Skip to main content

Full text of "Stryker Renaissance Series 1212 Emergency Care Stretcher Maintenance Manual"

See other formats


Renaissance Series 


1212 Emergency Care Stretcher 


Maintenance Manual 



For Parts or Technical Assistance 
800 - 327-0770 























Table of Contents 


Introduction 

Specifications. 3 

Warning / Caution / Note Definition. 3 

Preventative Maintenance 

Cleaning . 4 

Biannual Checklist. 4 

Service Information 

Caster Assembly Replacement. 5 

Caster Cover Installation And Removal. 6 

Pneumatic Fowler Adjustment. 7 

Brake Cam Replacement. 7 

Brake Ring Replacement. 8 

Base Side Control Pedal Linkage Adjustment. 8 

Jack Replacement. 9 

Hydraulic System Troubleshooting. 10 

Checking Hydraulic Fluid Level. 11 

Jack Descent Rate Adjustment. 11 

Hydraulic Check Valve Replacement 

Replacement Of Valve #1 . 12 

Replacement Of Valve (Poppet) #2. 13 

Removal Of Excess Air (Vacuum) From The Hydraulic System . 13 

Brake Adjustment . 13 

Base Lubrication Points . 14 

Assembly Drawings and Parts Lists 

3-Sided Control Base Assembly, Both Sides & Foot End . 15-17 

3- Sided Control Base Assembly, Both Sides & Head End. 18-20 

4- Sided Control Base Assembly. 21-23 

Jack Assembly. 24, 25.1 

Jack Base Assembly. 25, 25.2 

Brake Adjuster Assembly. 26 

Brake Cam Assembly. 27 

End Pump Pedal Assembly, Head . 28 

End Pump Pedal Assembly, Foot. 28 

Side Release Pedal Assembly, Right. 29 

Side Release Pedal Assembly, Left . 29 

Side Pump Pedal Assembly. 30 

Caster Assembly with Steerlock . 31 

Caster and Caster Cover Replacement Kits. 32 

Fifth Wheel Assembly. 33 

3-Sided Base Graphics, Foot End Control . 34 

3- Sided Base Graphics, Head End Control . 35 

4- Sided Base Graphics . 36 

Litter Assembly, Fold to Head Siderails. 37 

Siderail to Litter Assembly, Fold to Head. 38 

Glideaway™ Siderail Assembly, Right . 39 

Glideaway™ Siderail Assembly, Left . 40 

Head End Siderail Latch Option Assembly . 41 

Push Handle Option Assembly . 42 

Push Handle Assembly. 43 

Stationary Foot End Assembly . 44 

















































Table of Contents 


Assembly Drawings and Parts Lists (Continued) 

Knee Gatch Frame Assembly . 45 

Crank Knee Gatch Assembly. 46 

Knee Gatch Crankscrew Assembly . 47 

Pneumatic Fowler to Frame Assembly . 48 

Pneumatic Fowler Assembly . 49 

Crank Fowler Assembly . 50 

Fowler Crankscrew Assembly. 51 

Head End Push Bar Assembly . 52 

2-Stage I.V. Mounting Assembly . 53 

2- Stage I.V. Pole Assembly. 54 

3- Stage I.V. Mounting Assembly . 55 

3-Stage I.V. Pole Assembly. 56 

2nd Stage Assembly. 57 

3rd Stage Assembly . 58 

Tethered I.V. Pole Mounting Assembly. 59 

Tethered I.V. Pole Trough Assembly. 60 

Tethered I.V. Pole Assembly . 61 

I.V. Holder Assembly. 62 

Fowler X-Ray Cassette Assembly. 63 

X-Ray Cassette Mounting Assembly. 64 

Foot Board/Chartholder Assembly . 65 

Upright Oxygen Bottle Holder Assembly . 65 

Foot Extension/Defibrillator Tray Assembly. 66 

Defibrillator Tray Assembly . 67 

Heel Stirrup and Support Assembly . 68 

Right Stirrup Support Assembly . 69 

Left Stirrup Support Assembly. 70 

Heel Stirrup Assembly . 71 

C-Spine Cassette Holder Assembly. 72 

C-Spine Support Pole Assembly . 73 

C-Spine Storage Bracket Assembly. 74 

Replacement Parts . 75 

Limited Warranty 

Obtaining Parts and Service . 76 

Supplemental Warranty Coverage . 76 

Return Authorization . 77 

Freight Damage Claims . 77 








































Introduction 


INTRODUCTION 

This manual is designed to assist you with the maintenance of the 1212 Emergency Care Stretcher. Read 
it thoroughly before using the equipment or beginning any maintenance on it. 


SPECIFICATIONS 


Maximum Weight Capacity 

500 pounds 

Overall Bed Length \ Width 

83 1/2” \ 31 1/2" 

Minimum \ Maximum Bed Height 

22735.5" 

Fowler Angle 

Oto 90° 

Knee Gatch Angle 

Oto 30° 

Trendelenberg \ Reverse Trendelenberg 

+18° to -18° 


WARNING / CAUTION / NOTE DEFINITION 

The words WARNING, CAUTION and NOTE carry special meanings and should be carefully reviewed. 


WARNING 

The personal safety of the patient or user may be involved. Disregarding this information could result in injury 
to the patient or user. 


CAUTION 

These instructions point out special procedures or precautions that must be followed to avoid damaging the 
equipment. 


NOTE 

This provides special information to make maintenance easier or important instructions clearer. 


WARNING 

Patients should be discouraged from sitting directly on the ends of the stretcher. Excessive weight will cause 
the litter surface to tip up, possibly causing patient injury. 


3 













Preventative Maintenance 


CLEANING 

1. Hand wash all surfaces of the bed with warm water and mild detergent. Dry thoroughly. 

2. Clean Velcro AFTER EACH USE. Saturate Velcro with disinfectant and allow disinfectant to evaporate. 
(Appropriate disinfectant for nylon Velcro should be determined by the hospital.) 

NOTE 

Quaternary Germicidal Disinfectants, used as directed, and/or Chlorine Bleach products, typically 5.25% So¬ 
dium Hypochlorite in dilutions ranging between 1 part bleach to 100 parts water, and 2 parts bleach to 100 
parts water are not considered mild detergents. These products are corrosive in nature and may cause dam¬ 
age to your stretcher if used improperly. If these types of products are used to clean Stryker patient handling 
equipment, measures must be taken to insure the stretchers are rinsed with clean water and thoroughly dried 
following cleaning. Failure to properly rinse and dry the stretchers will leave a corrosive residue on the surface 
of the stretcher, possibly causing premature corrosion of critical components. Failure to follow the above 
directions when using these types of cleaners may void this product’s warranty. 


BIANNUAL CHECKLIST 

_ All fasteners secure 

_ Siderails move and latch properly 

_ All casters lock with brake pedal engaged 

_ Steer function working properly 

_ All casters secure and swivel properly 

_ Body restraints working properly 

_ I.V. pole intact and operating properly 

_ Oxygen bottle holder intact and operating properly 

_ Fowler operates and latches properly 

_ Knee Gatch operates properly 

_ Trendelenberg/Reverse Trendelenberg operating properly 

_ No rips or cracks in mattress cover 

_ Transfer boards intact and operating properly 

_ Arm board support levers intact and operating properly 

_ Ground chain intact 

_ No leaks at hydraulic connections 

_ Hydraulic jacks holding properly 

_ Hydraulic drop rate set properly 

_ Hydraulic oil level sufficient 

_ Lubricate where required, including the brake adjuster assembly and brake cam 


Serial No. 


Completed By: 


Date: 


4 



Service Information 


CASTER ASSEMBLY REPLACEMENT* 
Required Tools: 

1/8 Roll Pin Punch 

Flat Punch (any size larger than 1/8) 

Needle Nose Pliers 
3/4 Inch Wrench 
1 Inch Wrench 


Drill with 1/8 inch Drill Bit 
Hammer 
Floor Jack 
Bungee Cords 

Torque Wrench (w/ Ft. Lbs. Adjust.) 


Replacement Procedure: 

1. Pump the litter up to full height. 

2. Lift the base hood, separating the hood from the base frame. Using the bungee cords, support the base 
hood. 

3. Using a 1/8 roll pin punch and hammer, remove roll pin located in center of lug nut holding wheel assembly 
to base frame. 

4. Carefully remove plastic wheel covers. 

5. Using a floor jack, lift base frame approximately 4 inches off the ground. 

6. While holding cap screw with a 3/4 inch wrench, turn lug nut with a 1 inch wrench to loosen wheel assembly 
from base frame. Remove wheel. 

7. Install the new wheel assembly with new lug nut and tighten down to 60 - 65 foot-pounds torque. 


WARNING 

Never reuse the old lug nut, cap screw or roll pin once removed from base frame. 

8. Lower the floor jack and set aside to be used, if needed, with another wheel. 

9. Drill a 1/8 hole in center of lug nut, going completely through the lug nut. 

CAUTION 

Be careful not to ’’oblong” the hole in the lug nut when drilling. 

10. Using needle nose pliers, hold on to roll pin and tap into place. Finish driving roll pin with a flat head punch 
and a hammer until flush with the lug nut. 

11. Install plastic wheel covers onto wheel. 

12. Remove the bungee cords supporting the base hood and secure the hood to the base frame. 

*See page 32 for caster and cover replacement part numbers. 


1/8 Inch 




5 




Service Information 


CASTER COVER INSTALLATION AND REMOVAL 


© 



Push with palm on cover until 
double prongs engage. 


Looking through the larger of the two side cut-outs, 
align cover with axle nut or bolt head, as shown. 
Push down on the opposite side of the cover until 
single prong engages with caster horn. 





To remove wheel cover, insert large screwdriver into cut-out in 
side of wheel cover and into the space between the double prongs. 
Pry up cover to disengage double prongs and push sharply upward 
to disengage single prong. 


Top View (Cut-Away) 


6 





Service Information 


PNEUMATIC FOWLER ADJUSTMENT 
Required Tools: 

5/32" Hex Allen Wrench 1/2” Open End Wrench 

Adjustment Procedure: 

1. Refer to drawing 1210-31-120 (Pneumatic Fowler Assembly, page 49) for parts reference. 

2. For easier access, move Fowler to 75 degrees or higher. 

3. Using a 1/2” open end wrench, loosen the nuts (item K) in the actuator arms on the end of the trip bar (F). 

4. To adjust the Fowler, use a 5/32” hex Allen wrench to turn the Allen screws (item N) 1 to 2 turns counter¬ 
clockwise if the Fowler will not move or 1 to 2 turns clockwise if the Fowler will not hold its position. 

5. Retighten the nuts. Be sure the Fowler will travel from flat to 90° and down again and will hold its position 
when weight is applied before returning the stretcher to service. 


BRAKE CAM REPLACEMENT 

Brake Cam Part Number 715-1-213 

Required Tools: 

Phillips Screwdriver String or Bungee Cord 3/32” Allen Wrench 

1/8" Allen Wrench 

Procedure: 

1. Remove the four Phillips screws holding the base hood to the frame. Lift and support the base hood using 
string or bungee cord. 

2. Using a 3/32” Allen wrench, loosen the set screw holding the brake adjuster to the brake ring and turn the 
adjuster clockwise to remove it. 

3. Using a 1/8” Allen wrench, remove the shoulder bolt and nut holding the brake link on the cam and remove 
the cam. 

4. Reverse steps 3 and 4 to install the new cam. Apply and release the brakes to assure they operate properly. 
If adjustment is required, see page 13. Reinstall the base hood. 


7 




Service Information 


BRAKE RING REPLACEMENT 

Brake Ring Part Number 715-1-61 


Required Tools: 

Phillips Screwdriver String or Bungee Cord 

Large Standard Screwdriver 3/32" Allen Wrench 

5/8” Wrench Needle-Nose Pliers 

Procedure: 


Floor Jack, Small Crate (or equiv.) 
11/16” Socket & Ratchet 
(2) 7/16” Wrenches 


1. Remove the four Phillips screws holding the base hood to the frame. Lift and support the base hood using 
string or bungee cord. Put the brake/steer pedal in the neutral position. Lift the end of the base needing 
service until the casters are approximately 12” off the floor and support it with a jack or the equivalent. 

2. Using a 3/32” Allen wrench, loosen the set screw holding the brake adjuster to the brake ring and turn the 
adjuster clockwise to remove it. 

3. Remove the wheel covers on both casters (see page 6). 

4. Remove one of the caster assemblies (see page 5). On the other caster, use an 11/16” socket and ratchet 
and a 5/8” wrench to remove the nut and bolt holding the wheel on the caster horn and remove only the 
wheel. 

5. Using needle-nose pliers, carefully squeeze and remove the spring between the brake cam and the brake 
ring. 


WARNING 

The spring is tightly compressed. Use caution when removing it or personal injury could result. 


6. If you are working on an end control base, remove the spring from the pump pedal. 

7. Lower the brake ring and remove it from the base. Remove the brake pads and bushings and install them 
on the new brake ring. 

8. Reverse the above steps to install the new brake ring and reinstall the caster and wheel. Apply and release 
the brakes to assure they operate properly. If adjustment is required, see page 13. Reinstall the base 
hood. 


BASE SIDE CONTROL PEDAL LINKAGE ADJUSTMENT 
Required Tools: 

3/8" Wrench 5/32" Hex Allen Wrench 7/16” Wrench 

Bungee Cords 

Adjustment Procedure: 

1. Place 150-200 pounds on the litter and pump the litter up to full height. 

2. Lift the base hood, separating the hood from the base frame. Using the bungee cords, support the base 
hood. 

3. Using a 3/8” wrench and a 5/32” hex Allen wrench, loosen the appropriate pedal linkage adjustment nut 
until the jack stops "drifting”. Raise the litter to full up. 

4. Tighten the pedal linkage adjustment nut until the jack begins to slowly descend. 

5. Using a 7/16” wrench, back the pedal linkage adjustment nut out four full turns. Raise the litter to full up. 

6. Loosen the pedal linkage adjustment nut and ensure no drift occurs. If the jack drifts, repeat procedure. 




Service Information 


JACK REPLACEMENT (WITHOUT COMPRESSION SPRING) 

Required Tools: 

3/8” Wrench 1/2” Socket 1/2" Wrench 

Needle-Nosed Pliers 

Replacement Procedure: 

1. Apply stretcher brakes. Raise litter to full up. Raise Fowler to full up and raise siderails. 

2. Use a 3/8” wrench to remove the bolt in the litter support tube above black bellows on both ends. 

3. With the assistance of another person, lift off the stretcher litter and set it aside, taking care not to damage 
the siderails, etc. 

4. Push down on the jack actuator to put the jack in the full down position. 

5. Lift off the plastic base hood, separating the Velcro holding it to the base frame. 

6. Using a 1/2” socket and 1/2” wrench, remove the four bolts, washers and nuts holding the jack support 
straps to the base frame. 

7. Using needle-nosed pliers, remove the two cotter keys on the pump link and remove the pump link. 

8. Using a 1/2” socket and a 1/2” wrench, remove the four bolts holding the jack base to the base frame (using 
a 3" extension may be required). Remove the jack from the base frame. 

9. Reverse steps 6-8 to install the replacement jack. Reinstall the base hood and the stretcher litter. 

JACK REPLACEMENT (WITH COMPRESSION SPRING) 

Required Tools: 

3/8” Wrench Needle-Nosed Pliers Straight Screwdriver 

Spring Compression Tool 

Replacement Procedure: 

1. Apply stretcher brakes. Raise litter to full up. Raise Fowler to full up and raise siderails. 

2. Use a 3/8” wrench to remove the bolt in the litter support tube above black bellows on both ends. 

3. With the assistance of another person, lift off the stretcher litter and set it aside, taking care not to damage 
the siderails, etc. 

4. Push down on the jack actuator to put the jack in the full down position. 

5. Lift off the plastic base hood, separating the Velcro holding it to the base frame. 

6. Using needle-nosed pliers, pull cotter pin from pump cylinder. 

7. Using a straight screwdriver and pump spring compression tool (available upon request), compress the 
pump spring and pry the pump link out of the pump cylinder. 

CAUTION 

Be sure not to let the pump piston come out of the jack or damage may occur. 

8. Remove and replace jack as described in the procedure above. 

9. Replace pump spring and pump link using the straight screwdriver and the pump compression tool. 

10. Reinstall the base hood and the stretcher litter. 


9 




Service Information 


HYDRAULIC SYSTEM TROUBLESHOOTING 
NOTE 

Be sure the pedal linkage has been adjusted properly before beginning service on the jacks (see page 8). 


PROBLEM/SYMPTOM 

SOLUTION 

Jack will not raise to full height. 

Check for leaks. Add hydraulic fluid (see p. 11). 

Jack will not hold in raised position. 

Check linkage to ensure it is not engaged. If link¬ 
age is engaged, use a 7/16" socket or wrench to 
back off the nut until the jack drift stops. 

If the jack still does not hold, replace valve #1 (see 

p. 12). 

Jack will not pump up and the jack actuator rod 
does not move. 

Close the needle valve. If the jack still will not 
pump up after closing the needle valve, replace 
valve #2 (see p. 13). 

Jack will not pump up but the jack actuator rod 
does move when the pump pedal is activated. 

Replace valve #2 (see p. 13). 

Jack will not pump up and the jack actuator rod 
may or may not move. 

Remove excess air (vacuum) in system (see p. 

13). 


Contact Stryker technical service at 1-800-327-0770 for further assistance. 


10 

















Service Information 


CHECKING HYDRAULIC FLUID LEVEL 
Required Tools: 

3/8 Open End Wrench 3/4 Open End Wrench 

Procedure: 

WARNING 

To avoid personal injury or damage to the stretcher, remove the litter and the base hood before beginning 
service on the jacks. 


1. Using a 3/8 open end wrench, remove square head set screws from both head and foot end jack support 
tubes. Remove litter top and set aside. 

2. Lift base hood off base frame and set aside. 

3. Be sure there are no hydraulic leaks. If there are, jack replacement will be necessary. 

4. Lower the jack to the full down position. 

5. Using a 3/4 open end wrench, slowly turn the fill plug located on the side of the reservoir counterclockwise 
to allow excess system pressure to vent. Remove the fill plug. 

6. The hydraulic fluid should be visible at the bottom of the fill hole. If it is not, add Mobil Aero HFA hydraulic 
fluid (Stryker part number 2020-70-475) until the fluid is visible at the bottom of the fill hole. Replace the 
fill plug. 

CAUTION 

Use of other types of oil may damage hydraulic units. 

7. Replace the hood and the litter. 


JACK DESCENT RATE ADJUSTMENT 
Required Tools: 

Screwdriver Bungee Cords 

Adjustment Procedure: 

1. Pump the litter up to full height. 

2. Lift the base hood, separating the hood from the base frame. Using the bungee cords, support the base 
hood. 

3. The descent rate needle valve is located on the base of the jack. Turning the needle valve clockwise, with 
a screwdriver, will decrease the rate of descent. Turning it counterclockwise will increase the rate of de¬ 
scent. 

4. Adjust the needle valve so that the foot end of the stretcher descends slightly faster than the head end. 
(The factory settings are 3/4 turn from closed for the head end and 1 1/2 turn from closed for the foot end.) 

NOTE 

The larger percentage of a patient’s weight is located in the torso area. Adjust descent rate accordingly. 

5. Remove the bungee cords supporting the base hood and secure the hood to the base frame. 

NOTE 

The jack descent rate was preset at the factory to drop the foot end faster than the head. It is recommended 

that the foot drop faster to avoid patient disorientation. 


11 




Service Information 


HYDRAULIC CHECK VALVE REPLACEMENT 
Required Tools: 

3/8 Open End Wrench Stiff Wire (with bent, pointed end) Small Needle Nose Pliers 

3/4 Open End Wrench Torque Wrench (with Ft. Lbs. adjust.) 7/32 Hex Allen Wrench 

1/2 Inch Diameter Rod 

Replacement of Valve #1 


WARNING 

To avoid personal injury or damage to the stretcher, remove the litter and the base hood before beginning 
service on the jacks. Lower the jack rod completely to relieve the pressure on the pump piston side of the 
jack. This will prevent large hydraulic fluid loss and possible damage when the base plugs are removed. 

1. Remove the base plug (3) and discard the seal (4). 

2. Remove the valve plug (5). 

3. Using a stiff wire with a bent, pointed end, remove the valve (1) and the seal (6) and discard the seal. 

4. Install the new seal (6) flat to the bottom of its hole with a 1/2” diameter rod. 

5. Install the new valve (1) with the beveled end out (as shown in the illustration). 

6. Install the valve plug (5) and tighten to 10 foot-pounds torque. 

7. Install the new seal (4) with the base plug (3) and tighten to 10 foot-pounds torque. 

8. Pump up the jack to the maximum height. 

9. Be sure there are no hydraulic leaks before replacing the base hood and the litter. 


ITEM 

PART NO. 

PART NAME 

1 

926-20-153 

Check Valve 

2 

715-1-341 

Poppet 

3 

715-1-101 

Base Plug 

4 

926-20-156 

Seal 

5 

715-1-309 

Valve Plug 

6 

926-20-154 

Seal 

7 

715-1-301 

Base Plug 

8 

926-20-156 

Seal 

9 

390-2-134 

Con. Comp. Spring 

10 

1210-70-9 

Valve Assembly* 

10 

715-270-100 

Valve Assembly** 

11 

45-966 

O-Ring 

12 

45-967 

O-Ring 

13 

715-100-325 

Pump Piston 


* Used on jack part number 1210-70-10. 
** Used on jack part number 715-270-10. 
(See label on side of jack reservoir for jack 
part number). 



12 




Service Information 


HYDRAULIC CHECK VALVE REPLACEMENT (CONTINUED) 

Replacement of Valve (Poppet) #2 
WARNING 

To avoid personal injury or damage to the stretcher, remove the litter and the base hood before beginning 
service on the jacks. Lower the jack rod completely to relieve the pressure on the pump piston side of the 
jack. This will prevent large hydraulic fluid loss and possible damage when the base plugs are removed. 

1. Remove the base plug (7) and discard the seal (8). 

2. Remove the compression spring (9). 

3. Using a small needle nose pliers, remove the poppet (2). 

4. Install the new poppet (2). 

5. Install the compression spring (9). 

6. Install the new seal (8) and the base plug (7) and tighten to 10 foot-pounds torque. 

7. Pump up the jack to the maximum height to check its operation. 

8. Check for hydraulic leaks before replacing the base hood and the litter. 


REMOVAL OF EXCESS AIR (VACUUM) FROM THE HYDRAULIC SYSTEM 
Procedure: 

1. Verify all hydraulic linkages are secure and operating properly (see pedal linkage adjustment procedure 
page 8). 

2. Using pump pedal, actuate system several times. This will force the air through the system and the jack 
should now pump up. 


BRAKE ADJUSTMENT 


Required Tools: 

3/32” Hex Allen Wrench 
Pry Bar 

Thread "Locktite” 



Flat on thread of stud must always be 
aligned with set screw. Turn must be 
full circle only. 



DECREASE 


INCREASE 


BRAKE 

TENSION 

An.i 


13 





Service Information 


BASE LUBRICATION POINTS 



(G r (G 






1. Lubricate brake adjuster rod 
around area shown with MPG-2 
grease or equivalent. 



Do not grease 
area shown. 


4 // 





3-Sided Control Base Ass’y, Both Sides & Foot End 







3-Sided Control Base Ass’y, Both Sides & Foot End 







3-Sided Control Base Ass’y, Both Sides & Foot End 


Item 

Part No. 

Part Name 

Qty. 

Item 

Part No. 

Part Name 

Qty. 

A 

3-4 

Hex Hd. Cap Screw 

2 

BT 

715-1-158 

Caster Nut 

4 

B 

3-47 

Hex Hd. Cap Screw 

4 

BW 

715-1-165 

Actuator Plate Ass’y 

2 

C 

3-62 

Hex Hd. Cap Screw 

8 

BY 

715-1-192 

Jack Support 

2 

D 

3-85 

Hex Hd. Cap Screw 

8 

BZ 

715-1-193 

Jack Support Clamp 

2 

E 

8-17 

Soc. Hd. Cap Screw 

1 

CA 

(page 27) 

Brake Cam Ass’y 

2 

F 

11-3 

Washer 

8 

CB 

715-1-230 

Brake/Steer Rod 

1 

H 

11-4 

Washer 

2 

CC 

715-1-333 

Release Valve Stop Sleeve 

2 

J 

11-13 

Washer 

3 

CD 

715-201-201 

Brake/Steer Pedal 

1 

K 

11-262 

Washer 

8 

CE 

716-1-15 

Release Pivot Bar 

2 

L 

13-38 

Lock Washer 

4 

CF 

716-1-52 

Pivot Ass’y, Foot 

1 

M 

14-2 

Nylon Washer 

6 

CH 

716-1-61 

Pedal Shaft 

1 

N 

14-3 

Thrust Washer 

2 

CJ 

716-1-71 

Rel.Rod, Hd., Rt., Long 

2 

P 

14-7 

Nylon Washer 

6 

CK 

716-1-75 

Rel. Ped., Ft., Rt., Btm. 

1 

R 

14-9 

Spring Washer 

2 

CL 

716-1-102 

Pump Link Ass’y, Foot 

1 

S 

14-21 

Nylon Washer 

2 

CM 

716-1-109 

Pump Link Ass’y, Hd. 

1 

T 

15-11 

Hex Jam Nut 

2 

CN 

716-1-119 

Pivot Ass’y, Head 

1 

W 

16-2 

Fiberlock Nut 

2 

CP 

716-1-281 

Pump Idler Link 

2 

Y 

16-28 

Fiberlock Nut 

6 

CR 

716-1-286 

Release Pedal Cam 

2 

Z 

16-36 

Nylock Nut 

16 

cs 

(page 28) 

Pump Pedal Ass’y, Foot 

1 

AA 

16-49 

Nylock Nut 

3 

cw 

716-1-293 

Release Pedal, Left 

1 

AB 

21-22 

Set Screw 

2 

CY 

716-1-294 

Release Pedal, Right 

1 

AC 

21-50 

Set Screw 

2 

CZ 

763-1-15 

Jack Spring 

1 

AD 

23-25 

Hex Wash. Hd. Tap. Screw 

1 

DA 

763-1-16 

Spring Holder 

1 

AE 

26-13 

Roll Pin 

2 

DB 

946-1-116 

Brake Bar Bushing 

4 

AF 

26-195 

Clevis Pin 

2 

DC 

1210-1-27 

Pump Connect. Rod Ass’y 

1 

AH 

26-261 

Groove Pin 

2 

DD 

1210-1-44 

Pump Pedal Spacer 

1 

AJ 

27-4 

Cotter Pin 

11 

DE 

1210-1-47 

Spring Retainer 

1 

AK 

27-7 

Cotter Pin 

8 

DF 

1210-1-104 

Pump Pedal Link Ass’y 

1 

AL 

27-16 

Cotter Pin 

2 

DH 

1210-1-111 

End Release Pedal Brkt. 

1 

AM 

28-97 

Retaining Ring 

2 

DJ 

1210-1-112 

Hd./Lt. Rel. Rod Wldmt. 

1 

AN 

29-7 

Dual Lock 

4 

DK 

1210-1-114 

Pedal Pivot, Right 

1 

AP 

29-8 

Dual Lock 

4 

DL 

1210-1-115 

Pedal Pivot, Left 

1 

AR 

29-9 

Dual Lock 

4 

DM 

1210-1-120 

Base Frame Weldment 

1 

AS 

29-10 

Dual Lock 

4 

DN 

1210-1-123 

Rel. Pedal Trans Wldmt. 

1 

AT 

38-235 

Pump Return Spring 

2 

DP 

1210-1-134 

Rel. Pedal Linkage Wldmt. 

1 

AW 

38-251 

Spring 

1 

DR 

1210-1-138 

Release Rod Clamp 

2 

AY 

38-312 

Extension Spring 

1 

DS 

(page 29) 

Side Release Pedal 

2 

AZ 

38-326 

Extension Spring 

2 

DT 

1210-1-345 

Brake/Steer Pedal, Ft. 

1 

BA 

38-355 

Steerlock Extension Spring 

2 

DW 

(page 24 or 25.1) 

Jack Assembly 

2 

BB 

42-20 

Collar 

2 

DY 

26-8 

Roll Pin 

1* 

BC 

52-245 

Nyliner Bearing 

4 

DZ 

715-1-161 

Fifth Wheel Cam 

1* 

BD 

52-284 

Nylon Spacer 

3 

EA 

715-1-337 

Fifth Wheel Plate 

1* 

BE 

52-302 

Shoulder Washer 

2 

EB 

(page 32) 

Caster Wheel Ass’y 

4 ** 

BF 

52-747 

Flanged Bearing 

4 

EC 

(page 31) 

Steerlock Caster 

-| *** 

BH 

715-1-11 

Brake Cushion 

4 

ED 

715-1-157 

Fifth Wheel Bearing 

1* 

BJ 

715-1-61 

Caster Brake Ass’y 

2 

EE 

7-4 

Truss Hd. Mach. Screw 

1 

BK 

715-1-92 

Pump Pedal Shaft 

1 

EF 

715-1-136 

Fifth Wheel Spring 

1* 

BL 

715-1-94 

Compression Spring 

2 

EH 

16-16 

Nylock Nut 

1* 

BM 

(page 30) 

Side Pump Pedal Ass’y 

1 

EJ 

715-1-217 

Fifth Wheel Latch 

1* 

BN 

715-1-133 

Collar 

1 

EK 

3-20 

Hex Hd. Cap Screw 

1* 

BP 

715-1-140 

Vinyl Tube 

2 

EL 

81-219 

Fifth Wheel Bearing 

1* 

BR 

(page 26) 

Brake Adjuster Ass’y 

2 

EM 

(page 33) 

Fifth Wheel Assembly 

1* 

BS 

715-1-156 

Ground Chain 

1 

EN 

715-1-149 

Woodruff Key 

1* 


* These parts are used with the optional Fifth Wheel assembly. 

** Quantity 3 when Fifth Wheel is not present. 

’** Used only when Fifth Wheel is not present. 


17 




3-Sided Control Base Ass‘y, Both Sides & Head End 





3-Sided Control Base Ass’y, Both Sides & Head End 




3-Sided Control Base Ass‘y, Both Sides & Head End 


Item 

Part No. 

Part Name 

Qty. 

Item 

Part No. 

Part Name 

Qty. 

A 

3-4 

Hex Hd. Cap Screw 

2 

BT 

715-1-158 

Caster Nut 

4 

B 

3-47 

Hex Hd. Cap Screw 

4 

BW 

715-1-165 

Actuator Plate Ass’y 

2 

C 

3-62 

Hex Hd. Cap Screw 

8 

BY 

715-1-192 

Jack Support 

2 

D 

3-85 

Hex Hd. Cap Screw 

8 

BZ 

715-1-193 

Jack Support Clamp 

2 

E 

8-17 

Shoulder Bolt 

2 

CA 

(page 27) 

Brake Cam Ass’y 

2 

F 

11-3 

Washer 

8 

CB 

715-1-230 

Brake/Steer Rod 

1 

H 

11-4 

Washer 

2 

CC 

715-1-333 

Release Valve Stop Sleeve 

2 

J 

11-13 

Washer 

3 

CD 

715-201-201 

Brake/Steer Pedal 

1 

K 

11-262 

Washer 

8 

CE 

716-1-15 

Release Pivot Bar 

2 

L 

13-38 

Lock Washer 

4 

CF 

716-1-52 

Pivot Ass’y, Foot 

1 

M 

14-2 

Nylon Washer 

4 

CH 

716-1-61 

Pedal Shaft 

1 

N 

14-3 

Thrust Washer 

2 

CJ 

716-1-71 

Rel.Rod, Hd., Rt., Long 

2 

P 

14-7 

Nylon Washer 

6 

CK 

716-1-75 

Rel. Ped., Ft., Rt., Btm. 

1 

R 

14-9 

Spring Washer 

2 

CL 

716-1-102 

Pump Link Ass’y, Foot 

1 

S 

14-21 

Nylon Washer 

2 

CM 

716-1-109 

Pump Link Ass’y, Hd. 

1 

T 

15-11 

Hex Jam Nut 

2 

CN 

716-1-119 

Pivot Ass’y, Head 

1 

W 

16-2 

Fiberlock Nut 

2 

CP 

716-1-281 

Pump Idler Link 

2 

Y 

16-28 

Nylock Nut 

6 

CR 

716-1-286 

Release Pedal Cam 

2 

Z 

16-36 

Nylock Nut 

16 

CT 

(page 28) 

Pump Pedal Ass’y, Foot 

1 

AA 

16-49 

Flexlock Nut 

3 

CW 

716-1-293 

Release Pedal, Left 

1 

AB 

21-22 

Set Screw 

2 

CY 

716-1-294 

Release Pedal, Right 

1 

AC 

21-50 

Set Screw 

2 

CZ 

763-1-15 

Jack Spring 

1 

AD 

23-25 

Hex Wash. Hd. Tap. Screw 

1 

DA 

763-1-16 

Spring Holder 

1 

AE 

26-13 

Roll Pin 

2 

DB 

946-1-116 

Brake Bar Bushing 

4 

AF 

26-195 

Clevis Pin 

2 

DC 

1210-1-27 

Pump Connect. Rod Ass’y 

1 

AH 

26-261 

Groove Pin 

2 

DD 

1210-1-44 

Pump Pedal Spacer 

1 

AJ 

27-4 

Cotter Pin 

11 

DE 

1210-1-47 

Spring Retainer 

1 

AK 

27-7 

Cotter Pin 

8 

DF 

1210-1-104 

Pump Pedal Link Ass’y 

1 

AL 

27-16 

Cotter Pin 

2 

DH 

1210-1-111 

End Release Pedal Brkt. 

1 

AM 

28-97 

Retaining Ring 

2 

DJ 

1210-1-112 

Hd./Lt. Rel. Pedal Wldmt. 

1 

AN 

29-7 

Dual Lock 

4 

DK 

1210-1-114 

Pedal Pivot, Right 

1 

AP 

29-8 

Dual Lock 

4 

DL 

1210-1-115 

Pedal Pivot, Left 

1 

AR 

29-9 

Dual Lock 

4 

DM 

1210-1-120 

Base Frame Weldment 

1 

AS 

29-10 

Dual Lock 

4 

DN 

1210-1-123 

Rel. Pedal Trans Wldmt. 

1 

AT 

38-235 

Pump Return Spring 

2 

DP 

1210-1-134 

Rel. Pedal Linkage Wldmt. 

1 

AW 

38-251 

Spring 

1 

DR 

1210-1-138 

Release Rod Clamp 

2 

AY 

38-312 

Extension Spring 

1 

DS 

(page 29) 

Side Release Pedal Ass’y 

2 

AZ 

38-326 

Extension Spring 

2 

DW 

1210-1-346 

Brake/Steer Pedal, Hd. 

1 

BA 

38-355 

Steerlock Extension Spring 

2 

DY 

(page 24 or 25.1) 

Jack Assembly 

2 

BB 

42-20 

Collar 

1 

DZ 

26-8 

Roll Pin 

1* 

BC 

52-245 

Nyliner Bearing 

4 

EA 

715-1-161 

Fifth Wheel Cam 

1* 

BD 

52-284 

Nylon Spacer 

3 

EB 

715-1-337 

Fifth Wheel Plate 

1* 

BE 

52-302 

Shoulder Washer 

2 

EC 

(page 32) 

Caster Wheel Ass’y 

1* 

BF 

52-747 

Flanged Bearing 

4 

ED 

(page 31) 

Steerlock Caster 

-j ** 

BH 

715-1-11 

Brake Cushion 

4 

EE 

715-1-157 

Fifth Wheel Bearing 

1* 

BJ 

715-1-61 

Caster Brake Ass’y 

2 

EF 

7-4 

Truss Hd. Mach. Screw 

1* 

BK 

715-1-92 

Pump Pedal Shaft 

1 

EH 

715-1-136 

Fifth Wheel Spring 

1* 

BL 

715-1-94 

Compression Spring 

2 

EJ 

16-16 

Nylock Nut 

1* 

BM 

(page 30) 

Side Pump Pedal Ass’y 

1 

EK 

715-1-217 

Fifth Wheel Latch 

1* 

BN 

715-1-133 

Collar 

1 

EL 

3-20 

Hex Hd. Cap Screw 

1* 

BP 

715-1-140 

Vinyl Tube 

2 

EM 

81-219 

Fifth Wheel Bearing 

1* 

BR 

(page 26) 

Brake Adjuster Ass’y 

2 

EN 

(page 33) 

Fifth Wheel Assembly 

1* 

BS 

715-1-156 

Ground Chain 

1 

EP 

715-1-149 

Woodruff Key 

1* 


* These parts are used with the optional Fifth Wheel assembly. 

** Used only when Fifth Wheel is not present. 


20 





4-Sided Control Base Assembly 










4-Sided Control Base Assembly 


Item 

Part No. 

Part Name 

Qty. 

Item 

Part No. 

Part Name 

Qty. 

A 

3-4 

Hex Hd. Cap Screw 

4 

BT 

715-1-158 

Caster Nut 

4 

B 

3-47 

Hex Hd. Cap Screw 

4 

BW 

715-1-165 

Actuator Plate Ass’y 

2 

C 

3-62 

Hex Hd. Cap Screw 

8 

BY 

715-1-192 

Jack Support 

2 

D 

3-85 

Hex Hd. Cap Screw 

8 

BZ 

715-1-193 

Jack Support Clamp 

2 

E 

8-17 

Shoulder Bolt 

2 

CA 

(page 27) 

Brake Cam Ass’y 

2 

F 

11-3 

Washer 

4 

CB 

715-1-230 

Brake/Steer Rod 

1 

H 

11-4 

Washer 

2 

CC 

715-1-333 

Release Valve Stop Sleeve 

2 

J 

11-13 

Washer 

3 

CE 

716-1-15 

Release Pivot Bar 

2 

K 

11-262 

Washer 

8 

CF 

716-1-52 

Pivot Ass’y, Foot 

1 

L 

13-38 

Lock Washer 

4 

CH 

716-1-61 

Pedal Shaft 

2 

M 

14-2 

Nylon Washer 

4 

CJ 

716-1-71 

Rel.Rod, Hd., Rt., Long 

2 

N 

14-3 

Thrust Washer 

4 

CK 

716-1-75 

Rel. Ped., Ft., Rt., Btm. 

2 

P 

14-7 

Nylon Washer 

6 

CL 

716-1-102 

Pump Link Ass’y, Foot 

1 

R 

14-9 

Spring Washer 

2 

CM 

716-1-109 

Pump Link Ass’y, Hd. 

1 

S 

14-21 

Nylon Washer 

2 

CN 

716-1-119 

Pivot Ass’y, Head 

1 

T 

15-11 

Hex Jam Nut 

4 

CP 

716-1-281 

Pump Idler Link 

2 

W 

16-2 

Fiberlock Nut 

2 

CR 

716-1-286 

Release Pedal Cam 

4 

Y 

16-28 

Fiberlock Nut 

8 

CS 

(page 28) 

Pump Pedal Ass’y, Foot 

1 

Z 

16-36 

Nylock Nut 

16 

CT 

(page 28) 

Pump Pedal Ass’y, Head 

1 

AA 

16-49 

Flexlock Nut 

3 

CW 

716-1-293 

Release Pedal, Left 

2 

AB 

21-22 

Set Screw 

2 

CY 

716-1-294 

Release Pedal, Right 

2 

AC 

21-50 

Set Screw 

2 

CZ 

763-1-15 

Jack Spring 

1 

AD 

23-25 

Hex Wash. Hd. Tap. Screw 

1 

DA 

763-1-16 

Spring Holder 

1 

AE 

26-13 

Roll Pin 

2 

DB 

946-1-116 

Brake Bar Bushing 

4 

AF 

26-195 

Clevis Pin 

2 

DC 

1210-1-27 

Pump Connect. Rod Ass’y 

1 

AH 

26-261 

Groove Pin 

2 

DE 

1210-1-47 

Spring Retainer 

1 

AJ 

27-4 

Cotter Pin 

12 

DF 

1210-1-104 

Pump Pedal Link Ass’y 

1 

AK 

27-7 

Cotter Pin 

8 

DH 

1210-1-111 

End Release Pedal Brkt. 

2 

AL 

27-16 

Cotter Pin 

2 

DJ 

1210-1-112 

Hd./Lt. Rel. Rod Wldmt. 

1 

AM 

28-97 

Retaining Ring 

2 

DK 

1210-1-114 

Pedal Pivot, Right 

1 

AN 

29-7 

Dual Lock 

4 

DL 

1210-1-115 

Pedal Pivot, Left 

1 

AP 

29-8 

Dual Lock 

4 

DM 

1210-1-120 

Base Weldment 

1 

AR 

29-9 

Dual Lock 

4 

DN 

1210-1-123 

Rel. Pedal Trans. Wldmt. 

1 

AS 

29-10 

Dual Lock 

4 

DP 

1210-1-134 

Rel. Pedal Linkage Wldmt. 

1 

AT 

38-235 

Pump Return Spring 

4 

DR 

1210-1-138 

Release Rod Clamp 

2 

AW 

38-251 

Spring 

2 

DS 

(page 29) 

Side Release Pedal Ass’y 

2 

AY 

38-312 

Extension Spring 

1 

DT 

1210-1-345 

Brake/Steer Pedal, Foot 

1 

AZ 

38-326 

Extension Spring 

2 

DW 

1210-1-346 

Brake/Steer Pedal, Head 

1 

BA 

38-355 

Steerlock Extension Spring 

2 

DY 

(page 24 or 25.1) 

Jack Assembly 

2 

BB 

42-20 

Collar 

2 

DZ 

26-8 

Roll Pin 

1* 

BC 

52-245 

Nyliner Bearing 

4 

EA 

715-1-161 

Fifth Wheel Cam 

1* 

BD 

52-284 

Nylon Spacer 

3 

EB 

715-1-337 

Fifth Wheel Plate 

1* 

BE 

52-302 

Shoulder Washer 

2 

EC 

(page 32) 

Caster Wheel Ass’y 

1* 

BF 

52-747 

Flanged Bearing 

4 

ED 

(page 31) 

Steerlock Caster 

-j *** 

BH 

715-1-11 

Brake Cushion 

4 

EE 

715-1-157 

Fifth Wheel Bearing 

1* 

BJ 

715-1-61 

Caster Brake Ass’y 

2 

EF 

7-4 

Truss Hd. Mach. Screw 

1 

BK 

715-1-92 

Pump Pedal Shaft 

1 

EH 

715-1-136 

Fifth Wheel Spring 

1* 

BL 

715-1-94 

Compression Spring 

2 

EJ 

16-16 

Nylock Nut 

1* 

BM 

(page 30) 

Side Pump Pedal Ass’y 

1 

EK 

715-1-217 

Fifth Wheel Latch 

1* 

BN 

715-1-133 

Collar 

1 

EL 

3-20 

Hex Hd. Cap Screw 

1* 

BP 

715-1-140 

Vinyl Tube 

3 

EM 

81-219 

Fifth Wheel Bearing 

1* 

BR 

(page 26) 

Brake Adjuster Ass’y 

2 

EN 

(page 33) 

Fifth Wheel Assembly 

1* 

BS 

715-1-156 

Ground Chain 

1 

EP 

715-1-149 

Woodruff Key 

1* 


* These parts are used with the optional Fifth Wheel assembly. 

** Quantity 3 when Fifth Wheel is not present. 

’** Used only when Fifth Wheel is not present. 


23 




Variable Descent Jack Assembly 



Part No. 

Part Name 

Qty. 

45-904 

O-Ring 

1 

715-1-340 

Cap Assembly 

1 

390-1-243 

Gasket 

1 

715-1-323 

Actuator Cylinder 

1 

715-1-325 

Actuator 

1 

45-14 

O-Ring 

1 

926-20-161 

Parker Packing 

1 

715-1-331 

Piston End 

1 

926-20-162 

Wear Ring 

1 

4-14 

Soc. Hd. Cap Screw 

1 

45-110 

O-Ring 

1 

388-1-38 

Plug 

1 

715-1-322 

Reservoir 

1 

390-1-244 

Gasket 

1 

390-1-238 

Actuator Gasket 

1 

(page 25) 

Jack Base Assembly 

1 

390-2-139 

Retaining Collar 

2 

715-1-333 

Rel. Valve Stop Sleeve 

1 

1210-70-7 

Label 

1 

715-100-325 

Repl. Pump Piston 

1 


24 





Variable Descent Jack Base Assembly 



Item 

Part No. 

Part Name 

Qty. 

Item 

Part No. 

Part Name 

Qty. 

A 

1210-70-12 

Jack Base, Machined 

1 

S 

715-1-328 

Piston Wear Ring 

1 

B 

1210-70-13 

Base Plug 

1 

T 

14-50 

Bearing Retainer 

1 

C 

1210-70-14 

Pin 

1 

W 

715-1-327 

Cylinder Wear Ring 

1 

E 

45-966 

O-Ring 

1 

X 

715-1-316 

Pump Cylinder 

1 

F 

38-311 

Compression Spring 

1 

Y 

715-1-329 

Pump Seal 

1 

H 

45-6 

O-RIng 

3 

AA 

715-1-307 

Needle Valve 

1 

J 

1210-70-16 

Pin Housing 

1 

AB 

926-20-156 

Seal 

2 

K 

45-967 

O-Ring 

1 

AC 

715-1-301 

Base Plug 

2 

L 

715-1-309 

Valve Plug 

1 

AD 

715-1-341 

Poppet 

1 

M 

926-20-153 

Check Valve 

1 

AE 

390-2-134 

Conical Comp. Spring 

1 

N 

926-20-154 

Seal 

1 

AF 

45-969 

O-Ring 

1 

P 

715-1-318 

Pump Piston 

1 

AH 

1210-70-9 

Valve Assembly 

1 

R 

45-110 

O-Ring 

1 

AJ 

715-100-325 

Repl. Pump Piston 

N/A 


25 





Standard Jack Assembly 



Item 

Part No. 

Part Name 

Qty. 

Item 

Part No. 

Part Name 

Qty. 

A 

45-904 

O-Ring 

1 

L 

45-110 

O-Ring 

1 

B 

715-1-340 

Cap Assembly 

1 

M 

388-1-38 

Plug 

1 

C 

390-1-243 

Gasket 

1 

N 

715-1-322 

Reservoir 

1 

D 

715-1-323 

Actuator Cylinder 

1 

P 

390-1-244 

Gasket 

1 

E 

715-1-325 

Actuator 

1 

R 

390-1-238 

Gasket, Actuator 

1 

F 

45-14 

O-Ring 

1 

S 

(page 25.2) 

Jack Base Assembly 

1 

G 

926-20-161 

Parker Packing 

1 

T 

390-2-139 

Retaining Collar 

2 

H 

715-1-331 

Piston End 

1 

W 

715-1-333 

Rel. Valve Stop Sleeve 

1 

J 

926-20-162 

Wear Ring 

1 

Y 

715-270-11 

Label 

1 

K 

4-14 

Soc. Hd. Cap Screw 

1 






25.1 






Standard Jack Base Assembly 



Item 

Part No. 

Part Name 

Qty. 

Item 

Part No. 

Part Name 

Qty. 

A 

1210-70-12 

Jack Base 

1 

R 

45-110 

O-Ring 

1 

B 

1210-70-13 

Base Plug 

1 

S 

715-1-328 

Piston Wear Ring 

1 

C 

715-270-1 

Pin 

1 

T 

14-50 

Bearing Retainer 

1 

E 

45-966 

O-Ring 

1 

W 

715-1-327 

Cylinder Wear Ring 

1 

F 

38-311 

Compression Spring 

1 

X 

715-1-316 

Pump Cylinder 

1 

H 

45-006 

O-Ring 

3 

Y 

715-1-329 

Pump Seal 

1 

J 

715-270-2 

Pin Housing 

1 

AA 

715-1-307 

Needle Valve 

1 

K 

43-967 

O-Ring 

1 

AB 

926-20-156 

Seal 

2 

L 

715-1-309 

Valve Plug 

1 

AC 

715-1-301 

Base Plug 

2 

M 

926-20-153 

Check Valve 

1 

AD 

715-1-341 

Poppet 

1 

N 

926-20-154 

Seal 

1 

AE 

390-2-134 

Conical Comp. Spring 

1 

P 

715-1-310 

Pump Piston 

1 

AF 

715-270-100 

Valve Assembly 

1 


25.2 




Brake Adjuster Assembly 



Part No. Part Name Qty. 

715-1-62 Threaded Stud Assembly 1 

14-4 Nylon Washer 

715-1-180 Bearing 

28-8 Retaining Ring 


Item 

A 

B 

C 

D 


26 


^ CM CM 


cmoQ 


Brake Cam Assembly 



Item Part No. Part Name 

715-1-221 Brake Cam 

16-59 Fiberlock Nut 

8-21 Soc. Hd. Cap Screw 

715-1-173 Brake Connecting Link 


Qty. 

1 

1 

1 

1 


27 




End Control Pump Pedal Assembly, Head 



Item Part No. 

A 716-1-285 

B 26-12 

C 716-1-290 

D 721-40-25 


Part Name Qty. 

Pump Pivot, Head End 1 

Roll Pin 1 

Pump Ped. Wldmt., Head 1 

Pedal 1 


End Control Pump Pedal Assembly, Foot 



Item Part.No. 

A 716-1-283 

B 26-12 

C 716-1-289 

D 721-40-25 


Part Name Qty. 

Pump Pivot, Foot End 1 

Roll Pin 1 

Pump Ped. Wldmt., Foot 1 

Pedal 1 


NOTE 

Apply plastic adhesive to the mating surfaces of item D prior to assembly. 


28 



Side Release Pedal Assembly, Right 



Item Part No. 

A 1210-1-51 

B 715-1-126 


Part Name Qty. 

Side Release Weldment, Rt. 1 
Side Control Pedal Pad 1 


Side Release Pedal Assembly, Left 




Assembly part number 
1210-1-52 



Item Part No. 

A 1210-1-53 

B 715-1-126 


Part Name Qty. 

Side Release Weldment, Lt. 1 
Side Control Pedal Pad 1 


NOTE 

Apply plastic adhesive to the mating surfaces of item B prior to assembly. 


29 



Side Pump Pedal Assembly 



Item Part No. 


Part Name 


Qty. 


A 

B 

C 


715-1-83 Pedal Ass’y Weldm’t, Pump 1 

715-1-126 Side Control Pedal Pad 

81-44 Bearing, Bronze 


NOTE 

Apply plastic adhesive to the mating surfaces of item B prior to assembly. 


30 


CM CM 







Caster and Caster Cover Replacement Kits 



Item Part No. 

A 715-2-20 

B 715-1-266 

C 715-1-265 


Part Name Qty. 

Caster Assembly 1 

Caster Cover, Left 1 

Caster Cover, Right 1 


P/N 715-259^400 - Kit to replace 4 standard caster assemblies with necessary hardware - no caster covers. 

P/N 715-269-400 - Kit to replace 3 standard caster assemblies and 1 steerlock caster with necessary hard¬ 
ware - no caster covers. 

P/N 715-259-100 - Kit to replace 1 standard caster assembly with necessary hardware - no caster covers. 
P/N 1010-56-200 - Kit to replace both caster covers on all four wheels. 


32 



Fifth Wheel Assembly 



Item 

Part No. 

Part Name 

Qty. 

A 

715-1-339 

Fifth Wheel Pivot Assembly 

1 

B 

715-1-17 

Fifth Wheel Bushing 

1 

C 

16-11 

Flexlock Nut 

1 

D 

715-1-15 

Spring 

1 

E 

715-1-13 

Fifth Wheel Bracket 

2 

F 

16-12 

Flexlock Nut 

1 

G 

390-1-54 

Wheel 

1 

H 

3-31 

Hex Head Cap Screw 

1 

J 

3-82 

Hex Head Cap Screw 

1 


33 


3-Sided Base Graphics, Foot End Control 


Assembly part numbers 
1210-750-10 thru 1210-750-70 



Item Part No. 

A 1210-750-9 

B 1210-800-9 

G 1210-45-25 

H 946-1-60 

J 715-1-134 

K 1212-1-17 


Part Name Qty. 

Head End Brake/Steer Label 1 

Renaissance Series Label 2 

Base Hood 1 

Stryker Logo Label 1 

Bellows 2 

Specification Label 1 


Color 

Item C 

Control Label, Left 

Item D 

Control Label, Right 

Item E 

Control Label, Foot 

Litter Bumper Strip 

RED 

1210-800-11 

1210-800-12 

1210-850-15 

1010-700-15 

PURPLE 

1210-800-21 

1210-800-22 

1210-850-25 

1010-700-25 

GREEN 

1210-800-31 

1210-800-32 

1210-850-35 

1010-700-35 

GRAY 

1210-800-41 

1210-800-42 

1210-850-45 

1010-700-45 

TEAL 

1210-800-51 

1210-800-52 

1210-850-55 

1010-700-55 

PINK 

1210-800-61 

1210-800-62 

1210-850-65 

1010-700-65 

BLUE 

1210-800-71 

1210-800-72 

1210-850-75 

1010-700-75 


34 














































3-Sided Base Graphics, Head End Control 


Assembly part numbers 
1210-800-10 thru 1210-800-70 



Item Part No. Part Name Qty. 

B 1210-800-9 Renaissance Series Label 2 

E 1210-750-8 Foot End Brake/Steer Label 1 

G 1210-45-25 Base Hood 1 

H 946-1-60 Stryker Logo Label 1 

J 715-1-134 Bellows 2 

K 1212-1-17 Specification Label 1 


Color 

Item A 

Control Label, Head 

Item C 

Control Label, Left 

Item D 

Control Label, Right 

Litter Bumper Strip 

RED 

1210-800-13 

1210-800-11 

1210-800-12 

1010-700-15 

PURPLE 

1210-800-23 

1210-800-21 

1210-800-22 

1010-700-25 

GREEN 

1210-800-33 

1210-800-31 

1210-800-32 

1010-700-35 

GRAY 

1210-800-43 

1210-800-41 

1210-800-42 

1010-700-45 

TEAL 

1210-800-53 

1210-800-521 

1210-800-52 

1010-700-55 

PINK 

1210-800-63 

1210-800-61 

1210-800-62 

1010-700-65 

BLUE 

1210-800-73 

1210-800-71 

1210-800-72 

1010-700-75 


35 














































4-Sided Base Graphics 


Assembly part numbers 



Item 


Part No. 


Part Name 


Qty. 


B 

G 

J 

K 


1210-800-9 

1210-45-25 

715-1-134 

1212-1-17 


Renaissance Series Label 2 

Base Hood 1 

Bellows 2 

Specification Label 1 


Color 

Item A Control 
Label, Head 

Item C Control 
Label, Left 

Item D Control 
Label, Right 

Item E Control 
Label, Foot 

Litter Bumper 
Strip 

RED 

1210-800-13 

1210-800-11 

1210-800-12 

1210-850-15 

1010-700-15 

PURPLE 

1210-800-23 

1210-800-21 

1210-800-22 

1210-850-25 

1010-700-25 

GREEN 

1210-800-33 

1210-800-31 

1210-800-32 

1210-850-35 

1010-700-35 

GRAY 

1210-800-43 

1210-800-41 

1210-800-42 

1210-850-45 

1010-700-45 

TEAL 

1210-800-53 

1210-800-51 

1210-800-52 

1210-850-55 

1010-700-55 

PINK 

1210-800-63 

1210-800-61 

1210-800-62 

1210-850-65 

1010-700-65 

BLUE 

1210-800-73 

1210-800-71 

1210-800-72 

1210-850-75 

1010-700-75 


36 





















































Litter Assembly, Fold to Head Siderails 



Item 

Part No. 

Part Name 

Qty. 

Item 

Part No. 

Part Name 

Qty. 

B 

3-76 

Hex Hd. Cap Screw 

4 

w 

938-1-401 

Collar 

2 

C 

3-78 

Hex Hd. Cap Screw 

4 

Y 

1001-1-36 

Hole Plug 

4 

D 

4-181 

But. Hd. Cap Screw 

4 

Z 

1001-1-37 

Jack Supt. Tube, Hd. 

2 

E 

14-21 

Washer 

8 

AA 

1001-1-41 

Hole Plug 

2 

F 

11-360 

Plastic Spacer 

2 

AB 

1001-26-34 

Bumper Channel 

2 

H 

16-28 

Fiberlock Nut 

8 

AC 

1001-30-29 

End Plug 

4 

J 

16-35 

Nylock Nut 

4 

AD 

1001-201-30 

Support Stamping 

2 

K 

25-38 

Pop Rivet 

2 

AE 

1001-40-12 

Foot Board Receptacle 

20 

L 

28-23 

Retaining Ring 

2 

AF 

1010-201-29 

Plastic Insert 

2 

M 

37-10 

Hole Plug 

4 

AH 

1010-32-85 

Support Tube Ass’y 

1 

N 

46-1 

Set Screw 

2 

AK 

1210-800-8 

Patent Label 

1 

P 

721-31-65 

Hole Plug 

2 

AL 

1001-201-31 

Support Tube Ass’y 

1 

T 

926-400-142 

Bumper Wheel 

4 







Siderail to Litter Assembly, Fold to Head 



Item 

Part No. 

Part Name 

Qty. 

Item 

Part No. 

Part Name 

A 

3-78 

Hex Hd. Cap Screw 

4 

R 

16-36 

Nylock Nut 

B 

4-161 

But. Hd. Cap Screw 

4 

S 

37-200 

Vinyl Sleeve 

C 

4-169 

But. Hd. Cap Screw 

4 

T 

38-271 

Extension Spring 

D 

4-199 

But. Hd. Cap Screw 

12 

W 

(page 39) 

Siderail Ass’y, Right 

E 

7-20 

Truss Hd. Mach. Screw 

2 

Y 

(page 40) 

Siderail Ass’y, Left 

F 

8-7 

Shoulder Bolt 

2 

Z 

1001-26-46 

Lock Mtg. Plate, Rt. 

H 

11-179 

Nylon Washer 

4 

AA 

1001-26-47 

Lock Mtg. Plate, Lt. 

J 

14-2 

Nylon Washer 

2 

AB 

1001-26-51 

Timing Link 

K 

14-19 

Nylon Washer 

2 

AC 

1001-26-53 

Latch Hook Ass’y, Lt. 

M 

16-2 

Fiberlock Nut 

2 

AD 

1001-26-54 

Latch Hook Ass’y, Rt. 

N 

16-3 

Fiberlock Nut 

4 

AE 

1001-26-55 

Latch Guard 

P 

16-28 

Fiberlock Nut 

10 





38 


ro ro 



Glideaway Siderail Assembly, Right 






Glideaway Siderail Assembly, Left 



CO C\J CD CO CD CD 




< CD O 


Siderail Ring Spacer Assembly 


Assembly part number 1001-26-39 



Item Part No. Part Name Qty. 

4-169 Socket Button Hd. Cap Screw 

16-3 Hex Nut 

1001-26-32 Ring Spacer 1 


40.1 


CM CM 



Notes 


40.2 




Head End Siderail Latch Option Assembly 



Item Part No. 


Part Name 


Qty. 


B 

C 

D 

E 

F 

H 

J 

K 

L 

M 

N 


1001-27-17 

1001-27-18 

1001-27-15 

1001-27-24 

25-79 

1001-27-19 

1001-27-23 

11-16 

27-8 

16-3 

2-89 


Handle Bracket, Left 1 

Handle Bracket, Right 1 

Handle Weldment 2 

Link, Left 1 

Pop Rivet 18 

Link Channel 6 

Link, Right 1 

Flat Washer 2 

Cotter Pin 2 

Nylock Nut 4 

Rd. Hd. Machine Screw 2 



Push Handle Option Assembly 



Item 

Part No. 

Part Name 

Qty. 

A 

4-135 

But. Hd. Cap Screw 

2 

B 

4-182 

But. Hd. Cap Screw 

2 

C 

16-28 

Fiberlock Nut 

2 

D 

16-35 

Nylock Hex Nut 

2 

E 

22-10 

Drive Screw 

4 

F 

25-79 

Pop Rivet 

2 

H 

26-11 

Roll Pin 

2 

J 

1010-51-18 

Bumper 

2 

L 

(page 43) 

Push Handle Assembly 

2 

M 

1212-151-4 

P.U.P. Receptacle Wldmt., Lt. 

1 

N 

1212-151-6 

P.U.P. Receptacle Wldmt., Rt. 

1 

P 

1212-151-15 

P.U.P. Handle Rest 

1 


42 



< CO o 


Push Handle Assembly 


Item 



Part Name Part No. Qty. 

26-10 Roll Pin 1 

1010-254-24 Stop Link 1 

1211-151-18 Sleeve Assembly 1 


43 



Stationary Foot End Assembly (Fiberresin) 


Assembly part number 
1010-332-20 



Frame Assembly 
(Ref.) 


Part No. 

Part Name 

Qty. 

1010-332-21 

Footsection Skin, Fiberresin 

1 

7900-1-102 

Velcro Pile 

24 1/2 

25-50 

Pop Rivet 

24 



Knee Gatch Frame Assembly 


Assembly part number 
1010-434-20 



Item 

Part No. 

Part Name 

Qty. 

Item 

Part No. 

Part Name 

Qty. 

A 

3-47 

Hex Hd. Cap Screw 

8 

p 

721-31-65 

Litter Hole Plug (not shown) 2 

B 

3-76 

Hex Hd. Cap Screw 

4 

R 

946-1-65 

Label, Gatch Symbol 

1 

C 

4-105 

Soc. Hd. Cap Screw 

1 

S 

(page 47) 

Gatch Crankscrew Ass’y 

1 

D 

7-20 

Truss Hd. Cap Screw 

4 

T 

1001-34-24 

Thigh Support 

2 

E 

14-2 

Flat Washer 

12 

W 

1001-34-25 

End Plug 

4 

F 

14-21 

Nylon Washer 

4 

Y 

1001-34-48 

Latch Cover 

2 

H 

16-12 

Flexlock Nut 

1 

Z 

1001-34-112 

Calf Frame 

1 

J 

16-28 

Nylock Hex Nut 

16 

AA 

1001-34-120 

Gatch Riser 

1 

K 

25-79 

Pop Rivet 

8 

AB 

1001-34-131 

Slider Support 

2 

L 

27-7 

Cotter Pin 

4 

AC 

1010-234-15 

Mounting Bracket 

2 

M 

52-291 

Round Spacer 

4 

AD 

1211-34-11 

Thigh Frame 

1 

N 

58-56 

Edge Cover 

1.3’ 

AE 

1211-34-23 

Midsection Supt. 

1 


45 




Crank Knee Gatch Assembly (Fiberresin) 



Item Part No. 

A (page 45) 

B 1010-334-27 

C 1010-334-28 

D 1010-334-126 

E 25-50 


Part Name Qty. 

Knee Gatch Assembly 1 

Midsection Skin 1 

Thigh Skin 1 

Calf Skin 1 

Pop Rivet 31 


46 


Knee Gatch Crankscrew Assembly 



Assembly part number 1001-34-19 



Item 

Part No. 

Part Name 

Qty. 

A 

946-33-18 

Crank Disk 

1 

B 

1550-1-16 

Crank Assembly 

1 

C 

26-45 

Roll Pin 

1 

D 

26-14 

Roll Pin 

2 

E 

81-176 

Thrust Washer 

1 

F 

81-175 

Thrust Bearing 

1 

H 

81-174 

Thrust Washer 

2 

J 

938-1-175 

Bearing Assembly 

1 

K 

938-1-177 

Knob 

1 

L 

378-24-29 

Shoulder Bolt 

1 

M 

16-5 

Conelock Nut 

1 

N 

1001-34-47 

Knee Gatch Screw 

1 

P 

1510-34-84 

Screw Cover Assembly 

1 

R 

1510-34-55 

Gatch Drive Tube Assembly 

1 

S 

26-10 

Roll Pin 

2 

T 

7900-1-102 

Velcro Pile Tape 

1 

W 

1550-1-14 

Magnet 

1 

Y 

4-7 

Soc. Head Cap Screw 

1 


47 



Pneumatic Fowler to Frame Assembly 



Item 

Part No. 

Part Name 

Qty. 

A 

4-182 

But. Hd. Cap Screw 

2 

B 

4-183 

But. Hd. Cap Screw 

2 

C 

11-179 

Nylon Washer 

2 

D 

14-21 

Nylon Washer 

8 

E 

16-11 

Nylock Hex Nut 

2 

F 

16-35 

Nylock Hex Nut 

2 

H 

23-100 

Self-Tapping Screw 

2 

J 

25-50 

Pop Rivet 

7 

K 

1211-31-31 

Pneumatic Fowler Rest 

2 

L 

1010-31-78 

Gas Cylinder 

2 

M 

(page 49) 

Pneumatic Fowler Ass’y 

1 

N 

15-59 

Hex Jam Nut 

2 


48 



Pneumatic Fowler Assembly (Fiberresin) 



Item 

Part No. 

Part Name 

Qty. 

A 

4-161 

Hex Soc. But. Hd. Cap Screw 

2 

B 

7-20 

Truss Hd. Mach. Screw 

4 

C 

25-124 

Pop Rivet 

2 

D 

15-37 

Jam Nut 

2 

E 

15-50 

Hex Nut 

2 

F 

16-28 

Nylock Nut 

6 

H 

21-125 

Set Screw 

2 

J 

21-126 

Set Screw 

2 

K 

1001-1-36 

Hole Plug 

2 

L 

1001-31-13 

Fowler Tube 

1 

M 

1010-231-12 

Fowler Skin (Fiberresin) 

1 

N 

(page 49.1) 

Outer Housing Ass’y, Right 

1 

P 

(page 49.1) 

Outer Housing Ass’y, Left 

1 

R 

1210-31-118 

Trip Bar Assembly 

1 


49 




< co o a) < ca o 


Outer Housing Assembly, Right and Left 


Assembly part number 1210-31-106 (Right) 



Item Part No. Part Name Qty. 

25-144 Semi-Tubular Rivet 1 

1210-31-103 Pivot Tab 1 

1210-31-104 Outer Housing, Right 1 



Part No. Part Name Qty. 

25-144 Semi-Tubular Rivet 1 

1210-31-103 Pivot Tab 1 

1210-31-105 Outer Housing, Left 1 


49.1 



Notes 


49.2 



Crank Fowler Assembly (Fiberresin) 



Item 

Part No. 

Part Name 

Qty. 

A 

4-97 

Hex But. Hd. Cap Screw 

6 

B 

4-183 

But. Hd. Cap Screw 

2 

C 

7-20 

Truss Hd. Mach. Screw 

8 

D 

8-15 

Shoulder Bolt 

2 

E 

11-179 

Washer 

2 

F 

14-3 

Thrust Washer 

8 

H 

14-21 

Washer 

2 

J 

16-11 

Nylock Hex Nut 

2 

K 

16-28 

Fiberlock Hex Nut 

16 

L 

23-100 

Ph. Hd. Self-Tap. Screw 

4 


Item Part No. Part Name Qty. 

M 25-50 Pop Rivet 7 

N 946-1-64 Fowler Operation Label 1 

P 1001-1-36 Hole Plug 2 

R 1001-31-13 Fowler Tube 1 

S 1001-31-31 Pneumatic Fowler Rest 2 

T 1001-33-24 Fowler Lever Assembly 1 

W (page 51) Crankscrew Assembly 1 

Y 1010-231-12 Fowler Skin (Fiberresin) 1 

Z 1010-234-15 Mounting Bracket Ass’y 

AA 1550-33-31 Fowler Support Ass’y 


50 


i\3 ro 


Fowler Crankscrew Assembly 




Item 

Part No. 

Part Name 

Qty. 

A 

1001-33-26 

Drive Bar Assembly 

1 

B 

1550-1-16 

Crank Assembly 

1 

C 

946-33-18 

Crank Disc 

1 

D 

938-1-177 

Knob 

1 

E 

16-5 

Kep Nut 

1 

F 

378-24-29 

Shoulder Bolt 

1 

H 

946-33-35 

Fowler Screw 

1 

J 

26-14 

Roll Pin 

2 

K 

81-174 

Thrust Washer 

2 

L 

938-1-175 

Bearing Assembly 

1 

M 

81-176 

Thrust Washer 

1 

N 

81-175 

Thrust Bearing 

1 

P 

1510-34-84 

Screw Cover Assembly 

1 

R 

1550-1-14 

Magnet 

1 

S 

26-10 

Roll Pin 

1 

T 

4-7 

Soc. Fid. Cap Screw 

1 

W 

26-45 

Roll Pin 

1 

Y 

7900-1-102 

Velcro Pile 

1 


51 











2-Stage I.V. Mounting Assembly 


Assembly part number 1001-81 & 1001-82 




Item 

Part No. 

Part Name 

Qty. 

A 

(page 54) 

I.V. Pole Assembly 

1 

B 

1001-59-12 

I.V. Clip 

1 

C 

1001-259-17 

Socket Ass’y, Left 

1 

D 

4-91 

But. Hd. Cap Screw 

1 

E 

16-28 

Nylock Hex Nut 

3 

F 

4-161 

Button Hd. Cap Screw 

3 

H 

4-169 

Soc. Hd. Cap Screw 

1 

J 

16-3 

Fiberlock Hex Nut 

1 

K 

11-16 

Washer 

1 

L 

1001-1-56 

Round Hook Protector 

1 

M 

1001-1-58 

Hook Protector, Rt. 

1* 

N 

16-20 

Self-Locking Nut 

1 

P 

52-291 

Spacer (not shown) 

1 


* Used only on 1001-81. 


53 



2-Stage I.V. Pole Assembly 


Assembly part number 1211-110-10 



[_ RING ORIENTATION _J 


Item 

Part No. 

Part Name 

Qty. 

A 

1001-59-32 

Base Tube Assembly 

1 

B 

1001-59-31 

Extension Tube Assembly 

1 

D 

1210-110-47 

Lock Ring 

1 

E 

1210-110-49 

Lock Actuator 

1 

H 

14-20 

Nylon Flat Washer 

As Req’d 

J 

1010-59-16 

I.V. Hook 

2 

K 

52-17 

Nylon Spacer 

2 

L 

926-400-62 

Stop Sleeve 

1 

M 

1210-110-46 

Back-Up Ring 

1 

N 

8-31 

Shoulder Bolt 

1 





3-Stage I.V. Mounting Assembly 


Assembly part numbers 1001-61 & 1001-62 



Item 

Part No. 

Part Name 

Qty. 

A 

(page 56) 

I.V. Pole Assembly 

1 

B 

1001-59-12 

I.V. Clip 

1 

C 

1001-259-17 

Socket Assembly 

1 

D 

4-91 

But. Hd. Cap Screw 

1 

E 

16-28 

Nylock Hex Nut 

3 

F 

4-161 

Button Hd. Cap Screw 

3 

H 

4-26 

Soc. Hd. Cap Screw 

1 

J 

16-3 

Fiberlock Hex Nut 

1 

K 

11-16 

Washer 

1 

L 

1001-1-56 

Round Hook Protector 

1 

M 

1001-1-58 

Hook Protector 

1* 

N 

16-20 

Self-Locking Nut 

1 


* Used only on 1001-61 and 1501-61. 


55 





2nd Stage Assembly 



Item 


Part No. 


Part Name 


Qty. 


A 

C 

D 

E 


721-61-30 

1210-110-46 

1210-110-47 

1210-110-49 


2nd Tube Assembly 
Back-Up Ring 
Lock Ring 
Lock Actuator 


1 

1 

1 

1 


57 











3rd Stage Assembly 



Item 

A 

B 

C 

D 

E 

F 

G 

H 


Part No. 

38-303 

1010-61-13 

1010-61-15 

1010-61-16 

1010-61-17 

1010-61-18 

1001-61-119 

31-21 


Part Name 

Spring 

Ball Retainer 
Stop Nut 
Retaining Shaft 
Thumb Knob 
Hand Guard 
3rd Extension Rod 
Ball 


Qty. 

1 

1 

1 

1 

1 

1 

1 

6 


58 


Tethered I.V. Pole Mounting Assembly 



Item 

Part No. 

Part Name 

A 

(page 60) 

Trough Assembly 

B 

(page 61) 

I.V. Pole Assembly 

C 

34-22 

Cord Clamp 

D 

25-79 

Pop Rivet 

E 

4-85 

Soc. Hd. Cap Screw 

F 

16-3 

Nylock Nut 


59 


FO FO 


Tethered I.V. Pole Trough Assembly 



Item Part No. Part Name Qty. 

A 1001-87-23 Machined Sleeve 1 

B 1001-87-16 Front Mounting Bracket 1 

C 1001-87-15 Mounting Bracket Ass’y 1 

D 1-22 Flat Hd. Mach. Screw 2 

E 37-2 Tube Plug 2 

F 946-40-110 Lock Clip 1 

H 16-14 Dynalock Hex Nut 2 


60 



Tethered I.V. Pole Assembly 



Item Part No. 

A (page 62) 

C 1010-22-27 

D 741-47-14 

E 21-16 


Part Name Qty. 

I.V. Holder 1 

Cable Assembly 1 

Retainer 1 

Set Screw 2 


61 



< CD O 


I.V. Holder Assembly 



Item Part No. Part Name Qty. 

1010-22-44 Pole Socket Assembly 1 

1010-22-42 Pole Assembly 1 

24-53 Knob 1 


62 




Fowler X-Ray Cassette Assembly 


Assembly part number 1001-23-10 



Item 

Part No. 

A 

1001-23-12 

B 

1020-23-16 

C 

1001-23-14 

D 

926-23-64 

E 

1010-23-37 

F 

1020-23-21 

H 

1010-23-28 

J 

926-23-70 

K 

926-23-69 

L 

14-3 

M 

38-122 

N 

1020-23-26 

P 

1020-23-19 

R 

1020-23-20 

S 

926-23-71 

T 

1-20 

W 

4-149 

Y 

1-22 

Z 

16-3 

AA 

1010-23-19 

AB 

1001-23-25 


Part Name Qty. 

Tray 1 

Post Housing 1 

Actuating Rod 
Post 

Rod Guide 
Knob 1 

Tray Angle 1 

Block Assembly 1 

Washer 1 

Washer 1 

Compression Spring 1 

Spacer 2 

Tray Hinge, Right 1 

Tray Hinge, Left 1 

Bushing 1 

Flat Hd. Mach. Screw 2 

Button Hd. Cap Screw 4 

Flat Hd. Mach. Screw 4 

Nylock Hex Nut 4 

Instruction Label 1 

Specification Label 1 


63 


ro ro fo 


X-Ray Cassette Mounting Assembly 



Item 

A 

B 

C 

D 

E 

F 

H 


Part No. 

(page 63) 

16-3 

4-149 

1001-23-13 

1020-23-13 

1020-23-12 

25-69 


Part Name 

X-Ray Cassette Ass’y 
Self-Locking Nut 
Button Hd. Cap Screw 
Tray Latch 
Tray Hinge, Right 
Tray Hinge, Left 
Pop Rivet 



< CD 


Foot Board/Chartholder Assembly 



Item Part No. Part Name Qty. 

946-28-11 Chart Holder 1 

946-29-6 Foot Board 1 


Upright Oxygen Bottle Holder Assembly 



Item Part No. 

A 1020-30-11 

B 27-12 

D 1020-30-17 


Part Name Qty. 

Upright Bottle Holder 1 

Cotter Pin 1 

Specification Label 1 


65 




Foot Extension/Defibrillator Tray Assembly 



Item 

Part No. 

Part Name 

Qty. 

Item 

Part No. 

Part Name 

Qty. 

A 

8-49 

Socket Hd. Shoulder Bolt 

4 

M 

1010-50-50 

Knob 

2 

B 

14-20 

Nylon Washer 

2 

N 

1010-50-57 

“Max. Weight” Label 

4 

C 

14-21 

Nylon Washer 

2 

P 

1010-50-205 

Cushion Assembly 

1 

D 

16-28 

Fiberlock Nut 

4 

R 

1010-50-218 

Foot & Tray Board 

1 

E 

37-52 

Rubber Bumper 

22 

S 

1010-50-225 

Pivot Frame Weldment 

1 

F 

38-133 

Spring 

2 

T 

1010-50-242 

Pin Lock 

1 

H 

52-17 

Spacer 

4 

W 

1010-50-246 

Base Mounting Ass’y 

1 

J 

1010-50-17 

Specification Label 

1 

Y 

1010-50-248 

Lower Pin Lock 

1 

K 

1010-50-19 

“Push/Pull” Label 

1 

Z 

1010-50-250 

Pin Adjuster 

1 

L 

1010-50-21 

Long Strap 

1 

AA 

42-6 

Collar 

2 





AB 

721-31-65 

Hole Plug 

2 


* Replacement part number 1010-50-100. 


66 





Defibrillator Tray Assembly 



Item 

Part No. 

Part Name 

Qty. 

Item 

Part No. 

Part Name 

A 

946-39-4 

Tray 

1 

K 

926-1-82 

Label 

B 

926-39-16 

Crosstube 

3 

L 

390-57-12 

Long Strap 

C 

25-55 

Rivet 

4 

M 

390-57-13 

Short Strap 

D 

926-39-9 

Cover 

1 

N 

946-1-283 

Label 

E 

18-6 

Umbrella Nut 

6 

P 

926-39-15 

Holder 

F 

7900-1-143 

Dual Lock 

6 

R 

2-44 

Screw 

H 

7900-1-145 

Dual Lock 

6 

S 

2-25 

Screw 

J 

946-39-3 

Support Tube 

2 





67 


q ro ro 



Heel Stirrup and Support Assembly 



Item 

Part No. 

Part Name 

Qty. 

A 

(page 69) 

Stirrup Support Ass’y, Fit. 

1 

B 

(page 70) 

Stirrup Support Ass’y, Lt. 

1 

C 

(page 71) 

Stirrup Assembly 

2 

D 

22-8 

Drive Screw 

4 

E 

3-78 

Hex Hd. Cap Screw 

4 

F 

16-28 

Nylock Hex Nut 

4 

H 

11-158 

Flat Washer 

4 

K 

25-79 

Pop Rivet 

4 


68 



Right Stirrup Support Assembly 



Item 

Part No. 

Part Name 

Qty. 

A 

1010-55-16 

Right Support Tube Ass’y 

1 

B 

1001-55-11 

Mounting Bracket 

1 

C 

650-2-32 

Lock Screw Assembly 

1 

D 

966-51-19 

Wedge Lock, Modified 

1 

E 

38-171 

Compression Spring 

1 

F 

26-7 

Roll Pin 

1 

H 

14-40 

Nylon Flat Washer 

1 

J 

24-11 

Knob 

1 


69 






Left Stirrup Support Assembly 



Item 

Part No. 

Part Name 

Qty. 

A 

1010-55-26 

Left Support Tube Ass’y 

1 

B 

1001-55-11 

Mounting Bracket 

1 

C 

650-2-32 

Lock Screw Assembly 

1 

D 

966-51-19 

Wedge Lock, Modified 

1 

E 

38-171 

Compression Spring 

1 

F 

26-7 

Roll Pin 

1 

H 

14-40 

Nylon Flat Washer 

1 

J 

24-11 

Knob 

1 


70 





Heel Stirrup Assembly 


Assembly part number 1001-55-29 



Qty. 

1 

1 

1 

1 

1 


Item 

A 

B 

C 

D 

E 


Part No. 

390-20-13 

390-20-9 

1010-55-30 

24-11 

26-43 


Part Name 

Stirrup 

Stirrup Holder Assembly 
Extension Tube Assembly 
Knob 
Roll Pin 


71 


CcDOQluilOI 


C-Spine Cassette Holder Assembly 



Part No. 

Part Name 

Qty. 

1010-70-25 

I.V. Adaptor 

2 

1010-70-18 

Specification Label 

1 

11-3 

Flat Washer 

2 

4-91 

Soc. Hd. Cap Screw 

2 

(page 73) 

Support Pole Assembly 

1 

(page 74) 

Storage Bracket Ass’y 

1 

16-5 

Conelock Nut 

4 

3-50 

Hex Hd. Cap Screw 

4 

1001-70-11 

Attachment Bracket 

1 


72 


C-Spine Support Pole Assembly 



Item 

Part No. 

Part Name 

Qty. 

A 

1010-70-33 

Support Tube Cap 

1 

B 

26-6 

Roll Pin 

1 

C 

1010-70-34 

Support Arm Weldment 

1 

D 

1010-70-42 

Cassette Holder Weldment 

1 

E 

1010-70-50 

Adjustment Tube Weldment 

1 

F 

1010-70-30 

Base Tube Weldment 

1 

G 

1010-70-45 

Knob 

3 

H 

25-55 

Pop Rivet 

1 

J 

1010-70-44 

Pivot Pin 

1 

K 

26-5 

Roll Pin 

1 


73 



C-Spine Storage Bracket Assembly 


Assembly part number 
1010-70-19 



Item Part No. 

A 1010-70-20 

B 1010-70-45 

C 1010-70-23 


Part Name Qty. 

Storage Bracket Weldment 1 

Knob 1 

Storage Label 1 


74 






Replacement Parts 


PART NAME PART NUMBER 


3” Low Friction Mattress. 1059-326-40 

4” Low Friction Mattress . 1059-426-40 

3” Enhanced Comfort Mattress. 1001-48-6 

4” Enhanced Comfort Mattress. 1001-47-6 

Folddown Siderail Pads.1010-52 

Hydraulic Jack.1210-70-10 

Standard Removable I.V. Pole. 390-25 

Tethered I.V. Pole . 1001-87-20 

2-Stage Permanently Attached I.V. Pole, Plead End.1001-81 

2- Stage Permanently Attached I.V. Pole, Foot End.1001-82 

3- Stage Permanently Attached I.V. Pole, Plead End.1001-61 

3-Stage Permanently Attached I.V. Pole, Foot End.1001-62 

2 Piece Restraint Strap . 390-19 

Ankle Restraint Strap. 946-43-100 

Chest Restraint Strap.1010-58 

Wrist Restraint Strap. 946-44-100 

Defibrillator/Equipment Tray . 926-39 

Foot Board/Chartholder. 926-40 

Head/Foot Board Assembly (2) . 946-29-100 

Head Board/Push Bar Assembly . 1001-155 

Heel Stirrups .1001-55 

C-Spine Cassette Holder .1001-70 

Foot Extension/Defibrillator Tray Assembly .1010-50-100 

I.V. Caddy. 1050-1-100 

Upright Oxygen Bottle Holder Assembly. 1020-30 

Instrument/Serving Tray. 1052-26 

Wheel Cover Replacement Kit. 1010-56-200 

Fowler X-Ray Cassette Tray . 1001-23-10 

Foot End Steer Handles .1212-151 

Head End Steer Handles.1212-152 


75 

































Warranty 


Limited Warranty: 

Stryker Patient Care Division, a division of Stryker Corporation, warrants to the original purchaser that the 
1210, 1211, 1212, 1710 and 1711 stretchers should be free from defects in material and workmanship for a 
period of three (3) years after date of delivery. Stryker’s obligation under this warranty is expressly limited 
to supplying replacement parts for three years and labor for one year, or replacing, at its option, any product 
which is, in the sole discretion of Stryker, found to be defective. Stryker warrants to the original purchaser 
that the frame and welds on its beds will be free from structural defects for as long as the original purchaser 
owns the bed. If requested by Stryker, products or parts for which a warranty claim is made shall be returned 
prepaid to Stryker’s factory. Any improper use or any alteration or repair by others in such manner as in Stryk¬ 
er’s judgement affects the product materially and adversely shall void this warranty. No employee or repre¬ 
sentative of Stryker is authorized to change this warranty in any way. 

Stryker Medical stretchers are designed for a 10 year expected life under normal use conditions and appropri¬ 
ate periodic maintenance as described in the maintenance manual for each device. 

This statement constitutes Stryker’s entire warranty with respect to the aforesaid equipment. STRYKER 
MAKES NO OTHER WARRANTY OR REPRESENTATION, EITHER EXPRESSED OR IMPLIED, EXCEPT 
AS SET FORTH HEREIN. THERE IS NO WARRANTY OF MERCHANTABILITY AND THERE ARE NO 
WARRANTIES OF FITNESS FOR ANY PARTICULAR PURPOSE. IN NO EVENT SHALL STRYKER BE 
LIABLE HEREUNDER FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM OR IN ANY 
MANNER RELATED TO SALES OR USE OF ANY SUCH EQUIPMENT. 

To Obtain Parts and Service: 

Stryker products are supported by a nationwide network of dedicated Stryker Field Service Representatives. 
These representatives are factory trained, available locally, and carry a substantial spare parts inventory to 
minimize repair time. Simply call your local representative, or call Stryker Customer Service at (800) 
327-0770. 

Supplemental Warranty Coverage: 

Stryker has developed a comprehensive program of extended warranty options designed to keep your equip¬ 
ment operating at peak performance at the same time it eliminates unexpected costs. We recommend that 
these programs be activated before the expiration of the new product warranty to eliminate the potential of 
additional equipment upgrade charges. Stryker offers the following Supplemental Warranties: 

Extended (Parts and Labor) 

• All replacement parts (excluding mattresses and consumable items) 

• Labor and travel for all scheduled and unscheduled calls 

• Biannual Preventative Maintenance Inspections and repairs 

• JCAHO paperwork for preventative maintenance 

• Priority Emergency Service 

Standard (Labor Only): 

• Labor and travel for all scheduled and unscheduled calls 

• Biannual Preventative Maintenance Inspections and repairs 

• JCAHO paperwork for preventative maintenance 

• Priority Emergency Service 

Basic (Parts Only): 

• All replacement parts (excluding mattresses and consumable items) 

• Priority Emergency Service 


76 





Warranty 


Return Authorization: 

Merchandise cannot be returned without approval from the Stryker Customer Service Department. An autho¬ 
rization number will be provided which must be printed on the returned merchandise. Stryker reserves the 
right to charge shipping and restocking fees on returned items. 

SPECIAL, MODIFIED, OR DISCONTINUED ITEMS NOT SUBJECT TO RETURN. 

Damaged Merchandise: 

ICC Regulations require that claims for damaged merchandise must be made with the carrier within fifteen 
(15) days of receipt of merchandise. DO NOT ACCEPT DAMAGED SHIPMENTS UNLESS SUCH DAMAGE 
IS NOTED ON THE DELIVERY RECEIPT AT THE TIME OF RECEIPT. Stryker Customer Service must be 
notified immediately. Stryker will aid the customer in filing a freight claim with the appropriate carrier for dam¬ 
ages incurred. Claim will be limited in amount to the actual replacement cost. In the event that this information 
is not received by Stryker within the fifteen (15) day period following the delivery of the merchandise, or the 
damage was not noted on the delivery receipt at the time of receipt, the customer will be responsible for pay¬ 
ment of the original invoice in full. 

Claims for any short shipment must be made within thirty (30) days of invoice. 

Please call your local representative, or call (800) 327-0770 for further information 


77 




stnyken 

Patient; Handling 

6300 Sprinkle Road, Kalamazoo, Ml 49001-9799 (800) 327-0770 


DH 11/94 1212-90-3 REV