coin, video, game,...
592
592
texts
eye 592
favorite 0
comment 0
Installation & service manual for Apache-3, model 1US39, by Data East USA, licensed from Tatsumi. General information (including installation & setup), game information, replacement parts lists, and schematic diagrams. By Data East USA, Inc., 470 Needles Drive, San Jose, CA 95112.
Topics: molex, coin, game, Arcade game manual, video game, jst, apache, harness, power, instructions, pcb,...
Topics: data, electronics, free, fax, digital, electronic, mhz, pin, circuit, power supply, toll free,...
Topics: circuit, electronics, free, output, signal, video, disk, frequency, pin, cable, power supply, toll...
Computist issue #33. Includes Word Juggler softkey by John Nice, Tink! Tonk! softkey by Pete Ashdown, Sundog v2.0 softkey by Marc Lirette, G.I. Joe & Lucas Film's Eidolon softkeys by Larry Rando, Summer Games II softkey by Matt Evans, Thief softkey by Paul Wilson, Instant Pascal softkey by Jonathan Maiara and Jeff Lucia, World's Greatest Football Game softkey by Charles S. Taylor, How to Be the Sound Master by William Wingfield Jr., The Mapping of Ultima IV by Jim S. Hart and Ray Darrah,...
Topics: disk, computist, dos, Hardcore Computist, Computist, Apple II, Deprotection, Cracking, apple,...
401
401
May 14, 1984
05/84
May 14, 1984
texts
eye 401
favorite 0
comment 0
Instruction manual for Mystic Marathon, by Williams, Inc. 16-3008-101. Includes ROM summary, conversion kit K1 information for DEFENDER, K-1 conversion kit parts list, conversion kits K2 and K3, power-on information, game operation, bookkeeping totals, exclusive game-adjustments, game pricing, diagnostic tests, outline of built-in test procedures, RAM error codes, sound self-test. From Williams, Inc. 3401 North California Avenue, Chicago, IL 60618.
Topics: cpu, marathon, cable, circuitboard, crt, mystic, pcb, game, required, assembly, parts list, factory...
